Hadi Mohammadigoushki
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Hadi Mohammadigoushki has a total of 42 co-authors. Here are the top co-authors by number of shared publications:
Jamel Ali
Department of Chemical and Biomedical Engineering, Florida State University, Tallahassee, Florida-32310, USA
10 shared publicationsMunir Humayun
Department of Chemical and Biomedical Engineering, Florida State University, Tallahassee, Florida-32310, USA
9 shared publicationsTheo Siegrist
Department of Chemical and Biomedical Engineering, FAMU-FSU College of Engineering, Tallahassee, FL 32310, USA
8 shared publicationsPeter Rassolov
Department of Chemical and Biomedical Engineering FAMU-FSU College of Engineering 32310 Tallahassee FL USA
6 shared publicationsShijian Wu
Department of Chemical and Biomedical Engineering, FAMU-FSU College of Engineering, Tallahassee, FL 32310, USA
6 shared publicationsAlfredo Scigliani
3 shared publications
Latest Publications
- Open Access
- 8 July 2026
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1038, A42
Drag and yielding of rotating bodies in yield-stress fluids
We investigate the settling dynamics of rotating objects in a yield-stress fluid by combining controlled experiments with numerical simulations. Experiments were conducted using cylinders and spheres of varying surface roughness, rotated within a Helmholtz coil and immersed in a Carbopol-based yield-stress fluid. Complementary numerical simulations employed a viscoplastic Herschel–Bulkley model to capture the coupled effects of sedimentation and rotation. To parametrise the problem, we define a dimensionless rotational velocity ModifyingAbove upper Omega With caret $\hat {\varOmega }$ to characterise rotation and the Bingham number ( italic Bi $\textit{Bi}$ ) to characterise sedimentation. Measurements of the drag coefficient show a strong dependence on both surface roughness and rotation rate. The plastic drag coefficient is found to be inversely related to ModifyingAbove upper Omega With caret $\hat {\varOmega }$ at fixed italic Bi $\textit{Bi}$ , with rotation effectively reducing the resistance to motion. Flow visualisation reveals that enhanced rotation generates a plastic deformation zone in the orthogonal plane and promotes wall slip; while at low ModifyingAbove upper Omega With caret $\hat {\varOmega }$ , a stagnation-point flow develops in the wake, gradually weakening and disappearing as ModifyingAbove upper Omega With caret $\hat {\varOmega }$ increases. In addition, the plastic drag coefficient decreases with increasing italic Bi $\textit{Bi}$ and approaches an asymptotic plateau at high italic Bi $\textit{Bi}$ . Numerical simulations reproduce the general scaling of drag with ModifyingAbove upper Omega With caret $\hat {\varOmega }$ and italic Bi $\textit{Bi}$ , but consistently underpredict experimental values, likely due to wall slip and nonlinear effects such as the stagnation-point flow not present in the model. The onset of sedimentation (yield limit) was also measured and found to increase with increasing rotation and to depend on surface roughness. Finally, simulations highlight scaling relations for drag coefficient providing new insight into the interplay of sedimentation, rotation and viscoplastic rheology.- 8 July 2026
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1038, A42
Open AccessDrag and yielding of rotating bodies in yield-stress fluids
We investigate the settling dynamics of rotating objects in a yield-stress fluid by combining controlled experiments with numerical simulations. Experiments were conducted using cylinders and spheres of varying surface roughness, rotated within a Helmholtz coil and immersed in a Carbopol-based yield-stress fluid. Complementary numerical simulations employed a viscoplastic Herschel–Bulkley model to capture the coupled effects of sedimentation and rotation. To parametrise the problem, we define a dimensionless rotational velocity ModifyingAbove upper Omega With caret $\hat {\varOmega }$ to characterise rotation and the Bingham number ( italic Bi $\textit{Bi}$ ) to characterise sedimentation. Measurements of the drag coefficient show a strong dependence on both surface roughness and rotation rate. The plastic drag coefficient is found to be inversely related to ModifyingAbove upper Omega With caret $\hat {\varOmega }$ at fixed italic Bi $\textit{Bi}$ , with rotation effectively reducing the resistance to motion. Flow visualisation reveals that enhanced rotation generates a plastic deformation zone in the orthogonal plane and promotes wall slip; while at low ModifyingAbove upper Omega With caret $\hat {\varOmega }$ , a stagnation-point flow develops in the wake, gradually weakening and disappearing as ModifyingAbove upper Omega With caret $\hat {\varOmega }$ increases. In addition, the plastic drag coefficient decreases with increasing italic Bi $\textit{Bi}$ and approaches an asymptotic plateau at high italic Bi $\textit{Bi}$ . Numerical simulations reproduce the general scaling of drag with ModifyingAbove upper Omega With caret $\hat {\varOmega }$ and italic Bi $\textit{Bi}$ , but consistently underpredict experimental values, likely due to wall slip and nonlinear effects such as the stagnation-point flow not present in the model. The onset of sedimentation (yield limit) was also measured and found to increase with increasing rotation and to depend on surface roughness. Finally, simulations highlight scaling relations for drag coefficient providing new insight into the interplay of sedimentation, rotation and viscoplastic rheology. - Open Access
- 1 June 2026
- Published by Royal Society of Chemistry (RSC) in Soft Matter
- Vol. 22 (28) , 4784-4799
Dynamics of weakly magnetic nanoparticle suspensions near a magnetized sphere
We report experimental and multiphysics simulation studies of magnetophoretic transport and capture of nanoparticles around a magnetized sphere under high-gradient magnetic fields.
- 1 June 2026
- Published by Royal Society of Chemistry (RSC) in Soft Matter
- Vol. 22 (28) , 4784-4799
Open AccessDynamics of weakly magnetic nanoparticle suspensions near a magnetized sphere
We report experimental and multiphysics simulation studies of magnetophoretic transport and capture of nanoparticles around a magnetized sphere under high-gradient magnetic fields.
- Open Access
- 21 January 2026
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 28 (7) , 4554-4568
Magnetically assisted separation of weakly magnetic metal ions in porous media. Part 1: experiments
We report experiments on the magnetophoresis of paramagnetic (MnCl 2 ) and diamagnetic (ZnCl 2 ) metal ion species in porous media under the influence of a non-uniform magnetic field generated by a permanent magnet.
- 21 January 2026
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 28 (7) , 4554-4568
Open AccessMagnetically assisted separation of weakly magnetic metal ions in porous media. Part 1: experiments
We report experiments on the magnetophoresis of paramagnetic (MnCl 2 ) and diamagnetic (ZnCl 2 ) metal ion species in porous media under the influence of a non-uniform magnetic field generated by a permanent magnet.
- Open Access
- 18 November 2025
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 28 (9) , 5701-5714
Magnetically assisted separation of weakly magnetic metal ions in porous media. Part 2: numerical simulations
We present a numerical investigation of the magnetophoresis of metal ions in porous media under static, nonuniform magnetic fields. The multiphysics simulations couple momentum transport, mass diffusion, and magnetic field equations, with the porous medium modeled using two distinct approaches: a Stokes-based formulation incorporating effective diffusivity, and a Brinkman-based formulation that explicitly accounts for permeability and medium-induced drag. Comparison with recent experimental data\ [Nwachuwku \textit{et al. Submitted}, 2025] reveals that the Stokes model partially fails to capture key trends, while the Brinkman model, with permeability accurately reproduces observed transport behavior on various porous media. Our simulations predict that both paramagnetic (MnCl$_2$) and diamagnetic (ZnCl$_2$) ions may form field-induced clusters under magnetic gradients over a range of concentrations of 1mM-100mM and magnetic field gradients of up to 100 T$^2$/m. The dominant driving force is found to be the magnetic gradient (Kelvin) force, while the paramagnetic force from concentration gradients contributes minimally. In binary mixtures, hydrodynamic interactions between paramagnetic and diamagnetic clusters significantly alter transport dynamics. Specifically, paramagnetic clusters can pull diamagnetic clusters along the magnetic field gradient, enhancing diamagnetic migration and suppressing the motion of paramagnetic species. These findings highlight the importance of porous media modeling and interspecies interactions in predicting magnetophoretic transport of ionic mixtures.
- 18 November 2025
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 28 (9) , 5701-5714
Open AccessMagnetically assisted separation of weakly magnetic metal ions in porous media. Part 2: numerical simulations
We present a numerical investigation of the magnetophoresis of metal ions in porous media under static, nonuniform magnetic fields. The multiphysics simulations couple momentum transport, mass diffusion, and magnetic field equations, with the porous medium modeled using two distinct approaches: a Stokes-based formulation incorporating effective diffusivity, and a Brinkman-based formulation that explicitly accounts for permeability and medium-induced drag. Comparison with recent experimental data\ [Nwachuwku \textit{et al. Submitted}, 2025] reveals that the Stokes model partially fails to capture key trends, while the Brinkman model, with permeability accurately reproduces observed transport behavior on various porous media. Our simulations predict that both paramagnetic (MnCl$_2$) and diamagnetic (ZnCl$_2$) ions may form field-induced clusters under magnetic gradients over a range of concentrations of 1mM-100mM and magnetic field gradients of up to 100 T$^2$/m. The dominant driving force is found to be the magnetic gradient (Kelvin) force, while the paramagnetic force from concentration gradients contributes minimally. In binary mixtures, hydrodynamic interactions between paramagnetic and diamagnetic clusters significantly alter transport dynamics. Specifically, paramagnetic clusters can pull diamagnetic clusters along the magnetic field gradient, enhancing diamagnetic migration and suppressing the motion of paramagnetic species. These findings highlight the importance of porous media modeling and interspecies interactions in predicting magnetophoretic transport of ionic mixtures.
- Open Access
Magnetically Assisted Separation of Weakly Magnetic Metal Ions in Porous Media. Part 2: Numerical Simulations
We present a numerical investigation of the magnetophoresis of metal ions in porous media under static, nonuniform magnetic fields. The multiphysics simulations couple momentum transport, mass diffusion, and magnetic field equations, with the porous medium modeled using two distinct approaches: a Stokes-based formulation incorporating effective diffusivity, and a Brinkman-based formulation that explicitly accounts for permeability and medium-induced drag. Comparison with recent experimental data [Nwachuwku et al. Submitted, 2025] reveals that the Stokes model partially fails to capture key trends, while the Brinkman model, with permeability accurately reproduces observed transport behavior on various porous media. Our simulations predict that both paramagnetic (MnCl2) and diamagnetic (ZnCl2) ions may form field-induced clusters under magnetic gradients over a range of concentrations of 1mM-100mM and magnetic field gradients of up to 100 T2/m. The dominant driving force is found to be the magnetic gradient (Kelvin) force, while the paramagnetic force from concentration gradients contributes minimally. In binary mixtures, hydrodynamic interactions between paramagnetic and diamagnetic clusters significantly alter transport dynamics. Specifically, paramagnetic clusters can pull diamagnetic clusters along the magnetic field gradient, enhancing diamagnetic migration and suppressing the motion of paramagnetic species. These findings highlight the importance of porous media modeling and interspecies interactions in predicting magnetophoretic transport of ionic mixtures.
Open AccessMagnetically Assisted Separation of Weakly Magnetic Metal Ions in Porous Media. Part 2: Numerical Simulations
We present a numerical investigation of the magnetophoresis of metal ions in porous media under static, nonuniform magnetic fields. The multiphysics simulations couple momentum transport, mass diffusion, and magnetic field equations, with the porous medium modeled using two distinct approaches: a Stokes-based formulation incorporating effective diffusivity, and a Brinkman-based formulation that explicitly accounts for permeability and medium-induced drag. Comparison with recent experimental data [Nwachuwku et al. Submitted, 2025] reveals that the Stokes model partially fails to capture key trends, while the Brinkman model, with permeability accurately reproduces observed transport behavior on various porous media. Our simulations predict that both paramagnetic (MnCl2) and diamagnetic (ZnCl2) ions may form field-induced clusters under magnetic gradients over a range of concentrations of 1mM-100mM and magnetic field gradients of up to 100 T2/m. The dominant driving force is found to be the magnetic gradient (Kelvin) force, while the paramagnetic force from concentration gradients contributes minimally. In binary mixtures, hydrodynamic interactions between paramagnetic and diamagnetic clusters significantly alter transport dynamics. Specifically, paramagnetic clusters can pull diamagnetic clusters along the magnetic field gradient, enhancing diamagnetic migration and suppressing the motion of paramagnetic species. These findings highlight the importance of porous media modeling and interspecies interactions in predicting magnetophoretic transport of ionic mixtures.
- Open Access
Magnetically Assisted Separation of Weakly Magnetic Metal Ions in Porous Media.Part 1: Experiments
We report experiments on the magnetophoresis of paramagnetic (MnCl2) and diamagnetic (ZnCl2) metal ions in porous media under the influence of a non-uniform magnetic field generated by a permanent magnet. Experiments were carried out in a range of initial ion concentrations (1-100 mM), porous media particle sizes (63 um and 500 um), and varying mixture ratios of metal ion concentrations. For single-ion magnetophoresis, paramagnetic MnCl2 migrated toward the magnet surface, with an enrichment of approximately 2-4 percent near regions of high magnetic field. Conversely, diamagnetic ZnCl2 moved away from regions of highest magnetic field gradients, with depletion levels of 0.5-1.8 percent relative to the initial concentration. Our results demonstrate that magnetophoresis is directly proportional to porous media particle size, increasing with larger particle sizes, a trend attributed to the reduced drag forces experienced by the ions in media with larger particles. Interestingly, in binary mixtures, both MnCl2 and ZnCl2 migrated toward regions of highest magnetic field, contrary to their individual behaviors. The magnetophoretic effect of MnCl2 was diminished with increasing concentrations of ZnCl2, indicating interactions between the two ions. These findings suggest that both metal ions undergo field-induced cluster formation, with cluster sizes in the micrometer range, in both single and binary ion systems. In binary mixtures, the two ions appear to interact, potentially forming mixed clusters containing both MnCl2 and ZnCl2.
Open AccessMagnetically Assisted Separation of Weakly Magnetic Metal Ions in Porous Media.Part 1: Experiments
We report experiments on the magnetophoresis of paramagnetic (MnCl2) and diamagnetic (ZnCl2) metal ions in porous media under the influence of a non-uniform magnetic field generated by a permanent magnet. Experiments were carried out in a range of initial ion concentrations (1-100 mM), porous media particle sizes (63 um and 500 um), and varying mixture ratios of metal ion concentrations. For single-ion magnetophoresis, paramagnetic MnCl2 migrated toward the magnet surface, with an enrichment of approximately 2-4 percent near regions of high magnetic field. Conversely, diamagnetic ZnCl2 moved away from regions of highest magnetic field gradients, with depletion levels of 0.5-1.8 percent relative to the initial concentration. Our results demonstrate that magnetophoresis is directly proportional to porous media particle size, increasing with larger particle sizes, a trend attributed to the reduced drag forces experienced by the ions in media with larger particles. Interestingly, in binary mixtures, both MnCl2 and ZnCl2 migrated toward regions of highest magnetic field, contrary to their individual behaviors. The magnetophoretic effect of MnCl2 was diminished with increasing concentrations of ZnCl2, indicating interactions between the two ions. These findings suggest that both metal ions undergo field-induced cluster formation, with cluster sizes in the micrometer range, in both single and binary ion systems. In binary mixtures, the two ions appear to interact, potentially forming mixed clusters containing both MnCl2 and ZnCl2.
- Open Access
Helical Locomotion in Yield Stress Fluids
We report three stages for locomotion of a helical swimmer in yield stress fluids. In the first stage, the swimmer must overcome material's yield strain to generate rotational motion. However, exceeding the first threshold is not sufficient for locomotion. Only when the viscous forces are sufficiently strong to plastically deform the material to a finite distance away from the swimmer, net locomotion will occur. Once locomotion is underway in the third stage, the yield stress retards swimming at small pitch angles. Conversely, at large pitch angles, yield stress dominates the flow by enhancing swimming speed. Flow visualizations reveal a highly localized flow near the swimmer in yield stress fluids.
Open AccessHelical Locomotion in Yield Stress Fluids
We report three stages for locomotion of a helical swimmer in yield stress fluids. In the first stage, the swimmer must overcome material's yield strain to generate rotational motion. However, exceeding the first threshold is not sufficient for locomotion. Only when the viscous forces are sufficiently strong to plastically deform the material to a finite distance away from the swimmer, net locomotion will occur. Once locomotion is underway in the third stage, the yield stress retards swimming at small pitch angles. Conversely, at large pitch angles, yield stress dominates the flow by enhancing swimming speed. Flow visualizations reveal a highly localized flow near the swimmer in yield stress fluids.
- 28 August 2025
- Published by Society of Rheology in Journal of Rheology
- Vol. 69 (5) , 759-774
A study of nonlinear flows and shear banding in wormlike micelles under varying elasticity, flow curvature, and surfactant chemistry
We report the flow dynamics of two shear-banding wormlike micellar solutions with distinct surfactant chemistries in a Taylor–Couette (TC) setup following a startup shear. The solutions, formulated with CTAB/NaSal and CPyCl/NaSal, exhibit comparable bulk rheology and equilibrium microstructural properties. By varying the TC gap size, we systematically examine the elasticity number over a range of 1.28×105–4.47×106, while flow curvature spans from 0.022 to 0.171. Under a step shear into the stress plateau, both solutions exhibit a pronounced stress overshoot that intensifies with increasing the elasticity number and flow curvature, followed by the development of growing flow heterogeneities. Beyond a critical threshold of elasticity number and curvature, the CTAB/NaSal solution exhibits transient flow reversal, whereas the CPyCl/NaSal solution, despite developing similar heterogeneities, does not undergo flow reversal under any tested conditions. Additionally, the quasisteady velocity profiles are significantly influenced by elasticity number and flow curvature. Wall slip at the outer cylinder exhibits a nonmonotonic dependence on these parameters: it is negligible at low values of elasticity number and flow curvature, peaks at intermediate values, and diminishes at high values. Our findings highlight how surfactant chemistry, elasticity number, and flow curvature control shear-banding flows in wormlike micelles.
- 28 August 2025
- Published by Society of Rheology in Journal of Rheology
- Vol. 69 (5) , 759-774
A study of nonlinear flows and shear banding in wormlike micelles under varying elasticity, flow curvature, and surfactant chemistry
We report the flow dynamics of two shear-banding wormlike micellar solutions with distinct surfactant chemistries in a Taylor–Couette (TC) setup following a startup shear. The solutions, formulated with CTAB/NaSal and CPyCl/NaSal, exhibit comparable bulk rheology and equilibrium microstructural properties. By varying the TC gap size, we systematically examine the elasticity number over a range of 1.28×105–4.47×106, while flow curvature spans from 0.022 to 0.171. Under a step shear into the stress plateau, both solutions exhibit a pronounced stress overshoot that intensifies with increasing the elasticity number and flow curvature, followed by the development of growing flow heterogeneities. Beyond a critical threshold of elasticity number and curvature, the CTAB/NaSal solution exhibits transient flow reversal, whereas the CPyCl/NaSal solution, despite developing similar heterogeneities, does not undergo flow reversal under any tested conditions. Additionally, the quasisteady velocity profiles are significantly influenced by elasticity number and flow curvature. Wall slip at the outer cylinder exhibits a nonmonotonic dependence on these parameters: it is negligible at low values of elasticity number and flow curvature, peaks at intermediate values, and diminishes at high values. Our findings highlight how surfactant chemistry, elasticity number, and flow curvature control shear-banding flows in wormlike micelles.
- 14 July 2025
- Published by American Physical Society (APS) in Physical Review Fluids
- Vol. 10 (7)
Magnetophoresis of paramagnetic nanoparticles in suspensions under magnetic field gradients
- 14 July 2025
- Published by American Physical Society (APS) in Physical Review Fluids
- Vol. 10 (7)
Magnetophoresis of paramagnetic nanoparticles in suspensions under magnetic field gradients
- Open Access
A Study of Non-linear Flows and Shear Banding in Wormlike Micelles Under Varying Elasticity, Flow Curvature, and Surfactant Chemistry
We report the flow dynamics of two shear-banding wormlike micellar solutions with distinct surfactant chemistries in a Taylor-Couette (TC) setup following a startup shear. The solutions, formulated with CTAB/NaSal and CPyCl/NaSal, exhibit comparable bulk rheology and equilibrium microstructural properties. By varying the TC gap size, we systematically examine elasticity number over a range of 128000-4470000, while flow curvature spans from 0.022 to 0.171. Under a step shear into the stress plateau, both solutions exhibit a pronounced stress overshoot that intensifies with increasing elasticity number and flow curvature, followed by the development of growing flow heterogeneities. Beyond a critical threshold of elasticity number and curvature, the CTAB/NaSal solution exhibits transient flow reversal, whereas the CPyCl/NaSal solution, despite developing similar heterogeneities, does not undergo flow reversal under any tested conditions. We hypothesize that this difference arises from the stronger electrostatic repulsions between CPyCl head groups due to their larger size, coupled with the higher dissociation rate of Cl counterions. Additionally, the quasi-steady velocity profiles are significantly influenced by elasticity number and flow curvature. Wall slip at the outer cylinder exhibits a non-monotonic dependence on these parameters: it is negligible at low values of elasticity number and flow curvature, peaks at intermediate values, and diminishes at high values. Our findings highlight how surfactant chemistry, elasticity number, and flow curvature control shear-banding flows in wormlike micelles.
Open AccessA Study of Non-linear Flows and Shear Banding in Wormlike Micelles Under Varying Elasticity, Flow Curvature, and Surfactant Chemistry
We report the flow dynamics of two shear-banding wormlike micellar solutions with distinct surfactant chemistries in a Taylor-Couette (TC) setup following a startup shear. The solutions, formulated with CTAB/NaSal and CPyCl/NaSal, exhibit comparable bulk rheology and equilibrium microstructural properties. By varying the TC gap size, we systematically examine elasticity number over a range of 128000-4470000, while flow curvature spans from 0.022 to 0.171. Under a step shear into the stress plateau, both solutions exhibit a pronounced stress overshoot that intensifies with increasing elasticity number and flow curvature, followed by the development of growing flow heterogeneities. Beyond a critical threshold of elasticity number and curvature, the CTAB/NaSal solution exhibits transient flow reversal, whereas the CPyCl/NaSal solution, despite developing similar heterogeneities, does not undergo flow reversal under any tested conditions. We hypothesize that this difference arises from the stronger electrostatic repulsions between CPyCl head groups due to their larger size, coupled with the higher dissociation rate of Cl counterions. Additionally, the quasi-steady velocity profiles are significantly influenced by elasticity number and flow curvature. Wall slip at the outer cylinder exhibits a non-monotonic dependence on these parameters: it is negligible at low values of elasticity number and flow curvature, peaks at intermediate values, and diminishes at high values. Our findings highlight how surfactant chemistry, elasticity number, and flow curvature control shear-banding flows in wormlike micelles.