Valeriia Rostovtseva
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Valeriia Rostovtseva has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Aleksandra Y. Pulyalina
Institute of Chemistry, St. Petersburg State University, St. Petersburg, Russia
6 shared publications - Galina Polotskaya
Institute of Chemistry, Saint Petersburg State University, Universitetskiy pr. 26, Saint Petersburg 198504, Russia
4 shared publications - Maksim Tataurov
Institute of Chemistry, Saint Petersburg State University, Universitetskiy pr. 26, 198504 Saint Petersburg, Russia
3 shared publications - Alexander M. Toikka
Department of Chemical Thermodynamics and Kinetics, Saint Petersburg State University, Universitetskiy prospect 26, Peterhof, St. Petersburg 198504, Russia
2 shared publications - Galina A. Polotskaya
Institute of Chemistry, Saint Petersburg State University, 198504 Saint Petersburg, Russia
2 shared publications - Ilya Faykov
Institute of Chemistry, Saint Petersburg State University, Universitetskiy pr. 26, 198504 Saint Petersburg, Russia
2 shared publications
Latest Publications
- Open Access
Specific Structure and Properties of Composite Membranes Based on the Torlon® (Polyamide-imide)/Layered Perovskite Oxide
The use of perovskite-type layered oxide K2La2Ti3O10 (Per) as a modifier of the Torlon® polyamide-imide (PAI) membrane has led to the formation of an specific structure of a dense nonsymmetrical film, namely, a thin perovskite-enriched layer (3–5 μm) combined with the polymer matrix (~30 μm). The PAI/Per membrane structure was studied by SEM in combination with energy dispersive microanalysis of the elemental composition which illustrated different compositions of top and bottom surfaces of the perovskite-containing membranes. Measurement of water and alcohol contact angles and calculation of surface tension revealed hydrophilization of the membrane surface enriched with perovskite. The transport properties of the nonsymmetrical PAI/Per membranes were studied in the pervaporation of ethanol‒ethyl acetate mixture. The inclusion of 2 wt.% Per in the PAI gives a membrane with a high separation factor and increased total flux.
Open AccessSpecific Structure and Properties of Composite Membranes Based on the Torlon® (Polyamide-imide)/Layered Perovskite Oxide
The use of perovskite-type layered oxide K2La2Ti3O10 (Per) as a modifier of the Torlon® polyamide-imide (PAI) membrane has led to the formation of an specific structure of a dense nonsymmetrical film, namely, a thin perovskite-enriched layer (3–5 μm) combined with the polymer matrix (~30 μm). The PAI/Per membrane structure was studied by SEM in combination with energy dispersive microanalysis of the elemental composition which illustrated different compositions of top and bottom surfaces of the perovskite-containing membranes. Measurement of water and alcohol contact angles and calculation of surface tension revealed hydrophilization of the membrane surface enriched with perovskite. The transport properties of the nonsymmetrical PAI/Per membranes were studied in the pervaporation of ethanol‒ethyl acetate mixture. The inclusion of 2 wt.% Per in the PAI gives a membrane with a high separation factor and increased total flux.
- Open Access
Correction: Pulyalina, A.; Tataurov, M.; Faykov, I.; Rostovtseva, V.; Polotskaya, G. Polyimide Asymmetric Membrane vs. Dense Film for Purification of MTBE Oxygenate by Pervaporation, Symmetry 2020, 12(3), 436
The authors wish to make the following corrections and explanations to this paper [1]: (1) The authors in the Funding section of
Open AccessCorrection: Pulyalina, A.; Tataurov, M.; Faykov, I.; Rostovtseva, V.; Polotskaya, G. Polyimide Asymmetric Membrane vs. Dense Film for Purification of MTBE Oxygenate by Pervaporation, Symmetry 2020, 12(3), 436
The authors wish to make the following corrections and explanations to this paper [1]: (1) The authors in the Funding section of
- Open Access
Strongly Selective Polymer Membranes Modified with Heteroarm Stars for the Ethylene Glycol Dehydration by Pervaporation
Hybrid membranes based on poly (2,6-dimethyl-1,4-phenylene oxide) modified with heteroarm stars (HAS) were developed to separate ethylene glycol/water mixtures by pervaporation. The HAS consist of a small branching center fullerene C 60 and twelve arms of different nature, six arms of nonpolar polystyrene and six arms of polar poly-tert-butyl methacrylate. The changes of structure and physical properties with HAS inclusion were systematically studied using SEM, X-ray diffraction analysis, TGA, and contact angle measurements. Mass transfer of ethylene glycol and water through membranes was studied by sorption and pervaporation tests. It was found that the growth of HAS content up to 5 wt% in the membrane leads to an increase in the total flux and a strong increase in the separation factor. To evaluate intrinsic properties of the penetrant–membrane system, permeability and selectivity were calculated. Overall, utilizing star-shaped macromolecules as a filler can be a promising way to improve the separation performance of diffusion membranes.
Open AccessStrongly Selective Polymer Membranes Modified with Heteroarm Stars for the Ethylene Glycol Dehydration by Pervaporation
Hybrid membranes based on poly (2,6-dimethyl-1,4-phenylene oxide) modified with heteroarm stars (HAS) were developed to separate ethylene glycol/water mixtures by pervaporation. The HAS consist of a small branching center fullerene C 60 and twelve arms of different nature, six arms of nonpolar polystyrene and six arms of polar poly-tert-butyl methacrylate. The changes of structure and physical properties with HAS inclusion were systematically studied using SEM, X-ray diffraction analysis, TGA, and contact angle measurements. Mass transfer of ethylene glycol and water through membranes was studied by sorption and pervaporation tests. It was found that the growth of HAS content up to 5 wt% in the membrane leads to an increase in the total flux and a strong increase in the separation factor. To evaluate intrinsic properties of the penetrant–membrane system, permeability and selectivity were calculated. Overall, utilizing star-shaped macromolecules as a filler can be a promising way to improve the separation performance of diffusion membranes.
- Open Access
Polyimide Asymmetric Membrane vs. Dense Film for Purification of MTBE Oxygenate by Pervaporation
Membrane properties are determined by their morphology, which may be symmetric (dense) or asymmetric (dense/porous). Two membrane types based on the poly[(4,4′-oxydiphenylene)pyromelliteimide] (symmetric dense and asymmetric dense/porous) were prepared for a comparative study of morphology, physical properties, and transport characteristics in the pervaporation of methanol/MTBE mixture over a wide range of concentrations including the azeotropic composition. The asymmetric membrane is a good example of improving the transport properties of the polyimide by creating structure composed of a thin dense top layer on the surface of sponge-like microporous substrate. It was found that the use of the asymmetric membrane allows increasing the total flux in separation of azeotropic mixture by 15 times as compared with the dense membrane.
Open AccessPolyimide Asymmetric Membrane vs. Dense Film for Purification of MTBE Oxygenate by Pervaporation
Membrane properties are determined by their morphology, which may be symmetric (dense) or asymmetric (dense/porous). Two membrane types based on the poly[(4,4′-oxydiphenylene)pyromelliteimide] (symmetric dense and asymmetric dense/porous) were prepared for a comparative study of morphology, physical properties, and transport characteristics in the pervaporation of methanol/MTBE mixture over a wide range of concentrations including the azeotropic composition. The asymmetric membrane is a good example of improving the transport properties of the polyimide by creating structure composed of a thin dense top layer on the surface of sponge-like microporous substrate. It was found that the use of the asymmetric membrane allows increasing the total flux in separation of azeotropic mixture by 15 times as compared with the dense membrane.
- Open Access
Asymmetric Membranes Based on Copolyheteroarylenes with Imide, Biquinoline, and Oxazinone Units: Formation and Characterization
Modern ultrafiltration requires novel perfect membranes with narrow pore size, high porosity, and minimal pore tortuosity to achieve high separation performance. In this work, copolyamic acid (co-PAA) was synthesized and used for the preparation of asymmetric porous membranes by phase inversion technique. Several co-PAA membranes were heated up to 250 °C; during heating, they undergo solid-phase transformation into co-polybenzoxazinoneimide (co-PBOI) via dehydration and cyclization. Comparative characterization of both co-PAA and co-PBOI membranes was realized by scanning electron microscopy, mechanical testing, thermogravimetric analysis, and ultrafiltration experiments. Membrane calibration was carried out using a mixture of seven proteins with different molecular weights. During heat treatment, the molecular weight cut-off of the membranes decreased from 20 × 103 g/mol (co-PAA) to 3 × 103 g/mol (co-PBOI). Abnormally low dispersions of rejection (0.3 for co-PAA and 0.45 for co-PBOI) were observed for the studied membranes; this fact indicates that the membranes possess enhanced resolving power.
Open AccessAsymmetric Membranes Based on Copolyheteroarylenes with Imide, Biquinoline, and Oxazinone Units: Formation and Characterization
Modern ultrafiltration requires novel perfect membranes with narrow pore size, high porosity, and minimal pore tortuosity to achieve high separation performance. In this work, copolyamic acid (co-PAA) was synthesized and used for the preparation of asymmetric porous membranes by phase inversion technique. Several co-PAA membranes were heated up to 250 °C; during heating, they undergo solid-phase transformation into co-polybenzoxazinoneimide (co-PBOI) via dehydration and cyclization. Comparative characterization of both co-PAA and co-PBOI membranes was realized by scanning electron microscopy, mechanical testing, thermogravimetric analysis, and ultrafiltration experiments. Membrane calibration was carried out using a mixture of seven proteins with different molecular weights. During heat treatment, the molecular weight cut-off of the membranes decreased from 20 × 103 g/mol (co-PAA) to 3 × 103 g/mol (co-PBOI). Abnormally low dispersions of rejection (0.3 for co-PAA and 0.45 for co-PBOI) were observed for the studied membranes; this fact indicates that the membranes possess enhanced resolving power.
- Open Access
Improved Hydrogen Separation Using Hybrid Membrane Composed of Nanodiamonds and P84 Copolyimide
Membrane gas separation is a prospective technology for hydrogen separation from various refinery and petrochemical process streams. To improve efficiency of gas separation, a novel hybrid membrane consisting of nanodiamonds and P84 copolyimide is developed. The particularities of the hybrid membrane structure, physicochemical, and gas transport properties were studied by comparison with that of pure P84 membrane. The gas permeability of H2, CO2, and CH4 through the hybrid membrane is lower than through the unmodified membrane, whereas ideal selectivity in separation of H2/CO2, H2/CH4, and CO2/CH4 gas pairs is higher for the hybrid membrane. Correlation analysis of diffusion and solubility coefficients confirms the reliability of the gas permeability results. The position of P84/ND membrane is among the most selective membranes on the Robeson diagram for H2/CH4 gas pair.
Open AccessImproved Hydrogen Separation Using Hybrid Membrane Composed of Nanodiamonds and P84 Copolyimide
Membrane gas separation is a prospective technology for hydrogen separation from various refinery and petrochemical process streams. To improve efficiency of gas separation, a novel hybrid membrane consisting of nanodiamonds and P84 copolyimide is developed. The particularities of the hybrid membrane structure, physicochemical, and gas transport properties were studied by comparison with that of pure P84 membrane. The gas permeability of H2, CO2, and CH4 through the hybrid membrane is lower than through the unmodified membrane, whereas ideal selectivity in separation of H2/CO2, H2/CH4, and CO2/CH4 gas pairs is higher for the hybrid membrane. Correlation analysis of diffusion and solubility coefficients confirms the reliability of the gas permeability results. The position of P84/ND membrane is among the most selective membranes on the Robeson diagram for H2/CH4 gas pair.