Boming Tang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Boming Tang has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Xiaoyuan Zhang
School of Civil Engineering and Architecture, Zhejiang Key Laboratory of Green, Digital and Intelligent (GDI) Renovation for Urban Infrastructures, Zhejiang Sci-Tech University, Hangzhou, China
2 shared publications - Yu Zhang
Zhejiang Communication Construction Group Co., Ltd., Hangzhou 310051, China
2 shared publications - Cao Xinxin
College of Metropolitan Transportation, Beijing University of Technology, Beijing 100124, China
1 shared publication - Hui Yang
Zhejiang Communication Construction Group Co., Ltd., Hangzhou 310051, China
1 shared publication - Jingyi Xu
School of Civil Engineering and Architecture, Zhejiang Sci-Tech University, Hangzhou 310018, China
1 shared publication - Li Xiaolong
School of Materials Science and Engineering, Chongqing Jiaotong University, Chongqing 400074, China
1 shared publication
Latest Publications
- Open Access
Water Damage Resistance of Tuff Asphalt Mixtures with Admixtures Based on Surface Energy Theory
At present, tuff aggregates as asphalt pavement mixtures have insufficient water damage resistance; hence, modifying and evaluating the related properties of tuff asphalt mixtures are necessary. In this study, cement and a liquid antistripping agent were selected as admixtures, and tuff and limestone mixtures without admixtures were selected as control. The surface energy for the SBS-modified asphalt polymers and aggregates in the mixtures was evaluated by using surface energy theory. The adhesion work and the spalling work of the polymer–aggregate interface was calculated, and a factor k was proposed to predict the water damage resistance of the tuff mixture with admixtures. The prediction values were compared with those of the macroscopic water stability test for the mixture. The results of this research showed that the factor k after adding admixtures was improved, and the increase range was from 7.14% to 47.62%. The admixture scheme with the best improvement was that with 2% cement content, in which the k value increased by 21.57% and 47.62% compared with that of the limestone and tuff mixtures without admixtures, respectively. The tested water stability indexes and the predicted factor k under different admixture schemes exhibited a good positive correlation, and the correlation equations were obtained by linear fitting. Thus, it was feasible to use the factor k characterizing the water damage resistance of tuff mixtures using surface energy theory.
Open AccessWater Damage Resistance of Tuff Asphalt Mixtures with Admixtures Based on Surface Energy Theory
At present, tuff aggregates as asphalt pavement mixtures have insufficient water damage resistance; hence, modifying and evaluating the related properties of tuff asphalt mixtures are necessary. In this study, cement and a liquid antistripping agent were selected as admixtures, and tuff and limestone mixtures without admixtures were selected as control. The surface energy for the SBS-modified asphalt polymers and aggregates in the mixtures was evaluated by using surface energy theory. The adhesion work and the spalling work of the polymer–aggregate interface was calculated, and a factor k was proposed to predict the water damage resistance of the tuff mixture with admixtures. The prediction values were compared with those of the macroscopic water stability test for the mixture. The results of this research showed that the factor k after adding admixtures was improved, and the increase range was from 7.14% to 47.62%. The admixture scheme with the best improvement was that with 2% cement content, in which the k value increased by 21.57% and 47.62% compared with that of the limestone and tuff mixtures without admixtures, respectively. The tested water stability indexes and the predicted factor k under different admixture schemes exhibited a good positive correlation, and the correlation equations were obtained by linear fitting. Thus, it was feasible to use the factor k characterizing the water damage resistance of tuff mixtures using surface energy theory.
- Open Access
Laboratory Investigation of the Water Damage Resistance of Tuff Asphalt Mixture Modified with Additives
To improve the water damage resistance performance of a tuff asphalt mixture, a tuff mixture with cement and a liquid anti-stripping agent was used as the research object, and limestone and tuff mixtures without additives were selected as contrast samples. Through an improved boiling test and a water stability test before and after aging, the modification effect of the tuff mixture with additives of different types and contents on water damage resistance was evaluated to obtain the appropriate type and content of additives. On this basis, the other road performance measures of the selected mixture were further evaluated by immersion rutting and beam bending tests to verify the modification effect of the additive on the tuff mixture. Results showed that adding the appropriate cement content to the tuff mixture provided excellent resistance to the water damage effect. An optimal content of 2% cement additive in the mixture was obtained, and its high-temperature anti-rutting and low-temperature bending performance were also verified. Adhesion between tuff aggregates and asphalt polymer under water conditions was significantly improved and close to that of limestone aggregates. The modification effect of water stability after mixture aging was better than that of the anti-stripping agent. The residual stability and freeze–thaw splitting strength ratio of 2% cement content mixture were increased by about 21.5% and 16.7%, respectively, compared with those of the tuff mixture control.
Open AccessLaboratory Investigation of the Water Damage Resistance of Tuff Asphalt Mixture Modified with Additives
To improve the water damage resistance performance of a tuff asphalt mixture, a tuff mixture with cement and a liquid anti-stripping agent was used as the research object, and limestone and tuff mixtures without additives were selected as contrast samples. Through an improved boiling test and a water stability test before and after aging, the modification effect of the tuff mixture with additives of different types and contents on water damage resistance was evaluated to obtain the appropriate type and content of additives. On this basis, the other road performance measures of the selected mixture were further evaluated by immersion rutting and beam bending tests to verify the modification effect of the additive on the tuff mixture. Results showed that adding the appropriate cement content to the tuff mixture provided excellent resistance to the water damage effect. An optimal content of 2% cement additive in the mixture was obtained, and its high-temperature anti-rutting and low-temperature bending performance were also verified. Adhesion between tuff aggregates and asphalt polymer under water conditions was significantly improved and close to that of limestone aggregates. The modification effect of water stability after mixture aging was better than that of the anti-stripping agent. The residual stability and freeze–thaw splitting strength ratio of 2% cement content mixture were increased by about 21.5% and 16.7%, respectively, compared with those of the tuff mixture control.
- Open Access
- 11 May 2018
- Published by MDPI AG in Applied Sciences
- Vol. 8 (5) , 765
Investigation on Possibility of Waste Vegetable Oil Rejuvenating Aged Asphalt
In order to guarantee the service performance of recycling asphalt mixture with reclaimed asphalt pavement (RAP), asphalt rejuvenator shall be added. In the last five years, vegetable oil-based rejuvenators have received more and more attention due to their green and regenerative advantages. The object of this paper is to investigate the feasibility of rejuvenating aged asphalt by a kind of waste vegetable oil (W-oil). The effect of W-oil on the performance of aged asphalt is characterized by a safety property test, aging property test, and pavement performance tests; the pavement performance tests included traditional tests and a rheological test. The results show that both the safety property and aging property of rejuvenated asphalt with W-oil meet the specification requirements. According to the results of traditional performance indexes (i.e., penetration, soften point, and ductility), the pavement performance of rejuvenated asphalt can be recovered to the level of virgin asphalt. According to the results of performance indices obtained from the rheological test, the optimum dosage of W-oil is determined to be 13.4 wt %. Compared with virgin asphalt, the rutting property of rejuvenated asphalt is equivalent to that of virgin asphalt, and the workability is slightly poorer; however, the fatigue property and low temperature property have been significantly enhanced. W-oil cannot only improve the pavement performance of aged asphalt, it can also guarantee good safety property and aging property. Therefore, W-oil is of great potential to serve as an asphalt rejuvenator for rejuvenating aged asphalt.
- 11 May 2018
- Published by MDPI AG in Applied Sciences
- Vol. 8 (5) , 765
Open AccessInvestigation on Possibility of Waste Vegetable Oil Rejuvenating Aged Asphalt
In order to guarantee the service performance of recycling asphalt mixture with reclaimed asphalt pavement (RAP), asphalt rejuvenator shall be added. In the last five years, vegetable oil-based rejuvenators have received more and more attention due to their green and regenerative advantages. The object of this paper is to investigate the feasibility of rejuvenating aged asphalt by a kind of waste vegetable oil (W-oil). The effect of W-oil on the performance of aged asphalt is characterized by a safety property test, aging property test, and pavement performance tests; the pavement performance tests included traditional tests and a rheological test. The results show that both the safety property and aging property of rejuvenated asphalt with W-oil meet the specification requirements. According to the results of traditional performance indexes (i.e., penetration, soften point, and ductility), the pavement performance of rejuvenated asphalt can be recovered to the level of virgin asphalt. According to the results of performance indices obtained from the rheological test, the optimum dosage of W-oil is determined to be 13.4 wt %. Compared with virgin asphalt, the rutting property of rejuvenated asphalt is equivalent to that of virgin asphalt, and the workability is slightly poorer; however, the fatigue property and low temperature property have been significantly enhanced. W-oil cannot only improve the pavement performance of aged asphalt, it can also guarantee good safety property and aging property. Therefore, W-oil is of great potential to serve as an asphalt rejuvenator for rejuvenating aged asphalt.
- 16 January 2018
- Published by Springer Nature in Journal of Thermal Analysis and Calorimetry
- Vol. 132 (1) , 285-291
Utilization of pulverized strontium slag as the admixture of Portland cement
- 16 January 2018
- Published by Springer Nature in Journal of Thermal Analysis and Calorimetry
- Vol. 132 (1) , 285-291
Utilization of pulverized strontium slag as the admixture of Portland cement