ALAijun Li

Aijun Li

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Aijun Li has a total of 3 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Research on the Sintering Mechanism of Porous Copper Fiber Materials by Sintering Diagram Method

    by Aijun Li, Jun Ma, Jianzhong Wang

    Sintering diagram for copper fibers is established based on a two joint-fiber geometric model and intrinsic material constants, with comprehensive consideration of four neck-growth mechanisms: volume diffusion, grain-boundary diffusion, surface diffusion and Nabarro-Herring microcreep. The sintering diagram reveals that grain-boundary diffusion dominates neck growth at relatively low temperatures, surface diffusion prevails at high temperatures for short holding time, and Nabarro-Herring microcreep acts as the primary mechanism at high temperatures for long holding time, respectively. In addition, synchrotron radiation X-ray computed tomography (SR-CT) characterization is adopted to validate the established sintering diagram via the measured neck size of sintered fiber joints. The experimental results show that most measured neck-size data points lie close to the theoretical curve predicted by the Nabarro-Herring microcreep mechanism when sintered at 1030 oC for 30 min, 60 min and 180 min. This result confirms that Nabarro-Herring microcreep is the predominant neck-growth mechanism at high temperatures for long holding time, which is consistent with the theoretical result derived from the sintering diagram. Meanwhile, the results also prove the existence of Nabarro-Herring microcreep during the high-temperature sintering of copper fibers without externally applied pressure.

  • Open Access

    Study on Sintering Mechanism of Stainless Steel Fiber Felts by X-ray Computed Tomography

    by Jun Ma, Aijun Li, Huiping Tang

    The microstructure evolution of Fe-17 wt. % Cr-12 wt. % Ni-2 wt. % Mo stainless steel fiber felts during the fast sintering process was investigated by the synchrotron radiation X-ray computed tomography technique. The equation of dynamics of stable inter-fiber neck growth was established for the first time based on the geometry model of sintering joints of two fibers and Kucsynski’s two-sphere model. The specific evolutions of different kinds of sintering joints were observed in the three-dimensional images. The sintering mechanisms during sintering were proposed as plastic flow and grain boundary diffusion, the former leading to a quick growth of sintering joints.