Qiyue Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Qiyue Wang has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
- YuMing Zhang
Department of Electrical and Computer Engineering and Institute for Sustainable Manufacturing, University of Kentucky, Lexington, USA
7 shared publications - Wenhua Jiao
College of Electrical Engineering and Control Science, Nanjing Tech University, Nanjing, China
6 shared publications - Michael T. Johnson
Tsinghua National Laboratory for Information Science and Technology Department of Electronic Engineering Tsinghua University 100084 Beijing China
2 shared publications - Rui Yu
Department of Electrical and Computer Engineering and Institute for Sustainable Manufacturing, University of Kentucky, Lexington, KY 40506, USA
2 shared publications - Yongchao Cheng2 shared publications
Baohui Lu
Shandong Jianzhu University (China)
1 shared publication
Latest Publications
- 17 May 2022
- Published by SPIE-Intl Soc Optical Eng
- Vol. 12259, 335-342
Study on decomposition of fungi based on mathematical model
Fungi, as decomposers in the ecosystem, play an important role in the decomposition of lignocellulose and promote the carbon cycle in the ecosystem. In this paper, the decomposition of fungi was simulated by establishing a mathematical model, and the effects of humidity and temperature on the decomposition rate of fungi were analyzed by linear regression model without considering the interaction between fungi. Combined with differential equations and metacellular automata model, the interaction between fungi was considered to describe how different populations of fungi interact in a given environment.
- 17 May 2022
- Published by SPIE-Intl Soc Optical Eng
- Vol. 12259, 335-342
Study on decomposition of fungi based on mathematical model
Fungi, as decomposers in the ecosystem, play an important role in the decomposition of lignocellulose and promote the carbon cycle in the ecosystem. In this paper, the decomposition of fungi was simulated by establishing a mathematical model, and the effects of humidity and temperature on the decomposition rate of fungi were analyzed by linear regression model without considering the interaction between fungi. Combined with differential equations and metacellular automata model, the interaction between fungi was considered to describe how different populations of fungi interact in a given environment.
- 1 March 2021
- Published by Elsevier in Journal of Manufacturing Processes
- Vol. 63, 2-13
A tutorial on deep learning-based data analytics in manufacturing through a welding case study
- 1 March 2021
- Published by Elsevier in Journal of Manufacturing Processes
- Vol. 63, 2-13
A tutorial on deep learning-based data analytics in manufacturing through a welding case study
- Top Cited Papers
- 1 March 2021
- Published by Elsevier in Journal of Manufacturing Processes
- Vol. 63, 191-197
End-to-end prediction of weld penetration: A deep learning and transfer learning based method
- 1 March 2021
- Published by Elsevier in Journal of Manufacturing Processes
- Vol. 63, 191-197
Top Cited PapersEnd-to-end prediction of weld penetration: A deep learning and transfer learning based method
- Top Cited Papers
- 1 October 2020
- Published by Elsevier in Journal of Manufacturing Systems
- Vol. 57, 429-439
Deep learning-empowered digital twin for visualized weld joint growth monitoring and penetration control
- 1 October 2020
- Published by Elsevier in Journal of Manufacturing Systems
- Vol. 57, 429-439
Top Cited PapersDeep learning-empowered digital twin for visualized weld joint growth monitoring and penetration control
- Open Access
- 12 August 2020
- Published by Wiley in Canadian Journal of Gastroenterology and Hepatology
- Vol. 2020, 1-8
Opening a Window on Attention: Adjuvant Therapies for Inflammatory Bowel Disease
Inflammatory bowel disease (IBD), most commonly known as Crohn’s disease (CD) and ulcerative disease (UC), is a chronic and relapsing intestinal disease which cannot be cured completely. The prevalence of IBD in Europe and in North America has increased over the past 20 years. As most IBD patients are young at onset, their quality of life (QOL) can be influenced to varying degrees. Thus, current treatment goals are typically focused on preventing complications, including maintaining clinical remission and improving the QOL. Adjuvant therapies have been widely concerned as an effective treatment in alleviating IBD symptoms, including dietary intervention, traditional Chinese medicine, smoking, alcohol, and physical activities. This review focuses on different ancillary therapies for IBD treatments, in particular the mechanism of reducing inflammation based on the actual data from research studies. Moreover, comparing the latest data, this review also presented potential future prospect for adjuvant therapies.
- 12 August 2020
- Published by Wiley in Canadian Journal of Gastroenterology and Hepatology
- Vol. 2020, 1-8
Open AccessOpening a Window on Attention: Adjuvant Therapies for Inflammatory Bowel Disease
Inflammatory bowel disease (IBD), most commonly known as Crohn’s disease (CD) and ulcerative disease (UC), is a chronic and relapsing intestinal disease which cannot be cured completely. The prevalence of IBD in Europe and in North America has increased over the past 20 years. As most IBD patients are young at onset, their quality of life (QOL) can be influenced to varying degrees. Thus, current treatment goals are typically focused on preventing complications, including maintaining clinical remission and improving the QOL. Adjuvant therapies have been widely concerned as an effective treatment in alleviating IBD symptoms, including dietary intervention, traditional Chinese medicine, smoking, alcohol, and physical activities. This review focuses on different ancillary therapies for IBD treatments, in particular the mechanism of reducing inflammation based on the actual data from research studies. Moreover, comparing the latest data, this review also presented potential future prospect for adjuvant therapies.
- 1 August 2020
- Published by Elsevier in Journal of Manufacturing Processes
- Vol. 56, 908-915
Detecting dynamic development of weld pool using machine learning from innovative composite images for adaptive welding
- 1 August 2020
- Published by Elsevier in Journal of Manufacturing Processes
- Vol. 56, 908-915
Detecting dynamic development of weld pool using machine learning from innovative composite images for adaptive welding
- 1 December 2019
- Published by Elsevier in Journal of Manufacturing Processes
- Vol. 48, 210-217
Virtual reality human-robot collaborative welding: A case study of weaving gas tungsten arc welding
- 1 December 2019
- Published by Elsevier in Journal of Manufacturing Processes
- Vol. 48, 210-217
Virtual reality human-robot collaborative welding: A case study of weaving gas tungsten arc welding
- 11 November 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automation Science and Engineering
- Vol. 17 (2) , 799-808
Virtual Reality Robot-Assisted Welding Based on Human Intention Recognition
We propose an innovative approach to enhance welding operations by using a cyber-physical system (CPS) with layered architecture and enabling a robot to be effectively operated by its commanding human. This article focuses on the recognition of the commanding human's intention that should be executed by the robot. To this end, a virtual reality (VR) system based on the HTC Vive is used to create a remote virtual welding environment. Human hand movement speed data is collected and used to train a hidden Markov model (HMM) using the Baum-Welch algorithm. The Bayesian information criterion (BIC) is applied to determine the number of hidden states. The state occupancy probability distribution (the probability of each state at a given time) is estimated based on the human hand movement speed sequence using the forward algorithm. The human intention, defined as the intended movement in this article, is then estimated as the statistical expectation of the observable variables. Using the proposed human intention estimation algorithm, the intended movement recognized from the raw movement data is smoother, which is preferable in welding tasks. A 6-DoF industrial robot, UR-5 with a custom gas tungsten arc welding (GTAW) torch installed, works as the final performer of the welding jobs. The robot receives the intended movement data from the HMM and uses this to assist the human welding operators. Welding experiments have been conducted both with and without the proposed human intention recognition (IR) algorithm. The results show that the robot can help the operators complete welding tasks with better performance using the proposed IR system, supporting the effectiveness of the proposed VR robot-assisted welding system.
- 11 November 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automation Science and Engineering
- Vol. 17 (2) , 799-808
Virtual Reality Robot-Assisted Welding Based on Human Intention Recognition
We propose an innovative approach to enhance welding operations by using a cyber-physical system (CPS) with layered architecture and enabling a robot to be effectively operated by its commanding human. This article focuses on the recognition of the commanding human's intention that should be executed by the robot. To this end, a virtual reality (VR) system based on the HTC Vive is used to create a remote virtual welding environment. Human hand movement speed data is collected and used to train a hidden Markov model (HMM) using the Baum-Welch algorithm. The Bayesian information criterion (BIC) is applied to determine the number of hidden states. The state occupancy probability distribution (the probability of each state at a given time) is estimated based on the human hand movement speed sequence using the forward algorithm. The human intention, defined as the intended movement in this article, is then estimated as the statistical expectation of the observable variables. Using the proposed human intention estimation algorithm, the intended movement recognized from the raw movement data is smoother, which is preferable in welding tasks. A 6-DoF industrial robot, UR-5 with a custom gas tungsten arc welding (GTAW) torch installed, works as the final performer of the welding jobs. The robot receives the intended movement data from the HMM and uses this to assist the human welding operators. Welding experiments have been conducted both with and without the proposed human intention recognition (IR) algorithm. The results show that the robot can help the operators complete welding tasks with better performance using the proposed IR system, supporting the effectiveness of the proposed VR robot-assisted welding system.
- 24 June 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 4 (3) , 3091-3097
3D Reconstruction of Weld Pool Surface in Pulsed GMAW by Passive Biprism Stereo Vision
Geometrical information of the 3D weld pool surface provides clues to determine the penetration state whose monitoring and feedback control are crucial for critical applications involving high temperatures and pressures. In this paper, a biprism stereo vision system is established to sense the weld pool surface under different penetration states during pulsed gas metal arc welding (GMAW-P) with V groove joint. Only one optical filter is used to block out the arc and capture a clear image of the weld pool during the base current period in GMAW-P. While most of the weld pool surface is textureless, there are a few features such as slags that are detectable. Hence, during the stereo matching sparse feature corners are detected and credibly matched in pairs, followed by a disparity region growing step to produce a semi-dense and unambiguous disparity map. Polynomial interpolation is applied to obtain sub-pixel disparity for every matched pixel. Finally, the point cloud and triangle mesh representation of the weld pool surfaces with different penetration states, partial, full, and over penetration, are presented. The experimental results verified the effectiveness of the proposed biprism stereo vision method in monitoring the weld penetration state.
- 24 June 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 4 (3) , 3091-3097
3D Reconstruction of Weld Pool Surface in Pulsed GMAW by Passive Biprism Stereo Vision
Geometrical information of the 3D weld pool surface provides clues to determine the penetration state whose monitoring and feedback control are crucial for critical applications involving high temperatures and pressures. In this paper, a biprism stereo vision system is established to sense the weld pool surface under different penetration states during pulsed gas metal arc welding (GMAW-P) with V groove joint. Only one optical filter is used to block out the arc and capture a clear image of the weld pool during the base current period in GMAW-P. While most of the weld pool surface is textureless, there are a few features such as slags that are detectable. Hence, during the stereo matching sparse feature corners are detected and credibly matched in pairs, followed by a disparity region growing step to produce a semi-dense and unambiguous disparity map. Polynomial interpolation is applied to obtain sub-pixel disparity for every matched pixel. Finally, the point cloud and triangle mesh representation of the weld pool surfaces with different penetration states, partial, full, and over penetration, are presented. The experimental results verified the effectiveness of the proposed biprism stereo vision method in monitoring the weld penetration state.
- 10 June 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 4 (3) , 2958-2964
Modeling of Human Welders’ Operations in Virtual Reality Human–Robot Interaction
This paper presents a virtual reality (VR) human-robot interaction welding system which allows human welders to manipulate a welding robot and undertake welding tasks naturally and intuitively via consumer-grade VR hardware (HTC Vive). In this system, human welders' operations are captured by motion-tracked handle controllers and used as commands to teleoperate a 6-DoF industrial robot (UR-5) and to request welding current from a controllable welding power supply (Liburdi Pulsweld P200). The 3D working scene is rendered in real time based on feedback information and shown to the human welder by head-mounted display (HMD) via a motion-tracked headset. To compensate for the time delay between command motion and real motion of the robot, a hidden Markov model (HMM) is proposed to model and predict human welders' operations. The K-means clustering algorithm is applied to cluster human welders' operation data (traveling speed) into latent states. Based on the developed prediction algorithm, the motion of human welders is predicted with an RMSE accuracy of between 2.1 and 4.6mm/s. The position data used as final commands to teleoperate a robot is predicted with an RMSE accuracy of between 1.1 and 2.3mm. This paper presents a general cyber-physical model for human-robot interactive welding based on VR, building a foundation for welding robot teleoperation.
- 10 June 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 4 (3) , 2958-2964
Modeling of Human Welders’ Operations in Virtual Reality Human–Robot Interaction
This paper presents a virtual reality (VR) human-robot interaction welding system which allows human welders to manipulate a welding robot and undertake welding tasks naturally and intuitively via consumer-grade VR hardware (HTC Vive). In this system, human welders' operations are captured by motion-tracked handle controllers and used as commands to teleoperate a 6-DoF industrial robot (UR-5) and to request welding current from a controllable welding power supply (Liburdi Pulsweld P200). The 3D working scene is rendered in real time based on feedback information and shown to the human welder by head-mounted display (HMD) via a motion-tracked headset. To compensate for the time delay between command motion and real motion of the robot, a hidden Markov model (HMM) is proposed to model and predict human welders' operations. The K-means clustering algorithm is applied to cluster human welders' operation data (traveling speed) into latent states. Based on the developed prediction algorithm, the motion of human welders is predicted with an RMSE accuracy of between 2.1 and 4.6mm/s. The position data used as final commands to teleoperate a robot is predicted with an RMSE accuracy of between 1.1 and 2.3mm. This paper presents a general cyber-physical model for human-robot interactive welding based on VR, building a foundation for welding robot teleoperation.