José Luis Priego
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
José Luis Priego has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Patricia Delgado-Martínez
Centro de Asistencia a la Investigación Difracción de Rayos X, Facultad de Ciencias Químicas, Universidad Complutense de Madrid, E-28040 Madrid, Spain
6 shared publications - Reyes Jiménez-Aparicio
Departamento de Química Inorgánica Facultad de Ciencias Químicas Universidad Complutense de Madrid Ciudad Universitaria 28040 Madrid Spain
6 shared publications - Rodrigo González-Prieto
Universidad Complutense de Madrid
6 shared publications - María Rosario Torres
Centro de Asistencia a la Investigación Difracción de Rayos X, Facultad de Ciencias Químicas, Universidad Complutense de Madrid, E-28040 Madrid, Spain
4 shared publications - Miguel Cortijo
Grupo MatMoPol, Departamento de Química Inorgánica, Facultad de Ciencias Químicas, Universidad Complutense de Madrid, Ciudad Universitaria
2 shared publications - Alejandra Elvira-Bravo
Departamento de Química Inorgánica, Facultad de Ciencias Químicas, Universidad Complutense de Madrid, Ciudad Universitaria, E-28040 Madrid, Spain
1 shared publication
Latest Publications
- Open Access
- 1 December 2023
- Published by American Chemical Society (ACS) in ChemRxiv
Anionic Polymers Formed by Dinuclear Rhodium Units and Dicyanide Silver/Gold Moieties
The synthesis, characterization and structural determination of four complexes with formula (PPh4)n[Rh2(µ–O2CPh)4Au(CN)2]n (1) and Kn[Rh2(µ–O2CR)4M(CN)2]n (M = Au, R = OEt (2), OMe (3); M = Ag, R = OMe (4)) are described. In all cases, the [CN-M-CN]– (M = Au, Ag) group is bridging the axial positions of the dirhodium units giving one-dimensional chains. The packing of the chains in the solid state depends on the nature of the carboxylate group of the dimetallic unit, the counterion present in the complex and the metal itself. The most striking change is observed in the Kn[Rh2(μ-O2CCH2OMe)4Au(CN)2]n complex (3) where the chains are positioned perpendicular to each other with an Au···Au interchain distance of 2.963 Å. The emission studies of this complex upon excitation at 350 nm show a clear broad emission band centered at 430 nm, while no luminescence is observed for the other compounds. The appearance of emission properties only in the case of complex 3 can be explained by its short aurophilic inter-actions.
- 1 December 2023
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessAnionic Polymers Formed by Dinuclear Rhodium Units and Dicyanide Silver/Gold Moieties
The synthesis, characterization and structural determination of four complexes with formula (PPh4)n[Rh2(µ–O2CPh)4Au(CN)2]n (1) and Kn[Rh2(µ–O2CR)4M(CN)2]n (M = Au, R = OEt (2), OMe (3); M = Ag, R = OMe (4)) are described. In all cases, the [CN-M-CN]– (M = Au, Ag) group is bridging the axial positions of the dirhodium units giving one-dimensional chains. The packing of the chains in the solid state depends on the nature of the carboxylate group of the dimetallic unit, the counterion present in the complex and the metal itself. The most striking change is observed in the Kn[Rh2(μ-O2CCH2OMe)4Au(CN)2]n complex (3) where the chains are positioned perpendicular to each other with an Au···Au interchain distance of 2.963 Å. The emission studies of this complex upon excitation at 350 nm show a clear broad emission band centered at 430 nm, while no luminescence is observed for the other compounds. The appearance of emission properties only in the case of complex 3 can be explained by its short aurophilic inter-actions.
- Open Access
Synthesis and Structural Characterization of a Series of One-Dimensional Heteronuclear Dirhodium-Silver Coordination Polymers
Herein, we describe the preparation of heteronuclear dirhodium-silver complexes by reaction between molecular Rh(II)-Rh(II) compounds [Rh2(μ-O2CR)4L2] (R = Me, Ph (1), CH2OEt (2); L = solvent molecules) with paddlewheel structure and PPh4[Ag(CN)2]. One-dimensional coordination polymers of (PPh4)n[Rh2(μ-O2CR)4Ag(CN)2]n (R = Me (3), Ph (4), CH2OEt (5)) formula have been obtained by replacement of the two labile molecules in the axial positions of the paddlewheel structures by a [Ag(CN)2]− bridging unit. The crystal structures of 3–5 display a similar arrangement, having anionic chains with a wavy structure and bulky (PPh4)+ cations placed between the chains. The presence of the (PPh4)+ cations hinders the existence of intermolecular Ag-Ag interactions although several C-H····π interactions have been observed. A similar reaction between [Rh2(μ-O2CCMe3)4(HO2CCMe3)2] and PPh4[Ag(CN)2] led to the molecular compound (PPh4)2{Rh2(μ-O2CCMe3)4[Ag(CN)2]2} (6) by replacement of the axial HO2CCMe3 ligands by two [Ag(CN)2]− units. The trimethylacetate ligand increases the solubility of the complex during the crystallization favouring the formation of discrete heteronuclear species.
Open AccessSynthesis and Structural Characterization of a Series of One-Dimensional Heteronuclear Dirhodium-Silver Coordination Polymers
Herein, we describe the preparation of heteronuclear dirhodium-silver complexes by reaction between molecular Rh(II)-Rh(II) compounds [Rh2(μ-O2CR)4L2] (R = Me, Ph (1), CH2OEt (2); L = solvent molecules) with paddlewheel structure and PPh4[Ag(CN)2]. One-dimensional coordination polymers of (PPh4)n[Rh2(μ-O2CR)4Ag(CN)2]n (R = Me (3), Ph (4), CH2OEt (5)) formula have been obtained by replacement of the two labile molecules in the axial positions of the paddlewheel structures by a [Ag(CN)2]− bridging unit. The crystal structures of 3–5 display a similar arrangement, having anionic chains with a wavy structure and bulky (PPh4)+ cations placed between the chains. The presence of the (PPh4)+ cations hinders the existence of intermolecular Ag-Ag interactions although several C-H····π interactions have been observed. A similar reaction between [Rh2(μ-O2CCMe3)4(HO2CCMe3)2] and PPh4[Ag(CN)2] led to the molecular compound (PPh4)2{Rh2(μ-O2CCMe3)4[Ag(CN)2]2} (6) by replacement of the axial HO2CCMe3 ligands by two [Ag(CN)2]− units. The trimethylacetate ligand increases the solubility of the complex during the crystallization favouring the formation of discrete heteronuclear species.
- Open Access
- 23 January 2018
- Published by International Union of Crystallography (IUCr) in IUCrData
- Vol. 3 (1) , x180079
catena-Poly[[tetrakis(μ-3,4,5-trimethoxybenzoato-κ2 O:O′)diruthenium(II,III)(Ru—Ru)]-μ-chlorido] with an unknown solvent
[Ru2Cl{μ-O2CC6H2-3,4,5-(OMe)3}4] n was prepared by the reaction of [Ru2Cl(μ-O2CCH3] n with 3,4,5-trimethoxybenzoic acid. The complex shows a paddlewheel structure with pairs of Ru atoms bridged by four carboxylate ligands. The axial positions are occupied by shared chloride ions giving zigzag chains. These chains are disposed parallel to each other to give a three-dimensional arrangement packed only by van der Waals forces. The final refinement shows high values of residual non-modelled electronic density. Therefore, the SQUEEZE utility [Spek (2015). Acta Cryst. C71, 9–18] was used to remove its contribution to the overal intensity data. The electron density modelled by SQUEEZE is consistent with around eight water molecules per unit cell.
- 23 January 2018
- Published by International Union of Crystallography (IUCr) in IUCrData
- Vol. 3 (1) , x180079
Open Accesscatena-Poly[[tetrakis(μ-3,4,5-trimethoxybenzoato-κ2 O:O′)diruthenium(II,III)(Ru—Ru)]-μ-chlorido] with an unknown solvent
[Ru2Cl{μ-O2CC6H2-3,4,5-(OMe)3}4] n was prepared by the reaction of [Ru2Cl(μ-O2CCH3] n with 3,4,5-trimethoxybenzoic acid. The complex shows a paddlewheel structure with pairs of Ru atoms bridged by four carboxylate ligands. The axial positions are occupied by shared chloride ions giving zigzag chains. These chains are disposed parallel to each other to give a three-dimensional arrangement packed only by van der Waals forces. The final refinement shows high values of residual non-modelled electronic density. Therefore, the SQUEEZE utility [Spek (2015). Acta Cryst. C71, 9–18] was used to remove its contribution to the overal intensity data. The electron density modelled by SQUEEZE is consistent with around eight water molecules per unit cell.
- Open Access
Synthesis, Crystal Structure, and Magnetic Properties of Amidate and Carboxylate Dimers of Ruthenium
Solvothermal and microwave-assisted methods have been used to prepare several amidate and carboxylate complexes of the type [Ru2X(µ-NHOCC6H3-3,5-(OMe)2)4]n [X = Cl (1), Br (2), I (3)] and [Ru2X(µ-O2CC6H3-3,5-(OMe)2)4]n [X = Cl (4), Br (5), I (6)]. Complexes 4–6 have also been obtained by conventional synthesis which is ineffective to prepare the amidate compounds. However, single crystals of complexes 1–5 were obtained using the solvothermal method. The single crystal X-ray structure determination of compounds 1–5 have been carried out. All complexes display a paddlewheel-type structure with the metal atoms connected by four bridging amidate or carboxylate ligands. Chloride, bromide, or iodide anions connect the dimetallic units, producing one-dimensional zigzag chains. The magnetic properties of all compounds were studied. The magnetic moment at room temperature are in accordance with an electronic configuration with three unpaired electrons σ2π4δ2(π*δ*)3 per dimer unit. The fit of the magnetic data suggests the existence, in these complexes, of a weak antiferromagnetic intermolecular interaction between the diruthenium units mediated by the halide ligand and an appreciable zero-field splitting in the diruthenium moieties.
Open AccessSynthesis, Crystal Structure, and Magnetic Properties of Amidate and Carboxylate Dimers of Ruthenium
Solvothermal and microwave-assisted methods have been used to prepare several amidate and carboxylate complexes of the type [Ru2X(µ-NHOCC6H3-3,5-(OMe)2)4]n [X = Cl (1), Br (2), I (3)] and [Ru2X(µ-O2CC6H3-3,5-(OMe)2)4]n [X = Cl (4), Br (5), I (6)]. Complexes 4–6 have also been obtained by conventional synthesis which is ineffective to prepare the amidate compounds. However, single crystals of complexes 1–5 were obtained using the solvothermal method. The single crystal X-ray structure determination of compounds 1–5 have been carried out. All complexes display a paddlewheel-type structure with the metal atoms connected by four bridging amidate or carboxylate ligands. Chloride, bromide, or iodide anions connect the dimetallic units, producing one-dimensional zigzag chains. The magnetic properties of all compounds were studied. The magnetic moment at room temperature are in accordance with an electronic configuration with three unpaired electrons σ2π4δ2(π*δ*)3 per dimer unit. The fit of the magnetic data suggests the existence, in these complexes, of a weak antiferromagnetic intermolecular interaction between the diruthenium units mediated by the halide ligand and an appreciable zero-field splitting in the diruthenium moieties.
- Open Access
- 3 September 2014
- Published by MDPI AG in Inorganics
- Vol. 2 (3) , 524-536
Synthesis of Ru2Br(μ-O2CC6H4–R)4 (R = o-Me, m-Me, p-Me) Using Microwave Activation: Structural and Magnetic Properties
New bromidotetracarboxylatodiruthenium(II,III) compounds of the type [Ru2Br(μ-O2CC6H4–R)4]n [R = o-Me (1), m-Me (2), p-Me (3)] have been prepared using microwave-assisted methods. Syntheses by means of solvothermal and conventional activations have also been carried out to compare different preparation methods. The crystal structure determination of complexes 1–3 is also described. All compounds display a typical carboxylate-bridged paddlewheel-type structure with the metal atoms connected by four bridging carboxylate ligands. The axial bromide ligands connect the dimetallic units giving one-dimensional zigzag chains. The magnetic properties of all compounds have also been analyzed. Weak antiferromagnetic intermolecular interactions mediated by the bromide ligands and an appreciable zero field splitting are calculated in the fits of the magnetic data of these complexes.
- 3 September 2014
- Published by MDPI AG in Inorganics
- Vol. 2 (3) , 524-536
Open AccessSynthesis of Ru2Br(μ-O2CC6H4–R)4 (R = o-Me, m-Me, p-Me) Using Microwave Activation: Structural and Magnetic Properties
New bromidotetracarboxylatodiruthenium(II,III) compounds of the type [Ru2Br(μ-O2CC6H4–R)4]n [R = o-Me (1), m-Me (2), p-Me (3)] have been prepared using microwave-assisted methods. Syntheses by means of solvothermal and conventional activations have also been carried out to compare different preparation methods. The crystal structure determination of complexes 1–3 is also described. All compounds display a typical carboxylate-bridged paddlewheel-type structure with the metal atoms connected by four bridging carboxylate ligands. The axial bromide ligands connect the dimetallic units giving one-dimensional zigzag chains. The magnetic properties of all compounds have also been analyzed. Weak antiferromagnetic intermolecular interactions mediated by the bromide ligands and an appreciable zero field splitting are calculated in the fits of the magnetic data of these complexes.
- 2 August 2012
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 41 (38) , 11866-11874
Comparative study of different methods for the preparation of tetraamidato- and tetracarboxylatodiruthenium compounds. Structural and magnetic characterization
Solvothermal and microwave assisted synthesis were used as green and very useful alternative methods to obtain new chloridotetraamidatodiruthenium compounds, [Ru2Cl(μ-NHOCR)4]n [R = Me-o-C6H4 (1), Me-m-C6H4 (2), Me-p-C6H4 (3)]. The analogous tetracarboxylato complexes [Ru2Cl(μ-O2CR)4]n [R = Me-o-C6H4 (4), Me-m-C6H4 (5), Me-p-C6H4 (6)] have also been obtained. These synthetic methods allow the use of greener solvents like water or ethanol. Moreover, solvothermal synthesis permits the direct crystallization of the desired complexes, which are extremely insoluble in common solvents, during the synthetic process. Therefore, the crystal structure of all of them has been established using single crystal X-ray diffraction. Complex 1 shows a Ru–Cl–Ru angle of 180° and constitutes the first example of a chloridotetraamidatodiruthenium derivative displaying linear chains in the solid state. In contrast, complexes 2·0.5EtOH, and 3–6 show polymeric arrangements with the diruthenium units linked by chloride ligands, forming zigzag chains with Ru–Cl–Ru angles ranging between 117.03(6) and 121.45(3)°. All of the complexes show magnetic moments at room temperature corresponding to three unpaired electrons in agreement with the σ2π4δ2(π*δ*)3 ground-state configuration, which indicates a similar magnetic behaviour in amidato and carboxylato derivatives. In the linear arrangement of complex 1 there is a better magnetic communication between diruthenium units (antiferromagnetic coupling, zJ = −10.5 or −8.7 cm−1) than the one observed in the zigzag 2–6 complexes (zJ = −1.23 to −5.75 cm−1).
- 2 August 2012
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 41 (38) , 11866-11874
Comparative study of different methods for the preparation of tetraamidato- and tetracarboxylatodiruthenium compounds. Structural and magnetic characterization
Solvothermal and microwave assisted synthesis were used as green and very useful alternative methods to obtain new chloridotetraamidatodiruthenium compounds, [Ru2Cl(μ-NHOCR)4]n [R = Me-o-C6H4 (1), Me-m-C6H4 (2), Me-p-C6H4 (3)]. The analogous tetracarboxylato complexes [Ru2Cl(μ-O2CR)4]n [R = Me-o-C6H4 (4), Me-m-C6H4 (5), Me-p-C6H4 (6)] have also been obtained. These synthetic methods allow the use of greener solvents like water or ethanol. Moreover, solvothermal synthesis permits the direct crystallization of the desired complexes, which are extremely insoluble in common solvents, during the synthetic process. Therefore, the crystal structure of all of them has been established using single crystal X-ray diffraction. Complex 1 shows a Ru–Cl–Ru angle of 180° and constitutes the first example of a chloridotetraamidatodiruthenium derivative displaying linear chains in the solid state. In contrast, complexes 2·0.5EtOH, and 3–6 show polymeric arrangements with the diruthenium units linked by chloride ligands, forming zigzag chains with Ru–Cl–Ru angles ranging between 117.03(6) and 121.45(3)°. All of the complexes show magnetic moments at room temperature corresponding to three unpaired electrons in agreement with the σ2π4δ2(π*δ*)3 ground-state configuration, which indicates a similar magnetic behaviour in amidato and carboxylato derivatives. In the linear arrangement of complex 1 there is a better magnetic communication between diruthenium units (antiferromagnetic coupling, zJ = −10.5 or −8.7 cm−1) than the one observed in the zigzag 2–6 complexes (zJ = −1.23 to −5.75 cm−1).