Gordon P. Warn
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Gordon P. Warn has a total of 34 co-authors. Here are the top co-authors by number of shared publications:
Navid Changizi
Department of Civil and Environmental Engineering The Pennsylvania State University University Park Pennsylvania USA
4 shared publications- Maximilian E. Ororbia
The Pennsylvania State University Department of Civil Engineering University Park, PA 16802
3 shared publications - Mehmet Unal
Civil and Environmental Engineering, The Pennsylvania State University, University Park, PA 16802
3 shared publications - Rui Zhang
Department of Disaster Mitigation for Structures, Tongji University, Shanghai 200092, China
2 shared publications Aleksandra Radlińska
1 shared publication- Aleksandra Radlińska
Department of Civil and Environmental Engineering, The Pennsylvania State University, University Park, USA
1 shared publication
Latest Publications
- Open Access
- 1 January 2026
- Published by Wiley in Structural Control and Health Monitoring
- Vol. 2026 (1) , 8695387
Effect of Displacement‐Dependent Stiffness Devices on Seismic Performance of Isolated Bridges
Seismic isolation systems have been employed in bridges to increase their lateral flexibility and thereby improve their performance by reflecting seismic energy away from the structure. In recent years, stiffness devices that could passively generate both positive and negative tangential stiffness that varies with displacement were introduced within bridge isolation systems in an attempt to further improve seismic performance by reducing their lateral stiffness to near‐zero values and thus increasing the fundamental natural period to near‐infinity. Previous investigations on such displacement‐dependent stiffness devices have focused on their effect on the seismic response of existing bridges, where design parameters that characterize the behavior of stiffness devices often had values from preliminary designs or, at best, values obtained from sensitivity studies. A potentially different level of performance could be realized in the design of a new bridge if the isolation system components (bearings, dampers, and stiffness devices) were designed simultaneously through optimization. This study concentrates on an evaluation of the effectiveness of displacement‐dependent stiffness devices in improving the response of a bridge with a well‐designed (optimized) seismic isolation system. A design framework is developed that optimizes configurations of the isolation system for multiple performance objectives. It is found that for a bridge with an isolation system comprised only of lead‐rubber bearings, the inclusion of stiffness devices can, in certain cases, result in improved seismic performance. In contrast, for a bridge with a high‐performance isolation system comprised of lead‐rubber bearings and dampers, the inclusion of stiffness devices provides negligible improvement in seismic performance.
- 1 January 2026
- Published by Wiley in Structural Control and Health Monitoring
- Vol. 2026 (1) , 8695387
Open AccessEffect of Displacement‐Dependent Stiffness Devices on Seismic Performance of Isolated Bridges
Seismic isolation systems have been employed in bridges to increase their lateral flexibility and thereby improve their performance by reflecting seismic energy away from the structure. In recent years, stiffness devices that could passively generate both positive and negative tangential stiffness that varies with displacement were introduced within bridge isolation systems in an attempt to further improve seismic performance by reducing their lateral stiffness to near‐zero values and thus increasing the fundamental natural period to near‐infinity. Previous investigations on such displacement‐dependent stiffness devices have focused on their effect on the seismic response of existing bridges, where design parameters that characterize the behavior of stiffness devices often had values from preliminary designs or, at best, values obtained from sensitivity studies. A potentially different level of performance could be realized in the design of a new bridge if the isolation system components (bearings, dampers, and stiffness devices) were designed simultaneously through optimization. This study concentrates on an evaluation of the effectiveness of displacement‐dependent stiffness devices in improving the response of a bridge with a well‐designed (optimized) seismic isolation system. A design framework is developed that optimizes configurations of the isolation system for multiple performance objectives. It is found that for a bridge with an isolation system comprised only of lead‐rubber bearings, the inclusion of stiffness devices can, in certain cases, result in improved seismic performance. In contrast, for a bridge with a high‐performance isolation system comprised of lead‐rubber bearings and dampers, the inclusion of stiffness devices provides negligible improvement in seismic performance.
- Open Access
- 17 September 2025
- Published by Elsevier in Engineering Structures
- Vol. 344
Self-adaptive physics-informed parallel neural networks for creep damage identification
- 17 September 2025
- Published by Elsevier in Engineering Structures
- Vol. 344
Open AccessSelf-adaptive physics-informed parallel neural networks for creep damage identification
- Open Access
- 27 January 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-18
Optimal life-cycle adaptation of coastal infrastructure under climate change
Climate change-related risk mitigation is typically addressed using cost-benefit analysis that evaluates mitigation strategies against a wide range of simulated scenarios and identifies a static policy to be implemented, without considering future observations. Due to the substantial uncertainties inherent in climate projections, this identified policy will likely be sub-optimal with respect to the actual climate trajectory that evolves in time. In this work, we thus formulate climate risk management as a dynamic decision-making problem based on Markov Decision Processes (MDPs) and Partially Observable MDPs (POMDPs), taking real-time data into account for evaluating the evolving conditions and related model uncertainties, in order to select the best possible life-cycle actions in time, with global optimality guarantees for the formulated optimization problem. The framework is developed for coastal adaptation applications, considering a wide variety of possible action types, including various forms of nature-based infrastructure. Related environmental impacts of carbon emissions and uptake are also incorporated, and social cost of carbon implications are discussed, together with several future directions and supported features.
- 27 January 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-18
Open AccessOptimal life-cycle adaptation of coastal infrastructure under climate change
Climate change-related risk mitigation is typically addressed using cost-benefit analysis that evaluates mitigation strategies against a wide range of simulated scenarios and identifies a static policy to be implemented, without considering future observations. Due to the substantial uncertainties inherent in climate projections, this identified policy will likely be sub-optimal with respect to the actual climate trajectory that evolves in time. In this work, we thus formulate climate risk management as a dynamic decision-making problem based on Markov Decision Processes (MDPs) and Partially Observable MDPs (POMDPs), taking real-time data into account for evaluating the evolving conditions and related model uncertainties, in order to select the best possible life-cycle actions in time, with global optimality guarantees for the formulated optimization problem. The framework is developed for coastal adaptation applications, considering a wide variety of possible action types, including various forms of nature-based infrastructure. Related environmental impacts of carbon emissions and uptake are also incorporated, and social cost of carbon implications are discussed, together with several future directions and supported features.
- 2 November 2023
- Published by Elsevier in Journal of Sound and Vibration
- Vol. 571
Dual state-parameter estimation of continuous structural systems with physics-informed parallel neural networks
- 2 November 2023
- Published by Elsevier in Journal of Sound and Vibration
- Vol. 571
Dual state-parameter estimation of continuous structural systems with physics-informed parallel neural networks
- 10 February 2023
- Published by Wiley in Journal of Mechanical Design
- Vol. 145 (6) , 1-19
Design Synthesis of Structural Systems as a Markov Decision Process Solved With Deep Reinforcement Learning
Recently, it was demonstrated that the design synthesis of truss structures can be modeled as a Markov decision process (MDP) and solved using a tabular reinforcement learning method. In this setting, each state corresponds to a specific design configuration represented as a finite graph. However, when the structural design domain is relatively large, and depending on the constraints, the dimensionality of the state space becomes quite large rendering tabular reinforcement learning algorithms inefficient. Hence, in this study, the design synthesis MDP framework is significantly extended to solve structural design problems with large state spaces, by integrating deep reinforcement learning (DRL) into the general MDP framework. This is beneficial because with DRL, a deep neural network can be used to approximate the state-action value function, such that the network has much fewer parameters than the cardinality of the state space. This parameterization relies upon a problem relevant set of features and reward function. Thus, for this extended DRL design synthesis (DRLDS) framework, a compact set of features and a reward function are devised that are suitable for structural design problems where structural configurations are represented as finite graphs. Through the application of seven different structural design synthesis examples, the DRLDS framework is demonstrated to be capable of adeptly learning optimal policies that synthesize high, if not the highest, performing design solutions more frequently. The DRLDS framework does this with fewer finite element model evaluations than other considered alternative methods, further demonstrating the effectiveness of the developed set of features and reward function.
- 10 February 2023
- Published by Wiley in Journal of Mechanical Design
- Vol. 145 (6) , 1-19
Design Synthesis of Structural Systems as a Markov Decision Process Solved With Deep Reinforcement Learning
Recently, it was demonstrated that the design synthesis of truss structures can be modeled as a Markov decision process (MDP) and solved using a tabular reinforcement learning method. In this setting, each state corresponds to a specific design configuration represented as a finite graph. However, when the structural design domain is relatively large, and depending on the constraints, the dimensionality of the state space becomes quite large rendering tabular reinforcement learning algorithms inefficient. Hence, in this study, the design synthesis MDP framework is significantly extended to solve structural design problems with large state spaces, by integrating deep reinforcement learning (DRL) into the general MDP framework. This is beneficial because with DRL, a deep neural network can be used to approximate the state-action value function, such that the network has much fewer parameters than the cardinality of the state space. This parameterization relies upon a problem relevant set of features and reward function. Thus, for this extended DRL design synthesis (DRLDS) framework, a compact set of features and a reward function are devised that are suitable for structural design problems where structural configurations are represented as finite graphs. Through the application of seven different structural design synthesis examples, the DRLDS framework is demonstrated to be capable of adeptly learning optimal policies that synthesize high, if not the highest, performing design solutions more frequently. The DRLDS framework does this with fewer finite element model evaluations than other considered alternative methods, further demonstrating the effectiveness of the developed set of features and reward function.
- 20 June 2022
- Published by Wiley in International Journal for Numerical Methods in Engineering
- Vol. 123 (19) , 4562-4585
Topology optimization of structural frames based on a nonlinear Timoshenko beam finite element considering full interaction
This article presents an approach for the topology optimization of frame structures composed of nonlinear Timoshenko beam finite elements (FEs) under time‐varying excitation. Material nonlinearity is considered with a nonlinear Timoshenko beam FE model that accounts for distributed plasticity and axial–shear–moment interactions through appropriate hysteretic interpolation functions and a yield/capacity function, respectively. Hysteretic variables for curvature, shear, and axial deformations represent the nonlinearities and evolve according to first‐order nonlinear ordinary differential equations (ODEs). Owing to the first‐order representation, the governing dynamic equilibrium equations, and hysteretic evolution equations can thus be concisely presented as a combined system of first‐order nonlinear ODEs that can be solved using a general ODE solver. This avoids divergence due to an ill‐conditioned stiffness matrix that can commonly occur with Newmark–Newton solution schemes that rely upon linearization. The approach is illustrated for a volume minimization design problem, subject to dynamic excitation where an approximation for the maximum displacement at specified nodes is constrained to a given limit, that is, a drift ratio. The maximum displacement is approximated using the p‐norm, thus facilitating the derivation of the analytical sensitivities for gradient‐based optimization. The proposed approach is demonstrated through several numerical examples for the design of structural frames subjected to sinusoidal base excitation.
- 20 June 2022
- Published by Wiley in International Journal for Numerical Methods in Engineering
- Vol. 123 (19) , 4562-4585
Topology optimization of structural frames based on a nonlinear Timoshenko beam finite element considering full interaction
This article presents an approach for the topology optimization of frame structures composed of nonlinear Timoshenko beam finite elements (FEs) under time‐varying excitation. Material nonlinearity is considered with a nonlinear Timoshenko beam FE model that accounts for distributed plasticity and axial–shear–moment interactions through appropriate hysteretic interpolation functions and a yield/capacity function, respectively. Hysteretic variables for curvature, shear, and axial deformations represent the nonlinearities and evolve according to first‐order nonlinear ordinary differential equations (ODEs). Owing to the first‐order representation, the governing dynamic equilibrium equations, and hysteretic evolution equations can thus be concisely presented as a combined system of first‐order nonlinear ODEs that can be solved using a general ODE solver. This avoids divergence due to an ill‐conditioned stiffness matrix that can commonly occur with Newmark–Newton solution schemes that rely upon linearization. The approach is illustrated for a volume minimization design problem, subject to dynamic excitation where an approximation for the maximum displacement at specified nodes is constrained to a given limit, that is, a drift ratio. The maximum displacement is approximated using the p‐norm, thus facilitating the derivation of the analytical sensitivities for gradient‐based optimization. The proposed approach is demonstrated through several numerical examples for the design of structural frames subjected to sinusoidal base excitation.
- 21 July 2021
- Published by Wiley in Journal of Computing and Information Science in Engineering
- Vol. 22 (2)
Design Synthesis Through a Markov Decision Process and Reinforcement Learning Framework
This article presents a framework that mathematically models optimal design synthesis as a Markov Decision Process (MDP) that is solved with reinforcement learning. In this context, the states correspond to specific design configurations, the actions correspond to the available alterations modeled after generative design grammars, and the immediate rewards are constructed to be related to the improvement in the altered configuration’s performance with respect to the design objective. Since in the context of optimal design synthesis the immediate rewards are in general not known at the onset of the process, reinforcement learning is employed to efficiently solve the MDP. The goal of the reinforcement learning agent is to maximize the cumulative rewards and hence synthesize the best performing or optimal design. The framework is demonstrated for the optimization of planar trusses with binary cross-sectional areas, and its utility is investigated with four numerical examples, each with a unique combination of domain, constraint, and external force(s) considering both linear-elastic and elastic-plastic material behaviors. The design solutions obtained with the framework are also compared with other methods in order to demonstrate its efficiency and accuracy.
- 21 July 2021
- Published by Wiley in Journal of Computing and Information Science in Engineering
- Vol. 22 (2)
Design Synthesis Through a Markov Decision Process and Reinforcement Learning Framework
This article presents a framework that mathematically models optimal design synthesis as a Markov Decision Process (MDP) that is solved with reinforcement learning. In this context, the states correspond to specific design configurations, the actions correspond to the available alterations modeled after generative design grammars, and the immediate rewards are constructed to be related to the improvement in the altered configuration’s performance with respect to the design objective. Since in the context of optimal design synthesis the immediate rewards are in general not known at the onset of the process, reinforcement learning is employed to efficiently solve the MDP. The goal of the reinforcement learning agent is to maximize the cumulative rewards and hence synthesize the best performing or optimal design. The framework is demonstrated for the optimization of planar trusses with binary cross-sectional areas, and its utility is investigated with four numerical examples, each with a unique combination of domain, constraint, and external force(s) considering both linear-elastic and elastic-plastic material behaviors. The design solutions obtained with the framework are also compared with other methods in order to demonstrate its efficiency and accuracy.
- Open Access
- 16 July 2021
- Published by ASME International
Structural Design Synthesis Through a Sequential Decision Process
This article illustrates that structural topology synthesis can be achieved through a sequential decision process, whereby a sparsely connected seed configuration is sequentially altered through discrete actions to generate the best design solution, with respect to a specific objective and constraints. More specifically, the generative topology synthesis is mathematically
- 16 July 2021
- Published by ASME International
Open AccessStructural Design Synthesis Through a Sequential Decision Process
This article illustrates that structural topology synthesis can be achieved through a sequential decision process, whereby a sparsely connected seed configuration is sequentially altered through discrete actions to generate the best design solution, with respect to a specific objective and constraints. More specifically, the generative topology synthesis is mathematically
- 31 January 2021
- Published by Wiley in International Journal for Numerical Methods in Engineering
- Vol. 122 (11) , 2829-2857
Topology optimization employing a condensation method for nonlinear structural frames with supplemental mass
- 31 January 2021
- Published by Wiley in International Journal for Numerical Methods in Engineering
- Vol. 122 (11) , 2829-2857
Topology optimization employing a condensation method for nonlinear structural frames with supplemental mass
- 9 January 2021
- Published by Springer Nature in Structural and Multidisciplinary Optimization
- Vol. 63 (4) , 1789-1811
Topology optimization of structural frames considering material nonlinearity and time-varying excitation
- 9 January 2021
- Published by Springer Nature in Structural and Multidisciplinary Optimization
- Vol. 63 (4) , 1789-1811
Topology optimization of structural frames considering material nonlinearity and time-varying excitation