Aigul Temerbekovna Bakesheva
Aigul Temerbekovna Bakesheva has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- R.S. Akpanbayev
K.I. Satbayev Kazakh National Research Technical University
5 shared publications SATBAYEV UNIVERSITY
3 shared publications- Gulnaz Zhaksylykovna Moldabayeva
Satbayev University
2 shared publications - M.N. Yelzhanova
K.I. Satbayev Kazakh National Research Technical University
2 shared publications N.N. Smagulov
2 shared publications- N.N. Smagulov
K.I. Satbayev Kazakh National Research Technical University
2 shared publications
Latest Publications
- 30 October 2026
- Published by Oil Research and Engineering Center of the National Engineering Academy of the Republic of Kazakhstan in Neft i Gaz
- Vol. 155 (5) , 261-272
REMAINING LIFE ASSESSMENT AND REPAIR PRIORITIZATION OF TRUNK GAS PIPELINES
The aim of this study is to develop a scientifically substantiated approach to incorporating design characteristics and indicators of the actual technical condition into the prediction of the remaining useful life and risk-based prioritization of repairs for gas transmission pipelines. The study is based on systems analysis, probabilistic reliability assessment methods, including FORM/ SORM and Monte Carlo simulation, as well as elements of risk analysis. As a result, an integrated conceptual framework and algorithm were developed to combine pipeline design parameters, including structural characteristics, steel properties, and section categories, with data obtained from in-line inspection, laboratory investigations, and monitoring of cathodic protection. It was established that determining the remaining useful life based on the time required to reach a specified reliability level, in combination with risk assessment, enables substantiated prioritization of pipeline sections and selection of appropriate repair strategies. The proposed approach provides a basis for developing digital passports for gas pipeline sections and can be integrated into integrity management systems, including the GasPipelineInsight software package, to improve the justification of maintenance planning and optimize the allocation of repair resources.
- 30 October 2026
- Published by Oil Research and Engineering Center of the National Engineering Academy of the Republic of Kazakhstan in Neft i Gaz
- Vol. 155 (5) , 261-272
REMAINING LIFE ASSESSMENT AND REPAIR PRIORITIZATION OF TRUNK GAS PIPELINES
The aim of this study is to develop a scientifically substantiated approach to incorporating design characteristics and indicators of the actual technical condition into the prediction of the remaining useful life and risk-based prioritization of repairs for gas transmission pipelines. The study is based on systems analysis, probabilistic reliability assessment methods, including FORM/ SORM and Monte Carlo simulation, as well as elements of risk analysis. As a result, an integrated conceptual framework and algorithm were developed to combine pipeline design parameters, including structural characteristics, steel properties, and section categories, with data obtained from in-line inspection, laboratory investigations, and monitoring of cathodic protection. It was established that determining the remaining useful life based on the time required to reach a specified reliability level, in combination with risk assessment, enables substantiated prioritization of pipeline sections and selection of appropriate repair strategies. The proposed approach provides a basis for developing digital passports for gas pipeline sections and can be integrated into integrity management systems, including the GasPipelineInsight software package, to improve the justification of maintenance planning and optimize the allocation of repair resources.
- 30 October 2026
- Published by Oil Research and Engineering Center of the National Engineering Academy of the Republic of Kazakhstan in Neft i Gaz
- Vol. 155 (5) , 216-227
CLASSIFICATION OF GAS PIPELINE TECHNICAL CONDITION USING IN-LINE INSPECTION DATA
The objective of the study is to develop and validate a model for classifying the technical condition of gas pipeline sections using in-line inspection (ILI) data and the Random Forest algorithm. Based on a dataset of 15,361 ILI records, a seven-parameter Random Forest model was developed in the GasPipelineInsight software; the data were stratified into an 80/20 train-test split and additionally evaluated using five-fold cross-validation. The classification accuracy on the test set was 98.31%, with a macro-F1 score of 0.92; the most significant contributions were made by allowable pressure, defect length and depth, the safe-service-life coefficient, and failure pressure. Data from Supervisory Control and Data Acquisition (SCADA) systems and the Internet of Things (IoT) were not used for model training or testing and are considered a prospective temporal layer for subsequent updating of the technical-condition forecast. The practical significance of the study lies in ranking pipeline sections according to potential risk and supporting decisions on inspection and repair.
- 30 October 2026
- Published by Oil Research and Engineering Center of the National Engineering Academy of the Republic of Kazakhstan in Neft i Gaz
- Vol. 155 (5) , 216-227
CLASSIFICATION OF GAS PIPELINE TECHNICAL CONDITION USING IN-LINE INSPECTION DATA
The objective of the study is to develop and validate a model for classifying the technical condition of gas pipeline sections using in-line inspection (ILI) data and the Random Forest algorithm. Based on a dataset of 15,361 ILI records, a seven-parameter Random Forest model was developed in the GasPipelineInsight software; the data were stratified into an 80/20 train-test split and additionally evaluated using five-fold cross-validation. The classification accuracy on the test set was 98.31%, with a macro-F1 score of 0.92; the most significant contributions were made by allowable pressure, defect length and depth, the safe-service-life coefficient, and failure pressure. Data from Supervisory Control and Data Acquisition (SCADA) systems and the Internet of Things (IoT) were not used for model training or testing and are considered a prospective temporal layer for subsequent updating of the technical-condition forecast. The practical significance of the study lies in ranking pipeline sections according to potential risk and supporting decisions on inspection and repair.
- 30 December 2025
- Published by Oil Research and Engineering Center of the National Engineering Academy of the Republic of Kazakhstan in Neft i Gaz
- Vol. 150 (6) , 184-194
Probabilistic-deterministic model for reliability assessment of main gas pipelines
This study is devoted to improving the reliability and operational safety of trunk gas pipelines by enhancing approaches to assessing their technical condition with consideration of pipe metal degradation. The paper proposes a probabilistic–deterministic model that enables quantitative evaluation of the failure-free operation probability of pipelines depending on the degree of corrosion wear, defect growth, and service life. Analysis of statistical data from international transmission network operators (EGIG, UKOPA), as well as failure statistics on Kazakhstani gas pipelines, shows that corrosion remains the key risk factor, accounting for up to 42% of failures, while defect intensity increases several times as the system ages. The model is based on inline inspection data, defectoscopy results, and the normative recommendations of ISO 14224 and DNV-RP-F101, allowing the real dynamics of material degradation to be incorporated. The application of the proposed approach is demonstrated using a section of the “Central Asia – Center” gas pipeline, where it is shown that accounting for corrosion growth kinetics reduces the calculated system reliability and decreases the predicted safe operation period by one quarter. The practical significance of the study lies in the applicability of the model for extending pipeline service life, justifying repair activities, optimizing diagnostic intervals, and improving the efficiency of technical condition management of gas transportation infrastructure. The results may be used by design organizations and trunk pipeline operators during the operational stage.
- 30 December 2025
- Published by Oil Research and Engineering Center of the National Engineering Academy of the Republic of Kazakhstan in Neft i Gaz
- Vol. 150 (6) , 184-194
Probabilistic-deterministic model for reliability assessment of main gas pipelines
This study is devoted to improving the reliability and operational safety of trunk gas pipelines by enhancing approaches to assessing their technical condition with consideration of pipe metal degradation. The paper proposes a probabilistic–deterministic model that enables quantitative evaluation of the failure-free operation probability of pipelines depending on the degree of corrosion wear, defect growth, and service life. Analysis of statistical data from international transmission network operators (EGIG, UKOPA), as well as failure statistics on Kazakhstani gas pipelines, shows that corrosion remains the key risk factor, accounting for up to 42% of failures, while defect intensity increases several times as the system ages. The model is based on inline inspection data, defectoscopy results, and the normative recommendations of ISO 14224 and DNV-RP-F101, allowing the real dynamics of material degradation to be incorporated. The application of the proposed approach is demonstrated using a section of the “Central Asia – Center” gas pipeline, where it is shown that accounting for corrosion growth kinetics reduces the calculated system reliability and decreases the predicted safe operation period by one quarter. The practical significance of the study lies in the applicability of the model for extending pipeline service life, justifying repair activities, optimizing diagnostic intervals, and improving the efficiency of technical condition management of gas transportation infrastructure. The results may be used by design organizations and trunk pipeline operators during the operational stage.
- 30 October 2024
- Published by Oil Research and Engineering Center of the National Engineering Academy of the Republic of Kazakhstan in Neft i Gaz
- Vol. 143 (5) , 179-191
Assessment of the safe operation of main gas pipelines
This work is devoted to improving the safety and reliability of the operation of main gas pipelines through a detailed assessment of their condition using the developed probabilistic deterministic model. The model allows you to calculate the probability of trouble-free operation of pipelines, which is critically important both at the design stage and during operation. The article analyzes defects that occur when using gas pipelines, including corrosion of pipe metal, which is one of the main causes of accidents, as shown by the example of technical investigation of incidents on Kazakh gas pipelines. Studies conducted by domestic companies have revealed that corrosion cracking due to the high corrosion activity of soils seriously threatens the safety of gas pipelines in Kazakhstan. The acceleration of the cracking process exacerbates the problem, making these damages especially dangerous for the structural integrity of metal pipelines and, accordingly, pose a significant challenge to the global gas transportation system. To combat these problems, the use of modern technologies is proposed, including robotic in-line diagnostics and remote methods for assessing the condition of gas pipelines, such as unmanned systems and aerospace research. These methods make it possible not only to predict corrosion and other types of damage on all types of gas pipelines, but also to detect cracks, ruptures and areas of gas leaks. In addition, they contribute to monitoring the environmental situation along the gas pipelines and provide complete and reliable information about the condition of not only control, but also all sections of the route. The application of these advanced diagnostic methods ensures the continuous and safe operation of the gas transmission system, ensuring a stable supply of natural gas to consumers, thereby increasing the overall safety and efficiency of gas supply.
- 30 October 2024
- Published by Oil Research and Engineering Center of the National Engineering Academy of the Republic of Kazakhstan in Neft i Gaz
- Vol. 143 (5) , 179-191
Assessment of the safe operation of main gas pipelines
This work is devoted to improving the safety and reliability of the operation of main gas pipelines through a detailed assessment of their condition using the developed probabilistic deterministic model. The model allows you to calculate the probability of trouble-free operation of pipelines, which is critically important both at the design stage and during operation. The article analyzes defects that occur when using gas pipelines, including corrosion of pipe metal, which is one of the main causes of accidents, as shown by the example of technical investigation of incidents on Kazakh gas pipelines. Studies conducted by domestic companies have revealed that corrosion cracking due to the high corrosion activity of soils seriously threatens the safety of gas pipelines in Kazakhstan. The acceleration of the cracking process exacerbates the problem, making these damages especially dangerous for the structural integrity of metal pipelines and, accordingly, pose a significant challenge to the global gas transportation system. To combat these problems, the use of modern technologies is proposed, including robotic in-line diagnostics and remote methods for assessing the condition of gas pipelines, such as unmanned systems and aerospace research. These methods make it possible not only to predict corrosion and other types of damage on all types of gas pipelines, but also to detect cracks, ruptures and areas of gas leaks. In addition, they contribute to monitoring the environmental situation along the gas pipelines and provide complete and reliable information about the condition of not only control, but also all sections of the route. The application of these advanced diagnostic methods ensures the continuous and safe operation of the gas transmission system, ensuring a stable supply of natural gas to consumers, thereby increasing the overall safety and efficiency of gas supply.
- 30 August 2024
- Published by Oil Research and Engineering Center of the National Engineering Academy of the Republic of Kazakhstan in Neft i Gaz
- No. 4,p. 70-79
Strategy for increasing the productivity of low-permeability reservoirs at the U-XIV horizon of the field in the Mangystau region
This article discusses the actual problems of developing residual reserves in mature fields with The article analyzes modern problems of development of residual oil reserves in mature fields with low reservoir properties. The field under study is characterized by multiple productive formations, tectonic disturbances and a variety of lithological characteristics in the intervals of the Jurassic productive strata. The field is characterized by structural complexity, heterogeneity of productive strata, various degrees of reserves development and a variety of residual balance reserves. The purpose of the work was to identify areas with low reservoir properties and assess the possibilities of optimizing their exploitation to improve the efficiency of oil production. To analyze current and predicted oil recovery factors (ORF), a calculation tool was developed using methods for evaluating displacement characteristics, including the Sazonov, Kambarov, Pirverdyan, Sipachev, Nazarov, Abyzbayev and Gaisin methods. These methods take into account various dependencies of the development parameters, which allows for more accurate prediction of oil recovery factors in the studied areas. The work also includes ranking of areas by residual recoverable reserves, production rates and projected growth of the oil recovery factor. Promising areas were identified for the construction of sector geological and hydrodynamic models (GHDMs), which allows for a more detailed assessment of opportunities to improve development efficiency. GHDMs were built and adapted for two selected areas with low reservoir properties, taking into account well parameters, development history, and reservoir filtration characteristics.
- 30 August 2024
- Published by Oil Research and Engineering Center of the National Engineering Academy of the Republic of Kazakhstan in Neft i Gaz
- No. 4,p. 70-79
Strategy for increasing the productivity of low-permeability reservoirs at the U-XIV horizon of the field in the Mangystau region
This article discusses the actual problems of developing residual reserves in mature fields with The article analyzes modern problems of development of residual oil reserves in mature fields with low reservoir properties. The field under study is characterized by multiple productive formations, tectonic disturbances and a variety of lithological characteristics in the intervals of the Jurassic productive strata. The field is characterized by structural complexity, heterogeneity of productive strata, various degrees of reserves development and a variety of residual balance reserves. The purpose of the work was to identify areas with low reservoir properties and assess the possibilities of optimizing their exploitation to improve the efficiency of oil production. To analyze current and predicted oil recovery factors (ORF), a calculation tool was developed using methods for evaluating displacement characteristics, including the Sazonov, Kambarov, Pirverdyan, Sipachev, Nazarov, Abyzbayev and Gaisin methods. These methods take into account various dependencies of the development parameters, which allows for more accurate prediction of oil recovery factors in the studied areas. The work also includes ranking of areas by residual recoverable reserves, production rates and projected growth of the oil recovery factor. Promising areas were identified for the construction of sector geological and hydrodynamic models (GHDMs), which allows for a more detailed assessment of opportunities to improve development efficiency. GHDMs were built and adapted for two selected areas with low reservoir properties, taking into account well parameters, development history, and reservoir filtration characteristics.
- 15 February 2024
- Published by Oil Research and Engineering Center of the National Engineering Academy of the Republic of Kazakhstan in Neft i Gaz
- Vol. 139 (1) , 137-154
FORECASTING ORF BY THE MARTOS METHOD AND THE STATISTICAL METHOD USING THE EXAMPLE OF DEPOSIT X
- 15 February 2024
- Published by Oil Research and Engineering Center of the National Engineering Academy of the Republic of Kazakhstan in Neft i Gaz
- Vol. 139 (1) , 137-154
FORECASTING ORF BY THE MARTOS METHOD AND THE STATISTICAL METHOD USING THE EXAMPLE OF DEPOSIT X
- 15 February 2024
- Published by Oil Research and Engineering Center of the National Engineering Academy of the Republic of Kazakhstan in Neft i Gaz
- Vol. 139 (1) , 39-51
ANALYSIS OF LABORATORY STUDIES OF HYDROPHOBIC EMULSIONS TO ENSURE WATER INSULATION WORK IN OIL FIELDS
This article is devoted to the research and implementation of methods for ensuring water insulation works (WIW) in the oil sector using hydrophobic emulsions. In the context of modern requirements for environmental safety and efficiency of production processes in the oil industry, where water can become a source of problems, the introduction of innovative materials and technologies plays an important role. Conducting laboratory studies of hydrophobic emulsions for WIW in the oil sector is a multiprocess approach, starting from the initial assessment of the chemical component and ending with thorough testing for compliance with the requirements of specific operating conditions. The analysis evaluates the physico-chemical properties of the emulsion, such as density, viscosity, pH level, degree of dispersion, as well as its adhesive and cohesive characteristics. Special attention is paid to the study of the surface properties of hydrophobic emulsions, since their ability to form stable water-repellent coatings directly affects the effectiveness of protection against water exposure. To do this, tests are carried out on wettability, contact angle, adhesion to various types of surfaces, which allows us to determine the optimal conditions for the use of emulsions in specific situations. The article describes the principles of action of hydrophobic emulsions in the context of waterproofing works, emphasizing their ability to create a protective barrier, preventing moisture penetration into oil facilities. The paper presents the results of laboratory studies demonstrating the effectiveness of the use of hydrophobic emulsions in various operating conditions. The article discusses the technical aspects of the use of hydrophobic emulsions in the WIW process, analyzes their resistance to various environmental factors, and also considers the prospects for the development of this technology in the oil industry. The results obtained can be useful for specialists dealing with water insulation in oil companies, as well as for the scientific and engineering community interested in the development of innovative technologies in the oil sector. The purpose of this article is to analyze laboratory research and provide recommendations on the use of polymer composition.
- 15 February 2024
- Published by Oil Research and Engineering Center of the National Engineering Academy of the Republic of Kazakhstan in Neft i Gaz
- Vol. 139 (1) , 39-51
ANALYSIS OF LABORATORY STUDIES OF HYDROPHOBIC EMULSIONS TO ENSURE WATER INSULATION WORK IN OIL FIELDS
This article is devoted to the research and implementation of methods for ensuring water insulation works (WIW) in the oil sector using hydrophobic emulsions. In the context of modern requirements for environmental safety and efficiency of production processes in the oil industry, where water can become a source of problems, the introduction of innovative materials and technologies plays an important role. Conducting laboratory studies of hydrophobic emulsions for WIW in the oil sector is a multiprocess approach, starting from the initial assessment of the chemical component and ending with thorough testing for compliance with the requirements of specific operating conditions. The analysis evaluates the physico-chemical properties of the emulsion, such as density, viscosity, pH level, degree of dispersion, as well as its adhesive and cohesive characteristics. Special attention is paid to the study of the surface properties of hydrophobic emulsions, since their ability to form stable water-repellent coatings directly affects the effectiveness of protection against water exposure. To do this, tests are carried out on wettability, contact angle, adhesion to various types of surfaces, which allows us to determine the optimal conditions for the use of emulsions in specific situations. The article describes the principles of action of hydrophobic emulsions in the context of waterproofing works, emphasizing their ability to create a protective barrier, preventing moisture penetration into oil facilities. The paper presents the results of laboratory studies demonstrating the effectiveness of the use of hydrophobic emulsions in various operating conditions. The article discusses the technical aspects of the use of hydrophobic emulsions in the WIW process, analyzes their resistance to various environmental factors, and also considers the prospects for the development of this technology in the oil industry. The results obtained can be useful for specialists dealing with water insulation in oil companies, as well as for the scientific and engineering community interested in the development of innovative technologies in the oil sector. The purpose of this article is to analyze laboratory research and provide recommendations on the use of polymer composition.
- 15 December 2023
- Published by Oil Research and Engineering Center of the National Engineering Academy of the Republic of Kazakhstan in Neft i Gaz
- Vol. 138 (6) , 101-110
SODIUM SILICATE GELS FOR WATER SHUT-OFF IN OIL RESERVOIRS
This work is dedicated to the problem of reducing the permeability of oil reservoirs to water. An experimental study was conducted, the results of which show that the gel based on liquid glass and hydrochloric acid is partially washed out from the model of water flooded oil reservoir under a pressure gradient of approximately 14 MPa/m, which in practice will lead to a decrease in efficiency. However, adding laponite nano-clay to the solution of liquid glass and hydrochloric acid allows solving this problem and achieving a 400-fold reduction in the permeability of the model of water flooded oil reservoir at a pressure gradient of approximately 33 MPa/m. This result can be explained by the fact that adding laponite to the solution of liquid glass and hydrochloric acid leads to an increase in the mechanical strength of the gel. For example, adding 1% laponite to the solution of liquid glass and hydrochloric acid increased the Young’s modulus from 550 to 1280 Pa. The results of this work demonstrate the potential application of liquid glass gels with fillers to increase the efficiency of plugging agents in operations to reduce water production in oil wells. Future research will focus on conducting filtration experiments on fractured models.
- 15 December 2023
- Published by Oil Research and Engineering Center of the National Engineering Academy of the Republic of Kazakhstan in Neft i Gaz
- Vol. 138 (6) , 101-110
SODIUM SILICATE GELS FOR WATER SHUT-OFF IN OIL RESERVOIRS
This work is dedicated to the problem of reducing the permeability of oil reservoirs to water. An experimental study was conducted, the results of which show that the gel based on liquid glass and hydrochloric acid is partially washed out from the model of water flooded oil reservoir under a pressure gradient of approximately 14 MPa/m, which in practice will lead to a decrease in efficiency. However, adding laponite nano-clay to the solution of liquid glass and hydrochloric acid allows solving this problem and achieving a 400-fold reduction in the permeability of the model of water flooded oil reservoir at a pressure gradient of approximately 33 MPa/m. This result can be explained by the fact that adding laponite to the solution of liquid glass and hydrochloric acid leads to an increase in the mechanical strength of the gel. For example, adding 1% laponite to the solution of liquid glass and hydrochloric acid increased the Young’s modulus from 550 to 1280 Pa. The results of this work demonstrate the potential application of liquid glass gels with fillers to increase the efficiency of plugging agents in operations to reduce water production in oil wells. Future research will focus on conducting filtration experiments on fractured models.
- 15 June 2019
- Published by National Academy of Sciences of the Republic of Kazakshtan in Series of Geology and Technical Sciences
- Vol. 3 (435) , 114-121
DETERMINATION OF NATURAL GAS LOSS VALUES BASED ON PHYSICAL SIMULATION OF LEAKAGES FROM THE PIPELINE TO THE MEDIA WITH SUPERATMOSPHERIC PRESSURE USING A VOLUMETRIC-TYPE EXPANDER
- 15 June 2019
- Published by National Academy of Sciences of the Republic of Kazakshtan in Series of Geology and Technical Sciences
- Vol. 3 (435) , 114-121
DETERMINATION OF NATURAL GAS LOSS VALUES BASED ON PHYSICAL SIMULATION OF LEAKAGES FROM THE PIPELINE TO THE MEDIA WITH SUPERATMOSPHERIC PRESSURE USING A VOLUMETRIC-TYPE EXPANDER