Bogdanel Silvestru Munteanu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Bogdanel Silvestru Munteanu has a total of 43 co-authors. Here are the top co-authors by number of shared publications:
- Alexandru Cocean
Atmosphere Optics, Spectroscopy and Laser Laboratory (LOASL), Faculty of Physics, Alexandru Ioan Cuza University of Iasi, 11 Carol I Bld., 700506 Iasi, Romania
8 shared publications - Georgiana Cocean
Atmosphere Optics, Spectroscopy and Laser Laboratory (LOASL), Faculty of Physics, Alexandru Ioan Cuza University of Iasi, 11 Carol I Bld., 700506 Iasi, Romania
8 shared publications - Iuliana Cocean
Atmosphere Optics, Spectroscopy and Laser Laboratory (LOASL), Faculty of Physics, Alexandru Ioan Cuza University of Iasi, 11 Carol I Bld., 700506 Iasi, Romania
8 shared publications - Silviu Gurlui
Atmosphere Optics, Spectroscopy and Laser Laboratory (LOASL), Faculty of Physics, Alexandru Ioan Cuza University of Iasi, 11 Carol I Bld., 700506 Iasi, Romania
8 shared publications - Cristina Postolachi
Atmosphere Optics, Spectroscopy and Laser Laboratory (LOASL), Faculty of Physics, Alexandru Ioan Cuza University of Iasi, 11 Carol I Bld., 700506 Iasi, Romania
7 shared publications - Silvia Garofalide
Atmosphere Optics, Spectroscopy and Laser Laboratory (LOASL), Faculty of Physics, Alexandru Ioan Cuza University of Iasi, 11 Carol I Bld., 700506 Iasi, Romania
7 shared publications
Latest Publications
- Open Access
- 25 June 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (13) , 6387
Green Synthesis of Silver Nanoparticles by Using Various Reducing Agents
The experiments aimed at the green synthesis of silver nanoparticles (AgNPs) with various reducers like plant extracts and glucose and the evaluation of their antimicrobial efficiency versus their nanotoxicity. Precursor silver ions were reduced with extracts of Coffea arabica leaves, Thuja orientalis cones, and Cirsium arvense roots as well as with glucose. The AgNP microstructural properties were analyzed with transmission electron microscopy and dynamic light scattering that highlighted fine granulation (23 to 28 nm) and electrical stability (Zeta potential of −15 to −25 mV) while optical and spectral investigations like dark-field microscopy, UV-Vis spectroscopy and FTIR proved specific surface properties. Since cytotoxicity is related to the fate of AgNPs in the environment after their uses, we highlighted the presence of chromosomal alterations in the meristematic tissues of maize roots, such as delayed and expelled chromosomes, chromosome bridges, multi-polar anaphases, C-metaphases and others. Silver nanoparticle use in biomedical applications and antimicrobial activity against Gram-positive and Gram-negative pathogens was evidenced by the agar diffusion test, which suggested their usefulness in the case of possible antibiotic-resistant microbial strains with available natural ingredients and at low cost.
- 25 June 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (13) , 6387
Open AccessGreen Synthesis of Silver Nanoparticles by Using Various Reducing Agents
The experiments aimed at the green synthesis of silver nanoparticles (AgNPs) with various reducers like plant extracts and glucose and the evaluation of their antimicrobial efficiency versus their nanotoxicity. Precursor silver ions were reduced with extracts of Coffea arabica leaves, Thuja orientalis cones, and Cirsium arvense roots as well as with glucose. The AgNP microstructural properties were analyzed with transmission electron microscopy and dynamic light scattering that highlighted fine granulation (23 to 28 nm) and electrical stability (Zeta potential of −15 to −25 mV) while optical and spectral investigations like dark-field microscopy, UV-Vis spectroscopy and FTIR proved specific surface properties. Since cytotoxicity is related to the fate of AgNPs in the environment after their uses, we highlighted the presence of chromosomal alterations in the meristematic tissues of maize roots, such as delayed and expelled chromosomes, chromosome bridges, multi-polar anaphases, C-metaphases and others. Silver nanoparticle use in biomedical applications and antimicrobial activity against Gram-positive and Gram-negative pathogens was evidenced by the agar diffusion test, which suggested their usefulness in the case of possible antibiotic-resistant microbial strains with available natural ingredients and at low cost.
- Open Access
- 23 March 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (6) , 3085
Study on the Cytotoxicity of Silver Nanoparticles in the Ligninolytic Fungus Phanerochaete chrysosporium
Silver nanoparticles (AgNP), which have a wide range of applications in technical and biological fields, are produced in hundreds of tons annually and are eventually released into water, air, and soil. In this study, the effects of AgNPs on Phanerochaete chrysosporium, a white-rot fungus that plays a key role in wood waste degradation, were investigated. The AgNP were synthesized at high temperature with gallic acid under different pH conditions: near-neutral pH (~7.5), notation AgNP@GA-1, and alkaline pH (~10.5), notation AgNP@GA-2, focusing on their ability to cope with oxidative stress. The samples were characterized by fine granularity (particle diameter of 12 and 11 nm, respectively), specific plasmonic features (characteristic band at 425 and 408 nm), hydrodynamic diameter of 93 and 133 nm, respectively, and Zeta potential of −34 to −44 mV, which gave them stability over a period of three months. The fungal cultures exposed to AgNP concentrations of 40–100 µL/mL (approximately 4–11 µg/mL) presented superoxide dismutase (SOD) activity, which increased by approximately 45% at 40 µL/mL for AgNP@GA-1 after 7 days, whereas AgNP@GA-2 decreased SOD activity by up to 40% at 60 µL/mL. Both AgNP types strongly stimulated catalase (CAT) biosynthesis, with two- to three-fold increased activity on the 7th day at 100 µL/mL. CAT activity remained significantly elevated for AgNP@GA-1 on the 14th day at 60–80 µL/mL, whereas for AgNP@GA-2 it decreased by 40–60% compared with the control. Variations in malondialdehyde content indicated moderate lipid peroxidation, suggesting relatively low cytotoxic effects on fungal cells. Overall, the results demonstrate that P. chrysosporium exhibits adaptive biochemical responses to AgNP-induced oxidative stress while maintaining metabolic functionality, highlighting the potential compatibility of AgNPs with white-rot fungi involved in environmental wood waste biodegradation processes.
- 23 March 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (6) , 3085
Open AccessStudy on the Cytotoxicity of Silver Nanoparticles in the Ligninolytic Fungus Phanerochaete chrysosporium
Silver nanoparticles (AgNP), which have a wide range of applications in technical and biological fields, are produced in hundreds of tons annually and are eventually released into water, air, and soil. In this study, the effects of AgNPs on Phanerochaete chrysosporium, a white-rot fungus that plays a key role in wood waste degradation, were investigated. The AgNP were synthesized at high temperature with gallic acid under different pH conditions: near-neutral pH (~7.5), notation AgNP@GA-1, and alkaline pH (~10.5), notation AgNP@GA-2, focusing on their ability to cope with oxidative stress. The samples were characterized by fine granularity (particle diameter of 12 and 11 nm, respectively), specific plasmonic features (characteristic band at 425 and 408 nm), hydrodynamic diameter of 93 and 133 nm, respectively, and Zeta potential of −34 to −44 mV, which gave them stability over a period of three months. The fungal cultures exposed to AgNP concentrations of 40–100 µL/mL (approximately 4–11 µg/mL) presented superoxide dismutase (SOD) activity, which increased by approximately 45% at 40 µL/mL for AgNP@GA-1 after 7 days, whereas AgNP@GA-2 decreased SOD activity by up to 40% at 60 µL/mL. Both AgNP types strongly stimulated catalase (CAT) biosynthesis, with two- to three-fold increased activity on the 7th day at 100 µL/mL. CAT activity remained significantly elevated for AgNP@GA-1 on the 14th day at 60–80 µL/mL, whereas for AgNP@GA-2 it decreased by 40–60% compared with the control. Variations in malondialdehyde content indicated moderate lipid peroxidation, suggesting relatively low cytotoxic effects on fungal cells. Overall, the results demonstrate that P. chrysosporium exhibits adaptive biochemical responses to AgNP-induced oxidative stress while maintaining metabolic functionality, highlighting the potential compatibility of AgNPs with white-rot fungi involved in environmental wood waste biodegradation processes.
- Open Access
- 19 June 2024
- Published by MDPI AG in Quantum Beam Science
- Vol. 8 (2) , 16
High Energy Pulsed Laser Beam to Produce a Thin Layer of Crystalline Silver without Heating the Deposition Substrate and Its Catalytic Effects
Crystalline silver thin layers were obtained using high-energy pulsed laser ablation without the heating of the deposition substrate. The fluid Plateau–Rayleigh (PRI), Rayleigh–Taylor (RTI), and Richtmyer–Meshkov (RMI) instabilities, as well as the crown splash induced during the pulsed laser deposition (PLD) in the high energy regime, resulting in ring and pearl-shaped structures, offer the benefit of an increased sorption surface. These morphological structures obtained for the silver thin layers make them of interest for catalytic applications. This study addresses both fundamental and applied issues on the morphological structures obtained for the silver thin layers and their catalytic function in organic processes. In this sense, the catalytic action of the thin silver layer was highlighted by modifications of the Reactive Blue 21 dye (C.I.) in an aqueous solution with sodium bicarbonate. Specific investigations and analyses were carried out using electron microscopy and elemental analysis (SEM-EDX), atomic force microscopy (AFM) and profilometry, mass spectrometry, ablation plasma diagnosis, diffractograms (XRD), as well as IR spectroscopy (FTIR). In addition to the experimental investigation and analyses, the simulation of the ionization energy threshold was conducted in COMSOL for complementary evaluation on the involved processes and phenomena.
- 19 June 2024
- Published by MDPI AG in Quantum Beam Science
- Vol. 8 (2) , 16
Open AccessHigh Energy Pulsed Laser Beam to Produce a Thin Layer of Crystalline Silver without Heating the Deposition Substrate and Its Catalytic Effects
Crystalline silver thin layers were obtained using high-energy pulsed laser ablation without the heating of the deposition substrate. The fluid Plateau–Rayleigh (PRI), Rayleigh–Taylor (RTI), and Richtmyer–Meshkov (RMI) instabilities, as well as the crown splash induced during the pulsed laser deposition (PLD) in the high energy regime, resulting in ring and pearl-shaped structures, offer the benefit of an increased sorption surface. These morphological structures obtained for the silver thin layers make them of interest for catalytic applications. This study addresses both fundamental and applied issues on the morphological structures obtained for the silver thin layers and their catalytic function in organic processes. In this sense, the catalytic action of the thin silver layer was highlighted by modifications of the Reactive Blue 21 dye (C.I.) in an aqueous solution with sodium bicarbonate. Specific investigations and analyses were carried out using electron microscopy and elemental analysis (SEM-EDX), atomic force microscopy (AFM) and profilometry, mass spectrometry, ablation plasma diagnosis, diffractograms (XRD), as well as IR spectroscopy (FTIR). In addition to the experimental investigation and analyses, the simulation of the ionization energy threshold was conducted in COMSOL for complementary evaluation on the involved processes and phenomena.
- Open Access
- 28 March 2024
- Published by MDPI AG in Preprints.org
High Energy Pulsed Laser Beam to Produce a Thin Layer of Crystalline Silver without Heating the Deposition Substrate and Its Catalytic Effects
Crystalline silver thin layers were obtained by high-energy pulsed laser ablation without heating of the deposition substrate. The fluid Plateau-Rayleigh (PRI), Rayleigh – Taylor (RTI) and Richtmyer – Meshkov (RMI) instabilities, as well as crown splash induced during pulsed laser deposition (PLD) in high energy regime, resulting in ring and pearl shaped structures, offer the benefit of increased sorption surface. These morphological structures obtained for the silver thin layers make them of interest for catalytic applications. The study presented with this work addresses both the fundamental and applied issues on the morphological structures obtained for the silver thin layer and their catalytic function in organic processes. In this sense, the catalytic action of the thin silver layer was highlighted by modifications of the Reactive Blue 21 dye (C.I.) in aqueous solution with sodium bicarbonate. Specific investigations and analyzes were carried out by electron microscopy and elemental analysis (SEM-EDX), atomic force microscopy (AFM) and profilometry, mass spectrometry, ablation plasma diagnosis, diffractograms (XRD), as well as IR spectroscopy (FTIR). In addition to the experimental investigation and analyzes, simulation of the ionization energy threshold was conducted in COMSOL for complementary evaluation on the involved processes and phenomena.
- 28 March 2024
- Published by MDPI AG in Preprints.org
Open AccessHigh Energy Pulsed Laser Beam to Produce a Thin Layer of Crystalline Silver without Heating the Deposition Substrate and Its Catalytic Effects
Crystalline silver thin layers were obtained by high-energy pulsed laser ablation without heating of the deposition substrate. The fluid Plateau-Rayleigh (PRI), Rayleigh – Taylor (RTI) and Richtmyer – Meshkov (RMI) instabilities, as well as crown splash induced during pulsed laser deposition (PLD) in high energy regime, resulting in ring and pearl shaped structures, offer the benefit of increased sorption surface. These morphological structures obtained for the silver thin layers make them of interest for catalytic applications. The study presented with this work addresses both the fundamental and applied issues on the morphological structures obtained for the silver thin layer and their catalytic function in organic processes. In this sense, the catalytic action of the thin silver layer was highlighted by modifications of the Reactive Blue 21 dye (C.I.) in aqueous solution with sodium bicarbonate. Specific investigations and analyzes were carried out by electron microscopy and elemental analysis (SEM-EDX), atomic force microscopy (AFM) and profilometry, mass spectrometry, ablation plasma diagnosis, diffractograms (XRD), as well as IR spectroscopy (FTIR). In addition to the experimental investigation and analyzes, simulation of the ionization energy threshold was conducted in COMSOL for complementary evaluation on the involved processes and phenomena.
- Open Access
Dual-Pulsed Laser Ablation of Oyster Shell Producing Novel Thin Layers Deposed to Saccharomyces cerevisiae
Dual-pulsed (DPL) laser deposition using oyster shells as targets was studied in order to find out if this method can replace the use of high-power pulsed lasers. Aspects related to changes in the morphological structure of the thin layer but also to the chemical composition of the obtained thin layer were analyzed and compared with the target as well as with the thin layers obtained with a higher power pulsed laser in a single-pulsed (SPL) regime. Orthorhombic structures were noticed with Scanning Electron Microscopy for the thin film obtained in DPL mode compared to the irregular particles obtained in SPL mode. The deacetylation process during ablation was evidenced by Fourier Transform Infrared spectroscopy, resulting in chitosan-based thin films. The effect of the obtained thin films of chitosan on the cells of baker’s yeast (Saccharomyces cerevisiae) was studied. Restoration of the yeast paste into initial yeast was noticed mainly when the hemp fabric was used as support for the coating with yeas which was after that coated with chitosan thin film produced by DPL method.
Open AccessDual-Pulsed Laser Ablation of Oyster Shell Producing Novel Thin Layers Deposed to Saccharomyces cerevisiae
Dual-pulsed (DPL) laser deposition using oyster shells as targets was studied in order to find out if this method can replace the use of high-power pulsed lasers. Aspects related to changes in the morphological structure of the thin layer but also to the chemical composition of the obtained thin layer were analyzed and compared with the target as well as with the thin layers obtained with a higher power pulsed laser in a single-pulsed (SPL) regime. Orthorhombic structures were noticed with Scanning Electron Microscopy for the thin film obtained in DPL mode compared to the irregular particles obtained in SPL mode. The deacetylation process during ablation was evidenced by Fourier Transform Infrared spectroscopy, resulting in chitosan-based thin films. The effect of the obtained thin films of chitosan on the cells of baker’s yeast (Saccharomyces cerevisiae) was studied. Restoration of the yeast paste into initial yeast was noticed mainly when the hemp fabric was used as support for the coating with yeas which was after that coated with chitosan thin film produced by DPL method.
- Open Access
- 7 March 2023
- Published by MDPI AG in International Journal of Environmental Research and Public Health
- Vol. 20 (6) , 4715
Urban Exotic Pollution: The Harmful Environmental Footprint for Health and Historical Architecture
The study in this paper was carried out as a result of the observation of pollution phenomena and foaming effects associated with anthropogenic activities, including street cleaning activity. The processes of dust binding used in order to reduce PM10 and PM 2.5 pollution has been proven to be inefficient, and even contributing to pollution with particulate matter. Our results suggest that the use of dust binders must be integrated in a technique that includes methods of removing agglomerated particle structures resulting from the process of coagulation or flocculation. These are the conclusions of the investigations carried out by spectroscopic methods (FTIR, SEM-EDX) on samples collected from the streets of Iasi on 10 March 2021, and on samples collected from the surface of the Precinct Wall of the historical monument Golia—Iasi Monastery Ensemble (Romania). On the later samples, coloristic analysis was also performed. The alert for investigation was given by the foaming waters that were leaking on the streets. The phenomenon was observed after the streets had been washed by specialized vehicles. Analyses revealed compounds used as dust binders and coagulant type (aluminum sulfate, sodium aluminate and their derivatives, plus anti-skid chemicals such as calcium chlorine and magnesium chlorine), as well as organic compounds included in aggregate type structures, and they showed contamination of the Golia Precinct Wall. The results show that the dust binders or coagulants used as such, or embedded in various products intended for the cleaning process of streets or other outdoor public places, must be subject to regulation. Otherwise, there is a risk of adding more pollutants during an operation with the opposite purpose. The migration of these pollutants on the studied building offers an image on how both our health and all constructions and equipment exposed in the open air are affected.
- 7 March 2023
- Published by MDPI AG in International Journal of Environmental Research and Public Health
- Vol. 20 (6) , 4715
Open AccessUrban Exotic Pollution: The Harmful Environmental Footprint for Health and Historical Architecture
The study in this paper was carried out as a result of the observation of pollution phenomena and foaming effects associated with anthropogenic activities, including street cleaning activity. The processes of dust binding used in order to reduce PM10 and PM 2.5 pollution has been proven to be inefficient, and even contributing to pollution with particulate matter. Our results suggest that the use of dust binders must be integrated in a technique that includes methods of removing agglomerated particle structures resulting from the process of coagulation or flocculation. These are the conclusions of the investigations carried out by spectroscopic methods (FTIR, SEM-EDX) on samples collected from the streets of Iasi on 10 March 2021, and on samples collected from the surface of the Precinct Wall of the historical monument Golia—Iasi Monastery Ensemble (Romania). On the later samples, coloristic analysis was also performed. The alert for investigation was given by the foaming waters that were leaking on the streets. The phenomenon was observed after the streets had been washed by specialized vehicles. Analyses revealed compounds used as dust binders and coagulant type (aluminum sulfate, sodium aluminate and their derivatives, plus anti-skid chemicals such as calcium chlorine and magnesium chlorine), as well as organic compounds included in aggregate type structures, and they showed contamination of the Golia Precinct Wall. The results show that the dust binders or coagulants used as such, or embedded in various products intended for the cleaning process of streets or other outdoor public places, must be subject to regulation. Otherwise, there is a risk of adding more pollutants during an operation with the opposite purpose. The migration of these pollutants on the studied building offers an image on how both our health and all constructions and equipment exposed in the open air are affected.
- Open Access
- 15 February 2023
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 24 (4) , 3892
Nano-Biocomposite Materials Obtained from Laser Ablation of Hemp Stalks for Medical Applications and Potential Component in New Solar Cells
The study in this paper presents a new material that was produced as a thin film by the Pulsed Laser Deposition technique (PLD) using a 532 nm wavelength and 150 mJ/pulse laser beam on the hemp stalk as target. The analyses performed by spectroscopic techniques (Fourier Transform Infrared Spectroscopy—FTIR, Laser—Induced Fluorescence Spectroscopy—LIF, Scanning Electron Microscopy coupled with Energy Dispersive X-ray—SEM-EDX, Atomic Force Microscopy—AFM and optical microscope) evidenced that a biocomposite consisting of lignin, cellulose, hemicellulose, waxes, sugars and phenolyc acids p-coumaric and ferulic, similar to the hemp stalk target was obtained. Nanostructures and aggregated nanostructures of 100 nm to 1.5 μm size were evidenced. Good mechanical strength and its adherence to the substrate were also noticed. It was noticed that the content in calcium and magnesium increased compared to that of the target from 1.5% to 2.2% and from 0.2% to 1.2%, respectively. The COMSOL numerical simulation provided information on the thermal conditions that explain phenomena and processes during laser ablation such as C-C pyrolisis and enhanced deposition of calcium in the lignin polymer matrix. The good gas and water sorption properties due to the free OH groups and to the microporous structure of the new biocomposite components recommends it for studies for functional applications in medicine for drug delivery devices, filters in dialysis and for gas and liquid sensors. Functional applications in solar cells windows are also possible due to the conjugated structures of the contained polymers.
- 15 February 2023
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 24 (4) , 3892
Open AccessNano-Biocomposite Materials Obtained from Laser Ablation of Hemp Stalks for Medical Applications and Potential Component in New Solar Cells
The study in this paper presents a new material that was produced as a thin film by the Pulsed Laser Deposition technique (PLD) using a 532 nm wavelength and 150 mJ/pulse laser beam on the hemp stalk as target. The analyses performed by spectroscopic techniques (Fourier Transform Infrared Spectroscopy—FTIR, Laser—Induced Fluorescence Spectroscopy—LIF, Scanning Electron Microscopy coupled with Energy Dispersive X-ray—SEM-EDX, Atomic Force Microscopy—AFM and optical microscope) evidenced that a biocomposite consisting of lignin, cellulose, hemicellulose, waxes, sugars and phenolyc acids p-coumaric and ferulic, similar to the hemp stalk target was obtained. Nanostructures and aggregated nanostructures of 100 nm to 1.5 μm size were evidenced. Good mechanical strength and its adherence to the substrate were also noticed. It was noticed that the content in calcium and magnesium increased compared to that of the target from 1.5% to 2.2% and from 0.2% to 1.2%, respectively. The COMSOL numerical simulation provided information on the thermal conditions that explain phenomena and processes during laser ablation such as C-C pyrolisis and enhanced deposition of calcium in the lignin polymer matrix. The good gas and water sorption properties due to the free OH groups and to the microporous structure of the new biocomposite components recommends it for studies for functional applications in medicine for drug delivery devices, filters in dialysis and for gas and liquid sensors. Functional applications in solar cells windows are also possible due to the conjugated structures of the contained polymers.
- Open Access
High-Power Laser Deposition of Chitosan Polymers: Medical and Environmental Applications
High-power laser irradiation interaction with natural polymers in biocomposites and Laser-Induced Chitin Deacetylation (LICD) was studied in this work, in order to produce thin films consisting of chitosan composite. The new method can lead to a cutting-edge technology, as a response to the concern regarding the accumulation of “natural biological waste” and its use. The process consists of high-power laser irradiation applied on oyster shells as the target and deposition of the ablated material on different substrates. The obtained thin films we analyzed by FTIR, UV-VIS and LIF spectroscopy, as well as SEM-EDS and AFM. All the results indicated that chitin was extracted from the shell composite material and converted to chitosan by deacetylation. It was, thus, evidenced that chemical transformation in the chitin polymer side-chain occurs during laser irradiation of the oyster shell and in the resulted plasma plume of ablation. The numerical simulation in COMSOL performed for this study anticipates and confirms the experimental results of chitin deacetylation, also providing information about the conditions required for the physico-chemical processes involved. The high sorption properties of the thin films obtained by a LICD procedure is evidenced in the study. This quality suggests that they should be used in transdermal patch construction due to the known hemostatic and antibacterial effects of chitosan. The resulting composite materials, consisting of the chitosan thin films deposited on hemp fabric, are also suitable for micro-filters in water decontamination or in other filtering processes.
Open AccessHigh-Power Laser Deposition of Chitosan Polymers: Medical and Environmental Applications
High-power laser irradiation interaction with natural polymers in biocomposites and Laser-Induced Chitin Deacetylation (LICD) was studied in this work, in order to produce thin films consisting of chitosan composite. The new method can lead to a cutting-edge technology, as a response to the concern regarding the accumulation of “natural biological waste” and its use. The process consists of high-power laser irradiation applied on oyster shells as the target and deposition of the ablated material on different substrates. The obtained thin films we analyzed by FTIR, UV-VIS and LIF spectroscopy, as well as SEM-EDS and AFM. All the results indicated that chitin was extracted from the shell composite material and converted to chitosan by deacetylation. It was, thus, evidenced that chemical transformation in the chitin polymer side-chain occurs during laser irradiation of the oyster shell and in the resulted plasma plume of ablation. The numerical simulation in COMSOL performed for this study anticipates and confirms the experimental results of chitin deacetylation, also providing information about the conditions required for the physico-chemical processes involved. The high sorption properties of the thin films obtained by a LICD procedure is evidenced in the study. This quality suggests that they should be used in transdermal patch construction due to the known hemostatic and antibacterial effects of chitosan. The resulting composite materials, consisting of the chitosan thin films deposited on hemp fabric, are also suitable for micro-filters in water decontamination or in other filtering processes.
- Open Access
- 18 March 2022
- Published by MDPI AG in Atmosphere
- Vol. 13 (3) , 493
Saharan Dust Storm Aerosol Characterization of the Event (9 to 13 May 2020) over European AERONET Sites
This research was aimed at investigating the Saharan dust cloud recorded on 11 and 12 May 2020, by AERONET AOD stations in Italy, Austria, Slovakia, Poland, Ukraine, and Romania and determining whether it affected the area of the Republic of Moldova. During this period, the Chisinau AERONET monitoring site was not operational. The incentive for the investigation was the discovery of a high sediment load in rainwater collected on 12 May 2020 in Pelinia, a village in the Dochia district of the Republic of Moldova, in the southeastern part of Europe (47.8780 latitude, 27.8344 longitude), which could have originated from the Saharan dust storm. Backward trajectory analysis with NOAA’s HYSPLIT model confirmed that the Saharan dust storm impacted the village of Pelinia. Scanning electron microscopy coupled with electron dispersive X-ray spectroscopy (SEM-EDS) and Fourier transform infrared spectroscopy (FTIR) analysis of Pelinia rainwater sediments confirmed the chemical composition and morphological structure of Saharan dust particles. The particle size of the sediments matched the measurements at the AOD stations at Timisoara and Magurele, supporting the suggestion that Saharan dust probably entered the Republic of Moldova from Romania. FTIR analysis identified chemical compounds such as carbon dioxide, carbonates, sulfates, ferrocyanides, and organics (amines, amides, polypeptides, imines, oximes, pyrroles, aldehydes, sulfoxides, sulfones, nitro-derivatives) that were adsorbed and/or absorbed from the atmosphere, consistent with Saharan dust aerosols. Bio-allergens such as pollen were detected in the SEM images, showing the role of Saharan dust in transporting and spreading this kind of biological material. This study highlights the risk of Saharan dust clouds to humans, animals, and plants, but also its potential benefits for agriculture when suitable conditions are met in this regard.
- 18 March 2022
- Published by MDPI AG in Atmosphere
- Vol. 13 (3) , 493
Open AccessSaharan Dust Storm Aerosol Characterization of the Event (9 to 13 May 2020) over European AERONET Sites
This research was aimed at investigating the Saharan dust cloud recorded on 11 and 12 May 2020, by AERONET AOD stations in Italy, Austria, Slovakia, Poland, Ukraine, and Romania and determining whether it affected the area of the Republic of Moldova. During this period, the Chisinau AERONET monitoring site was not operational. The incentive for the investigation was the discovery of a high sediment load in rainwater collected on 12 May 2020 in Pelinia, a village in the Dochia district of the Republic of Moldova, in the southeastern part of Europe (47.8780 latitude, 27.8344 longitude), which could have originated from the Saharan dust storm. Backward trajectory analysis with NOAA’s HYSPLIT model confirmed that the Saharan dust storm impacted the village of Pelinia. Scanning electron microscopy coupled with electron dispersive X-ray spectroscopy (SEM-EDS) and Fourier transform infrared spectroscopy (FTIR) analysis of Pelinia rainwater sediments confirmed the chemical composition and morphological structure of Saharan dust particles. The particle size of the sediments matched the measurements at the AOD stations at Timisoara and Magurele, supporting the suggestion that Saharan dust probably entered the Republic of Moldova from Romania. FTIR analysis identified chemical compounds such as carbon dioxide, carbonates, sulfates, ferrocyanides, and organics (amines, amides, polypeptides, imines, oximes, pyrroles, aldehydes, sulfoxides, sulfones, nitro-derivatives) that were adsorbed and/or absorbed from the atmosphere, consistent with Saharan dust aerosols. Bio-allergens such as pollen were detected in the SEM images, showing the role of Saharan dust in transporting and spreading this kind of biological material. This study highlights the risk of Saharan dust clouds to humans, animals, and plants, but also its potential benefits for agriculture when suitable conditions are met in this regard.
- Open Access
- 19 January 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (3) , 983
The Origin and Physico-Chemical Properties of Some Unusual Earth Rock Fragments
In this paper, several researches were undertaken related to a violent phenomenon, characterized by a sonic boom, felt on an area of at least 500 km2, shortly followed by the fall of rock fragments that were then recovered from the ground. These presented different appearance characteristics from those of the materials and rocks specific to the respective area. Spectroscopic and petrographic analyses were performed to identify the composition, morphological and crystallinity characteristics in order to elucidate the nature of the collected rock samples. Using FTIR spectroscopy functional groups, as those reported in the literature for Murchison, Bells and Allende, carbonaceous chondrite meteorites were identified. The fragments evidenced topography and morphology that can be assigned to the chondrules and chondrites of carbonaceous meteorites (CMs). The material in the fragments proved to be as insoluble organic material (IOM), being insoluble in water and organic solvents. Its crystalline structure was also evidenced by XRD analysis and FTIR spectrum. These physico-chemical properties, in relation to the sonic boom perceived in the area from where they were collected, indicate the spatial origin of the fragments of rock as possible meteorite fragments.
- 19 January 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (3) , 983
Open AccessThe Origin and Physico-Chemical Properties of Some Unusual Earth Rock Fragments
In this paper, several researches were undertaken related to a violent phenomenon, characterized by a sonic boom, felt on an area of at least 500 km2, shortly followed by the fall of rock fragments that were then recovered from the ground. These presented different appearance characteristics from those of the materials and rocks specific to the respective area. Spectroscopic and petrographic analyses were performed to identify the composition, morphological and crystallinity characteristics in order to elucidate the nature of the collected rock samples. Using FTIR spectroscopy functional groups, as those reported in the literature for Murchison, Bells and Allende, carbonaceous chondrite meteorites were identified. The fragments evidenced topography and morphology that can be assigned to the chondrules and chondrites of carbonaceous meteorites (CMs). The material in the fragments proved to be as insoluble organic material (IOM), being insoluble in water and organic solvents. Its crystalline structure was also evidenced by XRD analysis and FTIR spectrum. These physico-chemical properties, in relation to the sonic boom perceived in the area from where they were collected, indicate the spatial origin of the fragments of rock as possible meteorite fragments.