AYAi-Lan Yan

Ai-Lan Yan

*This is an algorithmically generated author record based on publicly available information.

Ai-Lan Yan has a total of 9 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Effect of Co-Dewatering for Aerobic Granular Sludge and Alum Sludge

    by Yongfei Chen, Kangmei Tu, Dongsheng Qian, Ningyu Li, Ailan Yan

    Sludge dewatering plays a crucial and indispensable role in the sludge treatment and disposal process, directly affecting the subsequent disposal costs and environmental risks. Aerobic granular sludge (AGS) and alum sludge (AS) from water treatment plants are two common types of sludge with distinct dewatering properties. In this experiment, we thoroughly investigated the effects of co-dewatering by mixing AGS and AS in different proportions. The results showed that the addition of the AS effectively altered the composition and characteristics of the AGS, which significantly improved its settlement performance. When the AGS and AS were mixed in a specific proportion, the water content of the dewatered AGS was reduced from 81.2% to 70.9%, which fully demonstrated a significant improvement in the AGS dewatering performance achieved through the mixed treatment. It is recommended to be widely promoted and applied in practical engineering.


  • Open Access

    The Synthesis of NiCo2O4–MnO2 Core–Shell Nanowires by Electrodeposition and Its Supercapacitive Properties

    by Ai-Lan Yan, Wei-Dong Wang, Wen-Qiang Chen, Xin-Chang Wang, Fu Liu, Ji-Peng Cheng

    Hierarchical composite films grown on current collectors are popularly reported to be directly used as electrodes for supercapacitors. Highly dense and conductive NiCo2O4 nanowires are ideal backbones to support guest materials. In this work, low crystalline MnO2 nanoflakes are electrodeposited onto the surface of NiCo2O4 nanowire films pre-coated on nickel foam. Each building block in the composite films is a NiCo2O4–MnO2 core–shell nanowire on conductive nickel foam. Due to the co-presence of MnO2 and NiCo2O4, the MnO2@NiCo2O4@Ni electrode exhibits higher specific capacitance and larger working voltage than the NiCo2O4@Ni electrode. It can have a high specific capacitance of 1186 F·g−1 at 1 A·g−1. When the core–shell NiCo2O4–MnO2 composite and activated carbon are assembled as a hybrid capacitor, it has the highest energy density of 29.6 Wh·kg−1 at a power density of 425 W·kg−1 with an operating voltage of 1.7 V. This work shows readers an easy method to synthesize composite films for energy storage.


  • Open Access

    Research Progress of NiMn Layered Double Hydroxides for Supercapacitors: A Review

    by Ai-Lan Yan, Xin-Chang Wang, Ji-Peng Cheng

    The research on supercapacitors has been attractive due to their large power density, fast charge/discharge speed and long lifespan. The electrode materials for supercapacitors are thus intensively investigated to improve the electrochemical performances. Various transition metal layered double hydroxides (LDHs) with a hydrotalcite-like structure have been developed to be promising electrode materials. Earth-abundant metal hydroxides are very suitable electrode materials due to the low cost and high specific capacity. This is a review paper on NiMn LDHs for supercapacitor application. We focus particularly on the recent published papers using NiMn LDHs as electrode materials for supercapacitors. The preparation methods for NiMn LDHs are introduced first. Then, the structural design and chemical modification of NiMn LDH materials, as well as the composites and films derived from NiMn LDHs are discussed. These approaches are proven to be effective to enhance the performance of supercapacitor. Finally, the reports related to NiMn LDH-based asymmetric supercapacitors are summarized. A brief discussion of the future development of NiMn LDHs is also provided.