Almudena Velazquez Blazquez
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Almudena Velazquez Blazquez has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
Edward Baudrez
10 shared publicationsNicolas Clerbaux
10 shared publicationsCarla Salas Molar
7 shared publicationsCarlos Domenech
GMV, Madrid, Spain
7 shared publicationsNils Madenach
Freie Universität Berlin, Germany
5 shared publications- Edward Baudrez
Royal Meteorological Institute of Belgium, B-1180 Brussels, Belgium
3 shared publications
Latest Publications
- Open Access
- 20 January 2025
- Published by Copernicus GmbH
Radiative fluxes estimation for the Broadband Radiometer (BBR) on EarthCARE: The BMA-FLX product
The Broad-Band Radiometer (BBR) instrument on the EarthCARE satellite will provide accurate outgoing solar and thermal radiances at the Top of the Atmosphere (TOA) obtained in an along track configuration at three fixed viewing directions (nadir, fore and aft).The operational BMA-FLX product on top-of-atmosphere radiative fluxes, is based on a radiance-to-flux conversion algorithm mainly fed by the unfiltered broad-band radiances, obtained in the BM-RAD product, auxiliary data from EarthCARE L2 cloud products and modelled geophysical databases. The conversion algorithm models the angular distribution of the reflected solar radiation and thermal radiation emitted by the Earth-Atmosphere system, and returns geometry independent flux estimates to be used for the radiative closure assessment of the Mission.Different methodologies are employed for the solar and thermal BBR ADMs. Models for SW radiances are created for different scene types and constructed from Clouds and the Earth’s Radiant Energy System (CERES) data using a feed-forward back-propagation artificial neural network (ANN) technique. The LW angular models are derived through multiple regressions on brightness temperatures and brightness temperature differences of the multispectral imager (MSI) 10.8 µm and 12 µm channels, and corresponding LW fluxes obtained by using a large database of LibRadtran and SBDART radiative transfer simulations.Both retrieval algorithms exploit the multi-viewing capability of the BBR by applying the radiance to flux conversion algorithms to each of the BBR views, which have been previously collocated at a reference level in order to minimize parallax effects. The reference height where the three BBR measurements are co-registered corresponds to the height where most reflection or emission takes place and depends on the spectral regime. LW observations are co-registered at the cloud top height while SW reference height is instead selected by minimizing the flux differences between nadir, fore and aft fluxes. The derived fluxes from the collocated views are then combined into a single flux value at the selected reference level.Verification of the algorithms has been carried out using the 3 test scenes developed by the EarthCARE team using the Environment Canada and Climate Change’s Global Environmental Multiscale model (GEM). The BBR solar and thermal flux retrieval algorithms have been successfully employed to retrieve radiative fluxes over the 3 test scenes. Comparisons with the true fluxes from the GEM model provide RMSE < 5 W/m² for the LW fluxes and < 15 W/m² for the SW fluxes.
- 20 January 2025
- Published by Copernicus GmbH
Open AccessRadiative fluxes estimation for the Broadband Radiometer (BBR) on EarthCARE: The BMA-FLX product
The Broad-Band Radiometer (BBR) instrument on the EarthCARE satellite will provide accurate outgoing solar and thermal radiances at the Top of the Atmosphere (TOA) obtained in an along track configuration at three fixed viewing directions (nadir, fore and aft).The operational BMA-FLX product on top-of-atmosphere radiative fluxes, is based on a radiance-to-flux conversion algorithm mainly fed by the unfiltered broad-band radiances, obtained in the BM-RAD product, auxiliary data from EarthCARE L2 cloud products and modelled geophysical databases. The conversion algorithm models the angular distribution of the reflected solar radiation and thermal radiation emitted by the Earth-Atmosphere system, and returns geometry independent flux estimates to be used for the radiative closure assessment of the Mission.Different methodologies are employed for the solar and thermal BBR ADMs. Models for SW radiances are created for different scene types and constructed from Clouds and the Earth’s Radiant Energy System (CERES) data using a feed-forward back-propagation artificial neural network (ANN) technique. The LW angular models are derived through multiple regressions on brightness temperatures and brightness temperature differences of the multispectral imager (MSI) 10.8 µm and 12 µm channels, and corresponding LW fluxes obtained by using a large database of LibRadtran and SBDART radiative transfer simulations.Both retrieval algorithms exploit the multi-viewing capability of the BBR by applying the radiance to flux conversion algorithms to each of the BBR views, which have been previously collocated at a reference level in order to minimize parallax effects. The reference height where the three BBR measurements are co-registered corresponds to the height where most reflection or emission takes place and depends on the spectral regime. LW observations are co-registered at the cloud top height while SW reference height is instead selected by minimizing the flux differences between nadir, fore and aft fluxes. The derived fluxes from the collocated views are then combined into a single flux value at the selected reference level.Verification of the algorithms has been carried out using the 3 test scenes developed by the EarthCARE team using the Environment Canada and Climate Change’s Global Environmental Multiscale model (GEM). The BBR solar and thermal flux retrieval algorithms have been successfully employed to retrieve radiative fluxes over the 3 test scenes. Comparisons with the true fluxes from the GEM model provide RMSE < 5 W/m² for the LW fluxes and < 15 W/m² for the SW fluxes.
- Open Access
- 13 December 2024
- Published by Copernicus GmbH in Atmospheric Measurement Techniques
- Vol. 17 (23) , 7007-7026
Retrieval of top-of-atmosphere fluxes from combined EarthCARE lidar, imager, and broadband radiometer observations: the BMA-FLX product
The Earth Cloud, Aerosol and Radiation Explorer (EarthCARE) satellite mission is expected to provide new insights into aerosols, clouds, and radiation. The satellite's payload includes four instruments designed to synergistically retrieve vertical profiles of clouds and aerosols, along with the atmospheric radiation data. This will enable the determination of atmospheric heating rates and top-of-atmosphere radiances and fluxes. This paper focuses on the BMA-FLX processor, specifically created, developed, and validated to retrieve thermal and solar top-of-atmosphere radiative fluxes from longwave and shortwave radiances, measured along track by the EarthCARE Broad-Band Radiometer (BBR) instrument. These radiances are co-registered either at the surface or, in cloudy conditions, at the radiatively most significant vertical layer of the atmosphere (reference level). The Multi-Spectral Imager (MSI) and Atmospheric Lidar (ATLID) on board EarthCARE support cloud identification, while meteorological data from the European Centre for Medium-Range Weather Forecasts provide the surface and atmospheric necessary information. In the BMA-FLX processor, flux is estimated independently for each BBR view using different approaches for the longwave and shortwave radiances. A combined flux, derived from co-registered radiances at the reference level, is provided as the best estimate for a given scene. The radiance-to-flux conversion algorithms have been successfully validated through end-to-end verification using L1 and L2 synthetic data for three EarthCARE orbits. In general, a good agreement is found between the retrieved fluxes and the model truth, with root mean square errors (RMSEs) varying between 7 and 18 W m−2 for the solar fluxes and lower than 6 W m−2 for the thermal fluxes. The BMA-FLX's objective is to achieve radiative closure for EarthCARE with solar and thermal fluxes within 10 W m−2.
- 13 December 2024
- Published by Copernicus GmbH in Atmospheric Measurement Techniques
- Vol. 17 (23) , 7007-7026
Open AccessRetrieval of top-of-atmosphere fluxes from combined EarthCARE lidar, imager, and broadband radiometer observations: the BMA-FLX product
The Earth Cloud, Aerosol and Radiation Explorer (EarthCARE) satellite mission is expected to provide new insights into aerosols, clouds, and radiation. The satellite's payload includes four instruments designed to synergistically retrieve vertical profiles of clouds and aerosols, along with the atmospheric radiation data. This will enable the determination of atmospheric heating rates and top-of-atmosphere radiances and fluxes. This paper focuses on the BMA-FLX processor, specifically created, developed, and validated to retrieve thermal and solar top-of-atmosphere radiative fluxes from longwave and shortwave radiances, measured along track by the EarthCARE Broad-Band Radiometer (BBR) instrument. These radiances are co-registered either at the surface or, in cloudy conditions, at the radiatively most significant vertical layer of the atmosphere (reference level). The Multi-Spectral Imager (MSI) and Atmospheric Lidar (ATLID) on board EarthCARE support cloud identification, while meteorological data from the European Centre for Medium-Range Weather Forecasts provide the surface and atmospheric necessary information. In the BMA-FLX processor, flux is estimated independently for each BBR view using different approaches for the longwave and shortwave radiances. A combined flux, derived from co-registered radiances at the reference level, is provided as the best estimate for a given scene. The radiance-to-flux conversion algorithms have been successfully validated through end-to-end verification using L1 and L2 synthetic data for three EarthCARE orbits. In general, a good agreement is found between the retrieved fluxes and the model truth, with root mean square errors (RMSEs) varying between 7 and 18 W m−2 for the solar fluxes and lower than 6 W m−2 for the thermal fluxes. The BMA-FLX's objective is to achieve radiative closure for EarthCARE with solar and thermal fluxes within 10 W m−2.
- Open Access
- 2 August 2024
- Published by Copernicus GmbH
- Vol. 2024, 1-26
Reply on RC2
The Earth Cloud, Aerosol and Radiation Explorer (EarthCARE) satellite mission is expected to provide new insights into aerosols, clouds, and radiation. The satellite’s payload include four instruments design to synergistically retrieve vertical profiles of clouds and aerosols, along with the atmospheric radiation data. This will enable the determination of atmospheric heating rates and top-of-atmosphere radiances and fluxes. This paper focuses on the BMA-FLX processor, an algorithm specifically created, developed, and validated to retrieve thermal and solar top-of-atmosphere radiative fluxes from longwave and shortwave radiances, measured along-track by the EarthCARE Broadband Radiometer (BBR) instrument. These measurements are co-registered either at the surface or at the radiatively most significant vertical layer of the atmosphere in cloudy condition (reference level). The Multi-Spectral Imager (MSI) and Atmospheric LiDAR (ATLID) on-board EarthCARE support cloud identification, while meteorological data from the European Centre for Medium-Range Weather Forecasts provide the surface and atmospheric necessary information. In the BMA-FLX processor, flux is estimated independently for each BBR view using different approaches for the longwave and shortwave radiances. A combined flux, derived from co-registered radiances at the reference level, is provided as the best estimate for a given scene. The radiance-to-flux conversion algorithms have been successfully validated through end-to-end verification using L1 and L2 synthetic data for three EarthCARE orbits. The BMA-FLX’s objective is to achieve radiative closure for EarthCARE with solar and thermal fluxes within 10 Wm−2.
- 2 August 2024
- Published by Copernicus GmbH
- Vol. 2024, 1-26
Open AccessReply on RC2
The Earth Cloud, Aerosol and Radiation Explorer (EarthCARE) satellite mission is expected to provide new insights into aerosols, clouds, and radiation. The satellite’s payload include four instruments design to synergistically retrieve vertical profiles of clouds and aerosols, along with the atmospheric radiation data. This will enable the determination of atmospheric heating rates and top-of-atmosphere radiances and fluxes. This paper focuses on the BMA-FLX processor, an algorithm specifically created, developed, and validated to retrieve thermal and solar top-of-atmosphere radiative fluxes from longwave and shortwave radiances, measured along-track by the EarthCARE Broadband Radiometer (BBR) instrument. These measurements are co-registered either at the surface or at the radiatively most significant vertical layer of the atmosphere in cloudy condition (reference level). The Multi-Spectral Imager (MSI) and Atmospheric LiDAR (ATLID) on-board EarthCARE support cloud identification, while meteorological data from the European Centre for Medium-Range Weather Forecasts provide the surface and atmospheric necessary information. In the BMA-FLX processor, flux is estimated independently for each BBR view using different approaches for the longwave and shortwave radiances. A combined flux, derived from co-registered radiances at the reference level, is provided as the best estimate for a given scene. The radiance-to-flux conversion algorithms have been successfully validated through end-to-end verification using L1 and L2 synthetic data for three EarthCARE orbits. The BMA-FLX’s objective is to achieve radiative closure for EarthCARE with solar and thermal fluxes within 10 Wm−2.
- Open Access
- 1 August 2024
- Published by Copernicus GmbH
- Vol. 2024, 1-26
Reply on RC1
The Earth Cloud, Aerosol and Radiation Explorer (EarthCARE) satellite mission is expected to provide new insights into aerosols, clouds, and radiation. The satellite’s payload include four instruments design to synergistically retrieve vertical profiles of clouds and aerosols, along with the atmospheric radiation data. This will enable the determination of atmospheric heating rates and top-of-atmosphere radiances and fluxes. This paper focuses on the BMA-FLX processor, an algorithm specifically created, developed, and validated to retrieve thermal and solar top-of-atmosphere radiative fluxes from longwave and shortwave radiances, measured along-track by the EarthCARE Broadband Radiometer (BBR) instrument. These measurements are co-registered either at the surface or at the radiatively most significant vertical layer of the atmosphere in cloudy condition (reference level). The Multi-Spectral Imager (MSI) and Atmospheric LiDAR (ATLID) on-board EarthCARE support cloud identification, while meteorological data from the European Centre for Medium-Range Weather Forecasts provide the surface and atmospheric necessary information. In the BMA-FLX processor, flux is estimated independently for each BBR view using different approaches for the longwave and shortwave radiances. A combined flux, derived from co-registered radiances at the reference level, is provided as the best estimate for a given scene. The radiance-to-flux conversion algorithms have been successfully validated through end-to-end verification using L1 and L2 synthetic data for three EarthCARE orbits. The BMA-FLX’s objective is to achieve radiative closure for EarthCARE with solar and thermal fluxes within 10 Wm−2.
- 1 August 2024
- Published by Copernicus GmbH
- Vol. 2024, 1-26
Open AccessReply on RC1
The Earth Cloud, Aerosol and Radiation Explorer (EarthCARE) satellite mission is expected to provide new insights into aerosols, clouds, and radiation. The satellite’s payload include four instruments design to synergistically retrieve vertical profiles of clouds and aerosols, along with the atmospheric radiation data. This will enable the determination of atmospheric heating rates and top-of-atmosphere radiances and fluxes. This paper focuses on the BMA-FLX processor, an algorithm specifically created, developed, and validated to retrieve thermal and solar top-of-atmosphere radiative fluxes from longwave and shortwave radiances, measured along-track by the EarthCARE Broadband Radiometer (BBR) instrument. These measurements are co-registered either at the surface or at the radiatively most significant vertical layer of the atmosphere in cloudy condition (reference level). The Multi-Spectral Imager (MSI) and Atmospheric LiDAR (ATLID) on-board EarthCARE support cloud identification, while meteorological data from the European Centre for Medium-Range Weather Forecasts provide the surface and atmospheric necessary information. In the BMA-FLX processor, flux is estimated independently for each BBR view using different approaches for the longwave and shortwave radiances. A combined flux, derived from co-registered radiances at the reference level, is provided as the best estimate for a given scene. The radiance-to-flux conversion algorithms have been successfully validated through end-to-end verification using L1 and L2 synthetic data for three EarthCARE orbits. The BMA-FLX’s objective is to achieve radiative closure for EarthCARE with solar and thermal fluxes within 10 Wm−2.
- Open Access
- 1 August 2024
- Published by Copernicus GmbH
- Vol. 2024, 1-26
Reply on RC1
The Earth Cloud, Aerosol and Radiation Explorer (EarthCARE) satellite mission is expected to provide new insights into aerosols, clouds, and radiation. The satellite’s payload include four instruments design to synergistically retrieve vertical profiles of clouds and aerosols, along with the atmospheric radiation data. This will enable the determination of atmospheric heating rates and top-of-atmosphere radiances and fluxes. This paper focuses on the BMA-FLX processor, an algorithm specifically created, developed, and validated to retrieve thermal and solar top-of-atmosphere radiative fluxes from longwave and shortwave radiances, measured along-track by the EarthCARE Broadband Radiometer (BBR) instrument. These measurements are co-registered either at the surface or at the radiatively most significant vertical layer of the atmosphere in cloudy condition (reference level). The Multi-Spectral Imager (MSI) and Atmospheric LiDAR (ATLID) on-board EarthCARE support cloud identification, while meteorological data from the European Centre for Medium-Range Weather Forecasts provide the surface and atmospheric necessary information. In the BMA-FLX processor, flux is estimated independently for each BBR view using different approaches for the longwave and shortwave radiances. A combined flux, derived from co-registered radiances at the reference level, is provided as the best estimate for a given scene. The radiance-to-flux conversion algorithms have been successfully validated through end-to-end verification using L1 and L2 synthetic data for three EarthCARE orbits. The BMA-FLX’s objective is to achieve radiative closure for EarthCARE with solar and thermal fluxes within 10 Wm−2.
- 1 August 2024
- Published by Copernicus GmbH
- Vol. 2024, 1-26
Open AccessReply on RC1
The Earth Cloud, Aerosol and Radiation Explorer (EarthCARE) satellite mission is expected to provide new insights into aerosols, clouds, and radiation. The satellite’s payload include four instruments design to synergistically retrieve vertical profiles of clouds and aerosols, along with the atmospheric radiation data. This will enable the determination of atmospheric heating rates and top-of-atmosphere radiances and fluxes. This paper focuses on the BMA-FLX processor, an algorithm specifically created, developed, and validated to retrieve thermal and solar top-of-atmosphere radiative fluxes from longwave and shortwave radiances, measured along-track by the EarthCARE Broadband Radiometer (BBR) instrument. These measurements are co-registered either at the surface or at the radiatively most significant vertical layer of the atmosphere in cloudy condition (reference level). The Multi-Spectral Imager (MSI) and Atmospheric LiDAR (ATLID) on-board EarthCARE support cloud identification, while meteorological data from the European Centre for Medium-Range Weather Forecasts provide the surface and atmospheric necessary information. In the BMA-FLX processor, flux is estimated independently for each BBR view using different approaches for the longwave and shortwave radiances. A combined flux, derived from co-registered radiances at the reference level, is provided as the best estimate for a given scene. The radiance-to-flux conversion algorithms have been successfully validated through end-to-end verification using L1 and L2 synthetic data for three EarthCARE orbits. The BMA-FLX’s objective is to achieve radiative closure for EarthCARE with solar and thermal fluxes within 10 Wm−2.
- Top Cited PapersOpen Access
- 17 July 2024
- Published by Copernicus GmbH in Atmospheric Measurement Techniques
- Vol. 17 (14) , 4245-4256
Unfiltering of the EarthCARE Broadband Radiometer (BBR) observations: the BM-RAD product
The methodology to determine the unfiltered solar and thermal radiances from the measured EarthCARE Broadband Radiometer (BBR) shortwave (SW) and total-wave (TW) filtered radiances is presented. Within the EarthCARE ground processing, the correction for the effect of the BBR spectral responses, the unfiltering, is performed by the so-called BM-RAD processor which produces the level-2 BM-RAD product. The BM-RAD product refers to unfiltered broadband radiances that are derived from the BBR and the Multi-Spectral Imager (MSI) instruments on board the forthcoming EarthCARE satellite. The method is based on theoretical regressions between filtered and unfiltered radiances, as is done for the Clouds and the Earth's Radiant Energy System (CERES) and the Geostationary Earth Radiation Budget (GERB) instruments. The regressions are derived from a large geophysical database of spectral radiance curves simulated using radiative transfer models. Based on the radiative transfer computations, the unfiltering error, i.e., the error introduced by the small spectral variations of the BBR instrument response, is expected to remain well below 0.5 % in the shortwave (SW) and 0.1 % in the longwave (LW), at 1 standard deviation. These excellent performances are permitted by the very simple optics used in the BBR instrument: a telescope with a single paraboloid mirror. End-to-end verification of the unfiltering algorithm has been performed by running the BM-RAD processor on modelled level-1 BBR radiances obtained for three EarthCARE orbits simulated by an integrated forecasting and data assimilation system. The resulting unfiltered radiances are eventually compared to the solar and thermal radiances derived by radiative transfer simulations over the three EarthCARE orbits. In addition, this end-to-end verification has provided further evidence on the high accuracy of the unfiltered radiance process, with accuracies better than 0.5 % for SW and better than 0.1 % for LW.
- 17 July 2024
- Published by Copernicus GmbH in Atmospheric Measurement Techniques
- Vol. 17 (14) , 4245-4256
Top Cited PapersOpen AccessUnfiltering of the EarthCARE Broadband Radiometer (BBR) observations: the BM-RAD product
The methodology to determine the unfiltered solar and thermal radiances from the measured EarthCARE Broadband Radiometer (BBR) shortwave (SW) and total-wave (TW) filtered radiances is presented. Within the EarthCARE ground processing, the correction for the effect of the BBR spectral responses, the unfiltering, is performed by the so-called BM-RAD processor which produces the level-2 BM-RAD product. The BM-RAD product refers to unfiltered broadband radiances that are derived from the BBR and the Multi-Spectral Imager (MSI) instruments on board the forthcoming EarthCARE satellite. The method is based on theoretical regressions between filtered and unfiltered radiances, as is done for the Clouds and the Earth's Radiant Energy System (CERES) and the Geostationary Earth Radiation Budget (GERB) instruments. The regressions are derived from a large geophysical database of spectral radiance curves simulated using radiative transfer models. Based on the radiative transfer computations, the unfiltering error, i.e., the error introduced by the small spectral variations of the BBR instrument response, is expected to remain well below 0.5 % in the shortwave (SW) and 0.1 % in the longwave (LW), at 1 standard deviation. These excellent performances are permitted by the very simple optics used in the BBR instrument: a telescope with a single paraboloid mirror. End-to-end verification of the unfiltering algorithm has been performed by running the BM-RAD processor on modelled level-1 BBR radiances obtained for three EarthCARE orbits simulated by an integrated forecasting and data assimilation system. The resulting unfiltered radiances are eventually compared to the solar and thermal radiances derived by radiative transfer simulations over the three EarthCARE orbits. In addition, this end-to-end verification has provided further evidence on the high accuracy of the unfiltered radiance process, with accuracies better than 0.5 % for SW and better than 0.1 % for LW.
- Open Access
- 25 June 2024
- Published by Copernicus GmbH
- Vol. 2024, 1-26
Comment on egusphere-2024-1539
The Earth Cloud, Aerosol and Radiation Explorer (EarthCARE) satellite mission is expected to provide new insights into aerosols, clouds, and radiation. The satellite’s payload include four instruments design to synergistically retrieve vertical profiles of clouds and aerosols, along with the atmospheric radiation data. This will enable the determination of atmospheric heating rates and top-of-atmosphere radiances and fluxes. This paper focuses on the BMA-FLX processor, an algorithm specifically created, developed, and validated to retrieve thermal and solar top-of-atmosphere radiative fluxes from longwave and shortwave radiances, measured along-track by the EarthCARE Broadband Radiometer (BBR) instrument. These measurements are co-registered either at the surface or at the radiatively most significant vertical layer of the atmosphere in cloudy condition (reference level). The Multi-Spectral Imager (MSI) and Atmospheric LiDAR (ATLID) on-board EarthCARE support cloud identification, while meteorological data from the European Centre for Medium-Range Weather Forecasts provide the surface and atmospheric necessary information. In the BMA-FLX processor, flux is estimated independently for each BBR view using different approaches for the longwave and shortwave radiances. A combined flux, derived from co-registered radiances at the reference level, is provided as the best estimate for a given scene. The radiance-to-flux conversion algorithms have been successfully validated through end-to-end verification using L1 and L2 synthetic data for three EarthCARE orbits. The BMA-FLX’s objective is to achieve radiative closure for EarthCARE with solar and thermal fluxes within 10 Wm−2.
- 25 June 2024
- Published by Copernicus GmbH
- Vol. 2024, 1-26
Open AccessComment on egusphere-2024-1539
The Earth Cloud, Aerosol and Radiation Explorer (EarthCARE) satellite mission is expected to provide new insights into aerosols, clouds, and radiation. The satellite’s payload include four instruments design to synergistically retrieve vertical profiles of clouds and aerosols, along with the atmospheric radiation data. This will enable the determination of atmospheric heating rates and top-of-atmosphere radiances and fluxes. This paper focuses on the BMA-FLX processor, an algorithm specifically created, developed, and validated to retrieve thermal and solar top-of-atmosphere radiative fluxes from longwave and shortwave radiances, measured along-track by the EarthCARE Broadband Radiometer (BBR) instrument. These measurements are co-registered either at the surface or at the radiatively most significant vertical layer of the atmosphere in cloudy condition (reference level). The Multi-Spectral Imager (MSI) and Atmospheric LiDAR (ATLID) on-board EarthCARE support cloud identification, while meteorological data from the European Centre for Medium-Range Weather Forecasts provide the surface and atmospheric necessary information. In the BMA-FLX processor, flux is estimated independently for each BBR view using different approaches for the longwave and shortwave radiances. A combined flux, derived from co-registered radiances at the reference level, is provided as the best estimate for a given scene. The radiance-to-flux conversion algorithms have been successfully validated through end-to-end verification using L1 and L2 synthetic data for three EarthCARE orbits. The BMA-FLX’s objective is to achieve radiative closure for EarthCARE with solar and thermal fluxes within 10 Wm−2.
- Open Access
- 4 June 2024
- Published by Copernicus GmbH in EGUsphere
- Vol. 2024, 1-26
Retrieval of top-of-atmosphere fluxes from combined EarthCARE LiDAR, imager and broadband radiometer observations: the BMA-FLX product
The Earth Cloud, Aerosol and Radiation Explorer (EarthCARE) satellite mission is expected to provide new insights into aerosols, clouds, and radiation. The satellite’s payload include four instruments design to synergistically retrieve vertical profiles of clouds and aerosols, along with the atmospheric radiation data. This will enable the determination of atmospheric heating rates and top-of-atmosphere radiances and fluxes. This paper focuses on the BMA-FLX processor, an algorithm specifically created, developed, and validated to retrieve thermal and solar top-of-atmosphere radiative fluxes from longwave and shortwave radiances, measured along-track by the EarthCARE Broadband Radiometer (BBR) instrument. These measurements are co-registered either at the surface or at the radiatively most significant vertical layer of the atmosphere in cloudy condition (reference level). The Multi-Spectral Imager (MSI) and Atmospheric LiDAR (ATLID) on-board EarthCARE support cloud identification, while meteorological data from the European Centre for Medium-Range Weather Forecasts provide the surface and atmospheric necessary information. In the BMA-FLX processor, flux is estimated independently for each BBR view using different approaches for the longwave and shortwave radiances. A combined flux, derived from co-registered radiances at the reference level, is provided as the best estimate for a given scene. The radiance-to-flux conversion algorithms have been successfully validated through end-to-end verification using L1 and L2 synthetic data for three EarthCARE orbits. The BMA-FLX’s objective is to achieve radiative closure for EarthCARE with solar and thermal fluxes within 10 Wm−2.
- 4 June 2024
- Published by Copernicus GmbH in EGUsphere
- Vol. 2024, 1-26
Open AccessRetrieval of top-of-atmosphere fluxes from combined EarthCARE LiDAR, imager and broadband radiometer observations: the BMA-FLX product
The Earth Cloud, Aerosol and Radiation Explorer (EarthCARE) satellite mission is expected to provide new insights into aerosols, clouds, and radiation. The satellite’s payload include four instruments design to synergistically retrieve vertical profiles of clouds and aerosols, along with the atmospheric radiation data. This will enable the determination of atmospheric heating rates and top-of-atmosphere radiances and fluxes. This paper focuses on the BMA-FLX processor, an algorithm specifically created, developed, and validated to retrieve thermal and solar top-of-atmosphere radiative fluxes from longwave and shortwave radiances, measured along-track by the EarthCARE Broadband Radiometer (BBR) instrument. These measurements are co-registered either at the surface or at the radiatively most significant vertical layer of the atmosphere in cloudy condition (reference level). The Multi-Spectral Imager (MSI) and Atmospheric LiDAR (ATLID) on-board EarthCARE support cloud identification, while meteorological data from the European Centre for Medium-Range Weather Forecasts provide the surface and atmospheric necessary information. In the BMA-FLX processor, flux is estimated independently for each BBR view using different approaches for the longwave and shortwave radiances. A combined flux, derived from co-registered radiances at the reference level, is provided as the best estimate for a given scene. The radiance-to-flux conversion algorithms have been successfully validated through end-to-end verification using L1 and L2 synthetic data for three EarthCARE orbits. The BMA-FLX’s objective is to achieve radiative closure for EarthCARE with solar and thermal fluxes within 10 Wm−2.
- Open Access
- 31 January 2024
- Published by Copernicus GmbH
- p. 1-16
Reply on RC2
The methodology to determine the unfiltered solar and thermal radiances from the measured EarthCARE BBR shortwave (SW) and totalwave (TW) filtered radiances is presented. Within the EarthCARE ground processing, the correction for the effect of the BBR spectral responses, the unfiltering, is performed by the so-called BM-RAD processor which produces the level 2 BM-RAD product. The BM-RAD product refers to unfiltered broadband radiances that are derived from the BBR and the Multi-Spectral Imager (MSI) instruments onboard of the forthcoming EarthCARE satellite. The method is based on theoretical regressions between filtered and unfiltered radiances, as is done for the Clouds and the Earth's Radiant Energy System (CERES) and the Geostationary Earth Radiation Budget (GERB) instruments. The regressions are derived from a large geophysical database of spectral radiance curves simulated using radiative transfer models. Based on the radiative transfer computations, the unfiltering error, i.e., the error introduced by the small spectral variations of the BBR instrument response, is expected to remain well below 0.5 % in the shortwave (SW) and 0.1 % in the longwave (LW), at 1 standard deviation. These excellent performances are permitted by the very simple optics used in the BBR instrument: a telescope with a single paraboloid mirror. End-to-end verification of the unfiltering algorithm has been performed by running the BM-RAD processor on modeled Level 1 BBR radiances obtained for three EarthCARE orbits simulated by an integrated forecasting and data assimilation system. The resulting unfiltered radiances are eventually compared to the solar and thermal radiances derived by radiative transfer simulations over the three EarthCARE orbits. In addition, this end-to-end verification has provided further evidence on the high accuracy of the unfiltered radiance process, with accuracies better than 0.5 % for SW and better than 0.1 % for LW.
- 31 January 2024
- Published by Copernicus GmbH
- p. 1-16
Open AccessReply on RC2
The methodology to determine the unfiltered solar and thermal radiances from the measured EarthCARE BBR shortwave (SW) and totalwave (TW) filtered radiances is presented. Within the EarthCARE ground processing, the correction for the effect of the BBR spectral responses, the unfiltering, is performed by the so-called BM-RAD processor which produces the level 2 BM-RAD product. The BM-RAD product refers to unfiltered broadband radiances that are derived from the BBR and the Multi-Spectral Imager (MSI) instruments onboard of the forthcoming EarthCARE satellite. The method is based on theoretical regressions between filtered and unfiltered radiances, as is done for the Clouds and the Earth's Radiant Energy System (CERES) and the Geostationary Earth Radiation Budget (GERB) instruments. The regressions are derived from a large geophysical database of spectral radiance curves simulated using radiative transfer models. Based on the radiative transfer computations, the unfiltering error, i.e., the error introduced by the small spectral variations of the BBR instrument response, is expected to remain well below 0.5 % in the shortwave (SW) and 0.1 % in the longwave (LW), at 1 standard deviation. These excellent performances are permitted by the very simple optics used in the BBR instrument: a telescope with a single paraboloid mirror. End-to-end verification of the unfiltering algorithm has been performed by running the BM-RAD processor on modeled Level 1 BBR radiances obtained for three EarthCARE orbits simulated by an integrated forecasting and data assimilation system. The resulting unfiltered radiances are eventually compared to the solar and thermal radiances derived by radiative transfer simulations over the three EarthCARE orbits. In addition, this end-to-end verification has provided further evidence on the high accuracy of the unfiltered radiance process, with accuracies better than 0.5 % for SW and better than 0.1 % for LW.
- Open Access
- 24 August 2023
- Published by Copernicus GmbH in EGUsphere
- Vol. 2023, 1-16
Unfiltering of the EarthCARE Broadband Radiometer (BBR) observations: the BM–RAD product
The methodology to determine the unfiltered solar and thermal radiances from the measured EarthCARE BBR shortwave (SW) and totalwave (TW) filtered radiances is presented. Within the EarthCARE ground processing, the correction for the effect of the BBR spectral responses, the unfiltering, is performed by the so-called BM-RAD processor which produces the level 2 BM-RAD product. The BM-RAD product refers to unfiltered broadband radiances that are derived from the BBR and the Multi-Spectral Imager (MSI) instruments onboard of the forthcoming EarthCARE satellite. The method is based on theoretical regressions between filtered and unfiltered radiances, as is done for the Clouds and the Earth's Radiant Energy System (CERES) and the Geostationary Earth Radiation Budget (GERB) instruments. The regressions are derived from a large geophysical database of spectral radiance curves simulated using radiative transfer models. Based on the radiative transfer computations, the unfiltering error, i.e., the error introduced by the small spectral variations of the BBR instrument response, is expected to remain well below 0.5 % in the shortwave (SW) and 0.1 % in the longwave (LW), at 1 standard deviation. These excellent performances are permitted by the very simple optics used in the BBR instrument: a telescope with a single paraboloid mirror. End-to-end verification of the unfiltering algorithm has been performed by running the BM-RAD processor on modeled Level 1 BBR radiances obtained for three EarthCARE orbits simulated by an integrated forecasting and data assimilation system. The resulting unfiltered radiances are eventually compared to the solar and thermal radiances derived by radiative transfer simulations over the three EarthCARE orbits. In addition, this end-to-end verification has provided further evidence on the high accuracy of the unfiltered radiance process, with accuracies better than 0.5 % for SW and better than 0.1 % for LW.
- 24 August 2023
- Published by Copernicus GmbH in EGUsphere
- Vol. 2023, 1-16
Open AccessUnfiltering of the EarthCARE Broadband Radiometer (BBR) observations: the BM–RAD product
The methodology to determine the unfiltered solar and thermal radiances from the measured EarthCARE BBR shortwave (SW) and totalwave (TW) filtered radiances is presented. Within the EarthCARE ground processing, the correction for the effect of the BBR spectral responses, the unfiltering, is performed by the so-called BM-RAD processor which produces the level 2 BM-RAD product. The BM-RAD product refers to unfiltered broadband radiances that are derived from the BBR and the Multi-Spectral Imager (MSI) instruments onboard of the forthcoming EarthCARE satellite. The method is based on theoretical regressions between filtered and unfiltered radiances, as is done for the Clouds and the Earth's Radiant Energy System (CERES) and the Geostationary Earth Radiation Budget (GERB) instruments. The regressions are derived from a large geophysical database of spectral radiance curves simulated using radiative transfer models. Based on the radiative transfer computations, the unfiltering error, i.e., the error introduced by the small spectral variations of the BBR instrument response, is expected to remain well below 0.5 % in the shortwave (SW) and 0.1 % in the longwave (LW), at 1 standard deviation. These excellent performances are permitted by the very simple optics used in the BBR instrument: a telescope with a single paraboloid mirror. End-to-end verification of the unfiltering algorithm has been performed by running the BM-RAD processor on modeled Level 1 BBR radiances obtained for three EarthCARE orbits simulated by an integrated forecasting and data assimilation system. The resulting unfiltered radiances are eventually compared to the solar and thermal radiances derived by radiative transfer simulations over the three EarthCARE orbits. In addition, this end-to-end verification has provided further evidence on the high accuracy of the unfiltered radiance process, with accuracies better than 0.5 % for SW and better than 0.1 % for LW.