GCGenxiang Chen

Genxiang Chen

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Genxiang Chen has a total of 31 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    The Design of a Fiber-Coupling Micro-Lens Array for an M × N Wavelength-Selective Switch

    by Jiaqi Hao, Yunshu Gao, Chengcheng Dong, Zeyuan Meng, Genxiang Chen

    The M × N port wavelength-selective switch (WSS) is a crucial device used for Reconfigurable Optical Add/Drop Multiplexors and optical switching nodes in optical communication systems. The primary function of an M × N port WSS is to simultaneously transmit and switch multiple input optical signals from input fiber ports to output fiber ports through spatial light coupling. The port array module in a WSS that is responsible for coupling the spatial beam with the fiber determines the important parameters of the M × N port WSS, such as the number of input/output ports and insertion loss. In this paper, VirtualLab Fusion software 2023.1 (Build 1.558), as a powerful physical optics simulation tool, is used to design and optimize a silicon micro-lens array that can achieve the high-precision coupling of a fiber array with a pitch of 1143 μm. Finally, the designed micro-lens is manufactured and experimentally demonstrates its good beam focusing ability with a 3 dB insertion loss. The designed micro-lens array coupling system, which delivers 28 focused spots of approximately 1mm in size (the beam has a 1/e2 diameter) after transmitting a distance of around 300 mm, effectively extends the number of WSS ports. This design method of the micro-lens array significantly amplifies the port count of the M × N port wavelength-selective switch, effectively expanding it to encompass an impressive 28 × 28 ports.


  • Open Access

    A Segmented Hybrid Algorithm for Beam Shaping Combining Iterative and Simulated Annealing Approaches

    by Xiaoyu Zhang, Qi Zhang, Genxiang Chen

    In recent years, laser technology has made significant advancements, yet there are specific requirements for the energy concentration and uniformity of lasers in various fields, such as optical communication, laser processing, 3D printing, etc. Beam shaping technology enables the transformation of ordinary Gaussian-distributed laser beams into square or circular flat-top uniform beams. Currently, LCOS-based beam shaping algorithms do not adequately meet these requirements, and most of these algorithms do not simultaneously consider the impact of phase quantization and zero-padding, leading to a decrease in the practicality of phase holograms. To address these issues, this paper proposes a novel segmented beam shaping algorithm that combines iterative and simulated annealing approaches. This paper validated the reliability of the proposed algorithm through numerical simulations. Compared to other algorithms, the proposed algorithm can effectively reduce the root mean square error by an average of nearly 37% and decrease the uniformity error by almost 39% without a significant decrease in diffraction efficiency.


  • Open Access

    LCOS-SLM Based Intelligent Hybrid Algorithm for Beam Splitting

    by Xiaoyu Zhang, Genxiang Chen, Qi Zhang

    The iterative Fourier transform algorithm (IFTA) is widely used in various optical communication applications based on liquid crystal on silicon spatial light modulators. However, the traditional iterative method has many disadvantages, such as a poor effect, an inability to select an optimization direction, and the failure to consider zero padding or phase quantization. Moreover, after years of development, the emergence of various variant algorithms also makes it difficult for researchers to choose one. In this paper, a new intelligent hybrid algorithm that combines the IFTA and differential evolution algorithm is proposed in a novel way. The reliability of the proposed algorithm is verified by beam splitting, and the IFTA and symmetrical IFTA algorithms, for comparison, are introduced. The hybrid algorithm improves the defects above while considering the zero padding and phase quantization of a computer-generated hologram, which optimizes the directional optimization in the diffraction efficiency and the fidelity of the output beam and improves the results of these two algorithms. As a result, the engineers’ trouble in the selection of an algorithm has also been reduced.


  • Study on the reconfiguration and switching of subcarriers in all‐optical orthogonal frequency division multiplexing system

    by Yu Chao, Genxiang Chen, Qinghua Tian, Xiaoyu Zhang

    We propose a subcarrier‐switching method for all‐optical orthogonal frequency division multiplexing (AO‐OFDM) system. In addition, analysis of the affected neighboring subcarriers, along with the subcarriers being added or dropped, is carried out in a comprehensive manner. After switching operation four times, target subcarrier can still have a Q value larger than 27, while Q value of neighboring orthogonal subcarriers exceeds 31 in AO‐OFDM system with 16 orthogonal subcarriers.


  • Open Access

    Wavelength-Flexible Thulium-Doped Fiber Laser Based on Digital Micromirror Array

    by Xiao Chen, Dezheng Dai, Yi Zhang, Hongyuan Wu, Yunshu Gao, Genxiang Chen, Yiquan Wang

    Wavelength-tunable thulium-doped fiber laser is demonstrated employing a digital micromirror device (DMD) in combination with a fixed grating. The diffraction property of four typical models of DMDs and its steering efficiency for the laser system are analyzed based on two-dimensional grating theory. By spatially modulating reflective patterns on a DMD, the stable, fast, and flexible tuning of lasing wavelength from 1930 nm to 2000 nm is achieved with wavelength tuning accuracy of 0.1 nm. The side-mode suppression ratio is larger than 50 dB around the 2 μm band with 3 dB linewidth less than 0.05 nm. The wavelength drift and power fluctuation are lower than 0.05 nm and 0.1 dB within 1 h at the room temperature, respectively.


  • Kramers-Kronig Carrierless Amplitude/Phase Modulation System without Extra Digital Upsampling

    by Chao Yu, Genxiang Chen, Xishuo Wang, Xia Sheng, Xing Xu, Yongjun Wang

    We propose a new transceiver solution named KK-CAP-NQAM that combines Kramers-Kronig (KK) reception with carrierless amplitude/phase modulation (CAP) technology. This system's KK receiver operates without extra digital upsampling.

  • Open Access

    Programmable Spectral Filter in C-Band Based on Digital Micromirror Device

    by Yunshu Gao, Xiao Chen, Genxiang Chen, Zhongwei Tan, Qiao Chen, Dezheng Dai, Qian Zhang, Chao Yu

    Optical filters have been adopted in many applications such as reconfigurable telecommunication switches, tunable lasers and spectral imaging. However, most of commercialized filters based on a micro-electrical-mechanical system (MEMS) only provide a minimum bandwidth of 25 GHz in telecom so far. In this work, the programmable filter based on a digital micromirror device (DMD) experimentally demonstrated a minimum bandwidth of 12.5 GHz in C-band that matched the grid width of the International Telecommunication Union (ITU) G.694.1 standard. It was capable of filtering multiple wavebands simultaneously and flexibly by remotely uploading binary holograms onto the DMD. The number of channels and the center wavelength could be adjusted independently, as well as the channel bandwidth and the output power. The center wavelength tuning resolution of this filter achieved 0.033 nm and the insertion loss was about 10 dB across the entire C-band. Since the DMD had a high power handling capability (25 KW/cm2) of around 200 times that of the liquid crystal on silicon (LCoS) chip, the DMD-based filters are expected to be applied in high power situations.


  • Open Access

    Tunable Fiber Laser with High Tuning Resolution in C-band Based on Echelle Grating and DMD Chip

    by Jinliang Li, Xiao Chen, Dezheng Dai, Yunshu Gao, Min Lv, Genxiang Chen

    The tunable fiber laser with high tuning resolution in the C-band is proposed and demonstrated based on a digital micromirror device (DMD) chip and an echelle grating. The laser employs a DMD as a programmable wavelength filter and an echelle grating with high-resolution features to design a cross-dispersion optical path to achieve high-precision tuning. Experimental results show that wavelength channels with 3 dB-linewidth less than 0.02 nm can be tuned flexibly in the C-band and the wavelength tuning resolution is as small as 0.036 nm. The output power fluctuation is better than 0.07 dB, and the wavelength shift is below 0.013 nm in 1 h at room temperature.


  • Open Access

    High-Resolution Tunable Filter With Flexible Bandwidth and Power Attenuation Based on an LCoS Processor

    by Yunshu Gao, Genxiang Chen, Xiao Chen, Qian Zhang, Qiao Chen, Ce Zhang, Kai Tian, Zhongwei Tan, Chao Yu

    High-resolution optical filters and wavelength selective switches are the essential components in the current and next-generation dynamic optical networks. A high-resolution programmable filter for telecom application is proposed and experimentally demonstrated based on a 4k phase-only liquid crystal on silicon (LCoS) spatial light modulator. The tuning resolution, bandwidth and power attenuation for each wavelength-channel can be modulated independently by remote software control. For each channel, the center wavelength is tuned in the step of 7.5 $\pm$ 1 pm and the 3 dB-bandwidth achieves from 10 GHz to 3 THz. Furthermore, by multi-casting hologram design techniques for an LCoS, the power attenuation is adjusted from 0 dB to 30 dB with the step of 0.1 dB. The insertion loss is less than 6 dB across the entire C-band, and 1.8 dB of it can be further improved by adopting an LCoS chip with smaller reflection loss.


  • Open Access

    Wavelength and bandwidth tunable passively mode-locked fiber laser based on semiconductor saturable absorber mirror and liquid crystal on silicon device

    by Kai Tian, Genxiang Chen, Yunshu Gao

    Using a liquid crystal on silicon (LCoS) device as tunable filter, we experimentally demonstrate a wavelength and bandwidth tunable passively mode-locked fiber laser. The key feature of this laser is that any wavelength with any bandwidth can be tuned independently over the whole C-band, which is flexibly driven by only a single LCoS chip. The outputs exhibit excellent tuning capacity and high consistency in the C-band, using a 0.1 nm wavelength-tuning step. The filter bandwidth can be set to any width within the wavelength range, while the pulse width varies from 9 to 50 ps.