ZZZhe Zhang

Zhe Zhang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Zhe Zhang has a total of 24 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Hollow-Core Fiber-Tip Interferometric High-Temperature Sensor Operating at 1100 °C with High Linearity

    by Zhe Zhang, Baijie Xu, Min Zhou, Weijia Bao, Xizhen Xu, Ying Wang, Jun He, Yiping Wang

    Over decades, fiber-optic temperature sensors based on conventional single-mode fibers (SMF) have been demonstrated with either high linearity and stability in a limited temperature region or poor linearity and thermal hysteresis in a high-temperature measurement range. For high-temperature measurements, isothermal annealing is typically necessary for the fiber-optic sensors, aiming at releasing the residual stress, eliminating the thermal hysteresis and, thus, improving the high-temperature measurement linearity and stability. In this article, an annealing-free fiber-optic high-temperature (1100 °C) sensor based on a diaphragm-free hollow-core fiber (HCF) Fabry-Perot interferometer (FPI) is proposed and experimentally demonstrated. The proposed sensor exhibits an excellent thermal stability and linearity (R2 > 0.99 in a 100–1100 °C range) without the need for high-temperature annealing. The proposed sensor is extremely simple in preparation, and the annealing-free property can reduce the cost of sensor production significantly, which is promising in mass production and industry applications.


  • Open Access

    High-Efficiency Inscription of Fiber Bragg Grating Array with High-Energy Nanosecond-Pulsed Laser Talbot Interferometer

    by Zhe Zhang, Baijie Xu, Jun He, Maoxiang Hou, Weijia Bao, Yiping Wang

    A high-energy nanosecond-pulsed ultraviolet (UV) laser Talbot interferometer for high-efficiency, mass production of fiber Bragg grating (FBG) array was experimentally demonstrated. High-quality FBG arrays were successfully inscribed in both H2-free and H2-loaded standard single-mode fibers (SMFs) with high inscription efficiency and excellent reproducibility. Compared with the femtosecond pulse that had a coherent length of several tens of micrometers, a longer coherent length (~10 mm) of the employed laser rendered a wider FBG wavelength versatility over 700 nm band (1200–1900 nm) without the need for optical path difference (OPD) compensation. Dense FBG array with center wavelength separation of ~0.4 nm was achieved and more than 1750 FBGs with separated center wavelength could be inscribed in a single H2-free or H2-loaded SMF in theory, which is promising for mass production of FBG arrays in industry. Moreover, precise focusing of laser beam was superfluous for the proposed system due to the high energy density of pulse. The proposed FBG inscription system was promising for industrialization production of dense FBG arrays.


  • Open Access

    Nonlinear Hydraulic Pressure Response of an Improved Fiber Tip Interferometric High-Pressure Sensor

    by Wei Huang, Zhe Zhang, Jun He, Bin Du, Changrui Liao, Shen Liu, Guolu Yin, Yiping Wang

    We demonstrate a silica diaphragm-based fiber tip Fabry–Perot interferometer (FPI) for high-pressure (40 MPa) sensing. By using a fiber tip polishing technique, the thickness of the silica diaphragm could be precisely controlled and the pressure sensitivity of the fabricated FPI sensor was enhanced significantly by reducing the diaphragm thickness; however, the relationship between the pressure sensitivity and diaphragm thickness is not linear. A high sensitivity of −1.436 nm/MPa and a linearity of 0.99124 in hydraulic pressure range of 0 to 40 MPa were demonstrated for a sensor with a diaphragm thickness of 4.63 μm. The achieved sensitivity was about one order of magnitude higher than the previous results reported on similar fiber tip FPI sensors in the same pressure measurement range. Sensors with a thinner silica diaphragm (i.e., 4.01 and 2.09 μm) rendered further increased hydraulic pressure sensitivity, but yield a significant nonlinear response. Two geometric models and a finite element method (FEM) were carried out to explain the nonlinear response. The simulation results indicated the formation of cambered internal silica surface during the arc discharge process in the fiber tip FPI sensor fabrication.


  • Open Access

    Temperature Sensor Based on Side-Polished Fiber SPR Device Coated with Polymer

    by Shuhui Liu, Shaoqing Cao, Zhe Zhang, Ying Wang, Changrui Liao, Yiping Wang

    A highly sensitive temperature sensor based on surface plasmon resonance (SPR) of a side-polished single mode fiber is demonstrated. The sensor consists of a gold film coated side-polished fiber covered by a layer of UV-curable adhesive. Before introducing the UV-curable adhesive, the gold-coated fiber exhibits refractive index (RI) sensitivity of 1691.6 nm/RIU to 8800 nm/RIU in the range of 1.32 to 1.43. The resonant wavelength of the SPR sensor shifts to 650 nm when the adhesive is coated on the gold film, and is fixed at about 725 nm when the adhesive is cured. Due to the high thermo-optic and thermal expansion coefficient of the adhesive, the sensor structure achieves a temperature sensitivity of −0.978 nm/°C between 25 °C and 100 °C. The proposed optical fiber SPR sensor is simple, highly sensitive and cost effective, which may find potential applications for temperature measurements in the biomedical and environmental industries.


  • Open Access

    Symmetric Step-Apodized Distributed Feedback Fiber Laser With Improved Efficiency

    by Kuikui Guo, Jun He, Kaiming Yang, Zhe Zhang, Xizhen Xu, Bin Du, Gaixia Xu, Yiping Wang

    We propose and demonstrate a symmetric step-apodized distributed feedback (DFB) fiber laser, which has an improved efficiency and a narrow linewidth. This special DFB laser cavity is based on a unique symmetric step-apodized π-phase-shifted fiber Bragg grating (FBG) directly inscribed in a heavily-erbium-doped fiber. The symmetric step-apodized phase-shifted grating is equivalent to a weak uniform phase-shifted FBG embedded in a pair of strong FBGs, and this design could increase the effective cavity length of a DFB fiber laser. Moreover, the symmetric step-apodized DFB laser cavity proposed in this work has a phase shift located in the cavity center. It could simplify the design process significantly due to the symmetry in laser cavity. Experimental results show that the slope efficiency of a symmetric step-apodized DFB fiber laser could be increased to 1.06%, which is significantly higher than that of a uniform DFB fiber laser (i.e. 0.45%) under the same cavity length and pump conditions. In addition, the proposed DFB fiber laser exhibits a high stability. The fluctuations in lasing wavelength and output power were less than 12 pm (corresponding to a frequency shift of 1.49 GHz) and 0.13 dB within 24 hours, respectively. Moreover, the full width at half maximum (FWHM) linewidth of the symmetric step-apodized DFB fiber laser was ~2.6 kHz, measured by the delayed self-heterodyne method with a 50 km fiber delayed line. As such, the proposed symmetric step-apodized DFB fiber laser could potentially be used as high-performance light source for fiber-optic sensors or coherent optical communication systems.


  • Open Access

    Antiresonant Reflecting Guidance and Mach-Zender Interference in Cascaded Hollow-Core Fibers for Multi-Parameter Sensing

    by Maoxiang Hou, Jun He, Xizhen Xu, Ziliang Li, Zhe Zhang, Kuikui Guo, Shuai Ju, Yiping Wang

    We propose and demonstrate a cascaded hollow-core fiber (HCF) device for multi-parameter sensing based on the combination of antiresonant reflecting guidance (ARRG) and Mach-Zender interference (MZI). The device was fabricated by splicing two sections of HCF together. Two sets of fringes, which have different free spectral ranges, were generated from ARRG and MZI, respectively, and were aliasing in the transmission spectrum. The two sets of fringes were then separated using a band pass filter and a Gaussian fitting technique. The wavelengths at two transmission loss dips formed by ARRG and MZI exhibit a temperature sensitivity of 14.1 and 28.5 pm/°C, and a strain sensitivity of 0.4 and −0.8 pm/με, respectively. By using a crossing matrix with differences sensitivities, the cross-sensitivity between temperature and strain can be solved. The gas pressure response of the cascaded HCF device was also tested up to 300 °C, and linear relationships between the gas pressure sensitivities and temperature were found, which can be used in gas pressure application in various temperatures. Moreover, the proposed cascaded HCF sensor is compact, low cost, and simple for fabrication, and hence offers a promising way for the simultaneous measurement of multiple parameters, such as temperature, strain, and gas pressure.