Won Il Ko
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Won Il Ko has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
Chang Je Park
Korea Atomic Energy Research Institute , Yuseong , Daejeon , Korea
1 shared publication- Eun-Ha Kwon
Korea Atomic Energy Research Institute, 150-1 Deokjin-dong, Youseong-gu, Daejeon 305-353, Republic of Korea
1 shared publication Fanxing Gao
Korea Atomic Energy Research Institute , Yuseong , Daejeon , Korea ; University of Science & Technology of Korea , Yuseong , Daejeon , Korea
1 shared publication- Fanxing Gao
Division of Nuclear Fuel Cycle Systems Analysis, Korea Atomic Energy Research Institute, Yuseong, Daejeon 305-353, Republic of Korea
1 shared publication Ho Hee Lee
Korea Atomic Energy Research Institute , Yuseong , Daejeon , Korea
1 shared publication- Hong Jang
Korea Atomic Energy Research Institute, Daejeon, Republic of Korea
1 shared publication
Latest Publications
- Open Access
National Options for a Sustainable Nuclear Energy System: MCDM Evaluation Using an Improved Integrated Weighting Approach
While the prospects look bright for nuclear energy development in China, no consensus about an optimum transitional path towards sustainability of the nuclear fuel cycle has been achieved. Herein, we present a preliminary study of decision making for China’s future nuclear energy systems, combined with a dynamic analysis model. In terms of sustainability assessment based on environmental, economic, and social considerations, we compared and ranked the four candidate options of nuclear fuel cycles combined with an integrated evaluation analysis using the Multi-Criteria Decision Making (MCDM) method. An improved integrated weighting method was first applied in the nuclear fuel cycle evaluation study. This method synthesizes diverse subjective/objective weighting methods to evaluate conflicting criteria among the competing decision makers at different levels of expertise and experience. The results suggest that the fuel cycle option of direct recycling of spent fuel through fast reactors is the most competitive candidate, while the fuel cycle option of direct disposal of all spent fuel without recycling is the least attractive for China, from a sustainability perspective. In summary, this study provided a well-informed decision-making tool to support the development of national nuclear energy strategies.
Open AccessNational Options for a Sustainable Nuclear Energy System: MCDM Evaluation Using an Improved Integrated Weighting Approach
While the prospects look bright for nuclear energy development in China, no consensus about an optimum transitional path towards sustainability of the nuclear fuel cycle has been achieved. Herein, we present a preliminary study of decision making for China’s future nuclear energy systems, combined with a dynamic analysis model. In terms of sustainability assessment based on environmental, economic, and social considerations, we compared and ranked the four candidate options of nuclear fuel cycles combined with an integrated evaluation analysis using the Multi-Criteria Decision Making (MCDM) method. An improved integrated weighting method was first applied in the nuclear fuel cycle evaluation study. This method synthesizes diverse subjective/objective weighting methods to evaluate conflicting criteria among the competing decision makers at different levels of expertise and experience. The results suggest that the fuel cycle option of direct recycling of spent fuel through fast reactors is the most competitive candidate, while the fuel cycle option of direct disposal of all spent fuel without recycling is the least attractive for China, from a sustainability perspective. In summary, this study provided a well-informed decision-making tool to support the development of national nuclear energy strategies.
- Open Access
Analysis of Unit Process Cost for an Engineering-Scale Pyroprocess Facility Using a Process Costing Method in Korea
Pyroprocessing, which is a dry recycling method, converts spent nuclear fuel into U (Uranium)/TRU (TRansUranium) metal ingots in a high-temperature molten salt phase. This paper provides the unit process cost of a pyroprocess facility that can process up to 10 tons of pyroprocessing product per year by utilizing the process costing method. Toward this end, the pyroprocess was classified into four kinds of unit processes: pretreatment, electrochemical reduction, electrorefining and electrowinning. The unit process cost was calculated by classifying the cost consumed at each process into raw material and conversion costs. The unit process costs of the pretreatment, electrochemical reduction, electrorefining and electrowinning were calculated as 195 US$/kgU-TRU, 310 US$/kgU-TRU, 215 US$/kgU-TRU and 231 US$/kgU-TRU, respectively. Finally the total pyroprocess cost was calculated as 951 US$/kgU-TRU. In addition, the cost driver for the raw material cost was identified as the cost for Li3PO4, needed for the LiCl-KCl purification process, and platinum as an anode electrode in the electrochemical reduction process.
Open AccessAnalysis of Unit Process Cost for an Engineering-Scale Pyroprocess Facility Using a Process Costing Method in Korea
Pyroprocessing, which is a dry recycling method, converts spent nuclear fuel into U (Uranium)/TRU (TRansUranium) metal ingots in a high-temperature molten salt phase. This paper provides the unit process cost of a pyroprocess facility that can process up to 10 tons of pyroprocessing product per year by utilizing the process costing method. Toward this end, the pyroprocess was classified into four kinds of unit processes: pretreatment, electrochemical reduction, electrorefining and electrowinning. The unit process cost was calculated by classifying the cost consumed at each process into raw material and conversion costs. The unit process costs of the pretreatment, electrochemical reduction, electrorefining and electrowinning were calculated as 195 US$/kgU-TRU, 310 US$/kgU-TRU, 215 US$/kgU-TRU and 231 US$/kgU-TRU, respectively. Finally the total pyroprocess cost was calculated as 951 US$/kgU-TRU. In addition, the cost driver for the raw material cost was identified as the cost for Li3PO4, needed for the LiCl-KCl purification process, and platinum as an anode electrode in the electrochemical reduction process.
- Open Access
- 15 April 2014
- Published by Taylor & Francis in Journal of Nuclear Science and Technology
- Vol. 51 (9) , 1141-1153
Dynamic assessments on high-level waste and low- and intermediate-level waste generation from open and closed nuclear fuel cycles in Republic of Korea
We estimated the generation of low- and intermediate-level waste (LILW) and high-level waste (HLW) from open and closed nuclear fuel cycles. The closed fuel cycle reflects the development and deployment of fast reactors and pyroprocessing from 2013 to 2100, while the open fuel cycle only considers pressurized water reactors. The closed fuel cycle hardly affects short-term spent fuel management but can save nearly 60% space of interim storage compared with the open fuel cycle. Compared with the open fuel cycle, the accumulated volume of HLW can be significantly reduced in the closed fuel cycle up to over 95% in 2100. For this volume reduction, high heat generating fission products should be separated from transuranic waste in pyroprocessing and stored in decay storages for a few hundred years. Mining and milling waste in the closed fuel cycle decreases by about 31%. In contrast, the closed fuel cycle generates 3.0%–4.5% more LILW than the open fuel cycle because fast reactors and pyroprocessing produce more LILW and conversion, enrichment, and fabrication produce less LILW. In the closed fuel cycle, operation and decommissioning wastes from reactor and pyroprocessing, respectively, contribute to 74% and 8% of LILW excluding mining and milling waste.
- 15 April 2014
- Published by Taylor & Francis in Journal of Nuclear Science and Technology
- Vol. 51 (9) , 1141-1153
Open AccessDynamic assessments on high-level waste and low- and intermediate-level waste generation from open and closed nuclear fuel cycles in Republic of Korea
We estimated the generation of low- and intermediate-level waste (LILW) and high-level waste (HLW) from open and closed nuclear fuel cycles. The closed fuel cycle reflects the development and deployment of fast reactors and pyroprocessing from 2013 to 2100, while the open fuel cycle only considers pressurized water reactors. The closed fuel cycle hardly affects short-term spent fuel management but can save nearly 60% space of interim storage compared with the open fuel cycle. Compared with the open fuel cycle, the accumulated volume of HLW can be significantly reduced in the closed fuel cycle up to over 95% in 2100. For this volume reduction, high heat generating fission products should be separated from transuranic waste in pyroprocessing and stored in decay storages for a few hundred years. Mining and milling waste in the closed fuel cycle decreases by about 31%. In contrast, the closed fuel cycle generates 3.0%–4.5% more LILW than the open fuel cycle because fast reactors and pyroprocessing produce more LILW and conversion, enrichment, and fabrication produce less LILW. In the closed fuel cycle, operation and decommissioning wastes from reactor and pyroprocessing, respectively, contribute to 74% and 8% of LILW excluding mining and milling waste.
- Open Access
- 1 January 2012
- Published by Hindawi Limited in Science and Technology of Nuclear Installations
- Vol. 2012, 1-10
Economic Analysis of Different Nuclear Fuel Cycle Options
An economic analysis has been performed to compare four nuclear fuel cycle options: a once-through cycle (OT), DUPIC recycling, thermal recycling using MOX fuel in a pressurized water reactor (PWR-MOX), and sodium fast reactor recycling employing pyroprocessing (Pyro-SFR). This comparison was made to suggest an economic competitive fuel cycle for the Republic of Korea. The fuel cycle cost (FCC) has been calculated based on the equilibrium material flows integrated with the unit cost of the fuel cycle components. The levelized fuel cycle costs (LFCC) have been derived in terms of mills/kWh for a fair comparison among the FCCs, and the results are as follows: OT 7.35 mills/kWh, DUPIC 9.06 mills/kWh, PUREX-MOX 8.94 mills/kWh, and Pyro-SFR 7.70 mills/kWh. Due to unavoidable uncertainties, a cost range has been applied to each unit cost, and an uncertainty study has been performed accordingly. A sensitivity analysis has also been carried out to obtain the break-even uranium price (215$/kgU) for the Pyro-SFR against the OT, which demonstrates that the deployment of the Pyro-SFR may be economical in the foreseeable future. The influence of pyrotechniques on the LFCC has also been studied to determine at which level the potential advantages of Pyro-SFR can be realized.
- 1 January 2012
- Published by Hindawi Limited in Science and Technology of Nuclear Installations
- Vol. 2012, 1-10
Open AccessEconomic Analysis of Different Nuclear Fuel Cycle Options
An economic analysis has been performed to compare four nuclear fuel cycle options: a once-through cycle (OT), DUPIC recycling, thermal recycling using MOX fuel in a pressurized water reactor (PWR-MOX), and sodium fast reactor recycling employing pyroprocessing (Pyro-SFR). This comparison was made to suggest an economic competitive fuel cycle for the Republic of Korea. The fuel cycle cost (FCC) has been calculated based on the equilibrium material flows integrated with the unit cost of the fuel cycle components. The levelized fuel cycle costs (LFCC) have been derived in terms of mills/kWh for a fair comparison among the FCCs, and the results are as follows: OT 7.35 mills/kWh, DUPIC 9.06 mills/kWh, PUREX-MOX 8.94 mills/kWh, and Pyro-SFR 7.70 mills/kWh. Due to unavoidable uncertainties, a cost range has been applied to each unit cost, and an uncertainty study has been performed accordingly. A sensitivity analysis has also been carried out to obtain the break-even uranium price (215$/kgU) for the Pyro-SFR against the OT, which demonstrates that the deployment of the Pyro-SFR may be economical in the foreseeable future. The influence of pyrotechniques on the LFCC has also been studied to determine at which level the potential advantages of Pyro-SFR can be realized.
- 1 January 2011
- Published by Taylor & Francis in Journal of Nuclear Science and Technology
- Vol. 48 (6) , 919-928
Criticality Safety Evaluation of Materials Concerning Pyroprocessing
Criticality evaluation of materials concerning pyroprocessing has been performed employing Monte Carlo techniques. Fresh UO2 fuel and spent PWR fuel have been employed in an electroreducer and, according to the pyroprocessing material flow, their metallic products are also evaluated correspondingly. TRU and Pu metals are evaluated concerning the electrowinner products. Totally, 6 kinds of reflectors and 4 stuffing materials are introduced to simulate the complexity during the pyroprocessing. With the optimized water intrusion models, certain subcritical data have been determined: 33.6 kg for UO2 fuel in electroreducer, 617.5 kg for spent fuel in electroreducer, 613.6 kg for metallic spent fuel in electroreducer, and 40.0 kg for U in electrorefiner. The conservative cases for electrowinner indicate the subcritical masses of 6.8 kg for Pu and 7.9 kg for TRU. However, with regard to the dilution effect of Cd, the Pu mass needed to reach the subcriticality changes from 11.1 kg with 1.2 kg of Cd to 500.0 kg with 2000.0 kg of Cd. The TRU mass needed to reach subcriticality changes from 13.0 kg with 1.4 kg Cd to 714.0 kg with 2856.0 kg of Cd. TSUNAMI has been employed to clarify the contributions of each nuclide quantitatively. The data obtained would therefore be used in the conceptual design study of pyroprocessing facilities.
- 1 January 2011
- Published by Taylor & Francis in Journal of Nuclear Science and Technology
- Vol. 48 (6) , 919-928
Criticality Safety Evaluation of Materials Concerning Pyroprocessing
Criticality evaluation of materials concerning pyroprocessing has been performed employing Monte Carlo techniques. Fresh UO2 fuel and spent PWR fuel have been employed in an electroreducer and, according to the pyroprocessing material flow, their metallic products are also evaluated correspondingly. TRU and Pu metals are evaluated concerning the electrowinner products. Totally, 6 kinds of reflectors and 4 stuffing materials are introduced to simulate the complexity during the pyroprocessing. With the optimized water intrusion models, certain subcritical data have been determined: 33.6 kg for UO2 fuel in electroreducer, 617.5 kg for spent fuel in electroreducer, 613.6 kg for metallic spent fuel in electroreducer, and 40.0 kg for U in electrorefiner. The conservative cases for electrowinner indicate the subcritical masses of 6.8 kg for Pu and 7.9 kg for TRU. However, with regard to the dilution effect of Cd, the Pu mass needed to reach the subcriticality changes from 11.1 kg with 1.2 kg of Cd to 500.0 kg with 2000.0 kg of Cd. The TRU mass needed to reach subcriticality changes from 13.0 kg with 1.4 kg Cd to 714.0 kg with 2856.0 kg of Cd. TSUNAMI has been employed to clarify the contributions of each nuclide quantitatively. The data obtained would therefore be used in the conceptual design study of pyroprocessing facilities.
- 1 September 2009
- Published by Elsevier in Energy Policy
- Vol. 37 (9) , 3484-3488
Implications of the new National Energy Basic Plan for nuclear waste management in Korea
- 1 September 2009
- Published by Elsevier in Energy Policy
- Vol. 37 (9) , 3484-3488
Implications of the new National Energy Basic Plan for nuclear waste management in Korea