Carmen M. Breitling-Utzmann

This study examines the acrylamide levels in a range of roasted coffee samples from Bahrain, with a particular focus on traditionally very light roasted coffees. Acrylamide, classified as a Group 2A carcinogen by the International Agency for Research on Cancer (IARC), is formed during the roasting process as a byproduct of the reaction between amino acids and reducing sugars present in coffee beans. The acrylamide levels were quantified using the standard method EN 16618:2015, which employs liquid chromatography in combination with tandem mass spectrometry (LC-MS/MS). The results demonstrated that the acrylamide levels in very light-roasted coffee samples (646 µg/kg, n = 4), which exhibited characteristics similar to green coffee, were significantly above the European Union (EU) benchmark level for roasted coffee of 400 µg/kg. In contrast, medium-roasted coffee samples (154 µg/kg, n = 4) and dark-roasted coffee samples (62 µg/kg, n = 2) did not exceed the benchmark level. These findings indicate a potential health risk associated with the consumption of very light-roasted coffee, emphasizing the need for awareness and possible mitigation strategies to reduce acrylamide exposure in traditional Arabic coffee practices.

Coffee silver skin is produced in large amounts as a by-product during the coffee roasting process. In this study, coffee silver skin of the species Coffea arabica L. and Coffea canephora Pierre ex A. Froehner as well as silver skin pellets produced in the coffee industry were characterized with respect to both nutritional value and potential heat-induced contaminants. Enzymatic-gravimetric/chromatographic determination of the dietary fiber content showed values ranging from 59 to 67 g/100 g with a comparably high portion of soluble fiber, whereas low molecular weight soluble fiber was not detected. Compositional and methylation analysis indicated the presence of cellulose and xylans in the insoluble dietary fiber fraction, whereas pectic polysaccharides dominate the soluble dietary fiber fraction. The protein content as determined by the Kjeldahl method was in the range of 18 to 22 g/100 g, and all essential amino acids were present in coffee silver skin; whereas fat contents were low, high ash contents were determined. Elemental analysis by inductively coupled plasma mass spectrometry (ICP-MS) showed the presence of macroelements in large amounts, whereas toxic mineral elements were only detected in trace amounts or being absent. Acrylamide was quantified with levels of 24–161 µg/kg. Although 5-hydroxymethylfurfural was detected, its concentration was below the limit of determination. Furfuryl alcohol was not detected.

Acrylamide is probably carcinogenic to humans (International Agency for Research on Cancer, group 2A) with major occurrence in heated, mainly carbohydrate-rich foods. For roasted coffee, a European Union benchmark level of 400 µg/kg acrylamide is of importance. Regularly, the acrylamide contents are controlled using liquid chromatography combined with tandem mass spectrometry (LC–MS/MS). This reference method is reliable and precise but laborious because of the necessary sample clean-up procedure and instrument requirements. This research investigates the possibility of predicting the acrylamide content from proton nuclear magnetic resonance (NMR) spectra that are already recorded for other purposes of coffee control. In the NMR spectrum acrylamide is not directly quantifiable, so that the aim was to establish a correlation between the reference value and the corresponding NMR spectrum by means of a partial least squares (PLS) regression. Therefore, 40 commercially available coffee samples with already available LC–MS/MS data and NMR spectra were used as calibration data. To test the accuracy and robustness of the model and its limitations, 50 coffee samples with extreme roasting degrees and blends were additionally prepared as the test set. The PLS model shows an applicability for the varieties Coffea arabica and C. canephora, which were medium to very dark roasted using drum or infrared roasters. The root mean square error of prediction (RMSEP) is 79 µg/kg acrylamide (n = 32). The current PLS model is judged as suitable to predict the acrylamide values of commercially available coffee samples.

Acrylamide is probably carcinogenic to humans (International Agency for Research on Cancer, group 2A) with major occurrence in heated, mainly carbohydrate-rich foods. For roasted coffee, a European Union benchmark level of 400 µg/kg acrylamide is of importance. Regularly, the acrylamide contents are controlled using liquid chromatography combined with tandem mass spectrometry (LC-MS/MS). This reference method is reliable and precise but laborious because of the necessary sample clean-up procedure and instrument requirements. This research investigates the possibility of predicting the acrylamide content from proton nuclear magnetic resonance (NMR) spectra that are already recorded for other purposes of coffee control. In the NMR spectrum acrylamide is not directly quantifiable, so that the aim was to establish a correlation between the reference value and the corresponding NMR spectrum by means of a partial least squares (PLS) regression. Therefore, 40 commercially available coffee samples with already available LC-MS/MS data and NMR spectra were used as calibration data. To test the accuracy and robustness of the model and its limitations, 50 coffee samples with extreme roasting degrees and blends were additionally prepared as test set. The PLS model shows an applicability for the varieties C. arabica and C. canephora, which were medium to very dark roasted using drum or infrared roasters. The root mean square error of prediction (RMSEP) is 79 µg/kg acrylamide (n=32). The PLS model is judged as suitable to predict the acrylamide values of commercially available coffee samples. On the other hand, very light roasts containing more than 1000 µg/kg acrylamide are currently not suitable for PLS prediction.

The four heat-induced coffee contaminants—acrylamide, furfuryl alcohol (FA), furan and 5-hydroxymethylfurfural (HMF)—were analyzed in a collective of commercial samples as well as in Coffea arabica seeds roasted under controlled conditions from very light Scandinavian style to very dark Neapolitan style profiles. Regarding acrylamide, average contents in commercial samples were lower than in a previous study in 2002 (195 compared to 303 µg/kg). The roasting experiment confirmed the inverse relationship between roasting degree and acrylamide content, i.e., the lighter the coffee, the higher the acrylamide content. However, FA, furan and HMF were inversely related to acrylamide and found in higher contents in darker roasts. Therefore, mitigation measures must consider all contaminants and not be focused isolatedly on acrylamide, specifically since FA and HMF are contained in much higher contents with lower margins of exposure compared to acrylamide.

The influence of different dough ingredients such as fat, salt, sourdough, emulsifiers, and sugar on the formation of 3-chloropropane-1,2-diol (3-MCPD) during toast preparation under domestic conditions was investigated. In comparison with a fat-free recipe, addition of 1% peanut fat considerably increased 3-MCPD formation, but varying the fat (2–5%) or salt (1.6–2.4%) contents within technological acceptable limits did not show any significant differences. A baking agent, which is usually commercially applied by many toast bakers or industrial toast manufacturers, increased 3-MCPD formation in toasted bread slices. Considerable evidence was found that the baking agent's main component sucrose had the major part in increasing 3-MCPD levels. Emulsifiers containing monoacylglycerols moderately increased 3-MCPD levels, but the addition of lecithin did not have any significant influence. 3-MCPD levels showed a good correlation with the lightness (L* value) of the bread slices; their 3-MCPD content increased exponentially towards dark coloured toasts. The relation between 3-MCPD and 2-MCPD was an average of 3:1 in all samples. Dichloropropanols such as, for example, 1,3-dichloropropanol could not be detected.

The influences of both traditional dough ingredients like fat and salt and a commercially used baking agent on the formation of 3-chloropropane-1,2-diol (3-MCPD) during toasting of bread were investigated. Whereas varying the fat or salt contents within technologically practicable limits showed negligible effects on 3-MCPD formation, the baking agent turned out to have a crucial impact on generating 3-MCPD in toasted bread slices. We found considerable evidence that the baking agent’s main component saccharose was the major cause for its boosting the 3-MCPD formation. Emulsifiers like mono- and diacylglycerols or lecithin did not have any significant influence. 3-MCPD formation showed good correlation with the degree of browning of the bread slices; their 3-MCPD content increased exponentially towards dark brown coloured toasts. The relative proportions between 3-MCPD and 2-MCPD were an average of 3:1 in all samples. Dichloropropanols like e.g. 1,3-dichloropropan-2-ol could not be detected.

While the Maillard reaction of free amino acids and proteins is a well-established process, no defined structures from the nonenzymatic browning of aminophospholipids in foodstuffs have been described so far. Phosphatidylethanolamine (PE)-linked glucosylamines (Schiff-PE), Amadori products (Amadori-PE), 5-hydroxymethylpyrrole-2-carbaldehydes (Pyrrole-PE), and carboxymethyl (CM-PE) as well as carboxyethyl (CE-PE) derivatives were detected and quantified by liquid chromatography− electrospray mass spectrometry (LC−(ESI)MS). Model incubations of soy-PE and d-glucose were employed to firmly establish the LC−(ESI)MS procedure. Analyses of spray-dried egg yolk powders and lecithin products derived therefrom show one-fourth of the native d-glucose content of egg yolk to be transformed to Amadori-PE, corresponding to a PE derivatization quota of 11−15.5 mol %. Schiff-PE and Pyrrole-PE were present only in low amounts, no CM-PE and CE-PE could be identified in any of the investigated samples. The high glycation rate of egg yolk PE will influence the emulsifying properties and perhaps even the oxidation resistance of the respective products. Keywords: Maillard reaction; phosphatidylethanolamine; lecithin; egg yolk; Amadori compound; advanced glycation end products (AGEs)