Quoc-Huy Ngo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Quoc-Huy Ngo has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
- Van-Du Nguyen
Thai Nguyen University of Technology, Thai nguyen, Vietnam
8 shared publications - Ky-Thanh Ho
Faculty of Mechanical Engineering, Thai Nguyen University of Technology, Thai Nguyen 250000, Vietnam
6 shared publications - Ngoc-Hung Chu
Faculty of International Training, Thai Nguyen University of Technology, 3/2 street, Tichluong ward, Thainguyen City 251750, Vietnam
4 shared publications Van-Dam Vu
3 shared publications- Ngoc-Tuan La
Faculty of Mechanical Engineering, Vinh University of Technology Education, Vinh 430000, Vietnam
2 shared publications - Tien-Dat Hoang
School of Mechanical and Automotive Engineering, Hanoi University of Industry, Hanoi Vietnam
2 shared publications
Latest Publications
- 1 January 2026
- Published by International Digital Organization for Scientific Information (IDOSI) in International Journal of Engineering
- Vol. 39 (11) , 2930-2948
Applying TOPSIS Method for Selecting Millimeter-scale Vibro-impact Capsule Robot Design Configuration to Ensure Working Efficiency, Battery Saving and Size Reduction
- 1 January 2026
- Published by International Digital Organization for Scientific Information (IDOSI) in International Journal of Engineering
- Vol. 39 (11) , 2930-2948
Applying TOPSIS Method for Selecting Millimeter-scale Vibro-impact Capsule Robot Design Configuration to Ensure Working Efficiency, Battery Saving and Size Reduction
- 12 April 2025
- Published by Thai Nguyen University in TNU Journal of Science and Technology
- Vol. 230 (06) , 245-253
ANALYSIS OF THE DYNAMIC BEHAVIOR OF CAPSULE ROBOT WHEN CHANGING THE IMPACT GAP OF THE VIBRATOR
Khoảng cách va đập là thông số kết cấu quan trọng của bộ tạo rung trong thiết bị tự di chuyển dạng viên nang. Thông số này cần được thiết lập trước khi đóng gói robot viên nang. Bài báo này trình bày các kết quả mô phỏng số đánh giá sự ảnh hưởng của khoảng cách khe hở va đập đến ứng xử động lực học của capsubot. Các kỹ thuật phân tích về đồ thị thời gian, bản đồ tiến trình, đồ thị pha, bản đồ Poincaré và đồ thị rẽ nhánh được sử dụng để đánh giá tính ổn định của hệ thống. Kết quả phân tích giúp người thiết kế có căn cứ kỹ thuật để lựa chọn khoảng cách khe hở va đập phù hợp với yêu cầu hoạt động của viên nang. Các kết quả này có thể được sử dụng để tối ưu hóa các biến điều khiển và tham số thiết kế, làm tiền đề xây dựng hệ thống thực nghiệm nhằm kiểm chứng và đánh giá ứng xử động học của hệ thống capubot thực. Cách tiếp cận này cũng sẽ giúp giảm thời gian và tiết kiệm chi phí thiết kế, chế tạo mô hình thử nghiệm khi phát triển viên nang chủ động, điều khiển được.
- 12 April 2025
- Published by Thai Nguyen University in TNU Journal of Science and Technology
- Vol. 230 (06) , 245-253
ANALYSIS OF THE DYNAMIC BEHAVIOR OF CAPSULE ROBOT WHEN CHANGING THE IMPACT GAP OF THE VIBRATOR
Khoảng cách va đập là thông số kết cấu quan trọng của bộ tạo rung trong thiết bị tự di chuyển dạng viên nang. Thông số này cần được thiết lập trước khi đóng gói robot viên nang. Bài báo này trình bày các kết quả mô phỏng số đánh giá sự ảnh hưởng của khoảng cách khe hở va đập đến ứng xử động lực học của capsubot. Các kỹ thuật phân tích về đồ thị thời gian, bản đồ tiến trình, đồ thị pha, bản đồ Poincaré và đồ thị rẽ nhánh được sử dụng để đánh giá tính ổn định của hệ thống. Kết quả phân tích giúp người thiết kế có căn cứ kỹ thuật để lựa chọn khoảng cách khe hở va đập phù hợp với yêu cầu hoạt động của viên nang. Các kết quả này có thể được sử dụng để tối ưu hóa các biến điều khiển và tham số thiết kế, làm tiền đề xây dựng hệ thống thực nghiệm nhằm kiểm chứng và đánh giá ứng xử động học của hệ thống capubot thực. Cách tiếp cận này cũng sẽ giúp giảm thời gian và tiết kiệm chi phí thiết kế, chế tạo mô hình thử nghiệm khi phát triển viên nang chủ động, điều khiển được.
- 20 September 2024
- Published by Elsevier in Journal of Sound and Vibration
- Vol. 596
A vibro-impact remote-controlled capsule in millimeter scale: Design, modeling, experimental validation and dynamic response
- 20 September 2024
- Published by Elsevier in Journal of Sound and Vibration
- Vol. 596
A vibro-impact remote-controlled capsule in millimeter scale: Design, modeling, experimental validation and dynamic response
- Open Access
Optimization of Ultrasonic-Assisted Incremental Sheet Forming
Implementing the ultrasonic vibration-assisted incremental sheet-forming (UISF) process has been proven to significantly reduce the forming force, improve the surface quality, and enhance the accuracy of the sheet-forming process. However, such effectiveness has primarily focused on easily deformable materials (such as AA1050 and AA1060 aluminum alloys) and small step-down sizes (from 0.3 mm to 0.5 mm). To further enhance the process, it is crucial to study larger step-down sizes and harder materials. In this study, a series of UISF experiments were conducted, with step-down sizes ranging from 0.5 mm to 1.5 mm and feed rates ranging from 200 mm/min to 1200 mm/min. The influence of ultrasonic vibration on the effectiveness of force reduction and the optimal operation parameters was experimentally tested. Forming aluminum alloy AA5052, a difficult-to-deform material with two thicknesses of 0.5 mm and 1.0 mm, indicates that the axial force Fz and the tool movement resistance force Fy tend to decrease significantly with ultrasonic vibration assistance. Optimal equations for force reduction Fz and Fy have been developed for plate thickness based on the step-down size and feed rate. The optimal results show that for 1.0 mm thickness, reductions in Fz and Fy can reach 58.73% and 69.17%, respectively, and that of 64.17% and 71.98%, respectively, for 0.5 mm thickness.
Open AccessOptimization of Ultrasonic-Assisted Incremental Sheet Forming
Implementing the ultrasonic vibration-assisted incremental sheet-forming (UISF) process has been proven to significantly reduce the forming force, improve the surface quality, and enhance the accuracy of the sheet-forming process. However, such effectiveness has primarily focused on easily deformable materials (such as AA1050 and AA1060 aluminum alloys) and small step-down sizes (from 0.3 mm to 0.5 mm). To further enhance the process, it is crucial to study larger step-down sizes and harder materials. In this study, a series of UISF experiments were conducted, with step-down sizes ranging from 0.5 mm to 1.5 mm and feed rates ranging from 200 mm/min to 1200 mm/min. The influence of ultrasonic vibration on the effectiveness of force reduction and the optimal operation parameters was experimentally tested. Forming aluminum alloy AA5052, a difficult-to-deform material with two thicknesses of 0.5 mm and 1.0 mm, indicates that the axial force Fz and the tool movement resistance force Fy tend to decrease significantly with ultrasonic vibration assistance. Optimal equations for force reduction Fz and Fy have been developed for plate thickness based on the step-down size and feed rate. The optimal results show that for 1.0 mm thickness, reductions in Fz and Fy can reach 58.73% and 69.17%, respectively, and that of 64.17% and 71.98%, respectively, for 0.5 mm thickness.
- 13 December 2023
- Published by Springer Nature
- p. 253-260
Dynamic Analysis of Capsubot Model in Liquid Environment by Numerical Method
- 13 December 2023
- Published by Springer Nature
- p. 253-260
Dynamic Analysis of Capsubot Model in Liquid Environment by Numerical Method
- 8 April 2021
- Published by Springer Nature in Meccanica
- Vol. 56 (8) , 2121-2137
The effect of friction on the vibro-impact locomotion system: modeling and dynamic response
- 8 April 2021
- Published by Springer Nature in Meccanica
- Vol. 56 (8) , 2121-2137
The effect of friction on the vibro-impact locomotion system: modeling and dynamic response
- 1 March 2020
- Published by Elsevier in Biosystems Engineering
- Vol. 191, 107-115
Multi-objective optimisation of cutting force and cutting power in chopping agricultural residues
- 1 March 2020
- Published by Elsevier in Biosystems Engineering
- Vol. 191, 107-115
Multi-objective optimisation of cutting force and cutting power in chopping agricultural residues
- Open Access
- 25 February 2020
- Published by MDPI AG in Agriculture
- Vol. 10 (3) , 51
Multiresponse Optimization of Cutting Force and Cutting Power in Chopping Agricultural Residues Using Grey-Based Taguchi Method
Agricultural residues are the most abundant biomass and forage resources. Chopping is a precondition for either use, and reducing the shearing force has been considered as one of the most effective way to save energy. A smaller force can also permit more compact mechanical parts of chopping devices. In several cases, power consumption may be large, even when the shearing force is small, if the corresponding cutting velocity is high. Consequently, it is important to minimize both cutting force and power consumption simultaneously. This paper presents a practical approach to solve the multi-objective optimization problem for chopping processes of corn stalks. Applying the Taguchi design of experiments, a plan of 27 chopping tests was conducted. Based on the grey relational grade analysis and analysis of variance technique, optimum levels as well as the percentage contribution of such parameters were identified. Experimental results showed that the multi-response optimization problem in chopping corn stalks can be effectively addressed through the combination of Taguchi design and grey relational analysis. The results can be expanded for practical applications in design and operation of chopping machines for agricultural residues.
- 25 February 2020
- Published by MDPI AG in Agriculture
- Vol. 10 (3) , 51
Open AccessMultiresponse Optimization of Cutting Force and Cutting Power in Chopping Agricultural Residues Using Grey-Based Taguchi Method
Agricultural residues are the most abundant biomass and forage resources. Chopping is a precondition for either use, and reducing the shearing force has been considered as one of the most effective way to save energy. A smaller force can also permit more compact mechanical parts of chopping devices. In several cases, power consumption may be large, even when the shearing force is small, if the corresponding cutting velocity is high. Consequently, it is important to minimize both cutting force and power consumption simultaneously. This paper presents a practical approach to solve the multi-objective optimization problem for chopping processes of corn stalks. Applying the Taguchi design of experiments, a plan of 27 chopping tests was conducted. Based on the grey relational grade analysis and analysis of variance technique, optimum levels as well as the percentage contribution of such parameters were identified. Experimental results showed that the multi-response optimization problem in chopping corn stalks can be effectively addressed through the combination of Taguchi design and grey relational analysis. The results can be expanded for practical applications in design and operation of chopping machines for agricultural residues.
- Open Access
- 13 December 2018
- Published by MDPI AG in Applied Sciences
- Vol. 8 (12) , 2600
A New Approach to Modelling the Drilling Torque in Conventional and Ultrasonic Assisted Deep-Hole Drilling Processes
This paper presents a new approach to developing the torque model in deep hole drilling, both for conventional and ultrasonic assisted drilling processes. The model was proposed as a sum of three components: the cutting, the chip evacuation and the stick-slip torques. Parameters of the new model were carried out by applying the regression analysis technique, with the correlation values higher than 0.999. The data were collected from 36 experimental dry drilling tests, both in conventional and ultrasonic assisted cutting conditions, with the depth-to-diameter of the drilled holes of 7.5. The major advantage of the new model compared to previous models is that the new model of chip-evacuation torque has only one coefficient, thus making it easier to evaluate and compare different deep-drilling processes. The effectiveness of ultrasonic assistance in deep hole drilling was also highlighted using the proposed model. The new model is promising to predict critical depth and torque in deep hole drilling.
- 13 December 2018
- Published by MDPI AG in Applied Sciences
- Vol. 8 (12) , 2600
Open AccessA New Approach to Modelling the Drilling Torque in Conventional and Ultrasonic Assisted Deep-Hole Drilling Processes
This paper presents a new approach to developing the torque model in deep hole drilling, both for conventional and ultrasonic assisted drilling processes. The model was proposed as a sum of three components: the cutting, the chip evacuation and the stick-slip torques. Parameters of the new model were carried out by applying the regression analysis technique, with the correlation values higher than 0.999. The data were collected from 36 experimental dry drilling tests, both in conventional and ultrasonic assisted cutting conditions, with the depth-to-diameter of the drilled holes of 7.5. The major advantage of the new model compared to previous models is that the new model of chip-evacuation torque has only one coefficient, thus making it easier to evaluate and compare different deep-drilling processes. The effectiveness of ultrasonic assistance in deep hole drilling was also highlighted using the proposed model. The new model is promising to predict critical depth and torque in deep hole drilling.