Min-Gyu Kim
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Min-Gyu Kim has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
- Ji-Hong Li
Autonomous Systems R&D Division, Korea Institute of Robotics & Technology Convergence, Jigok-Ro 39, Nam-gu, Pohang 37666, Republic of Korea
21 shared publications - Hyungjoo Kang
Autonomous Systems R&D Division, Korea Institute of Robotics & Technology Convergence, Jigok-Ro 39, Nam-gu, Pohang 37666, Republic of Korea
20 shared publications - Gun Rae Cho
Autonomous Systems R&D Division, Korea Institute of Robotics & Technology Convergence, Jigok-Ro 39, Nam-gu, Pohang 37666, Republic of Korea
17 shared publications - Mun-Jik Lee
Autonomous Systems R&D Division, Korea Institute of Robotics & Technology Convergence, Jigok-Ro 39, Nam-gu, Pohang 37666, Republic of Korea
17 shared publications - Han-Sol Jin
Autonomous Systems R&D Division, Korea Institute of Robotics & Technology Convergence, Jigok-Ro 39, Nam-gu, Pohang 37666, Republic of Korea
9 shared publications - Sangrok Jin
School of Mechanical Engineering, Pusan National University, 2 Busandaehag-ro 63 Beon-gil, Geumjeong-gu, Pusan 46241, Republic of Korea
3 shared publications
Latest Publications
- Open Access
- 2 November 2026
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 14 (21) , 2054
Experimental Evaluation of Error-Dynamics-Based Trajectory Tracking for a Torpedo-Type AUV with Thrust Vectoring
This study implements an error dynamics design and time delay estimation (TDE)-based control structure from previous work for three-dimensional trajectory tracking of a thrust vectoring system (TVS)-based torpedo-type autonomous underwater vehicle (AUV) and evaluates its tracking performance through sea trials. The structure of error dynamics design with time delay estimation (EDD-TDE), which incorporates the time derivatives of the position tracking errors, is retained, while the control outputs are formulated as propulsor rotational speed and TVS deflection angle commands with estimation filtering and actuator command limits. Performance is compared with coupled error dynamics with time delay estimation (CDTDE) for two multi-waypoint reference trajectories comprising straight segments, turns, and depth transitions. Numerical simulations apply forces and moments directly to a REMUS-based motion model, while the performance of the actual TVS-based implementation is evaluated through sea trials. Over the post-transient underwater operating intervals, EDD-TDE reduced the 3D position RMSE by approximately 13.7% and 23.4% relative to CDTDE for the two trajectories, respectively, and reduced the vertical RMSE by approximately 78.2% and 76.3%. The surge velocity and heading RMSE values also decreased; however, the along-track position RMSE increased, with a residual offset remaining. These results demonstrate the applicability of the control method to a TVS-based AUV and its improvement in underwater position tracking performance, while highlighting the need for further improvement in along-track tracking performance.
- 2 November 2026
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 14 (21) , 2054
Open AccessExperimental Evaluation of Error-Dynamics-Based Trajectory Tracking for a Torpedo-Type AUV with Thrust Vectoring
This study implements an error dynamics design and time delay estimation (TDE)-based control structure from previous work for three-dimensional trajectory tracking of a thrust vectoring system (TVS)-based torpedo-type autonomous underwater vehicle (AUV) and evaluates its tracking performance through sea trials. The structure of error dynamics design with time delay estimation (EDD-TDE), which incorporates the time derivatives of the position tracking errors, is retained, while the control outputs are formulated as propulsor rotational speed and TVS deflection angle commands with estimation filtering and actuator command limits. Performance is compared with coupled error dynamics with time delay estimation (CDTDE) for two multi-waypoint reference trajectories comprising straight segments, turns, and depth transitions. Numerical simulations apply forces and moments directly to a REMUS-based motion model, while the performance of the actual TVS-based implementation is evaluated through sea trials. Over the post-transient underwater operating intervals, EDD-TDE reduced the 3D position RMSE by approximately 13.7% and 23.4% relative to CDTDE for the two trajectories, respectively, and reduced the vertical RMSE by approximately 78.2% and 76.3%. The surge velocity and heading RMSE values also decreased; however, the along-track position RMSE increased, with a residual offset remaining. These results demonstrate the applicability of the control method to a TVS-based AUV and its improvement in underwater position tracking performance, while highlighting the need for further improvement in along-track tracking performance.
- Open Access
- 20 October 2026
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 14 (20) , 1955
Correction: Kang et al. Estimation of Hydrodynamic Coefficients for the Underwater Robot P-SUROII via Constraint Recursive Least Squares Method. J. Mar. Sci. Eng. 2025, 13, 1610
- 20 October 2026
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 14 (20) , 1955
Open AccessCorrection: Kang et al. Estimation of Hydrodynamic Coefficients for the Underwater Robot P-SUROII via Constraint Recursive Least Squares Method. J. Mar. Sci. Eng. 2025, 13, 1610
- Open Access
- 2 October 2026
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 14 (19) , 1838
Design and Open-Water Validation of an Autonomous Underwater Robot for Physical Diver Safety Assistance
Diving accidents remain frequently fatal, and most stem from preventable human factors: panic, failed buoyancy control, and disorientation. Underwater human–robot interaction research has focused on observing the diver and offers little help when a diver must be pulled to safety. This paper presents the design and sea validation of NADIA, an autonomous underwater robot that combines diver guidance and following with diver-commanded physical assistance. A rear handle converts the diver’s grip into thrust and springs back to neutral on release; a diver-facing display shows depth, distance, battery state, and warnings. Six vector thrusters, with mounting angles optimized by gradient descent against drag-model thrust-ratio targets, are driven by an operational-space time-delay controller (TDC-OSF) that keeps the robot in the diver’s view; stereo vision and imaging sonar are fused for diver detection. In test-bed, tank, and sea trials, surge and heave thrusts matched design targets within 5–7%; approval-gated guidance held the robot 1–2 m from the diver with position and heading errors below 0.15 m and 3.5°; and the robot towed a diver at about 1 m/s and rose from 5 m to the surface in about 4 s. An underwater robot can thus serve as a physical safety layer for divers.
- 2 October 2026
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 14 (19) , 1838
Open AccessDesign and Open-Water Validation of an Autonomous Underwater Robot for Physical Diver Safety Assistance
Diving accidents remain frequently fatal, and most stem from preventable human factors: panic, failed buoyancy control, and disorientation. Underwater human–robot interaction research has focused on observing the diver and offers little help when a diver must be pulled to safety. This paper presents the design and sea validation of NADIA, an autonomous underwater robot that combines diver guidance and following with diver-commanded physical assistance. A rear handle converts the diver’s grip into thrust and springs back to neutral on release; a diver-facing display shows depth, distance, battery state, and warnings. Six vector thrusters, with mounting angles optimized by gradient descent against drag-model thrust-ratio targets, are driven by an operational-space time-delay controller (TDC-OSF) that keeps the robot in the diver’s view; stereo vision and imaging sonar are fused for diver detection. In test-bed, tank, and sea trials, surge and heave thrusts matched design targets within 5–7%; approval-gated guidance held the robot 1–2 m from the diver with position and heading errors below 0.15 m and 3.5°; and the robot towed a diver at about 1 m/s and rose from 5 m to the surface in about 4 s. An underwater robot can thus serve as a physical safety layer for divers.
- Open Access
- 28 November 2025
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 13 (12) , 2266
Fault-Tolerant Hovering Control for an ROV Using a Diagnosis-Based Thrust Reallocation Strategy
This study proposes an integrated Fault Diagnosis (FDD) and Fault-Tolerant Control (FTC) framework aimed at enhancing the operational stability of Remotely Operated Vehicles (ROVs) by addressing thruster faults that compromise mission safety. The proposed methodology utilizes a data-driven FDD system, based on the Density-Based Spatial Clustering of Applications with Noise (DBSCAN) algorithm, to identify propeller breakage and entanglement faults from thruster current and Revolutions Per Minute (RPM) data. Based on the diagnostic results, an adaptive FTC strategy is activated, applying a ‘Thrust Compensation’ model for breakage faults and an ‘Exclusion and Reallocation’ approach for entanglement faults. The performance of the framework was validated through experiments in an engineering water tank, where results demonstrated a significant improvement in the ROV’s hovering stability and control accuracy under fault conditions. The system successfully restored thrust balance during breakage scenarios and maintained a stable attitude after excluding an entangled thruster. Consequently, the proposed adaptive FDD-FTC framework provides an effective solution for enhancing the operational reliability and safety of ROVs.
- 28 November 2025
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 13 (12) , 2266
Open AccessFault-Tolerant Hovering Control for an ROV Using a Diagnosis-Based Thrust Reallocation Strategy
This study proposes an integrated Fault Diagnosis (FDD) and Fault-Tolerant Control (FTC) framework aimed at enhancing the operational stability of Remotely Operated Vehicles (ROVs) by addressing thruster faults that compromise mission safety. The proposed methodology utilizes a data-driven FDD system, based on the Density-Based Spatial Clustering of Applications with Noise (DBSCAN) algorithm, to identify propeller breakage and entanglement faults from thruster current and Revolutions Per Minute (RPM) data. Based on the diagnostic results, an adaptive FTC strategy is activated, applying a ‘Thrust Compensation’ model for breakage faults and an ‘Exclusion and Reallocation’ approach for entanglement faults. The performance of the framework was validated through experiments in an engineering water tank, where results demonstrated a significant improvement in the ROV’s hovering stability and control accuracy under fault conditions. The system successfully restored thrust balance during breakage scenarios and maintained a stable attitude after excluding an entangled thruster. Consequently, the proposed adaptive FDD-FTC framework provides an effective solution for enhancing the operational reliability and safety of ROVs.
- Open Access
- 20 November 2025
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 13 (11) , 2214
Robust Relative Space Motion Control of Underwater Vehicles Using Time Delay Estimation
This paper presents a robust trajectory-tracking control framework for underwater vehicles operating in a relative coordinate system. Unlike conventional methods that define trajectories in the world frame, the proposed approach formulates the control problem directly in a moving reference frame, enabling accurate motion control with respect to dynamic and drifting objects affected by environmental disturbances such as ocean currents and waves. This relative-space formulation is particularly advantageous for tasks including diver guidance, floating-object inspection, and docking, where the reference itself is nonstationary. A coordinate transformation is introduced to consistently express the vehicle dynamics in the relative frame. Based on the transformed dynamics, a Time Delay Control (TDC) law is applied to estimate unmodeled dynamics and external disturbances without requiring precise system parameters. Theoretical stability analysis shows that the stability condition of the proposed controller is consistent with that of conventional TDC, allowing similar gain-tuning procedures. Simulation results demonstrate that the proposed controller achieves robust and smooth trajectory tracking even when the reference frame undergoes motion induced by ocean currents.
- 20 November 2025
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 13 (11) , 2214
Open AccessRobust Relative Space Motion Control of Underwater Vehicles Using Time Delay Estimation
This paper presents a robust trajectory-tracking control framework for underwater vehicles operating in a relative coordinate system. Unlike conventional methods that define trajectories in the world frame, the proposed approach formulates the control problem directly in a moving reference frame, enabling accurate motion control with respect to dynamic and drifting objects affected by environmental disturbances such as ocean currents and waves. This relative-space formulation is particularly advantageous for tasks including diver guidance, floating-object inspection, and docking, where the reference itself is nonstationary. A coordinate transformation is introduced to consistently express the vehicle dynamics in the relative frame. Based on the transformed dynamics, a Time Delay Control (TDC) law is applied to estimate unmodeled dynamics and external disturbances without requiring precise system parameters. Theoretical stability analysis shows that the stability condition of the proposed controller is consistent with that of conventional TDC, allowing similar gain-tuning procedures. Simulation results demonstrate that the proposed controller achieves robust and smooth trajectory tracking even when the reference frame undergoes motion induced by ocean currents.
- Open Access
- 23 August 2025
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 13 (9) , 1610
Estimation of Hydrodynamic Coefficients for the Underwater Robot P-SUROII via Constraint Recursive Least Squares Method
This study proposes a system identification (SI) technique based on the constrained recursive least squares (CRLS) method to model the dynamics of the P-SUROII. By simplifying the dynamic model in consideration of the inherent characteristics of underwater vehicles and minimizing the number of parameters to be estimated, the proposed approach aims to improve estimation accuracy. In addition, a simplified thruster input model was applied to quantify the actual thruster output and improve the reliability of the input data. To satisfy the persistent excitation (PE) condition during the estimation process, experiments incorporating various motion modes were designed, and free-running and S-shaped maneuvering tests were additionally conducted to validate the model’s generalization capability and prediction performance. The coefficients estimated using the CRLS method, which is robust to noise and bias, were evaluated using quantitative similarity metrics such as root mean squared error (RMSE) and mean absolute error (MAE), confirming their validity. The proposed method effectively captures the actual dynamics of the underwater vehicle and is expected to serve as a key enabling technology for the future development of high-performance control systems and autonomous operation systems.
- 23 August 2025
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 13 (9) , 1610
Open AccessEstimation of Hydrodynamic Coefficients for the Underwater Robot P-SUROII via Constraint Recursive Least Squares Method
This study proposes a system identification (SI) technique based on the constrained recursive least squares (CRLS) method to model the dynamics of the P-SUROII. By simplifying the dynamic model in consideration of the inherent characteristics of underwater vehicles and minimizing the number of parameters to be estimated, the proposed approach aims to improve estimation accuracy. In addition, a simplified thruster input model was applied to quantify the actual thruster output and improve the reliability of the input data. To satisfy the persistent excitation (PE) condition during the estimation process, experiments incorporating various motion modes were designed, and free-running and S-shaped maneuvering tests were additionally conducted to validate the model’s generalization capability and prediction performance. The coefficients estimated using the CRLS method, which is robust to noise and bias, were evaluated using quantitative similarity metrics such as root mean squared error (RMSE) and mean absolute error (MAE), confirming their validity. The proposed method effectively captures the actual dynamics of the underwater vehicle and is expected to serve as a key enabling technology for the future development of high-performance control systems and autonomous operation systems.
- Open Access
- 30 April 2025
- Published by The Korean Society of Ocean Engineers in Journal of Ocean Engineering and Technology
- Vol. 39 (2) , 235-247
Robot-Based Diver Safety Support Scenario and Concept Design for NADIA
This paper describes the definition of robot functions and conceptual design for the effective development of a diver safety support robot: the nautical advanced diving intelligent assistance system (NADIA). It is designed to support divers’ safe activities by monitoring them in close proximity, aiming to prevent the majority of diving accidents caused by individual negligence. Through literature analysis, expert consultations, and direct experience, we derived the concept of diver support for the robot, and based on existing diver-centered diving scenarios, we established robot-based diver support scenarios. This process allowed us to define the robot’s functions and derive specific design plans for their implementation. The derived functions require the robot to have a lightweight and compact form with high degrees of motion freedom for dexterous movement; AI-based capabilities to estimate the diver’s position, posture, and status; precise autonomous control and self-localization technologies for close-proximity support; and the ability to use a display, sound, or light to convey information and alerts during diving. To implement these functions, design elements such as modularization and vector arrangement of propulsion units were derived. By defining and refining these required functions, we aimed to enhance the robot’s practicality and enable the successful execution of the project.
- 30 April 2025
- Published by The Korean Society of Ocean Engineers in Journal of Ocean Engineering and Technology
- Vol. 39 (2) , 235-247
Open AccessRobot-Based Diver Safety Support Scenario and Concept Design for NADIA
This paper describes the definition of robot functions and conceptual design for the effective development of a diver safety support robot: the nautical advanced diving intelligent assistance system (NADIA). It is designed to support divers’ safe activities by monitoring them in close proximity, aiming to prevent the majority of diving accidents caused by individual negligence. Through literature analysis, expert consultations, and direct experience, we derived the concept of diver support for the robot, and based on existing diver-centered diving scenarios, we established robot-based diver support scenarios. This process allowed us to define the robot’s functions and derive specific design plans for their implementation. The derived functions require the robot to have a lightweight and compact form with high degrees of motion freedom for dexterous movement; AI-based capabilities to estimate the diver’s position, posture, and status; precise autonomous control and self-localization technologies for close-proximity support; and the ability to use a display, sound, or light to convey information and alerts during diving. To implement these functions, design elements such as modularization and vector arrangement of propulsion units were derived. By defining and refining these required functions, we aimed to enhance the robot’s practicality and enable the successful execution of the project.
- Open Access
Tracking Error Based Fault Tolerant Scheme for Marine Vehicles with Thruster Redundancy
This paper proposes an active model-based fault and failure tolerant control scheme for a class of marine vehicles with thruster redundancy. Unlike widely used state and parameter estimation methods, where the estimation errors are utilized to generate residual, in this paper we directly apply the trajectory tracking error terms to construct residual and detect thruster fault and failure in the steady state of the tracking system. As for identification or diagnosis, this paper proposes a novel scheme through a detailed examination of the tracking error trends and the combinations of thruster configurations. Since this fault detection and identification operates within the same closed-loop of the tracking control system, control reconfiguration can be easily achieved by adjusting the weight parameter of the isolated thruster to minimize tracking errors or residual. Numerical studies with the real world vehicle model is also carried out to verify the effectiveness of the proposed method.
Open AccessTracking Error Based Fault Tolerant Scheme for Marine Vehicles with Thruster Redundancy
This paper proposes an active model-based fault and failure tolerant control scheme for a class of marine vehicles with thruster redundancy. Unlike widely used state and parameter estimation methods, where the estimation errors are utilized to generate residual, in this paper we directly apply the trajectory tracking error terms to construct residual and detect thruster fault and failure in the steady state of the tracking system. As for identification or diagnosis, this paper proposes a novel scheme through a detailed examination of the tracking error trends and the combinations of thruster configurations. Since this fault detection and identification operates within the same closed-loop of the tracking control system, control reconfiguration can be easily achieved by adjusting the weight parameter of the isolated thruster to minimize tracking errors or residual. Numerical studies with the real world vehicle model is also carried out to verify the effectiveness of the proposed method.
- Open Access
- 2 September 2024
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 12 (9) , 1522
Full Coverage Path Planning for Torpedo-Type AUVs’ Marine Survey Confined in Convex Polygon Area
In this paper, we present a full coverage path planning (CPP) algorithm for the marine surveys conducted in the convex polygon shaped search area. The survey is supposed to carry out by torpedo-type AUVs (autonomous underwater vehicles). Due to their nonholonomic mechanical characteristics, these vehicles have nonzero minimum turning radius. For any given polygon shaped search area, it can always be partitioned into one or more convex polygons. With this in mind, this paper proposes a novel search algorithm called CbSPSA (Calculation based Shortest Path Search Algorithm) for full coverage of any given convex polygon shaped search area. By aligning the search inter-tracks alongside the edge with the minimum height, we can guarantee the minimum number of the vehicle’s turns. In addition, the proposed method can guarantee the planned path is strictly located inside the polygon area without overlapped or crossed path lines, and also has the total path length as short as possible. Considering the vehicle’s nonzero minimum turning radius, we also propose a sort of smoothing algorithm which can smooth the waypoint path searched by CbSPSA so that the vehicle can exactly follow it. The smoothed path is also guaranteed to be strictly located inside the polygon. Numerical simulation analyses are also carried out to verify the effectiveness of the proposed schemes.
- 2 September 2024
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 12 (9) , 1522
Open AccessFull Coverage Path Planning for Torpedo-Type AUVs’ Marine Survey Confined in Convex Polygon Area
In this paper, we present a full coverage path planning (CPP) algorithm for the marine surveys conducted in the convex polygon shaped search area. The survey is supposed to carry out by torpedo-type AUVs (autonomous underwater vehicles). Due to their nonholonomic mechanical characteristics, these vehicles have nonzero minimum turning radius. For any given polygon shaped search area, it can always be partitioned into one or more convex polygons. With this in mind, this paper proposes a novel search algorithm called CbSPSA (Calculation based Shortest Path Search Algorithm) for full coverage of any given convex polygon shaped search area. By aligning the search inter-tracks alongside the edge with the minimum height, we can guarantee the minimum number of the vehicle’s turns. In addition, the proposed method can guarantee the planned path is strictly located inside the polygon area without overlapped or crossed path lines, and also has the total path length as short as possible. Considering the vehicle’s nonzero minimum turning radius, we also propose a sort of smoothing algorithm which can smooth the waypoint path searched by CbSPSA so that the vehicle can exactly follow it. The smoothed path is also guaranteed to be strictly located inside the polygon. Numerical simulation analyses are also carried out to verify the effectiveness of the proposed schemes.
- Open Access
- 31 August 2024
- Published by The Korean Society of Ocean Engineers in Journal of Ocean Engineering and Technology
- Vol. 38 (4) , 187-198
OGM-Based Real-Time Obstacle Detection and Avoidance Using a Multi-beam Forward Looking Sonar
Autonomous underwater vehicles (AUVs) have a limited bandwidth for real-time communication, limiting rapid responses to unexpected obstacles. This study addressed how AUVs can navigate to a target without a pre-existing obstacle map by generating one in real-time and avoiding obstacles. This paper proposes using forward-looking sonar with an occupancy grid map (OGM) for real-time obstacle mapping and a potential field algorithm for avoiding obstacles. The OGM segments the map into grids, updating the obstacle probability of each cell for precise, quick mapping. The potential field algorithm attracts the AUV towards the target and uses repulsive forces from obstacles for path planning, enhancing computational efficiency in a dynamic environment. Experiments were conducted in coastal waters with obstacles to verify the real-time obstacle mapping and avoidance algorithm. Despite the high noise in sonar data, the experimental results confirmed effective obstacle mapping and avoidance. The OGM-based potential field algorithm was computationally efficient, suitable for single-board computers, and demonstrated proper parameter adjustments through two distinct scenarios. The experiments also identified some of challenges, such as dynamic changes in detection rates, propulsion bubbles, and changes in repulsive forces caused by sudden obstacles. An enhanced algorithm to address these issues is currently under development.
- 31 August 2024
- Published by The Korean Society of Ocean Engineers in Journal of Ocean Engineering and Technology
- Vol. 38 (4) , 187-198
Open AccessOGM-Based Real-Time Obstacle Detection and Avoidance Using a Multi-beam Forward Looking Sonar
Autonomous underwater vehicles (AUVs) have a limited bandwidth for real-time communication, limiting rapid responses to unexpected obstacles. This study addressed how AUVs can navigate to a target without a pre-existing obstacle map by generating one in real-time and avoiding obstacles. This paper proposes using forward-looking sonar with an occupancy grid map (OGM) for real-time obstacle mapping and a potential field algorithm for avoiding obstacles. The OGM segments the map into grids, updating the obstacle probability of each cell for precise, quick mapping. The potential field algorithm attracts the AUV towards the target and uses repulsive forces from obstacles for path planning, enhancing computational efficiency in a dynamic environment. Experiments were conducted in coastal waters with obstacles to verify the real-time obstacle mapping and avoidance algorithm. Despite the high noise in sonar data, the experimental results confirmed effective obstacle mapping and avoidance. The OGM-based potential field algorithm was computationally efficient, suitable for single-board computers, and demonstrated proper parameter adjustments through two distinct scenarios. The experiments also identified some of challenges, such as dynamic changes in detection rates, propulsion bubbles, and changes in repulsive forces caused by sudden obstacles. An enhanced algorithm to address these issues is currently under development.