Ahmad Abu Hajer
Ahmad Abu Hajer has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Jason Trembly
Ohio Univ., Athens, OH (United States)
4 shared publications - Damilola Ayotunde Daramola
Northeastern University
3 shared publications - Andrew Kasick
Institute for Sustainable Energy and the Environment, Russ College of Engineering and Technology
1 shared publication Daniel Sellars
1 shared publicationDavid Bayless
1 shared publication- David J. Bayless
Department of Mechanical Engineering, Ohio University, Athens, USA
1 shared publication
Latest Publications
- Open Access
- 23 June 2025
- Published by Elsevier in Electrochimica Acta
- Vol. 537
Effect of sulfur poisoning on carbon dioxide electroreduction in solid oxide electrolyzer cells
- 23 June 2025
- Published by Elsevier in Electrochimica Acta
- Vol. 537
Open AccessEffect of sulfur poisoning on carbon dioxide electroreduction in solid oxide electrolyzer cells
- Open Access
- 6 March 2024
- Published by Elsevier in Electrochimica Acta
- Vol. 485
Carbon dioxide reduction in solid oxide electrolyzer cells utilizing nickel bimetallic alloys infiltrated into Gd0.1Ce0.9O1.95 (GDC10) scaffolds
- 6 March 2024
- Published by Elsevier in Electrochimica Acta
- Vol. 485
Open AccessCarbon dioxide reduction in solid oxide electrolyzer cells utilizing nickel bimetallic alloys infiltrated into Gd0.1Ce0.9O1.95 (GDC10) scaffolds
- Open Access
- 1 October 2023
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 170 (10) , 104509
Electro-Oxidative Dehydrogenation of Ethane to Ethylene Using Lanthanum-Strontium-Iron Oxide Perovskite Electrocatalysts
Developing alternative, industrially viable ethylene production routes has received important research attention. One chemical pathway of interest is the oxidative dehydrogenation (ODH) of ethane, although issues such as product selectivity, combustion hazards, and oxidizer supply have hindered the practical scale-up of this technology. The presented work describes the use of a solid oxide fuel cell (SOFC) platform employing lanthanum-strontium-iron oxide perovskite (La1-xSrxFeO3-δ , or LSFx) electrocatalysts to perform electrochemical-ODH (e-ODH), a process design that has the potential to address the challenges of ODH implementation. The effects of La and Sr stoichiometry, operating temperature, and current density are reported. The highest performance was observed using a La:Sr ratio of 0.50 (LSF0.50) at 750 °C and a current density of 0.50 A·cm−2, achieving an ethane conversion of 18.7 ± 0.3%, ethylene selectivity of 91.4 ± 1.9%, and ethylene yield of 17.1 ± 0.1%. These results demonstrate several potential advantages for utilizing a SOFC platform to perform e-ODH of ethane to ethylene.
- 1 October 2023
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 170 (10) , 104509
Open AccessElectro-Oxidative Dehydrogenation of Ethane to Ethylene Using Lanthanum-Strontium-Iron Oxide Perovskite Electrocatalysts
Developing alternative, industrially viable ethylene production routes has received important research attention. One chemical pathway of interest is the oxidative dehydrogenation (ODH) of ethane, although issues such as product selectivity, combustion hazards, and oxidizer supply have hindered the practical scale-up of this technology. The presented work describes the use of a solid oxide fuel cell (SOFC) platform employing lanthanum-strontium-iron oxide perovskite (La1-xSrxFeO3-δ , or LSFx) electrocatalysts to perform electrochemical-ODH (e-ODH), a process design that has the potential to address the challenges of ODH implementation. The effects of La and Sr stoichiometry, operating temperature, and current density are reported. The highest performance was observed using a La:Sr ratio of 0.50 (LSF0.50) at 750 °C and a current density of 0.50 A·cm−2, achieving an ethane conversion of 18.7 ± 0.3%, ethylene selectivity of 91.4 ± 1.9%, and ethylene yield of 17.1 ± 0.1%. These results demonstrate several potential advantages for utilizing a SOFC platform to perform e-ODH of ethane to ethylene.
- 1 December 2020
- Published by Elsevier in Bioresource Technology Reports
- Vol. 12
Challenges and process economics for algal carbon capture with novel integration: Hydrothermal carbonization
- 1 December 2020
- Published by Elsevier in Bioresource Technology Reports
- Vol. 12
Challenges and process economics for algal carbon capture with novel integration: Hydrothermal carbonization
- Open Access
- 24 June 2019
- Published by MDPI AG in Sustainability
- Vol. 11 (12) , 3454
Algal Remediation of Wastewater Produced from Hydrothermally Treated Septage
Hydrothermal carbonization (HTC) is a promising technology to convert wet wastes like septic tank wastes, or septage, to valuable platform chemical, fuels, and materials. However, the byproduct of HTC, process liquid, often contains large amount of nitrogen species (up to 2 g/L of nitrogen), phosphorus, and a variety of organic carbon containing compounds. Therefore, the HTC process liquid is not often treated at wastewater treatment plant. In this study, HTC process liquid was treated with algae as an alternative to commercial wastewater treatment. The HTC process liquid was first diluted and then used to grow Chlorella sp. over a short period of time (15 days). It was found that the algae biomass concentration increased by 644 mg/L over the course of 10 days, and which subsequently removed a majority of the nutrients in the HTC process liquid. Around 600 mg/L of algal biomass was collected in the process liquid at the end of treatment (day 15). Meanwhile, chemical oxygen demand (COD), total phosphorous, total Kheldjal nitrogen, and ammonia were reduced by 70.0, 77.7, 82.2, and 99.0% by fifteen days compared to the untreated wastewater, respectively. This study demonstrates that HTC process liquid can be treated by growing algae creating a potential replacement for expensive synthetic nutrient feeds for algal production.
- 24 June 2019
- Published by MDPI AG in Sustainability
- Vol. 11 (12) , 3454
Open AccessAlgal Remediation of Wastewater Produced from Hydrothermally Treated Septage
Hydrothermal carbonization (HTC) is a promising technology to convert wet wastes like septic tank wastes, or septage, to valuable platform chemical, fuels, and materials. However, the byproduct of HTC, process liquid, often contains large amount of nitrogen species (up to 2 g/L of nitrogen), phosphorus, and a variety of organic carbon containing compounds. Therefore, the HTC process liquid is not often treated at wastewater treatment plant. In this study, HTC process liquid was treated with algae as an alternative to commercial wastewater treatment. The HTC process liquid was first diluted and then used to grow Chlorella sp. over a short period of time (15 days). It was found that the algae biomass concentration increased by 644 mg/L over the course of 10 days, and which subsequently removed a majority of the nutrients in the HTC process liquid. Around 600 mg/L of algal biomass was collected in the process liquid at the end of treatment (day 15). Meanwhile, chemical oxygen demand (COD), total phosphorous, total Kheldjal nitrogen, and ammonia were reduced by 70.0, 77.7, 82.2, and 99.0% by fifteen days compared to the untreated wastewater, respectively. This study demonstrates that HTC process liquid can be treated by growing algae creating a potential replacement for expensive synthetic nutrient feeds for algal production.