FWFrank Willems

Frank Willems

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Frank Willems has a total of 118 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Optimal cost-emission trade-off for plug-in hybrid electric vehicles around zero emission zones using a supervisory energy and emissions management strategy

    by André Nakaema Aronis, Frank Willems, Frank Kupper, Benjamín Pla

    The growing call for pollution-free environments has prompted the creation of zero-emission zones (ZEZs) around the world. For regional and national transport, plug-in hybrid electric vehicle (PHEV) are an attractive option, which also offer ZE driving. To address the PHEV challenges of sufficient ZE driving range and of meeting real-world emission targets outside the ZEZs, this work proposes an adaptive supervisory control strategy, which minimizes the total operational costs while complying with tailpipe [ ] emissions constraints. It combines a Modular Energy Management Strategy (MEMS), for cost-optimal power-split, with an Integrated Emission Management (IEM) strategy for determining the cost-optimal air path setting of the internal combustion engine. A real-time implementable, optimal control strategy is derived based on Pontryagin’s Minimum Principle. To determine the optimal selection of the co-states used in this strategy, a numerical optimization is performed for different route segments and real-world cycles. This study demonstrates that PHEVs can successfully be operated around ZEZs. The best performance is realized with an adaptive supervisory control strategy with different co-states per route segment; compared to the standard strategy with fixed co-states, this proposed strategy was able to achieve cost and [ ] emission reductions of up to 10% and 22%, respectively, for the studied real-world cycles.


  • Open Access

    Data-Based In-Cylinder Pressure Model with Cyclic Variations for Combustion Control: An RCCI Engine Application

    by Maarten Vlaswinkel, Frank Willems

    Cylinder-pressure-based control is a key enabler for advanced pre-mixed combustion concepts. In addition to guaranteeing robust and safe operation, it allows for cylinder pressure and heat release shaping. This requires fast control-oriented combustion models. Over the years, mean-value models have been proposed that can predict combustion metrics (e.g., gross indicated mean effective pressure (IMEPg), or the crank angle where 50% of the total heat is released (CA50)) or models that predict the full in-cylinder pressure. However, these models are not able to capture cycle-to-cycle variations. The inclusion of the cycle-to-cycle variations is important in the control design for combustion concepts, like reactivity-controlled compression ignition, that can suffer from large cycle-to-cycle variations. In this study, the in-cylinder pressure and cycle-to-cycle variations are modelled using a data-based approach. The in-cylinder conditions and fuel settings are the inputs to the model. The model combines principal component decomposition and Gaussian process regression. A detailed study is performed on the effects of the different hyperparameters and kernel choices. The approach is applicable to any combustion concept, but is most valuable for advance combustion concepts with large cycle-to-cycle variation. The potential of the proposed approach is successfully demonstrated for a reactivity-controlled compression ignition engine running on diesel and E85. The average prediction error of the mean in-cylinder pressure over a complete combustion cycle is 0.051 bar and of the corresponding mean cycle-to-cycle variation is 0.24 bar2. This principal-component-decomposition-based approach is an important step towards in-cylinder pressure shaping. The use of Gaussian process regression provides important information on cycle-to-cycle variation and provides next-cycle control information on safety and performance criteria.


  • Open Access

    Data-Based In-Cylinder Pressure Model with Cyclic Variations for Combustion Control: A RCCI Engine Application

    by Maarten Vlaswinkel, Frank Willems

    Cylinder pressure-based control is a key enabler for advanced pre-mixed combustion concepts. Besides guaranteeing robust and safe operation, it allows for cylinder pressure and heat release shaping. This requires fast control-oriented combustion models. Over the years, mean-value models have been proposed that can predict combustion measures (e.g., Gross Indicated Mean Effective Pressure, or the crank angle where 50% of the total heat is released) or models that predict the full in-cylinder pressure. However, these models are not able to capture cyclic variations. This is important in the control design for combustion concepts, like Reactivity Controlled Compression Ignition, that can suffer from large cyclic variations. In this study, the in-cylinder pressure and cyclic variation are modelled using a data-based approach. The model combines Principle Component Decomposition and Gaussian Process Regression. A detailed study is performed on the effects of the different hyperparameters and kernel choices. The approach is applicable to any combustion concept, but most valuable for advance combustion concepts with large cyclic variation. The potential of the proposed approach is demonstrated for an Reactivity Controlled Compression Ignition engine running on Diesel and E85. The prediction quality of the evaluated combustion measures has an overall accuracy of 13.5% and 65.5% in mean behaviour and standard deviation, respectively. The peak-pressure rise-rate is traditionally hard to predict, in the proposed model it has an accuracy of 22.7% and 96.4% in mean behaviour and standard deviation, respectively. This Principle Component Decomposition-based approach is an important step towards in-cylinder pressure shaping. The use of Gaussian Process Regression provides important information on cyclic variation and provides next-cycle controls information on safety and performance criteria.

  • Open Access

    Data-Driven Air-Fuel Path Control Design for Robust RCCI Engine Operation

    by Jan Verhaegh, Frank Kupper, Frank Willems

    Reactivity controlled compression ignition (RCCI) is a highly efficient and clean combustion concept, which enables the use of a wide range of renewable fuels. Consequently, this promising dual fuel combustion concept is of great interest for realizing climate neutral future transport. RCCI is very sensitive for operating conditions and requires advanced control strategies to guarantee stable and safe operation. For real-world RCCI implementation, we face control challenges related to transients and varying ambient conditions. Currently, a multivariable air–fuel path controller that can guarantee robust RCCI engine operation is lacking. In this work, we present a RCCI engine controller, which combines static decoupling and a diagonal MIMO feedback controller. For control design, a frequency domain-based approach is presented, which explicitly deals with cylinder-to-cylinder variations using data-driven, cylinder-individual combustion models. This approach enables a systematic trade-off between fast and robust performance and gives clear design criteria for stable operation. The performance of the developed multivariable engine controller is demonstrated on a six-cylinder diesel-E85 RCCI engine. From experimental results, it is concluded that the RCCI engine controller accurately tracks the five desired combustion and air path parameters, simultaneously. For the studied transient cycle, this results in 12.8% reduction in NOx emissions and peak in-cylinder pressure rise rates are reduced by 3.8 bar/deg CA. Compared to open-loop control, the stable and safe operating range is increased from 25 °C up to 35 °C intake manifold temperature and maximal load range is increased by 14.7% up to BMEP = 14.8 bar.


  • Cycle-to-Cycle Multipulse Fuel-Injection Control for Advanced Diesel Combustion in Changing and Disturbed Operating Points

    by Xi Luo, Martin Großbichler, Harald Waschl, M. C. F. Donkers, Bram de Jager, Frank Willems

    When controlled in an open-loop fashion, both stationary and dynamical diesel engine performance can deteriorate due to disturbances. Although cycle-to-cycle fuel injection control has the potential of reducing the performance degradation by manipulating the fueling profile in real time, this potential has not been thoroughly studied. This is especially true for multipulse fuel injection, due to the lack of a controller design method with closed-loop reference tracking performance guarantees. In this paper, we introduce a systematic design method for multivariable cycle-to-cycle fuel injection control. The design method is based on several local linearizations to address varying combustion behavior due to different engine speeds, torques, and disturbances. This leads to a controller that is robust with respect to all the local linearizations. Experimental results show that the controller works well in both stationary and dynamical operating conditions, and has fast dynamical performance (settling time less than 1.5 (s)). Moreover, experimental data show that cycle-to-cycle fuel injection control is robust against the uncertainties introduced by disturbed rail pressure and swirl valve position.