Chunsheng Li
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Chunsheng Li has a total of 34 co-authors. Here are the top co-authors by number of shared publications:
- Wei Liu
Hong Kong Polytechnic University
9 shared publications - Jie Chen
School of Electronic and Information Engineering, Beihang University, Bejing 100191, China
8 shared publications - Huaping Xu
School of Electronic and Information Engineering, Beihang University, Beijing, China
6 shared publications - Shuo Li
Nanjing Research Institute of Electronics Technology, Nanjing, China
4 shared publications - Wei Yang
School of Electronic and Information Engineering, Beihang University, Beijing 100191, China
4 shared publications - Guobing Zeng
School of Electronic and Information Engineering, Beihang University, Beijing, China
3 shared publications
Latest Publications
- Open Access
- 22 July 2025
- Published by MDPI AG in Remote Sensing
- Vol. 17 (15) , 2545
An Efficient Ship Target Integrated Imaging and Detection Framework (ST-IIDF) for Space-Borne SAR Echo Data
Due to the sparse distribution of ship targets in wide-area offshore scenarios, the typical cascade mode of imaging and detection for space-borne Synthetic Aperture Radar (SAR) echo data would consume substantial computational time and resources, severely affecting the timeliness of ship target information acquisition tasks. Therefore, we propose a ship target integrated imaging and detection framework (ST-IIDF) for SAR oceanic region data. A two-step filtering structure is added in the SAR imaging process to extract the potential areas of ship targets, which can accelerate the whole process. First, an improved peak-valley detection method based on one-dimensional scattering characteristics is used to locate the range gate units for ship targets. Second, a dynamic quantization method is applied to the imaged range gate units to further determine the azimuth region. Finally, a lightweight YOLO neural network is used to eliminate false alarm areas and obtain accurate positions of the ship targets. Through experiments on Hisea-1 and Pujiang-2 data, within sparse target scenes, the framework maintains over 90% accuracy in ship target detection, with an average processing speed increase of 35.95 times. The framework can be applied to ship target detection tasks with high timeliness requirements and provides an effective solution for real-time onboard processing.
- 22 July 2025
- Published by MDPI AG in Remote Sensing
- Vol. 17 (15) , 2545
Open AccessAn Efficient Ship Target Integrated Imaging and Detection Framework (ST-IIDF) for Space-Borne SAR Echo Data
Due to the sparse distribution of ship targets in wide-area offshore scenarios, the typical cascade mode of imaging and detection for space-borne Synthetic Aperture Radar (SAR) echo data would consume substantial computational time and resources, severely affecting the timeliness of ship target information acquisition tasks. Therefore, we propose a ship target integrated imaging and detection framework (ST-IIDF) for SAR oceanic region data. A two-step filtering structure is added in the SAR imaging process to extract the potential areas of ship targets, which can accelerate the whole process. First, an improved peak-valley detection method based on one-dimensional scattering characteristics is used to locate the range gate units for ship targets. Second, a dynamic quantization method is applied to the imaged range gate units to further determine the azimuth region. Finally, a lightweight YOLO neural network is used to eliminate false alarm areas and obtain accurate positions of the ship targets. Through experiments on Hisea-1 and Pujiang-2 data, within sparse target scenes, the framework maintains over 90% accuracy in ship target detection, with an average processing speed increase of 35.95 times. The framework can be applied to ship target detection tasks with high timeliness requirements and provides an effective solution for real-time onboard processing.
- 18 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 62 (01962892) , 1-19
MBInSAR-BM4D: A Multibaseline InSAR Interferometric Phase Noise Suppression Method Based on BM4D
Multibaseline InSAR (MB-InSAR) has attracted widespread attention as it can improve the measurement accuracy of elevation or deformation by exploring baseline diversity. However, the interferometric phase is normally contaminated by phase noise, which directly affects the measurement accuracy. In this paper, an MB-InSAR interferometric phase noise suppression method based on BM4D (MBInSAR-BM4D) is proposed. To increase the number of similar cuboids for grouping, a topographic phase compensation strategy is introduced, which can reduce fringe density in complex topography. In addition, to accurately select similar cuboids from residual interferometric phase stack and collect them into 4-D groups, the generalized likelihood-ratio (GLR) test is applied, in which the observed amplitude, coherence and phase are utilized simultaneously for improving grouping accuracy. After performing collaborative filtering and aggregation on 4-D groups, the MB-InSAR interferometric phase stack noise suppression results are obtained by adding the reference phase back to the corresponding filtered residual interferometric phase. All interferometric phases are fully exploited to facilitate MB-InSAR phase stack filtering performance enhancement. Experimental results on both the simulated and real MB-InSAR data demonstrate that the proposed MBInSAR-BM4D provides superior noise suppression and fringe detail preservation for MB-InSAR interferometric phase stack.
- 18 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 62 (01962892) , 1-19
MBInSAR-BM4D: A Multibaseline InSAR Interferometric Phase Noise Suppression Method Based on BM4D
Multibaseline InSAR (MB-InSAR) has attracted widespread attention as it can improve the measurement accuracy of elevation or deformation by exploring baseline diversity. However, the interferometric phase is normally contaminated by phase noise, which directly affects the measurement accuracy. In this paper, an MB-InSAR interferometric phase noise suppression method based on BM4D (MBInSAR-BM4D) is proposed. To increase the number of similar cuboids for grouping, a topographic phase compensation strategy is introduced, which can reduce fringe density in complex topography. In addition, to accurately select similar cuboids from residual interferometric phase stack and collect them into 4-D groups, the generalized likelihood-ratio (GLR) test is applied, in which the observed amplitude, coherence and phase are utilized simultaneously for improving grouping accuracy. After performing collaborative filtering and aggregation on 4-D groups, the MB-InSAR interferometric phase stack noise suppression results are obtained by adding the reference phase back to the corresponding filtered residual interferometric phase. All interferometric phases are fully exploited to facilitate MB-InSAR phase stack filtering performance enhancement. Experimental results on both the simulated and real MB-InSAR data demonstrate that the proposed MBInSAR-BM4D provides superior noise suppression and fringe detail preservation for MB-InSAR interferometric phase stack.
- Open Access
- 20 September 2024
- Published by MDPI AG in Remote Sensing
- Vol. 16 (18) , 3487
Ship Wake Detection in a Single SAR Image via a Modified Low-Rank Constraint
Ship wake detection stands as a pivotal task in marine environment monitoring. The main challenge in ship wake detection is to improve detection accuracy and mitigate false alarms. To address this challenge, a novel procedure for ship wake detection in a single SAR image is proposed in this study. Initially, an entropy distance similarity criterion is designed to measure nonlocal image patch similarity. Based on the proposed criterion, a low-rank and sparse decomposition method is modified using nonlocal similar patch matrix construction to separate the sparse wake. Subsequently, a field-of-experts (FOE) model is introduced to generate a series of multi-view wake feature maps, which are fused to construct an enhanced feature map. The sparse wake is further enhanced in the Radon domain with the enhanced feature map. The experimental results demonstrate the effectiveness of the proposed method on real SAR ship wake images.
- 20 September 2024
- Published by MDPI AG in Remote Sensing
- Vol. 16 (18) , 3487
Open AccessShip Wake Detection in a Single SAR Image via a Modified Low-Rank Constraint
Ship wake detection stands as a pivotal task in marine environment monitoring. The main challenge in ship wake detection is to improve detection accuracy and mitigate false alarms. To address this challenge, a novel procedure for ship wake detection in a single SAR image is proposed in this study. Initially, an entropy distance similarity criterion is designed to measure nonlocal image patch similarity. Based on the proposed criterion, a low-rank and sparse decomposition method is modified using nonlocal similar patch matrix construction to separate the sparse wake. Subsequently, a field-of-experts (FOE) model is introduced to generate a series of multi-view wake feature maps, which are fused to construct an enhanced feature map. The sparse wake is further enhanced in the Radon domain with the enhanced feature map. The experimental results demonstrate the effectiveness of the proposed method on real SAR ship wake images.
- 9 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 62 (01962892) , 1-12
Information-Theoretic Approach to Joint Design of Waveform and Receiver Filter With Desired Cross-Correlation Properties for Imaging Radar
An imaging radar is expected to provide high quality images for interesting targets. To this end, an information-theoretic approach is employed in this paper to jointly optimize waveform and receive filter with desired cross-correlation properties. First, the problem formulation is achieved by maximizing the mutual information, subject to constant modulus, high resolution and low peak sidelobe ratio constraints. Second, to solve the resultant problem with a fractional quadratic objective function and various nonconvex constraints, four customized iterative loops are performed to transform the problem into a series of solvable subproblems, via minorization-maximization, alternate direction penalty method and feasible point pursuit successive convex approximation. Convergence of every iterative loop is proved, resulting in guaranteed convergence of the whole procedure with polynomial-time complexity. Finally, numerical examples are presented to demonstrate that the proposed method can construct a unimodular waveform and filter with better information acquisition ability and more desirable cross-correlation function.
- 9 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 62 (01962892) , 1-12
Information-Theoretic Approach to Joint Design of Waveform and Receiver Filter With Desired Cross-Correlation Properties for Imaging Radar
An imaging radar is expected to provide high quality images for interesting targets. To this end, an information-theoretic approach is employed in this paper to jointly optimize waveform and receive filter with desired cross-correlation properties. First, the problem formulation is achieved by maximizing the mutual information, subject to constant modulus, high resolution and low peak sidelobe ratio constraints. Second, to solve the resultant problem with a fractional quadratic objective function and various nonconvex constraints, four customized iterative loops are performed to transform the problem into a series of solvable subproblems, via minorization-maximization, alternate direction penalty method and feasible point pursuit successive convex approximation. Convergence of every iterative loop is proved, resulting in guaranteed convergence of the whole procedure with polynomial-time complexity. Finally, numerical examples are presented to demonstrate that the proposed method can construct a unimodular waveform and filter with better information acquisition ability and more desirable cross-correlation function.
- 24 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 61 (01962892) , 1-15
A Method for Selecting SAR Interferometric Pairs Based on Coherence Spectral Clustering
To achieve accurate interferometric synthetic aperture radar (SAR) phase estimation, it is essential to select appropriate high-coherence interferometric pairs from massive SAR single-look complex (SLC) image data. The selection should include as many high-coherence interferometric pairs as possible while avoiding low-coherence pairs. By combining coherence and spectral clustering, a novel selection method for SAR interferometric pairs is proposed in this paper. The proposed method can be adopted to classify SAR SLC images into different clusters, where the total coherence of interferometric pairs in the same cluster is maximized while that among the different clusters is minimized. This is implemented by averaging the coherence matrices of representative pixels to construct an adjacency matrix and performing eigenvalue decomposition for estimating the number of clusters. The effectiveness of the proposed method is demonstrated using 33 TerraSAR-X and 38 dual-polarization Sentinel-1A data samples, yielding improved topography and deformation monitoring results.
- 24 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 61 (01962892) , 1-15
A Method for Selecting SAR Interferometric Pairs Based on Coherence Spectral Clustering
To achieve accurate interferometric synthetic aperture radar (SAR) phase estimation, it is essential to select appropriate high-coherence interferometric pairs from massive SAR single-look complex (SLC) image data. The selection should include as many high-coherence interferometric pairs as possible while avoiding low-coherence pairs. By combining coherence and spectral clustering, a novel selection method for SAR interferometric pairs is proposed in this paper. The proposed method can be adopted to classify SAR SLC images into different clusters, where the total coherence of interferometric pairs in the same cluster is maximized while that among the different clusters is minimized. This is implemented by averaging the coherence matrices of representative pixels to construct an adjacency matrix and performing eigenvalue decomposition for estimating the number of clusters. The effectiveness of the proposed method is demonstrated using 33 TerraSAR-X and 38 dual-polarization Sentinel-1A data samples, yielding improved topography and deformation monitoring results.
- 1 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Chinese Journal of Electronics
- Vol. 32 (5) , 1089-1105
A Novel Adaptive InSAR Phase Filtering Method Based on Complexity Factors
Phase filtering is an essential step in interferometric synthetic aperture radar (InSAR) imaging. For interferograms of complicated and changeable terrain, the increasing resolution of InSAR images makes it even more difficult. In this paper, a novel adaptive InSAR phase filtering method based on complexity factors is proposed. Firstly, three complexity factors based on the noise distribution and terrain slope information of the interferogram are selected. The complexity indicator composed of three complexity factors is used to guide the adaptive selection of the most suitable and effective filtering strategies for different areas. Then, the complexity scalar is calculated, which can guide the adaptive local fringe frequency estimation and adaptive parameters calculation in different filter methods. Finally, validations are performed on the simulated and real data. The performance comparison between the other three representative phase filtering method and the proposed method have validated the effectiveness and superiority of the proposed method.
- 1 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Chinese Journal of Electronics
- Vol. 32 (5) , 1089-1105
A Novel Adaptive InSAR Phase Filtering Method Based on Complexity Factors
Phase filtering is an essential step in interferometric synthetic aperture radar (InSAR) imaging. For interferograms of complicated and changeable terrain, the increasing resolution of InSAR images makes it even more difficult. In this paper, a novel adaptive InSAR phase filtering method based on complexity factors is proposed. Firstly, three complexity factors based on the noise distribution and terrain slope information of the interferogram are selected. The complexity indicator composed of three complexity factors is used to guide the adaptive selection of the most suitable and effective filtering strategies for different areas. Then, the complexity scalar is calculated, which can guide the adaptive local fringe frequency estimation and adaptive parameters calculation in different filter methods. Finally, validations are performed on the simulated and real data. The performance comparison between the other three representative phase filtering method and the proposed method have validated the effectiveness and superiority of the proposed method.
- Open Access
- 11 October 2020
- Published by MDPI AG in Remote Sensing
- Vol. 12 (20) , 3302
Refocusing High-Resolution SAR Images of Complex Moving Vessels Using Co-Evolutionary Particle Swarm Optimization
To increase the global convergence and processing efficiency of particle swarm optimization (PSO) applied in the adaptive joint time-frequency, in this study an improved PSO is proposed to refocus the high-resolution SAR images of complex moving vessels in high sea states. According to the characteristics of the high-order multi-component polynomial phase signal, this algorithm provides parallel processing and co-evolution methods by setting the different permissions of the sub-population and sharing its search information. As a result, the multiple components can be extracted simultaneously. Experiments were conducted using the simulation data and Gaofen-3 (GF-3) SAR data. Results showed the processing speed increased by more than 40% and the global convergence was significantly improved. The imaging results verify the efficiency and robustness of this co-evolutionary PSO.
- 11 October 2020
- Published by MDPI AG in Remote Sensing
- Vol. 12 (20) , 3302
Open AccessRefocusing High-Resolution SAR Images of Complex Moving Vessels Using Co-Evolutionary Particle Swarm Optimization
To increase the global convergence and processing efficiency of particle swarm optimization (PSO) applied in the adaptive joint time-frequency, in this study an improved PSO is proposed to refocus the high-resolution SAR images of complex moving vessels in high sea states. According to the characteristics of the high-order multi-component polynomial phase signal, this algorithm provides parallel processing and co-evolution methods by setting the different permissions of the sub-population and sharing its search information. As a result, the multiple components can be extracted simultaneously. Experiments were conducted using the simulation data and Gaofen-3 (GF-3) SAR data. Results showed the processing speed increased by more than 40% and the global convergence was significantly improved. The imaging results verify the efficiency and robustness of this co-evolutionary PSO.
- Open Access
- 11 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 13 (19391404) , 5414-5423
An Improved Airborne Multichannel SAR Imaging Method With Motion Compensation and Range-Variant Channel Mismatch Correction
To obtain high resolution and wide swath (HRWS) image, the azimuth multi-channel technique has been widely used in synthetic aperture radar (SAR) systems to overcome the contradiction between wide swath and high pulse repetition frequency (PRF). For high image quality, channel mismatch correction is an essential step in multi-channel SAR data imaging. However, in the case of airborne multi-channel SAR, motion errors will severely degrade the performance of channel mismatch correction. To deal with this problem, this paper proposes an improved airborne multi-channel SAR imaging method with motion compensation (MOCO) and range-variant channel mismatch correction. Firstly, motion errors are compensated based on resampling and phase compensation. Then the time delay error and constant gain-phase error between channels are estimated and corrected, followed by range-variant phase error correction based on a novel range-down-sampling method, which reduces the influence of motion errors on channel mismatch correction significantly. Finally, simulated and real data processing results are used to demonstrate the effectiveness of the proposed method.
- 11 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 13 (19391404) , 5414-5423
Open AccessAn Improved Airborne Multichannel SAR Imaging Method With Motion Compensation and Range-Variant Channel Mismatch Correction
To obtain high resolution and wide swath (HRWS) image, the azimuth multi-channel technique has been widely used in synthetic aperture radar (SAR) systems to overcome the contradiction between wide swath and high pulse repetition frequency (PRF). For high image quality, channel mismatch correction is an essential step in multi-channel SAR data imaging. However, in the case of airborne multi-channel SAR, motion errors will severely degrade the performance of channel mismatch correction. To deal with this problem, this paper proposes an improved airborne multi-channel SAR imaging method with motion compensation (MOCO) and range-variant channel mismatch correction. Firstly, motion errors are compensated based on resampling and phase compensation. Then the time delay error and constant gain-phase error between channels are estimated and corrected, followed by range-variant phase error correction based on a novel range-down-sampling method, which reduces the influence of motion errors on channel mismatch correction significantly. Finally, simulated and real data processing results are used to demonstrate the effectiveness of the proposed method.
- Open Access
- 19 August 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 13 (19391404) , 4947-4959
An Interferometric Phase Noise Reduction Method Based on Modified Denoising Convolutional Neural Network
Traditional interferometric synthetic aperture radar (InSAR) denoising methods normally try to estimate the phase fringes directly from the noisy interferogram. Since the statistics of phase noise are more stable than the phase corresponding to complex terrain, it could be easier to estimate the phase noise. In this paper, phase noises rather than phase fringes are estimated first, and then they are subtracted from the noisy interferometric phase for denoising. The denoising convolutional neural network (DnCNN) is introduced to estimate phase noise and then a modified network called IPDnCNN is constructed for the problem. Based on the IPDnCNN, a novel interferometric phase noise reduction algorithm is proposed, which can reduce phase noise while protecting fringe edges and avoid the use of filter windows. Experimental results using simulated and real data are provided to demonstrate the effectiveness of the proposed method.
- 19 August 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 13 (19391404) , 4947-4959
Open AccessAn Interferometric Phase Noise Reduction Method Based on Modified Denoising Convolutional Neural Network
Traditional interferometric synthetic aperture radar (InSAR) denoising methods normally try to estimate the phase fringes directly from the noisy interferogram. Since the statistics of phase noise are more stable than the phase corresponding to complex terrain, it could be easier to estimate the phase noise. In this paper, phase noises rather than phase fringes are estimated first, and then they are subtracted from the noisy interferometric phase for denoising. The denoising convolutional neural network (DnCNN) is introduced to estimate phase noise and then a modified network called IPDnCNN is constructed for the problem. Based on the IPDnCNN, a novel interferometric phase noise reduction algorithm is proposed, which can reduce phase noise while protecting fringe edges and avoid the use of filter windows. Experimental results using simulated and real data are provided to demonstrate the effectiveness of the proposed method.
- 6 April 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Geoscience and Remote Sensing Letters
- Vol. 18 (2) , 301-305
Phase Inconsistency Error Compensation for Multichannel Spaceborne SAR Based on the Rotation-Invariant Property
The azimuth multichannel technique has been widely used in synthetic aperture radar (SAR) systems for improving the resolution and expanding the illumination area. However, due to phase inconsistency (PI) of different channels, the image quality deteriorates significantly, including resolution loss and appearance of ghost targets. In this letter, by exploiting the rotation-invariant property of the steering vector of the multichannel SAR signal, a PI error compensation method is proposed based on the estimation of signal parameters by rotation invariance technique (ESPRIT). Experimental results are presented using both simulated and real data to demonstrate the performance of the proposed method.
- 6 April 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Geoscience and Remote Sensing Letters
- Vol. 18 (2) , 301-305
Phase Inconsistency Error Compensation for Multichannel Spaceborne SAR Based on the Rotation-Invariant Property
The azimuth multichannel technique has been widely used in synthetic aperture radar (SAR) systems for improving the resolution and expanding the illumination area. However, due to phase inconsistency (PI) of different channels, the image quality deteriorates significantly, including resolution loss and appearance of ghost targets. In this letter, by exploiting the rotation-invariant property of the steering vector of the multichannel SAR signal, a PI error compensation method is proposed based on the estimation of signal parameters by rotation invariance technique (ESPRIT). Experimental results are presented using both simulated and real data to demonstrate the performance of the proposed method.