JYJoshua T. Young

Joshua T. Young

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Joshua T. Young has a total of 17 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • SBS suppression using PRBS phase modulation with different orders

    by J. T. Young, Curtis Menyuk, Jonathan Hu

    The Brillouin instability (BI) caused by stimulated Brillouin scattering (SBS) can limit the output power of high-energy laser amplifiers. Pseudo-random bitstream (PRBS) phase modulation is an effective modulation technique to suppress BI. In this paper, we study the impact of the PRBS order and modulation frequency on the BI threshold for different Brillouin linewidths. PRBS phase modulation with a higher order will break the power into a larger number of frequency tones with a lower maximum power in each tone, leading to a higher BI threshold and a smaller tone spacing. However, the BI threshold may saturate when the tone spacing in the power spectra approaches the Brillouin linewidth. For a given Brillouin linewidth, our results allow us to determine the order of PRBS beyond which there is no further improvement in the threshold. When a specific threshold power is desired, the minimum PRBS order required decreases as the Brillouin linewidth increases. When the PRBS order is too large, the BI threshold deteriorates, and this deterioration occurs at smaller PRBS orders as the Brillouin linewidth increases. We investigate the dependence of the optimal PRBS order on the averaging time and fiber length, and we did not find a significant dependence. We also derive a simple equation that relates the BI threshold for different PRBS orders. Hence, the increase in BI threshold using an arbitrary order PRBS phase modulation may be predicted using the BI threshold from a lower PRBS order, which is computationally less time-consuming to compute.


  • Soliton glasses in Fabry-Perot resonators

    by Joshua T. Young, Matthew Puckett, Logan Courtright, Pradyoth H. Shandilya, Grace C. Keber, Steven Cundiff, Jianfeng Wu, Karl D. Nelson, Chad Hoyt, Jonathan Hu, et al.

    We study novel soliton glass frequency combs to a modified Lugiato-Lefever Equation (LLE) that include cross-phase modulation within a Fabry-Perot resonator. Soliton glasses are characterized by stable, spatially locked, phase-locked, and randomly spaced soliton pulses.

  • Tradeoff between the Brillouin and transverse mode instabilities in Yb-doped fiber amplifiers

    by J. T. Young, A. J. Goers, D. M. Brown, Michael Dennis, Kevin Lehr, Chengli Wei, Curtis Menyuk, Jonathan Hu

    The Brillouin instability (BI) due to stimulated Brillouin scattering (SBS) and the transverse (thermal) mode instability (TMI) due to stimulated thermal Rayleigh scattering (STRS) limit the achievable power in high-power lasers and amplifiers. The pump power threshold for BI increases as the core diameter increases, but the threshold for TMI may decrease as the core diameter increases. In this paper, we use a multi-time-scale approach to simultaneously model BI and TMI, which gives us the ability to find the fiber diameter with the highest power threshold. We formulate the equations to compare the thresholds of the combined and individual TMI and BI models. At the pump power threshold and below, there is a negligible difference between the full and individual models, as BI and TMI are not strong enough to interact with each other. The highest pump threshold occurs at the optimal core size of 43 µm for the simple double-clad geometry that we considered. We found that both effects contribute equally to the threshold, and the full BI and TMI model yields a similar threshold as the BI or TMI model alone. However, once the reflectivity is sufficiently large, we find in the full BI and TMI model that BI may trigger TMI and reduce the TMI threshold to a value lower than is predicted in simulations with TMI alone. This result cannot be predicted by models that consider BI and TMI separately. Our approach can be extended to more complex geometries and used for their optimization.


  • Open Access

    Increasing the power threshold in fiber amplifiers considering both the transverse mode and Brillouin instabilities

    by Joshua T. Young, Curtis R. Menyuk, Chengli Wei, Jonathan Hu

    We study the Brillouin instability and the transverse mode instability in a combined computational model for fiber amplifiers. We find the optimal core diameter, which leads to the highest power threshold and output power.

  • Open Access

    Comparison of the full model and phase-matched model for transverse mode instability

    by Joshua T. Young, Curtis R. Menyuk, Jonathan Hu

    We compare the full model and phase-matched model for the transverse mode instability. The phase-matched model, which requires less longitudinal discretization with less computational time, predicts the same refractive index gratings as the full model.

  • Mode coupling at avoided crossings in slab waveguides with comparison to optical fibers: tutorial

    by J. T. Young, Chengli Wei, Curtis Menyuk, Jonathan Hu

    Avoided crossings are important in many waveguides and resonators. That is particularly the case in modern-day solid-core and air-core optical fibers that often have a complex geometry. The study of mode coupling at avoided crossings often leads to a complicated analysis. In this tutorial, we aim to explain the basic features of avoided crossings in a simple slab waveguide structure so that the modes can be found analytically with simple sinusoidal and exponential forms. We first review coupled-mode theory for the guided mode in a slab waveguide, which has a higher index in the core. We study the effective index of the guided true mode for a five-layer slab waveguide including two core layers with higher indices compared to the indices in the three cladding layers. Then, we study the same structure by using the overlap between approximate modes confined in the two individual core slabs. When the two individual core slabs are not near each other, the avoided crossing using the true modes within the two-slab waveguide agrees well with the results using the overlap between the two approximate modes. We also study coupled-mode theory and avoided crossings for leaky modes in an antiresonant slab waveguide. We obtain good agreement between the results using the true leaky mode and the results using the overlap between approximate modes. We then discuss examples of avoided crossings in solid-core and air-core optical fibers. We describe the similarities and differences between the optical fibers and simple slab waveguides that we have analyzed in detail.


  • Accurate and efficient modeling of the transverse mode instability in high energy laser amplifiers

    by Curtis Menyuk, J. T. Young, Jonathan Hu, A. J. Goers, D. M. Brown, Michael Dennis

    We study the transverse mode instability (TMI) in the limit where a single higher-order mode (HOM) is present. We demonstrate that when the beat length between the fundamental mode and the HOM is small compared to the length scales on which the pump amplitude and the optical mode amplitudes vary, TMI is a three-wave mixing process in which the two optical modes beat with the phase-matched component of the index of refraction that is induced by the thermal grating. This limit is the usual limit in applications, and in this limit TMI is identified as a stimulated thermal Rayleigh scattering (STRS) process. We demonstrate that a phase-matched model that is based on the three-wave mixing equations can have a large computational advantage over current coupled mode methods that must use longitudinal step sizes that are small compared to the beat length.


  • Temperature sensor based on liquid-filled negative curvature optical fibers

    by Chengli Wei, Joshua T. Young, Curtis R. Menyuk, Jonathan Hu

    We computationally investigate a novel temperature sensor that uses liquid-filled negative curvature optical fibers. Both the core and cladding tubes are infiltrated with a liquid that has a temperature-sensitive refractive index. The high-loss resonant wavelengths are sensitive to the liquid’s change of the refractive index. The refractive index of the liquid decreases and the resonant wavelengths increase when the temperature increases. The temperature sensitivity is 1.1 nm/$\,^{\circ }\mathrm {C}$ as the temperature changes from 15$\,^{\circ }\mathrm {C}$ to 35$\,^{\circ }\mathrm {C}$ using negative curvature optical fibers that are filled with liquid that has a refractive index of 1.36. The temperature sensitivity rises from 0.82 nm/$\,^{\circ }\mathrm {C}$ to 2.48 nm/$\,^{\circ }\mathrm {C}$ when different liquids are used with a refractive index from 1.30 to 1.42, and we use the third resonant peak in the fiber. The temperature sensitivity can be increased by 38$\%$ by using the second resonant peak. An analytical formula for the temperature sensitivity is derived, which can give an accurate prediction for the temperature sensitivity of this sensor. The relatively large size of the air core and cladding tubes, on the order of 10 $\mu$m, should make the infiltration procedure easier compared to other photonic crystal fibers with smaller holes. With temperature sensors based on liquid-filled negative curvature optical fibers, there is no need for any special post-processing, such as the liquid filling of selected air holes or inscription of fiber gratings.