Bo Zhang
Bo Zhang has a total of 35 co-authors. Here are the top co-authors by number of shared publications:
Junyan Deng
Chengdu Aircraft Industry (Group) Co., Ltd., Chengdu 610091
3 shared publicationsJinglong Han
Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China
2 shared publicationsWei Hu
Chengdu Aircraft Industry (Group) Co., Ltd., Chengdu 610091
2 shared publicationsBiao Ren
Sichuan University
1 shared publication- Bohan Yang
College of Traditional Chinese Medicine Xinjiang Medical University Urumq Xinjiang China
1 shared publication Bomiao Cui
Sichuan University
1 shared publication
Latest Publications
- Open Access
- 1 June 2026
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 3254 (3)
Wind tunnel test of a hypersonic all-movable control surface with freeplay
Hypersonic vehicles operating under extreme environmental conditions often experience limit cycle oscillations (LCOs) in their control surfaces due to mechanical freeplay, posing significant risks to flight stability and structural safety. This paper conducts a wind tunnel test on an all-movable control surface with freeplay to investigate its nonlinear aeroelastic response and flutter characteristics. Modal parameters are identified using the random decrement technique and the complex mode indicator function method. By analyzing the variation of damping with dynamic pressure, the critical flutter dynamic pressure of the control surface is determined. The study provides reliable experimental evidence for the aeroelastic design and safety assessment of hypersonic control surfaces.
- 1 June 2026
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 3254 (3)
Open AccessWind tunnel test of a hypersonic all-movable control surface with freeplay
Hypersonic vehicles operating under extreme environmental conditions often experience limit cycle oscillations (LCOs) in their control surfaces due to mechanical freeplay, posing significant risks to flight stability and structural safety. This paper conducts a wind tunnel test on an all-movable control surface with freeplay to investigate its nonlinear aeroelastic response and flutter characteristics. Modal parameters are identified using the random decrement technique and the complex mode indicator function method. By analyzing the variation of damping with dynamic pressure, the critical flutter dynamic pressure of the control surface is determined. The study provides reliable experimental evidence for the aeroelastic design and safety assessment of hypersonic control surfaces.
- Open Access
- 1 June 2026
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 3256 (1)
LCO prediction in hypersonic control surfaces due to freeplay: a CFD/CSD coupling analysis
The pursuit of extreme speed and agility has positioned hypersonic vehicles at the forefront of aerospace engineering. A critical challenge in their design is the aeroelastic behavior of control surfaces, which is exacerbated by the inevitable presence of structural freeplay at mechanical hinges. These nonlinearities can precipitate dangerous Limit Cycle Oscillations (LCOs), compromising structural integrity and flight control. This study integrates a coupled Computational Fluid Dynamics/Computational Structural Dynamics (CFD/CSD) framework with experimental wind tunnel data to investigate and predict LCOs in a hypersonic control surface with freeplay. A high-fidelity finite element model of the freeplay control surface was developed and validated through modal hammer tests, showing excellent agreement for the first five natural modes (max error < 3.5%). Subsequently, time-accurate, bidirectional CFD/CSD simulations were performed at Mach 5.0 across a range of dynamic pressures. The results delineate the transition from stable response to LCO, identifying the onset of dynamic pressure at approximately 32 kPa. The LCO amplitude was found to grow with increasing dynamic pressure. This work establishes a validated numerical-experimental methodology for predicting freeplay-induced LCOs, offering practical insights for the design and safety assessment of hypersonic vehicle control surfaces.
- 1 June 2026
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 3256 (1)
Open AccessLCO prediction in hypersonic control surfaces due to freeplay: a CFD/CSD coupling analysis
The pursuit of extreme speed and agility has positioned hypersonic vehicles at the forefront of aerospace engineering. A critical challenge in their design is the aeroelastic behavior of control surfaces, which is exacerbated by the inevitable presence of structural freeplay at mechanical hinges. These nonlinearities can precipitate dangerous Limit Cycle Oscillations (LCOs), compromising structural integrity and flight control. This study integrates a coupled Computational Fluid Dynamics/Computational Structural Dynamics (CFD/CSD) framework with experimental wind tunnel data to investigate and predict LCOs in a hypersonic control surface with freeplay. A high-fidelity finite element model of the freeplay control surface was developed and validated through modal hammer tests, showing excellent agreement for the first five natural modes (max error < 3.5%). Subsequently, time-accurate, bidirectional CFD/CSD simulations were performed at Mach 5.0 across a range of dynamic pressures. The results delineate the transition from stable response to LCO, identifying the onset of dynamic pressure at approximately 32 kPa. The LCO amplitude was found to grow with increasing dynamic pressure. This work establishes a validated numerical-experimental methodology for predicting freeplay-induced LCOs, offering practical insights for the design and safety assessment of hypersonic vehicle control surfaces.
- Open Access
- 1 August 2025
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 3085 (1)
Prediction of nonlinear aeroelastic systems LCO based on dynamic stiffness measurement
This paper investigates a non-linear aeroelastic system limit cycle oscillations prediction algorithm based on dynamic stiffness measurement. The equivalent stiffness of the system at different amplitudes and frequencies, which is obtained by experiment, is substituted into the non-linear aeroelastic systems, and the frequency and amplitude of LCO for the non-linear aeroelastic systems at this equivalent stiffness are calculated. The simulation result shows that the frequency domain method can accurately predict the critical velocity of LCO. For the same LCO, the frequency domain method predicts that the critical velocity is consistent with the time domain method.
- 1 August 2025
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 3085 (1)
Open AccessPrediction of nonlinear aeroelastic systems LCO based on dynamic stiffness measurement
This paper investigates a non-linear aeroelastic system limit cycle oscillations prediction algorithm based on dynamic stiffness measurement. The equivalent stiffness of the system at different amplitudes and frequencies, which is obtained by experiment, is substituted into the non-linear aeroelastic systems, and the frequency and amplitude of LCO for the non-linear aeroelastic systems at this equivalent stiffness are calculated. The simulation result shows that the frequency domain method can accurately predict the critical velocity of LCO. For the same LCO, the frequency domain method predicts that the critical velocity is consistent with the time domain method.
- Open Access
- 1 March 2022
- Published by Future Energy Service and Publishing in Trends in Renewable Energy
- Vol. 8 (1) , 67-83
Life Cycle Assessment of a Coke Cleaning Agent
- 1 March 2022
- Published by Future Energy Service and Publishing in Trends in Renewable Energy
- Vol. 8 (1) , 67-83
Open AccessLife Cycle Assessment of a Coke Cleaning Agent
- 22 April 2021
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering
- Vol. 236 (2) , 254-261
Fuzzy control of nonlinear aeroelastic system based on neural network identification
This article presents a fuzzy control method for the limit cycle oscillation (LCO) suppression of nonlinear aeroelastic systems based on the neural network identification algorithm. A prototypical 2D wing section with a single control surface at the trailing edge of the main wing, which contains a symmetrical free play nonlinearity in the pitch degree of freedom, is modeled to illustrate the proposed method. A neural network is used to identify the fuzzy control rules from the existing LCO suppression input and output data. A new fuzzy control rate of the nonlinear aeroelastic system is obtained by adjusting the parameters of the fuzzy control surface. Numerical simulations are conducted to verify the effectiveness of the proposed method.
- 22 April 2021
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering
- Vol. 236 (2) , 254-261
Fuzzy control of nonlinear aeroelastic system based on neural network identification
This article presents a fuzzy control method for the limit cycle oscillation (LCO) suppression of nonlinear aeroelastic systems based on the neural network identification algorithm. A prototypical 2D wing section with a single control surface at the trailing edge of the main wing, which contains a symmetrical free play nonlinearity in the pitch degree of freedom, is modeled to illustrate the proposed method. A neural network is used to identify the fuzzy control rules from the existing LCO suppression input and output data. A new fuzzy control rate of the nonlinear aeroelastic system is obtained by adjusting the parameters of the fuzzy control surface. Numerical simulations are conducted to verify the effectiveness of the proposed method.
- Open Access
- 15 December 2020
- Published by JVE International Ltd. in Journal of Vibroengineering
- Vol. 23 (2) , 449-458
Unsteady aerodynamic identification based on recurrent neural networks
The dynamic stall at high angle of attack is an important aerodynamic problem faced by aircraft, and it has always been a hotspot of aerodynamic research. The traditional reduced order model (ROM) methods needs to establish an accurate model, and has a high demand for experience. In this paper, a novel nonlinear aerodynamic identification method based on recurrent neural networks (RNNs) is proposed. The computational fluid dynamics (CFD) method is used to calculate the unsteady aerodynamic parameters of the NACA0012 airfoil. A group of sinusoidal chirp signals with variable amplitude and frequency are adopted as the excitation signals, and the obtained data are used to train the recurrent neural networks, and the ROM of the nonlinear aerodynamic model of high angle of attack dynamic stall is obtained. Finally, the aerodynamic parameters of a group of composite sinusoidal motion signals different from the training signals are predicted by the trained neural networks model and compared with the CFD results.
- 15 December 2020
- Published by JVE International Ltd. in Journal of Vibroengineering
- Vol. 23 (2) , 449-458
Open AccessUnsteady aerodynamic identification based on recurrent neural networks
The dynamic stall at high angle of attack is an important aerodynamic problem faced by aircraft, and it has always been a hotspot of aerodynamic research. The traditional reduced order model (ROM) methods needs to establish an accurate model, and has a high demand for experience. In this paper, a novel nonlinear aerodynamic identification method based on recurrent neural networks (RNNs) is proposed. The computational fluid dynamics (CFD) method is used to calculate the unsteady aerodynamic parameters of the NACA0012 airfoil. A group of sinusoidal chirp signals with variable amplitude and frequency are adopted as the excitation signals, and the obtained data are used to train the recurrent neural networks, and the ROM of the nonlinear aerodynamic model of high angle of attack dynamic stall is obtained. Finally, the aerodynamic parameters of a group of composite sinusoidal motion signals different from the training signals are predicted by the trained neural networks model and compared with the CFD results.
- Open Access
- 15 October 2018
- Published by MDPI AG in Applied Sciences
- Vol. 8 (10) , 1916
Nonlinear Aeroelastic System Identification Based on Neural Network
This paper focuses on the nonlinear aeroelastic system identification method based on an artificial neural network (ANN) that uses time-delay and feedback elements. A typical two-dimensional wing section with control surface is modelled to illustrate the proposed identification algorithm. The response of the system, which applies a sine-chirp input signal on the control surface, is computed by time-marching-integration. A time-delay recurrent neural network (TDRNN) is employed and trained to predict the pitch angle of the system. The chirp and sine excitation signals are used to verify the identified system. Estimation results of the trained neural network are compared with numerical simulation values. Two types of structural nonlinearity are studied, cubic-spring and friction. The results indicate that the TDRNN can approach the nonlinear aeroelastic system exactly.
- 15 October 2018
- Published by MDPI AG in Applied Sciences
- Vol. 8 (10) , 1916
Open AccessNonlinear Aeroelastic System Identification Based on Neural Network
This paper focuses on the nonlinear aeroelastic system identification method based on an artificial neural network (ANN) that uses time-delay and feedback elements. A typical two-dimensional wing section with control surface is modelled to illustrate the proposed identification algorithm. The response of the system, which applies a sine-chirp input signal on the control surface, is computed by time-marching-integration. A time-delay recurrent neural network (TDRNN) is employed and trained to predict the pitch angle of the system. The chirp and sine excitation signals are used to verify the identified system. Estimation results of the trained neural network are compared with numerical simulation values. Two types of structural nonlinearity are studied, cubic-spring and friction. The results indicate that the TDRNN can approach the nonlinear aeroelastic system exactly.
- 1 July 2011
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 409-412
Modal analysis of construction hoist based on ANSYS
The dynamic stress caused by vibration when construction hoist is working may cause the structure damage, so the dynamic analysis is an essential part in the design of construction hoist. This paper establishes a dynamic model of construction hoist by ANSYS, then conducts modal analysis, and gets the first 6 natural frequency and vibration modes.
- 1 July 2011
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 409-412
Modal analysis of construction hoist based on ANSYS
The dynamic stress caused by vibration when construction hoist is working may cause the structure damage, so the dynamic analysis is an essential part in the design of construction hoist. This paper establishes a dynamic model of construction hoist by ANSYS, then conducts modal analysis, and gets the first 6 natural frequency and vibration modes.