Xiuwei Li
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xiuwei Li has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Feng Cheng
College of Energy and Power Engineering, Nanjing University of Science and Technology, Nanjing 210094, China
5 shared publications Feng Cheng
Nanjing Univ Sci & Technol, Sch Energy & Power Engn, Nanjing 210094, Peoples R China
2 shared publicationsYan Wang
Nanjing Univ Sci & Technol, Sch Energy & Power Engn, Nanjing 210094, Peoples R China
2 shared publicationsBoqing Ding
School of Energy and Power Engineering, Nanjing University of Science and Technology, Jiangsu210096, China
1 shared publication- Boqing Ding
College of Energy and Power Engineering, Nanjing University of Science and Technology, Nanjing 210094, China
1 shared publication Ling Yuan
Chinese Sanhua New Energy Vehicle Parts Co Ltd, Hangzhou, Peoples R China
1 shared publication
Latest Publications
- 19 December 2024
- Published by Elsevier in Solar Energy
- Vol. 286
Research on an absorption air-conditioning system incorporating capture and resources utilization of CO2
- 19 December 2024
- Published by Elsevier in Solar Energy
- Vol. 286
Research on an absorption air-conditioning system incorporating capture and resources utilization of CO2
- 6 February 2024
- Published by Elsevier in Applied Thermal Engineering
- Vol. 244
Mass transfer research on the regeneration process of an air-conditioning battery system
- 6 February 2024
- Published by Elsevier in Applied Thermal Engineering
- Vol. 244
Mass transfer research on the regeneration process of an air-conditioning battery system
- Open Access
- 26 January 2024
- Published by IOS Press
- p. 577-583
A Battery Air-Conditioning System Made from Daily Life Biomass Waste
A new green airconditioning system based on the traditional absorption airconditioning system is proposed: the system adopts biomass waste and forms a medium cycle with capacitive deionization (CDI) technology. The key to the new system is the electrodes of CDI. In our work, corn cobs, corn stalks, and waste cigarette butts have been used to prepare micro/mesoporous carbon material for electrode fabrication. The resultant material has been characterized by BET. The electrochemical performance has been tested with electrochemical workstation. The COP has been analyzed for the new airconditioning system with different electrode materials. The results find the suitable conditions for preparing the electrode material with excellent pore structure and higher specific surface area. It has been demonstrated that the corn cobs activated at 800 ℃ (CBC-800) possess the highest specific surface area of 1201.9 m2 g-1 and the highest electrochemical capacitance of 141.1F g-1 at a scan rate of 5 mV s-1. The results show that the system with LiBr solution has the highest COP, it can approach 6 with a 40 % concentration when CBC-800 is used as carbon electrodes. These results could make the absorption airconditioning system based on the capacitive deionization method more promising for future application.
- 26 January 2024
- Published by IOS Press
- p. 577-583
Open AccessA Battery Air-Conditioning System Made from Daily Life Biomass Waste
A new green airconditioning system based on the traditional absorption airconditioning system is proposed: the system adopts biomass waste and forms a medium cycle with capacitive deionization (CDI) technology. The key to the new system is the electrodes of CDI. In our work, corn cobs, corn stalks, and waste cigarette butts have been used to prepare micro/mesoporous carbon material for electrode fabrication. The resultant material has been characterized by BET. The electrochemical performance has been tested with electrochemical workstation. The COP has been analyzed for the new airconditioning system with different electrode materials. The results find the suitable conditions for preparing the electrode material with excellent pore structure and higher specific surface area. It has been demonstrated that the corn cobs activated at 800 ℃ (CBC-800) possess the highest specific surface area of 1201.9 m2 g-1 and the highest electrochemical capacitance of 141.1F g-1 at a scan rate of 5 mV s-1. The results show that the system with LiBr solution has the highest COP, it can approach 6 with a 40 % concentration when CBC-800 is used as carbon electrodes. These results could make the absorption airconditioning system based on the capacitive deionization method more promising for future application.
- Open Access
Research on Local Heating Regeneration Method for Air-Conditioning Systems
Absorption air-conditioning systems have a great advantage in terms of energy conservation and environmental protection. However, the large amount of energy waste in the thermal regeneration process leads to lower efficiency and impedes its development. To reduce energy loss and improve performance, a local heating regeneration method is proposed in this paper. The main principle is reducing the volume of the liquid participating regeneration. Including the solar steam mode, two modes are introduced and configured. Theoretical and experimental research has been made on the new methods. Models have been developed for comparison analysis. Experiments have been conducted on water and absorbent solution with different modes. Performance has been evaluated based on the experimental data. The results expose the influence of different parameters, like liquid volume and solution concentration, on the regeneration process. The local heating method improved the regeneration efficiency by 40% in the no solar steam mode and the performance tripled in the solar steam mode. The COP (the ratio of cooling load to energy consumption) of the absorption system with the solar steam mode is more than two times of that with the traditional regeneration mode. It shows the local heating regeneration method has good potential in future application.
Open AccessResearch on Local Heating Regeneration Method for Air-Conditioning Systems
Absorption air-conditioning systems have a great advantage in terms of energy conservation and environmental protection. However, the large amount of energy waste in the thermal regeneration process leads to lower efficiency and impedes its development. To reduce energy loss and improve performance, a local heating regeneration method is proposed in this paper. The main principle is reducing the volume of the liquid participating regeneration. Including the solar steam mode, two modes are introduced and configured. Theoretical and experimental research has been made on the new methods. Models have been developed for comparison analysis. Experiments have been conducted on water and absorbent solution with different modes. Performance has been evaluated based on the experimental data. The results expose the influence of different parameters, like liquid volume and solution concentration, on the regeneration process. The local heating method improved the regeneration efficiency by 40% in the no solar steam mode and the performance tripled in the solar steam mode. The COP (the ratio of cooling load to energy consumption) of the absorption system with the solar steam mode is more than two times of that with the traditional regeneration mode. It shows the local heating regeneration method has good potential in future application.
- Open Access
Research on Double-Stage and Multi-Stage Capacitive Deionization Absorption Air-Conditioning System
An absorption air-conditioning system is a good choice for green buildings. It has the superiority in the utilization of renewable energy and the refrigerant is environment-friendly. However, the performance of the traditional absorption system has been restricted by the energy waste in the thermal regeneration process. Capacitive deionization (CDI) regeneration is proposed as a potential method to improve system efficiency. In the new method-based air-conditioning system, strong absorbent solutions and pure water are acquired with the joint work of two CDI units. Nevertheless, the practical CDI device is composed of a lot of CDI units, which is quite different from the theoretical model. To reveal the performance of multiple CDI units, the model of the double/multi-stage CDI system has been developed. Analysis has been made to expose the influence of some key parameters. The results show the double-stage system has better performance than the single-stage system under certain conditions. The coefficient of performance (COP) could exceed 4.5, which is higher than the traditional thermal energy-driven system, or even as competitive as the vapor compression system. More stages with proper voltage distribution better the performance. It also provides the optimization method for the multi-stage CDI system.
Open AccessResearch on Double-Stage and Multi-Stage Capacitive Deionization Absorption Air-Conditioning System
An absorption air-conditioning system is a good choice for green buildings. It has the superiority in the utilization of renewable energy and the refrigerant is environment-friendly. However, the performance of the traditional absorption system has been restricted by the energy waste in the thermal regeneration process. Capacitive deionization (CDI) regeneration is proposed as a potential method to improve system efficiency. In the new method-based air-conditioning system, strong absorbent solutions and pure water are acquired with the joint work of two CDI units. Nevertheless, the practical CDI device is composed of a lot of CDI units, which is quite different from the theoretical model. To reveal the performance of multiple CDI units, the model of the double/multi-stage CDI system has been developed. Analysis has been made to expose the influence of some key parameters. The results show the double-stage system has better performance than the single-stage system under certain conditions. The coefficient of performance (COP) could exceed 4.5, which is higher than the traditional thermal energy-driven system, or even as competitive as the vapor compression system. More stages with proper voltage distribution better the performance. It also provides the optimization method for the multi-stage CDI system.
- Open Access
- 1 January 2021
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 633 (1) , 012010
Experimental study on regeneration performance of the heat localization method for absorption air-conditioning system
Due to serious energy shortage, it is urgent to reduce energy consumption from burning of fossil fuels. Driven by low-grade heat, absorption system is a promising energy conservative air-conditioning system for buildings. However, the main obstacle is the poor performance as a result of the energy waste in conventional thermal regeneration process. With the aim of performance improvement, a heat localization method is proposed for the regeneration process of absorption system. It can improve energy utilization efficiency through thermal energy localization on the evaporation surface. Preliminary experiments have been conducted to test the regeneration performance with this new method. Some parameters have been investigated with the experimental data. Moreover, by comparison between the heat localization method and traditional heating method, it indicates the energy utilization efficiency with the heat localization method are 1.8 to 2.8 times higher than that with the traditional heating method. The performance of the system has been greatly improved. The energy utilization efficiency of the regeneration process can reach 36.9% under certain working conditions. With the performance improvement, the popularization of absorption system will be promoted.
- 1 January 2021
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 633 (1) , 012010
Open AccessExperimental study on regeneration performance of the heat localization method for absorption air-conditioning system
Due to serious energy shortage, it is urgent to reduce energy consumption from burning of fossil fuels. Driven by low-grade heat, absorption system is a promising energy conservative air-conditioning system for buildings. However, the main obstacle is the poor performance as a result of the energy waste in conventional thermal regeneration process. With the aim of performance improvement, a heat localization method is proposed for the regeneration process of absorption system. It can improve energy utilization efficiency through thermal energy localization on the evaporation surface. Preliminary experiments have been conducted to test the regeneration performance with this new method. Some parameters have been investigated with the experimental data. Moreover, by comparison between the heat localization method and traditional heating method, it indicates the energy utilization efficiency with the heat localization method are 1.8 to 2.8 times higher than that with the traditional heating method. The performance of the system has been greatly improved. The energy utilization efficiency of the regeneration process can reach 36.9% under certain working conditions. With the performance improvement, the popularization of absorption system will be promoted.
- Open Access
- 21 May 2020
- Published by MDPI AG in Applied Sciences
- Vol. 10 (10) , 3567
Effects of In Situ Co or Ni Doping on the Photoelectrochemical Performance of Hematite Nanorod Arrays
Co-doped and Ni-doped hematite (α-Fe2O3) nanorod arrays were prepared on fluorine-doped tin oxide (FTO) conductive glass via aqueous chemical growth, in which the doping and the formation of nanorods occurred simultaneously (i.e., in situ doping). These samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), ultraviolet (UV)–visible spectrophotometry, linear sweep voltammetry and Mott–Schottky (M–S) measurement. Results showed that the introduction of 5% Co or Ni into α-Fe2O3 (the molar ratio of dopant to Fe is 1:20) did not change its crystal phase, morphology, energy gap and flat band potential. Both the undoped and the doped α-Fe2O3 showed a direct band gap of 2.24 eV, an indirect band gap of 1.85 eV, and a flat band potential of −0.22 V vs. saturated calomel electrode (SCE). At an applied potential of 0.2 V vs. SCE, the Co-doped and the Ni-doped α-Fe2O3 exhibited a photocurrent of 1.28 mA/cm2 and 0.79 mA/cm2, respectively, which were 2.1 times and 1.3 times that of the undoped α-Fe2O3. After the Co or Ni doping, the charge carrier concentration increased from 1.65 × 1025 m−3 to 3.74 × 1025 m−3 and 2.50 × 1025 m−3, respectively. Therefore, the increase in the photocurrent of the doped α-Fe2O3 was likely attributed to their enhanced conductivity.
- 21 May 2020
- Published by MDPI AG in Applied Sciences
- Vol. 10 (10) , 3567
Open AccessEffects of In Situ Co or Ni Doping on the Photoelectrochemical Performance of Hematite Nanorod Arrays
Co-doped and Ni-doped hematite (α-Fe2O3) nanorod arrays were prepared on fluorine-doped tin oxide (FTO) conductive glass via aqueous chemical growth, in which the doping and the formation of nanorods occurred simultaneously (i.e., in situ doping). These samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), ultraviolet (UV)–visible spectrophotometry, linear sweep voltammetry and Mott–Schottky (M–S) measurement. Results showed that the introduction of 5% Co or Ni into α-Fe2O3 (the molar ratio of dopant to Fe is 1:20) did not change its crystal phase, morphology, energy gap and flat band potential. Both the undoped and the doped α-Fe2O3 showed a direct band gap of 2.24 eV, an indirect band gap of 1.85 eV, and a flat band potential of −0.22 V vs. saturated calomel electrode (SCE). At an applied potential of 0.2 V vs. SCE, the Co-doped and the Ni-doped α-Fe2O3 exhibited a photocurrent of 1.28 mA/cm2 and 0.79 mA/cm2, respectively, which were 2.1 times and 1.3 times that of the undoped α-Fe2O3. After the Co or Ni doping, the charge carrier concentration increased from 1.65 × 1025 m−3 to 3.74 × 1025 m−3 and 2.50 × 1025 m−3, respectively. Therefore, the increase in the photocurrent of the doped α-Fe2O3 was likely attributed to their enhanced conductivity.
- Top Cited PapersOpen Access
Preparation and Application of Biochar-Based Catalysts for Biofuel Production
Firstly, this paper reviews two main methods for biochar synthesis, namely conventional pyrolysis and hydrothermal carbonization (HTC). The related processes are described, and the influences of biomass nature and reaction conditions, especially temperature, are discussed. Compared to pyrolysis, HTC has advantages for processing high-moisture biomass and producing spherical biochar particles. Secondly, typical features of biochar in comparison with other carbonaceous materials are summarized. They refer to the presence of inorganics, surface functional groups, and local crystalline structures made up of highly conjugated aromatic sheets. Thirdly, various strategies for biochar modification are illustrated. They include activation, surface functionalization, in situ heteroatom doping, and the formation of composites with other materials. An appropriate modification is necessary for biochar used as a catalyst. Fourthly, the applications of biochar-based catalysts in three important processes of biofuel production are reviewed. Sulfonated biochar shows good catalytic performance for biomass hydrolysis and biodiesel production. Biodiesel production can also be catalyzed by biochar-derived or -supported solid-alkali catalysts. Biochar alone and biochar-supported metals are potential catalysts for tar reduction during or after biomass gasification. Lastly, the merits of biochar-based catalysts are summarized. Biochar-based catalysts have great developmental prospects. Future work needs to focus on the study of mechanism and process design.
Top Cited PapersOpen AccessPreparation and Application of Biochar-Based Catalysts for Biofuel Production
Firstly, this paper reviews two main methods for biochar synthesis, namely conventional pyrolysis and hydrothermal carbonization (HTC). The related processes are described, and the influences of biomass nature and reaction conditions, especially temperature, are discussed. Compared to pyrolysis, HTC has advantages for processing high-moisture biomass and producing spherical biochar particles. Secondly, typical features of biochar in comparison with other carbonaceous materials are summarized. They refer to the presence of inorganics, surface functional groups, and local crystalline structures made up of highly conjugated aromatic sheets. Thirdly, various strategies for biochar modification are illustrated. They include activation, surface functionalization, in situ heteroatom doping, and the formation of composites with other materials. An appropriate modification is necessary for biochar used as a catalyst. Fourthly, the applications of biochar-based catalysts in three important processes of biofuel production are reviewed. Sulfonated biochar shows good catalytic performance for biomass hydrolysis and biodiesel production. Biodiesel production can also be catalyzed by biochar-derived or -supported solid-alkali catalysts. Biochar alone and biochar-supported metals are potential catalysts for tar reduction during or after biomass gasification. Lastly, the merits of biochar-based catalysts are summarized. Biochar-based catalysts have great developmental prospects. Future work needs to focus on the study of mechanism and process design.
- Open Access
- 1 November 2017
- Published by Elsevier in Procedia Engineering
- Vol. 205, 2357-2364
A novel double-stage membrane regeneration method for absorption air-conditioning system
- 1 November 2017
- Published by Elsevier in Procedia Engineering
- Vol. 205, 2357-2364
Open AccessA novel double-stage membrane regeneration method for absorption air-conditioning system