Xinghai Peng
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Xinghai Peng has a total of 42 co-authors. Here are the top co-authors by number of shared publications:
- Songtao Lv
National Engineering Research Center of Highway Maintenance Technology, Changsha University of Science & Technology, Changsha 410114, China
8 shared publications - Hongfu Liu
School of Traffic and Transportation Engineering, Changsha University of Science & Technology, Changsha 410114, China
3 shared publications - Changyu Pu
Hebei Provincial Communications Planning, Design and Research Institute Co., Ltd., Shijiazhuang 050090, China
2 shared publications - Dongzhao Jin
Michigan Technological Univ
2 shared publications - Huabao Ma
Hebei Provincial Communications Planning, Design and Research Institute Co., Ltd., Shijiazhuang 050090, China
2 shared publications - Huilin Meng
Hebei Provincial Communications Planning, Design and Research Institute Co., Ltd., Shijiazhuang 050090, China
2 shared publications
Latest Publications
- Open Access
Macro-Meso Characteristics and Damage Mechanism of Cement-Stabilized Macadam Under Freeze–Thaw Cycles and Scouring
This study quantifies the effects of freeze–thaw (FT) cycling and dynamic water scouring, and establishes links between mesoscale pore evolution and macroscale strength degradation in cement-stabilized macadam (CSM) bases. The objective is to provide quantitative indicators for durability design and non-destructive evaluation of CSM bases. First, laboratory tests were conducted to simulate alpine service conditions: CSM cylindrical specimens (Ø150 × 150 mm) with 4.5% cement content, cured for 28 days, were exposed to 0, 5, or 20 FT cycles (−18 °C for 16 h ↔ +25 °C for 8 h), followed by dynamic water scouring (0.5 MPa, 10 Hz) for 15, 30, or 60 min. Second, the resulting damage was tracked at two scales. Acoustic emission (AE) sensors monitored internal damage during subsequent splitting tests, while industrial computed tomography (CT) was used to scan selected specimens and quantify porosity, pore number, and average pore diameter. Third, gray relational analysis correlated pore structure parameters with strength loss. The results indicate that under 30 min of scouring, increasing FT cycles from 0 to 20 increased mass loss from 0.33% to 1.27% and reduced splitting strength by 28.8%. AE cumulative ringing count and energy decreased by 97.9% and 98.4%, respectively, indicating severe internal degradation. CT scans revealed porosity and pore count increased monotonically with FT cycles, while average pore diameter decreased (dominated by microcrack formation). Frost-heave pressure and cyclic suction enlarged edge pores and interconnected internal voids, accelerating erosion of cement paste. FT cycles compromise the cement–aggregate interfacial bond, thereby predisposing the matrix to accelerated deterioration under dynamic scouring; the ensuing evolution of pore structure emerges as the pivotal mechanism governing strength degradation. Average pore diameter exhibited the strongest correlation with splitting strength (r = 0.763), and its change was the primary driver of strength loss (r = 0.774). These findings facilitate optimizing cement dosage, validating non-destructive evaluation models for in-service base courses, and erosion durability of road base materials in permafrost regions.
Open AccessMacro-Meso Characteristics and Damage Mechanism of Cement-Stabilized Macadam Under Freeze–Thaw Cycles and Scouring
This study quantifies the effects of freeze–thaw (FT) cycling and dynamic water scouring, and establishes links between mesoscale pore evolution and macroscale strength degradation in cement-stabilized macadam (CSM) bases. The objective is to provide quantitative indicators for durability design and non-destructive evaluation of CSM bases. First, laboratory tests were conducted to simulate alpine service conditions: CSM cylindrical specimens (Ø150 × 150 mm) with 4.5% cement content, cured for 28 days, were exposed to 0, 5, or 20 FT cycles (−18 °C for 16 h ↔ +25 °C for 8 h), followed by dynamic water scouring (0.5 MPa, 10 Hz) for 15, 30, or 60 min. Second, the resulting damage was tracked at two scales. Acoustic emission (AE) sensors monitored internal damage during subsequent splitting tests, while industrial computed tomography (CT) was used to scan selected specimens and quantify porosity, pore number, and average pore diameter. Third, gray relational analysis correlated pore structure parameters with strength loss. The results indicate that under 30 min of scouring, increasing FT cycles from 0 to 20 increased mass loss from 0.33% to 1.27% and reduced splitting strength by 28.8%. AE cumulative ringing count and energy decreased by 97.9% and 98.4%, respectively, indicating severe internal degradation. CT scans revealed porosity and pore count increased monotonically with FT cycles, while average pore diameter decreased (dominated by microcrack formation). Frost-heave pressure and cyclic suction enlarged edge pores and interconnected internal voids, accelerating erosion of cement paste. FT cycles compromise the cement–aggregate interfacial bond, thereby predisposing the matrix to accelerated deterioration under dynamic scouring; the ensuing evolution of pore structure emerges as the pivotal mechanism governing strength degradation. Average pore diameter exhibited the strongest correlation with splitting strength (r = 0.763), and its change was the primary driver of strength loss (r = 0.774). These findings facilitate optimizing cement dosage, validating non-destructive evaluation models for in-service base courses, and erosion durability of road base materials in permafrost regions.
- Open Access
Investigation of Mix Proportion Optimization and Anti-Scouring Performance of Pervious Concrete Base
Internal drainage is crucial for preventing water damage in pavement structures. Pervious concrete is widely used in road projects due to its excellent drainage capacity, scour resistance, and durability. This study optimizes the mix design of pervious concrete by considering gradation (three levels), water-cement ratio (0.3, 0.35, 0.4), and target porosity (15%, 18%, 21%). The 7-day unconfined compressive strength, permeability coefficient, and elastic modulus were selected as evaluation indices. Response Surface Analysis (RSA) and Analysis of Variance (ANOVA) were applied to determine the optimal mix proportion. Scour resistance tests were conducted based on the optimal mix design to analyze the effects of scour time, frequency, and impact force on strength and modulus variation. The results indicate that the optimal mix ratio is Grade I, with a water-cement ratio of 0.35 and a target porosity of 18%. This yielded a 7-day compressive strength of 5.1 MPa, a rebound modulus of 2170.7 MPa, a permeability coefficient of 49 mL/s, and a hydraulic conductivity of 0.0027–0.0054 m2/s. Under standard scour conditions, compressive strength, splitting strength, dynamic rebound modulus, and splitting rebound modulus decreased by 16%, 33%, 40%, and 16%, respectively. Compared to cement-stabilized gravel (53% strength loss), pervious concrete exhibited lower strength loss (16%) due to its interconnected porosity, which mitigates internal water pressure during scouring. Overall, pervious concrete outperforms cement-stabilized gravel in mechanical properties and scour resistance, providing theoretical guidance for engineering applications.
Open AccessInvestigation of Mix Proportion Optimization and Anti-Scouring Performance of Pervious Concrete Base
Internal drainage is crucial for preventing water damage in pavement structures. Pervious concrete is widely used in road projects due to its excellent drainage capacity, scour resistance, and durability. This study optimizes the mix design of pervious concrete by considering gradation (three levels), water-cement ratio (0.3, 0.35, 0.4), and target porosity (15%, 18%, 21%). The 7-day unconfined compressive strength, permeability coefficient, and elastic modulus were selected as evaluation indices. Response Surface Analysis (RSA) and Analysis of Variance (ANOVA) were applied to determine the optimal mix proportion. Scour resistance tests were conducted based on the optimal mix design to analyze the effects of scour time, frequency, and impact force on strength and modulus variation. The results indicate that the optimal mix ratio is Grade I, with a water-cement ratio of 0.35 and a target porosity of 18%. This yielded a 7-day compressive strength of 5.1 MPa, a rebound modulus of 2170.7 MPa, a permeability coefficient of 49 mL/s, and a hydraulic conductivity of 0.0027–0.0054 m2/s. Under standard scour conditions, compressive strength, splitting strength, dynamic rebound modulus, and splitting rebound modulus decreased by 16%, 33%, 40%, and 16%, respectively. Compared to cement-stabilized gravel (53% strength loss), pervious concrete exhibited lower strength loss (16%) due to its interconnected porosity, which mitigates internal water pressure during scouring. Overall, pervious concrete outperforms cement-stabilized gravel in mechanical properties and scour resistance, providing theoretical guidance for engineering applications.
- Open Access
Fatigue Life of Pre-Cut Seam Asphalt Mixture Composite Beams: A Combined Study of Fatigue Damage Evolution and Reflective Cracking Extension
This study investigated the impact of reflective cracking on the fatigue performance of asphalt pavements after milling and resurfacing under various conditions. Fatigue life was assessed through four-point flexural fatigue tests, while the crack extension pattern of composite beams was analyzed by digital image correlation (DIC) at both macroscopic and microscopic scales. Evaluation parameters such as stress ratios, immersion time, porosity, and types of viscous oils were assessed. A fatigue life prediction model of composite beams was established, accounting for the combined influence of these factors. To enhance the accuracy of determining composite beam failure, the critical fatigue damage was calculated by defining the damage variable in terms of the dynamic modulus. A nonlinear fatigue damage model was proposed, incorporating this critical damage under the combined influence of various factors. Additionally, a modified logistic function model was developed to describe the relationship between crack extension and failure life under different stress ratios, porosities, and viscous layer oil conditions. It was found that the modulus decay curves and the crack extension curves intersected at different stress levels as the life ratio increased. At the intersection, the modulus ratios were consistently around 0.55, marking the transition of the specimen from a stable to an unstable state. Beyond this point, the crack rapidly propagated, leading to a sharp reduction in the modulus until the specimen ultimately failed. Our results provide a basis for timing and conservation decisions.
Open AccessFatigue Life of Pre-Cut Seam Asphalt Mixture Composite Beams: A Combined Study of Fatigue Damage Evolution and Reflective Cracking Extension
This study investigated the impact of reflective cracking on the fatigue performance of asphalt pavements after milling and resurfacing under various conditions. Fatigue life was assessed through four-point flexural fatigue tests, while the crack extension pattern of composite beams was analyzed by digital image correlation (DIC) at both macroscopic and microscopic scales. Evaluation parameters such as stress ratios, immersion time, porosity, and types of viscous oils were assessed. A fatigue life prediction model of composite beams was established, accounting for the combined influence of these factors. To enhance the accuracy of determining composite beam failure, the critical fatigue damage was calculated by defining the damage variable in terms of the dynamic modulus. A nonlinear fatigue damage model was proposed, incorporating this critical damage under the combined influence of various factors. Additionally, a modified logistic function model was developed to describe the relationship between crack extension and failure life under different stress ratios, porosities, and viscous layer oil conditions. It was found that the modulus decay curves and the crack extension curves intersected at different stress levels as the life ratio increased. At the intersection, the modulus ratios were consistently around 0.55, marking the transition of the specimen from a stable to an unstable state. Beyond this point, the crack rapidly propagated, leading to a sharp reduction in the modulus until the specimen ultimately failed. Our results provide a basis for timing and conservation decisions.
- Open Access
Comparative Study on the Dynamic Response of Asphalt Pavement Structures: Analysis Using the Classic Kelvin, Maxwell, and Three-Parameter Solid Models
This study addressed the complex problems of selecting a constitutive model to objectively characterize asphalt mixtures and accurately determine their viscoelastic properties, which are influenced by numerous variables. Inaccuracies in model or parameter determination can result in significant discrepancies between the calculated and measured results of the pavement’s structural dynamic response. To address this, the research utilized the physical engineering principles of asphalt pavement structure to perform dynamic modulus tests on three types of high-content rubberized asphalt mixtures (HCRAM) within the surface layer. The research aimed to investigate the influencing factors of the dynamic modulus and establish a comprehensive master curve. This study also critically evaluated the capabilities of three viscoelastic models—the three-parameter solid model, the classical Maxwell model, and the classical Kelvin model—in depicting the dynamic modulus of HCRAM. The findings indicated a negative correlation between the dynamic modulus of the asphalt mixture and temperature, while a positive association exists between the loading frequency and temperature, with the impact of the loading frequency diminishing as the temperature increases. Notably, the three-parameter solid model was identified as the most accurate in describing the viscoelastic properties of the HCRAM. Furthermore, the dynamic response calculations revealed that most indexes in the surface layer’s dynamic response are highest when evaluated using the three-parameter viscoelastic model, underscoring its potential to enhance the pavement performance’s predictive accuracy. This research provides valuable insights into optimizing the material performance and guiding the pavement design and maintenance strategies.
Open AccessComparative Study on the Dynamic Response of Asphalt Pavement Structures: Analysis Using the Classic Kelvin, Maxwell, and Three-Parameter Solid Models
This study addressed the complex problems of selecting a constitutive model to objectively characterize asphalt mixtures and accurately determine their viscoelastic properties, which are influenced by numerous variables. Inaccuracies in model or parameter determination can result in significant discrepancies between the calculated and measured results of the pavement’s structural dynamic response. To address this, the research utilized the physical engineering principles of asphalt pavement structure to perform dynamic modulus tests on three types of high-content rubberized asphalt mixtures (HCRAM) within the surface layer. The research aimed to investigate the influencing factors of the dynamic modulus and establish a comprehensive master curve. This study also critically evaluated the capabilities of three viscoelastic models—the three-parameter solid model, the classical Maxwell model, and the classical Kelvin model—in depicting the dynamic modulus of HCRAM. The findings indicated a negative correlation between the dynamic modulus of the asphalt mixture and temperature, while a positive association exists between the loading frequency and temperature, with the impact of the loading frequency diminishing as the temperature increases. Notably, the three-parameter solid model was identified as the most accurate in describing the viscoelastic properties of the HCRAM. Furthermore, the dynamic response calculations revealed that most indexes in the surface layer’s dynamic response are highest when evaluated using the three-parameter viscoelastic model, underscoring its potential to enhance the pavement performance’s predictive accuracy. This research provides valuable insights into optimizing the material performance and guiding the pavement design and maintenance strategies.
- Open Access
Research on the Modulus Decay Model under a Three-Dimensional Stress State of Asphalt Mixture during Fatigue Damage
Fatigue damage can develop within asphalt pavement due to the continuous impact of driving loads and natural elements. Understanding the process of asphalt mixtures’ fatigue damage is crucial for guiding the design, maintenance, and repair of asphalt pavement. This research aims to establish a model that characterizes the mixtures’ modulus decay under a three-dimensional (3-D) stress state. Firstly, asphalt mixes were subjected to direct tensile (DT), indirect tensile (IDT), unconfined compressive (UC) strength and fatigue tests, and the resulting data were analyzed. Then, modulus decay models under DT, IDT, and UC conditions were established, and the modulus decay patterns under the three loading modes were compared and analyzed. Finally, using the fatigue stress strength ratio Δ (a fatigue resistance index for asphalt mixtures that takes into account the impacts of stress state and loading rate), a unified characterization model for asphalt mixes’ modulus decay under a 3-D stress state was created. According to the study’s findings, asphalt mixes’ modulus decay during fatigue damage exhibits obvious nonlinear characteristics. While the asphalt mixes’ modulus decay law with various loading modalities is similar under the same conditions, the decay rate may differ. Essentially, the speed of the modulus decay of a certain asphalt mixture primarily depends on the value of Δ during service. A larger Δ indicates a faster modulus decay. This study offers a theoretical foundation for the conversion from material fatigue damage to structural fatigue damage, which is vital for enhancing the asphalt pavements’ construction quality and longevity.
Open AccessResearch on the Modulus Decay Model under a Three-Dimensional Stress State of Asphalt Mixture during Fatigue Damage
Fatigue damage can develop within asphalt pavement due to the continuous impact of driving loads and natural elements. Understanding the process of asphalt mixtures’ fatigue damage is crucial for guiding the design, maintenance, and repair of asphalt pavement. This research aims to establish a model that characterizes the mixtures’ modulus decay under a three-dimensional (3-D) stress state. Firstly, asphalt mixes were subjected to direct tensile (DT), indirect tensile (IDT), unconfined compressive (UC) strength and fatigue tests, and the resulting data were analyzed. Then, modulus decay models under DT, IDT, and UC conditions were established, and the modulus decay patterns under the three loading modes were compared and analyzed. Finally, using the fatigue stress strength ratio Δ (a fatigue resistance index for asphalt mixtures that takes into account the impacts of stress state and loading rate), a unified characterization model for asphalt mixes’ modulus decay under a 3-D stress state was created. According to the study’s findings, asphalt mixes’ modulus decay during fatigue damage exhibits obvious nonlinear characteristics. While the asphalt mixes’ modulus decay law with various loading modalities is similar under the same conditions, the decay rate may differ. Essentially, the speed of the modulus decay of a certain asphalt mixture primarily depends on the value of Δ during service. A larger Δ indicates a faster modulus decay. This study offers a theoretical foundation for the conversion from material fatigue damage to structural fatigue damage, which is vital for enhancing the asphalt pavements’ construction quality and longevity.
- Open Access
- 7 September 2023
- Published by MDPI AG in Preprints.org
Construction Risk Assessment of High-Fill Subgrade Using Combination Weighting Method Based on Game Theory
The construction safety risks (such as landslides or slumps) of the high-fill subgrade are characterized by uncertainty and variability. In order to ensure the construction safety of the high-fill subgrade of the expressway, a comprehensive risk assessment model of high-fill subgrade construction according to the combination weighting method based on game theory was established. Firstly, settlement rate, lateral differential settlement, horizontal displacement at the foot of the slope, deep horizontal displacement, and excess pore pressure were selected as evaluation indicators, and an evaluation index system of high-fill subgrade was constructed. Secondly, the subjective and objective weights were obtained via the analytic hierarchy process and entropy method. Furthermore, the optimized weights were obtained by introducing game theory, and the construction risk of the high-fill subgrade was evaluated and analyzed using the fuzzy comprehensive evaluation method. Finally, based on the high-fill section of the Zhijiang-Tongren Expressway in Hunan Province (China), the evaluation model was validated through field measurement data. The results show that the safety scores obtained using the three methods of analytic hierarchy process, entropy method, and combination weighting method based on game theory are similar. The combination weighting evaluation model can correct the evaluation result error caused by a single weight and avoid information delay caused by the manual processing and analysis of monitoring data. The high-fill subgrade safety evaluation grade based on the combination weighting method and game theory is consistent with the engineering situation, and its fault tolerance range is within 20%. The evaluation model proposed in this study can scientifically and effectively evaluate the safety risks of high-fill subgrade construction, significantly improving the safety and reliability during the construction process.
- 7 September 2023
- Published by MDPI AG in Preprints.org
Open AccessConstruction Risk Assessment of High-Fill Subgrade Using Combination Weighting Method Based on Game Theory
The construction safety risks (such as landslides or slumps) of the high-fill subgrade are characterized by uncertainty and variability. In order to ensure the construction safety of the high-fill subgrade of the expressway, a comprehensive risk assessment model of high-fill subgrade construction according to the combination weighting method based on game theory was established. Firstly, settlement rate, lateral differential settlement, horizontal displacement at the foot of the slope, deep horizontal displacement, and excess pore pressure were selected as evaluation indicators, and an evaluation index system of high-fill subgrade was constructed. Secondly, the subjective and objective weights were obtained via the analytic hierarchy process and entropy method. Furthermore, the optimized weights were obtained by introducing game theory, and the construction risk of the high-fill subgrade was evaluated and analyzed using the fuzzy comprehensive evaluation method. Finally, based on the high-fill section of the Zhijiang-Tongren Expressway in Hunan Province (China), the evaluation model was validated through field measurement data. The results show that the safety scores obtained using the three methods of analytic hierarchy process, entropy method, and combination weighting method based on game theory are similar. The combination weighting evaluation model can correct the evaluation result error caused by a single weight and avoid information delay caused by the manual processing and analysis of monitoring data. The high-fill subgrade safety evaluation grade based on the combination weighting method and game theory is consistent with the engineering situation, and its fault tolerance range is within 20%. The evaluation model proposed in this study can scientifically and effectively evaluate the safety risks of high-fill subgrade construction, significantly improving the safety and reliability during the construction process.
- Open Access
Performance Assessment of Self-Healing Polymer-Modified Bitumens by Evaluating the Suitability of Current Failure Definition, Failure Criterion, and Fatigue-Restoration Criteria
Fatigue cracking is a common form of flexible pavement distress, which generally starts and spreads through bitumen. To address this issue, self-healing elastomer (SHE) modified bitumens were elaborated to assess whether these novel materials can overcome the neat asphalt (NA) fatigue performance and whether the current failure definition, failure criterion, and fatigue-restoration criteria can fit their performance. All bitumens were subjected to short-term and long-term aging. Linear amplitude sweep (LAS) test, LAS with rest period (LASH), and simplified viscoelastic-continuum-damage (S-VECD) model were utilized to appraise the behavior of the mentioned bitumens. The results showed that maximum stored pseudo-strain energy (PSE) and tau () × N (number of loading cycles) failure definitions exhibited high efficiency to accommodate the fatigue life of NA and SHE-modified bitumens. Both failure criteria identified that SHE-modified bitumen (containing 1% of SHE) showed the highest increment of fatigue performance (67.1%) concerning NA. The failure criterion based on total released PSE, in terms of the area under the released PSE curve, was the only failure concept with high efficiency (R2 up to 0.999) to predict asphalt binder fatigue life. As well, the current framework to evaluate bitumen self-restoration failed to fully accommodate asphalt binder behavior, because bitumen with higher restoration could not exhibit greater fatigue performance. Consequently, a new procedure to assess this property including fatigue behavior was proposed, showing consistent results, and confirming that SHE-modified bitumen (containing 1% of SHE) exhibited the highest increment of fatigue performance (154.02%) after application of the rest period. Hence, the optimum SHE content in NA was 1%. Furthermore, it was found that a greater number of loading cycles to failure () did not ensure better fatigue performance and stored PSE influenced the bitumen fatigue behavior.Open AccessPerformance Assessment of Self-Healing Polymer-Modified Bitumens by Evaluating the Suitability of Current Failure Definition, Failure Criterion, and Fatigue-Restoration Criteria
Fatigue cracking is a common form of flexible pavement distress, which generally starts and spreads through bitumen. To address this issue, self-healing elastomer (SHE) modified bitumens were elaborated to assess whether these novel materials can overcome the neat asphalt (NA) fatigue performance and whether the current failure definition, failure criterion, and fatigue-restoration criteria can fit their performance. All bitumens were subjected to short-term and long-term aging. Linear amplitude sweep (LAS) test, LAS with rest period (LASH), and simplified viscoelastic-continuum-damage (S-VECD) model were utilized to appraise the behavior of the mentioned bitumens. The results showed that maximum stored pseudo-strain energy (PSE) and tau () × N (number of loading cycles) failure definitions exhibited high efficiency to accommodate the fatigue life of NA and SHE-modified bitumens. Both failure criteria identified that SHE-modified bitumen (containing 1% of SHE) showed the highest increment of fatigue performance (67.1%) concerning NA. The failure criterion based on total released PSE, in terms of the area under the released PSE curve, was the only failure concept with high efficiency (R2 up to 0.999) to predict asphalt binder fatigue life. As well, the current framework to evaluate bitumen self-restoration failed to fully accommodate asphalt binder behavior, because bitumen with higher restoration could not exhibit greater fatigue performance. Consequently, a new procedure to assess this property including fatigue behavior was proposed, showing consistent results, and confirming that SHE-modified bitumen (containing 1% of SHE) exhibited the highest increment of fatigue performance (154.02%) after application of the rest period. Hence, the optimum SHE content in NA was 1%. Furthermore, it was found that a greater number of loading cycles to failure () did not ensure better fatigue performance and stored PSE influenced the bitumen fatigue behavior. - Open Access
Study on Properties of Bone Glue/Polyurethane Composite Modified Asphalt and Its Mixture
Composite modification technology is widely used in the materials field. To enhance the property of polyurethane modified asphalt and realize its application in road engineering, the bone glue/polyurethane composite modified asphalt (CMA) was prepared using bone glue, polyurethane, and neat asphalt in this research. The bone glue content ranges 5–10%, that of the polyurethane is 1–5%. The relationship between the modifier’s content and the conventional properties and rheological properties of CMA was revealed by response surface methodology (RSM). The CMA performance was further verified under the optimal content of the bone glue and polyurethane. The differences of properties of styrene–butadienestyrene (SBS) modified asphalt mixture, neat asphalt mixture, and bone glue/polyurethane CMA mixture were compared and analyzed by using the pavement performance test. The results showed that the CMA’s conventional properties and rheological properties are improved. The optimal bone glue content and polyurethane content determined by RSM are 6.848% and 2.759%, respectively. The low-temperature crack resistance and water stability of the CMA mixture are enhanced, better than neat asphalt mixture and SBS modified asphalt mixture. The CMA mixture’s dynamic stability is 85% of SBS modified asphalt mixture, but it is 2.4 times of neat asphalt mixture. The result indicated that the bone glue/polyurethane CMA mixture still has certain advantages of high-temperature stability. In this research, the composite modification of bone glue and polyurethane can significantly enhance the characteristic of asphalt and asphalt mixture and provide a new method for applying and promoting polyurethane modified asphalt in road engineering.
Open AccessStudy on Properties of Bone Glue/Polyurethane Composite Modified Asphalt and Its Mixture
Composite modification technology is widely used in the materials field. To enhance the property of polyurethane modified asphalt and realize its application in road engineering, the bone glue/polyurethane composite modified asphalt (CMA) was prepared using bone glue, polyurethane, and neat asphalt in this research. The bone glue content ranges 5–10%, that of the polyurethane is 1–5%. The relationship between the modifier’s content and the conventional properties and rheological properties of CMA was revealed by response surface methodology (RSM). The CMA performance was further verified under the optimal content of the bone glue and polyurethane. The differences of properties of styrene–butadienestyrene (SBS) modified asphalt mixture, neat asphalt mixture, and bone glue/polyurethane CMA mixture were compared and analyzed by using the pavement performance test. The results showed that the CMA’s conventional properties and rheological properties are improved. The optimal bone glue content and polyurethane content determined by RSM are 6.848% and 2.759%, respectively. The low-temperature crack resistance and water stability of the CMA mixture are enhanced, better than neat asphalt mixture and SBS modified asphalt mixture. The CMA mixture’s dynamic stability is 85% of SBS modified asphalt mixture, but it is 2.4 times of neat asphalt mixture. The result indicated that the bone glue/polyurethane CMA mixture still has certain advantages of high-temperature stability. In this research, the composite modification of bone glue and polyurethane can significantly enhance the characteristic of asphalt and asphalt mixture and provide a new method for applying and promoting polyurethane modified asphalt in road engineering.
- Open Access
Laboratory Investigation of Rubberized Asphalt Using High-Content Rubber Powder
Rubberized asphalt (RA) has been successfully applied in road engineering due to its excellent performance; however, the most widely used rubber content is about 20%.To improve the content of waste rubber and ensure its performance, seven rubberized asphalts with different powder content were prepared by high-speed shearing. Firstly, penetration, softening point, and ductility tests were carried out to investigate the conventional physical features of high-content rubberized asphalt (HCRA). Then, the dynamic shear rheometer test (DSR) was conducted to estimate the high-temperature rheological properties. The bending beam rheometer test (BBR) was carried out to evaluate the low-temperature rheological performance. Finally, combined with the macroscopic performance test, the modification mechanism was revealed by the Fourier transform infrared reflection (FTIR) test, and scanning electron microscope (SEM) analysis was used to observe the microscopic appearance before and after aging. The results show that rubberized asphalt has excellent properties in high- and low-temperature conditions, and fatigue resistance is also outstanding compared with neat asphalt. As the crumb rubber content increases, it is evident that the 40% RA performance is the best. The low-temperature properties of HCRA are better than the traditional 20% rubberized asphalt. This study provides a full test foundation for the efficient utilization of HCRA in road engineering.
Open AccessLaboratory Investigation of Rubberized Asphalt Using High-Content Rubber Powder
Rubberized asphalt (RA) has been successfully applied in road engineering due to its excellent performance; however, the most widely used rubber content is about 20%.To improve the content of waste rubber and ensure its performance, seven rubberized asphalts with different powder content were prepared by high-speed shearing. Firstly, penetration, softening point, and ductility tests were carried out to investigate the conventional physical features of high-content rubberized asphalt (HCRA). Then, the dynamic shear rheometer test (DSR) was conducted to estimate the high-temperature rheological properties. The bending beam rheometer test (BBR) was carried out to evaluate the low-temperature rheological performance. Finally, combined with the macroscopic performance test, the modification mechanism was revealed by the Fourier transform infrared reflection (FTIR) test, and scanning electron microscope (SEM) analysis was used to observe the microscopic appearance before and after aging. The results show that rubberized asphalt has excellent properties in high- and low-temperature conditions, and fatigue resistance is also outstanding compared with neat asphalt. As the crumb rubber content increases, it is evident that the 40% RA performance is the best. The low-temperature properties of HCRA are better than the traditional 20% rubberized asphalt. This study provides a full test foundation for the efficient utilization of HCRA in road engineering.
- Open Access
Investigation of Strength and Fatigue Life of Rubber Asphalt Mixture
Strength and fatigue life are essential parameters of pavement structure design. To accurately determine the pavement structure resistance of rubber asphalt mixture, the strength tests at various temperatures, loading rate, and fatigue tests at different stress levels were conducted in this research. Based on the proposed experiments, the change law of rubber asphalt mixture strength with different temperatures and loading rates was revealed. The phenomenological fatigue equation of rubber asphalt mixture was established. The genetic algorithm optimized backpropagation neural network (GA-BPNN) is highly reliable for optimizing production processes in civil engineering, and it has a remarkable application effect. A GA-BPNN strength and fatigue life prediction model was created in this study. The reliability of the prediction model was verified through experiments. The results showed that the rubber asphalt mixture strength decreases and increases with the increase of temperature and loading rate, respectively. The goodness of fit of the rubber asphalt mixture strength and fatigue life prediction model based on the GA-BPNN could reach 0.989 and 0.998, respectively. The indicators of the fatigue life prediction model are superior to the conventional phenomenological fatigue equation model. The GA-BPNN provides an effective method for predicting the rubber asphalt mixture strength and fatigue life, which significantly improves the accuracy of the resistance design of the rubber asphalt pavement structure.
Open AccessInvestigation of Strength and Fatigue Life of Rubber Asphalt Mixture
Strength and fatigue life are essential parameters of pavement structure design. To accurately determine the pavement structure resistance of rubber asphalt mixture, the strength tests at various temperatures, loading rate, and fatigue tests at different stress levels were conducted in this research. Based on the proposed experiments, the change law of rubber asphalt mixture strength with different temperatures and loading rates was revealed. The phenomenological fatigue equation of rubber asphalt mixture was established. The genetic algorithm optimized backpropagation neural network (GA-BPNN) is highly reliable for optimizing production processes in civil engineering, and it has a remarkable application effect. A GA-BPNN strength and fatigue life prediction model was created in this study. The reliability of the prediction model was verified through experiments. The results showed that the rubber asphalt mixture strength decreases and increases with the increase of temperature and loading rate, respectively. The goodness of fit of the rubber asphalt mixture strength and fatigue life prediction model based on the GA-BPNN could reach 0.989 and 0.998, respectively. The indicators of the fatigue life prediction model are superior to the conventional phenomenological fatigue equation model. The GA-BPNN provides an effective method for predicting the rubber asphalt mixture strength and fatigue life, which significantly improves the accuracy of the resistance design of the rubber asphalt pavement structure.