Rodrigo Espinoza Maldonado
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Rodrigo Espinoza Maldonado has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Ariel Bobadilla-Moreno
Centre for Research in Construction Technologies, University of Bío-Bío, Collao Avenue #1202, Concepción 4030000, Chile
3 shared publications - Carlos Rubio-Bellido
Department of Building Construction II, University of Seville, 41012 Seville, Spain
2 shared publications - Alex Gonzalez Caceres
Chalmers University of Technology
1 shared publication - Carolina Recart
Research Center of Construction Technologies CITEC, Bío-Bío University, Av. Casilla 5C, Collao 1202, Concepción, Chile
1 shared publication - José Navarrete
Biodeterioration Laboratory, University of Bío-Bío, Collao Avenue #1202, Concepción 4030000, Chile
1 shared publication - Paula Herrera-Herrera
Biodeterioration Laboratory, University of Bío-Bío, Collao Avenue #1202, Concepción 4030000, Chile
1 shared publication
Latest Publications
- Open Access
Characterization of the Biodeterioration Caused by the Fungus Serpula lacrymans in Lignocellulosic Materials of Building Envelopes
Serpula lacrymans is considered the most aggressive and harmful brown-rot fungus for wooden buildings worldwide, and it has led to substantial economic losses due to the deterioration of wood and wooden-base structures. This study aims to connect the loss of parallel compressive strength and mass loss caused by the fungus Serpula lacrymans in different lignocellulosic materials commonly used in building envelopes in Chile. Samples suspected to contain the fungus Serpula lacrymans were gathered from four Chilean localities. From these samples, the fungus under investigation was isolated and identified in the laboratory. It was used to inoculate wood samples of radiata pine, impregnated radiata pine with chromated copper and arsenate (CCA) salts, raulí (Nothofagus alpina), oriented strand board (OSB), and plywood to evaluate compressive strength at 0, 30, 60, and 90 days. As expected, the best mass loss results were obtained in impregnated pine and plywood, with values of 0.8% and 2.5%, respectively. However, significant parallel compression strength losses of 42% and 28%, respectively, were observed. This study provides valuable information for the structural diagnosis of wood elements attacked by the fungus Serpula lacrymans.
Open AccessCharacterization of the Biodeterioration Caused by the Fungus Serpula lacrymans in Lignocellulosic Materials of Building Envelopes
Serpula lacrymans is considered the most aggressive and harmful brown-rot fungus for wooden buildings worldwide, and it has led to substantial economic losses due to the deterioration of wood and wooden-base structures. This study aims to connect the loss of parallel compressive strength and mass loss caused by the fungus Serpula lacrymans in different lignocellulosic materials commonly used in building envelopes in Chile. Samples suspected to contain the fungus Serpula lacrymans were gathered from four Chilean localities. From these samples, the fungus under investigation was isolated and identified in the laboratory. It was used to inoculate wood samples of radiata pine, impregnated radiata pine with chromated copper and arsenate (CCA) salts, raulí (Nothofagus alpina), oriented strand board (OSB), and plywood to evaluate compressive strength at 0, 30, 60, and 90 days. As expected, the best mass loss results were obtained in impregnated pine and plywood, with values of 0.8% and 2.5%, respectively. However, significant parallel compression strength losses of 42% and 28%, respectively, were observed. This study provides valuable information for the structural diagnosis of wood elements attacked by the fungus Serpula lacrymans.
- Open Access
Application of Environmental and Biological Frequency Indicators to Assess the Serpula lacrymans Fungus in Wooden Dwellings
High moisture content, low ventilation levels, and changes in the hygrothermal design of wooden dwellings could generate environmental conditions favorable for developing the rot fungus Serpula lacrymans, which is known as the most destructive fungus of its kind. The purpose of this research was to develop an experimental methodology to determine the conditions of the appearance of the fungus S. lacrymans, through in situ measurement of biological and environmental frequency indicators for wooden dwellings in South Central Chile. The referential standards for the appearance of the fungus were determined based on specialized literature and measurements of dwellings with and without deterioration. The frequency indicators for the appearance of the fungus defined and studied were as follows: frequency of air temperature FATs (%), frequency of relative humidity FRMs (%), frequency of ventilation rate FVRs (%), and rot fungus spore concentrations (CFU/pp). The methodology was validated by being measured in various enclosures and spaces under the floor in wooden dwellings in the cities of Valdivia and Temuco. The results confirmed the strong relationship between environmental relative humidity frequencies, ventilation levels, and spore concentration regarding the appearance of the fungus, where the growth dynamics cannot be separately explained without a previous analysis of the variables. In general, the dwellings most affected by the presence of the fungus had the greatest moisture levels, lower ventilation levels, and greater spore concentration. This study is the basis to diagnose the phenomena of the appearance of the rot fungus in wooden dwellings in climates favorable for its development.
Open AccessApplication of Environmental and Biological Frequency Indicators to Assess the Serpula lacrymans Fungus in Wooden Dwellings
High moisture content, low ventilation levels, and changes in the hygrothermal design of wooden dwellings could generate environmental conditions favorable for developing the rot fungus Serpula lacrymans, which is known as the most destructive fungus of its kind. The purpose of this research was to develop an experimental methodology to determine the conditions of the appearance of the fungus S. lacrymans, through in situ measurement of biological and environmental frequency indicators for wooden dwellings in South Central Chile. The referential standards for the appearance of the fungus were determined based on specialized literature and measurements of dwellings with and without deterioration. The frequency indicators for the appearance of the fungus defined and studied were as follows: frequency of air temperature FATs (%), frequency of relative humidity FRMs (%), frequency of ventilation rate FVRs (%), and rot fungus spore concentrations (CFU/pp). The methodology was validated by being measured in various enclosures and spaces under the floor in wooden dwellings in the cities of Valdivia and Temuco. The results confirmed the strong relationship between environmental relative humidity frequencies, ventilation levels, and spore concentration regarding the appearance of the fungus, where the growth dynamics cannot be separately explained without a previous analysis of the variables. In general, the dwellings most affected by the presence of the fungus had the greatest moisture levels, lower ventilation levels, and greater spore concentration. This study is the basis to diagnose the phenomena of the appearance of the rot fungus in wooden dwellings in climates favorable for its development.
- Open Access
- 10 October 2016
- Published by MDPI AG in Sustainability
- Vol. 8 (10) , 1000
Simple Tool to Evaluate Airtightness in Chilean Homes
Given the high impact that air leaks have on buildings’ energy expenses, most developed countries have set out norms which regulate their presence in homes. Chile will soon begin this process; however, the airtightness revision strategy in envelopes has not been resolved as of yet. This article presents a tool to Assess Airtightness in Design, EHeD. The software will allow predicting the performance of homes under the regulations which will be set out, aiding designers, builders or owners to make decisions when making changes to improve airtightness. EHeD has been validated through pressurization tests in diverse homes across the country, with results that are in line with expectations, thus validating its calculation model. The methodology considers three stages: determining the main factors that have an impact on the airtightness in Chilean homes, preparing an airtightness database for each component (wall, windows and doors) and preparing a calculation model that is integrated in an IT interface.
- 10 October 2016
- Published by MDPI AG in Sustainability
- Vol. 8 (10) , 1000
Open AccessSimple Tool to Evaluate Airtightness in Chilean Homes
Given the high impact that air leaks have on buildings’ energy expenses, most developed countries have set out norms which regulate their presence in homes. Chile will soon begin this process; however, the airtightness revision strategy in envelopes has not been resolved as of yet. This article presents a tool to Assess Airtightness in Design, EHeD. The software will allow predicting the performance of homes under the regulations which will be set out, aiding designers, builders or owners to make decisions when making changes to improve airtightness. EHeD has been validated through pressurization tests in diverse homes across the country, with results that are in line with expectations, thus validating its calculation model. The methodology considers three stages: determining the main factors that have an impact on the airtightness in Chilean homes, preparing an airtightness database for each component (wall, windows and doors) and preparing a calculation model that is integrated in an IT interface.