Enzhi Wang

With the rapid expansion of urban underground space in China, anti-floating has become a critical challenge, and uplift piles are a key solution. Previous studies on composite anchor-cable uplift piles have primarily focused on small-diameter single-pipe types (≤600 mm), often simplifying the pile as an integral component, leaving the multi-interface stress transfer mechanisms of large-diameter piles inadequately understood. This study proposes a back-analysis method based on orthogonal experiments, implemented using Abaqus 3D finite element software, to determine interfacial mechanical parameters for three critical contact pairs (strand-grout, grout-steel pipe, steel pipe-concrete) in large-diameter multi-pipe composite anchor-cable uplift piles. These parameters are then implemented in a refined 3D finite element model to simulate the load-deformation behavior of such piles. Quantitative results show that the back-calculated parameters are highly reliable, with maximum simulation errors for pile head displacement limited to 13.0% and 9.6% for fully bonded and semi-bonded piles, respectively. Unlike conventional piles, stress and strain in this new pile type transfer progressively from the inner steel strands outward and from the top downward, resulting in reduced pile-soil displacement mismatch, fuller mobilization of side interfacial strength, and effective mitigation of concrete cracking. This study provides a systematic parameter-calibration framework and numerical platform, offering theoretical and technical support for optimized design and engineering application of large-diameter composite uplift piles.

Revealing geological environment resilience (GER) under seawater intrusion (SWI) hazards is a prerequisite for solving groundwater resource depletion, land salinization, and ecological degradation in coastal cities. This study applies the resilience design approach based on urban complex adaptive systems theory to understand the impact of SWI on the geological environment. Taking SWI as the research object, the GER evaluation method under SWI disaster was established by selecting five elastic indexes: disturbance intensity, geological environment vulnerability, stress resistance, recovery, and adaptability. This method is used to evaluate the GER level of the coastal areas of Shenzhen in recent years under the impact of SWI hazards. The study found that there is a negative correlation between the intensity of disturbance and precipitation amount. The vulnerability is greater the closer the distance to the coastline and the shallower the depth of bedrock burial. Resistance is composed of early warning ability and disaster prevention ability, and the result is 10.07, which belongs to the medium level. The recovery is 1.49, which is at a relatively high level, indicating a high capacity for restoration ability. The adaptability increased from 3.03 to 3.13, so that the area of seawater intrusion is becoming smaller. GER is affected by precipitation amount and depth of bedrock burial; the greater the precipitation and the shallower the bedrock burial, the lower the GER. Precipitation amount significantly impacts the SWI situation in the eastern coastal area of Shenzhen. In the central region, the impact of precipitation on GER is less significant. However, in the western region, the depth of bedrock burial primarily affects GER. Compared to completely weathered granite, Pleistocene fluvial plain sediments are more susceptible to SWI effects in freshwater environments. This study contributes to a deeper understanding of the impact of SWI on the geological environment in coastal areas, providing decision-makers with the necessary knowledge to develop targeted and effective governance and prevention strategies.

This paper presents a novel design for uplift piles incorporating a composite-anchor system. The composite-anchor system consists of steel strands, a non-expansion grouting body, and a high-strength steel pile. The aim of this design is to enhance the mechanical performance, durability, and economic efficiency of uplift piles. To evaluate the performance of the new pile, three sets of full-scale load tests were conducted, focusing on their in situ capacity, deformation, and stress characteristics. Despite a significantly lower reinforcement ratio of 0.75% compared to conventional piles with a ratio of 3.84%, the new uplift piles exhibit an exceptional uplift bearing performance. The utilization of the lateral friction resistance of the lower pile body is significantly improved, leading to enhanced load distribution and stress transfer mechanisms. Furthermore, a numerical model was developed and validated against the experimental results, demonstrating its reliability in simulating the bearing characteristics of the new uplift piles. The multi-interface design of the composite-anchor system ensures the efficient transmission of internal forces induced by external uplift loads, resulting in an improved stress state within the pile body. Moreover, the multi-layer structure of the composite main bar enhances the durability of the uplift piles. In comparison to conventional piles, the new uplift pile design offers substantial advantages, including an 80% reduction in reinforcement ratio, a 65% reduction in reinforcement cage welding, a cost reduction of approximately 30%, and a shortened construction time by around 20%. These findings highlight the potential of the new composite-anchor-pile design to revolutionize the field of uplift pile applications, offering improved efficiency and effectiveness.

We have attempted a multiscale and quantified characterization method of the contact in three-dimensional granular material made of spherical particles, particularly in cemented granular material. Particle contact is defined as a type of surface contact with voids in its surroundings, rather than a point contact. Macro contact is a particle contact set satisfying the restrictive condition of a two-dimensional manifold with a boundary. On the basis of graph theory, two dual geometrical systems are abstracted from the granular pack. The face and the face set, which satisfies the two-dimensional manifold with a boundary in the solid cell system, are extracted to characterize the particle contact and the macro contact, respectively. This characterization method is utilized to improve the post-processing in DEM (Discrete Element Method) from a micro perspective to describe the macro effect of the cemented granular material made of spherical particles. Since the crack has the same shape as its corresponding contact, this method is adopted to characterize the crack and realize its visualization. The integral failure route of the sample can be determined by a graph theory algorithm. The contact force is assigned to the weight value of the face characterizing the particle contact. Since the force vectors can be added, the macro contact force can be solved by adding the weight of its corresponding faces.

This paper attempted to provide a method to calculate progressive failure of the cohesivefrictional granular geomaterial and the spatial distribution of the stability of the cohesive granular slope. The methodology can be divided into two parts: the characterization method of macro-contact and the analysis of the slope stability. Based on the graph theory, the vertexes, the edges and the edge sequences are abstracted out to characterize the voids, the particle contact and the macro-contact, respectively, bridging the gap between the mesoscopic and macro scales of granular materials. This paper adopts this characterization method to extract a graph from a granular slope and characterize the macro sliding surface, then the weighted graph is analyzed to calculate the slope safety factor. Each edge has three weights representing the sliding moment, the anti-sliding moment and the braking index of contact-bond, respectively, . The safety factor of the slope is calculated by presupposing a certain number of sliding routes and reducing Weight repeatedly and counting the mesoscopic failure of the edge. It is a kind of slope analysis method from mesoscopic perspective so it can present more detail of the mesoscopic property of the granular slope. In the respect of macro scale, the spatial distribution of the stability of the granular slope is in agreement with the theoretical solution.

CO₂ geosequestration is currently considered to be the most effective and economical method to dispose of artificial greenhouse gases. There are a large number of coal mines that will be scrapped, and some of them are located in deep formations in China. CO₂ storage in abandoned coal mines will be a potential option for greenhouse gas disposal. However, CO₂ trapping in deep coal pillars would induce swelling effects of coal matrix. Adsorption-induced swelling not only modifies the volume and permeability of coal mass, but also causes the basic physical and mechanical properties changing, such as elastic modulus and Poisson ratio. It eventually results in some reduction in pillar strength. Based on the fractional swelling as a function of time and different loading pressure steps, the relationship between volumetric stress and adsorption pressure increment is acquired. Eventually, this paper presents a theory model to analyze the pillar strength reduction after CO₂ adsorption. The model provides a method to quantitatively describe the interrelation of volumetric strain, swelling stress, and mechanical strength reduction after gas adsorption under the condition of step-by-step pressure loading and the non-Langmuir isothermal model. The model might have a significantly important implication for predicting the swelling stress and mechanical behaviors of coal pillars during CO₂ sequestration in abandoned coal mines.

The fluctuations of reservoir water levels significantly change the hydrogeological conditions of reservoir banks and thus affect the steady state of the bank slope. Reservoir landslide stability is governed by the complex interactions between the rock and the water (both reservoir and pore water). This paper establishes the constitutive coupled model of seepage and stress field for the E20 bank slope in the Haizhou Open Pit Coal Mine hydropower station’s lower reservoir. Using the geotechnical engineering three-dimensional fast Lagrangian analysis of continua (FLAC-3D 4.0) program as a computational analysis tool, the E20 bank slope deformation mechanism was analyzed. The simulation model, calculated by using the Boit consolidation and pore-water continuity principles, was built using FEMs. The numerical simulation results showed that cyclical fluctuations and speeds of the reservoir’s water level affect its bank slope stability. When the water level drops at a speed of 12 m/day, the simulation...