SASerkan Abbasoğlu

Serkan Abbasoğlu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Serkan Abbasoğlu has a total of 14 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Comparison of Electric and Internal Combustion Engine Vehicles from an Economic Perspective in Developing Islands

    by Meliz Hastunç, Mehmet Şenol, Serkan Abbasoğlu

    This paper introduces a global model for analyzing diverse car segments, featuring a novel algorithm as a decision-making tool for future calculations and policymaking. This analysis was carried out by using the total cost of ownership (TCO) across seven car segments categorized by the European Union Commission, spanning from small to luxury models. Focusing on North Cyprus as a case study—particularly relevant for developing islands—the study assesses how adopting 100% photovoltaic (PV) energy affects electric vehicle (EV) TCO. Given the absence of current financial incentives in North Cyprus, the research evaluates two support schemes tailored to different segments, measuring the minimum and maximum incentives required based on EV sales prices. In the base-case scenario, TCO ranges from €23,790.79 to €176,498.07. In general, a 13.92% average support is required as an incentive for EV TCO to be equivalent in price with internal combustion engine vehicles, this decreases to 7.99% with a value-added-tax-free and road-tax-free incentive toward EVs. Some segments show TCO price equivalence, reducing reliance on substantial incentives and preserving government revenue, vital for developing islands. The analysis reveals an average TCO reduction of 8.81% for smaller segments and 13.5% for larger segments with applied incentives. 100% PV energy adoption leads to an average TCO decrease of 4.54% for smaller segments and 2.84% for larger segments. Additionally, the study notes a correlation between rising automobile purchase prices and a decrease in the impact of social cost of carbon and the levelized cost of PV energy.


  • Open Access

    Performance Loss Rates of a 1 MWp PV Plant with Various Tilt Angle, Orientation and Installed Environment in the Capital of Cyprus

    by Turgut Karahüseyin, Serkan Abbasoğlu

    Evolution from fossil fuel sources to environmentally friendly and sustainable energy sources is one of the key aspects of the energy transition goal. On the other hand, Solar Photovoltaic systems are the most promising and improving technologies in the energy market However, it is well known that the performance of PV panels decreases in the process of time. This paper focuses on analyzing the performance loss rates (PLR) of mid-scale crystalline silicon (c-Si) PV systems of the same manufacturer with different orientations and tilt angles in the same region for the duration of four years of outdoor exposure. Three commonly used statistical methods are deployed to calculate PLRs; seasonal and trend decomposition using locally weighted scatterplot smoothing (STL), classical seasonal decomposition (CSD) and year on year (YoY) methods coupled with various performance metrics, namely Performance ratio (PR), temperature corrected performance ratio TCPR) and weather corrected performance ratio suggested by National Renewable Energy Laboratory (NRELPR). It is found that PLRs of analyzed venues, Arazi, Arena and Stonite, with the YOY approach are −1.2%/year, −0.73%/year and −2.65%/year, respectivelty., respectively. Furthermore, STL method demonstrated PLRs of −0.69%/year, −0.65%/year and −2.91%/year, respectively. On the other hand, the CSD method generated positive PLRs for some inverters while aforementioned statistical approaches proposed PLRs close to −2%/year, making the CSD method inappropriate for use under a heavy soiling environment. Within two km distance, variations up-to four-fold in PLRs are recorded between the venues during analyzed period. Furthermore, variations in PLRs are more dependent on the statistical approach rather than the performance metric.


  • Open Access

    Analysis and optimizes of hybrid wind and solar photovoltaic generation system for off-grid small village

    by Nabaz Mohammedalı RASOOL, Serkan Abbasoğlu, Mehrshad Hashemipour

    As an effective means of providing power to remote and off-grid areas of developing countries, where rural electrification problems are most common, hybrid renewable energy systems are considered. HOMER simulated and configured wind turbine, photovoltaic, battery bank, and converter for the electricity demand of the Mander rural community, which has 37 families with household sizes of 7 members, as a remote village in Northern Iraq in this article. The hypothesis project was also evaluated using the parameters Net Present Value and Simple Payback Period. Daily energy consumption of 173,120 kWh and peak electricity consumption of 32,14 kW were measured for the outcome of the selected site. The proposed system produced 68,458 kWh/yr (13.7 percent) by the wind turbine, PV created 432,354 kWh/yr. (86.3 percent), and 265 operating batteries with a total operating cost (TOC) and costs of energy (COE) of $9,195 and 0.365 $/kWh, respectively. This survey emphasized the role of solar photovoltaic and wind turbine as hybrid renewable energy systems HRESs in the sustainable supply of electricity in rural areas of northern Iraq.


  • Open Access

    Energy and Exergy Analysis of Biogas-Powered Power Plant from Anaerobic Co-Digestion of Food and Animal Waste

    by Tonderai Linah Ruwa, Serkan Abbasoğlu, Ertan Akün

    Despite the research that has been conducted on biogas production from different waste materials through the anaerobic digestion process, there are still limited studies on their application for thermal systems. This paper presents an energetic and exergetic analysis of a multigeneration system comprising a micro-gas turbine, an organic Rankine cycle (ORC), an absorption chiller, and a water heater. It uses energy from biogas combustion produced through anaerobic co-digestion of food and animal waste. The reported biogas yield from 3 different studies was used in designing the fuel input for the system. The results showed that substrate combination of poultry manure and food waste (Biogas-A) needs 35.07 tons of volatile solids (tons-VS/day) of waste compared to 33.11 tons-VS/day for Biogas-B (Cattle manure and food waste), and 81.87 tons-VS/day for Biogas-C (swine manure and corn straw). For an increase in the methane content from 40% to 60%, the substrate amounts were reduced by 42.3% for Biogas-A, 45.3% for Biogas-B, and 42.7% for Biogas-C. Likewise, for an increase in recuperator effectiveness from 65% to 95%, the substrate amounts reduced by 31.6% for Biogas-A, 30.3% for Biogas-B, and 31.4% for Biogas-C. Increasing the ambient temperature was shown to have an adverse effect on the performance of the system. The energy efficiency of the system reduced from 47.8% to 39.8% and the exergy efficiency reduced from 63% to 60% for an increase from 5 °C to 40 °C. The total exergy destruction of the system also increased from 1760 kW to 1885 kW. The results from this study will give an overview for future practical design for electricity production from waste and the choice of biomass materials to be utilized.


  • Optimal Analysis of Entropy Generation and Heat Transfer in Parabolic Trough Collector Using Green-Synthesized TiO2/Water Nanofluids

    by Eric Chekwube Okonkwo, Muhammad Abid, Tahir A. H. Ratlamwala, Serkan Abbasoglu, Mustafa Dagbasi

    This study presents an experimental nanoparticle synthesis and the numerical analysis of a parabolic trough collector (PTC) operating with olive leaf synthesized TiO2/water nanofluid. The PTC is modeled after the LS-2 collector for various operating conditions. An analysis of the heat transfer and entropy generation in the PTC is carried out based on the first and second laws of thermodynamics for various parameters of nanoparticle volumetric concentration (0 ≤ φ ≤ 8%), mass flow rate (0.1 ≤ m˙ ≤ 1.1 kg/s), and inlet temperatures (350–450 K) under turbulent flow regime. The effect of these parameters is evaluated on the Nusselt number, thermal losses, heat convection coefficient, outlet temperature, pressure drop, entropy generation rate, and Bejan number. The results show that the values of the Nusselt number decrease with higher concentrations of the nanoparticles. Also, the addition of nanoparticles increases the heat convection coefficient of the nanofluid compared to water. The thermal efficiency of the system is improved with the use of the new nanofluid by 0.27% at flow rates of 0.1 kg/s. The entropy generation study shows that increasing the concentration of nanoparticles considerably decreases the rate of entropy generation in the system. It is also observed that increasing the volumetric concentration of nanoparticles at low mass flow rates has minimal effect on the rate of entropy generation. Finally, a correlation that provides a value of mass flow rate that minimizes the entropy generation rate is also presented for each values of inlet temperature and nanoparticle volumetric concentration.


  • Open Access

    Experimental Performance Analysis of Flat Plate Solar Collectors Using Different Nanofluids

    by Erdoğan Arıkan, Serkan Abbasoğlu, Mustafa Gazi

    In this study, the effect of Al2O3-water and ZnO-water nanofluids, with and without ethylene glycol (EG), on the efficiency of a flat plate solar collector was investigated. Two systems were set up and the nanofluids with and without EG were examined at the same time. The volume fraction of the nanoparticles and EG were 0.25% and 25%, respectively. The study was conducted on three mass flow rates: 0.05 kg/s, 0.07 kg/s, and 0.09 kg/s. ASHRAE Standard 93-2010 was used to calculate the efficiency. The efficiency of the system was compared to distilled water (base fluid). The results also showed that an increase in the mass flow rate and use of the EG increased efficiency. Furthermore, in comparison with the base fluid, the maximum increase in efficiency (15.13%) was observed at 0.09 kg/s when using a Al2O3-water/EG nanofluid.


  • Three-dimensional numerical simulation of crystal and crucible rotations during Czochralski growth of Ge_xSi_{1-x} single crystals

    by Serkan Abbasoğlu

    The influence of crystal and crucible rotations on the flow field and the radial segregation of silicon are predicted during the growth of Ge_xSi_{1-x} crystals by the Czochralski method under microgravity conditions. Time-dependent 3-dimensional numerical simulations are carried out to present the influence of several rotation rates on the radial segregation and flow fields during the growth of Ge_xSi_{1-x}. Thermal and solutal Marangoni convection are also considered during this study. Different crystal rotation rates varying between 0 and 30 rpm and stationary or -2 rpm crucible rotation rates are considered. The results show that the crystal and crucible rotation rates have significant influence on the flow field and radial segregation. It is clear that crystal and crucible rotations with an optimum rotation rate lead to good mixing along the growth interface and result in a crystal with a uniform concentration distribution.