Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Sergey A. Alekseytsev has a total of 16 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Printed Butler Matrix Based Eight-Beam Phased Array with Modified Phasers and End-Fed Dipole-Like Radiators

    by S. A. Alekseytsev, A. P. Gorbachev, Yu. N. Parshin

    Introduction . This paper presents comparative results of electrodynamic modeling and field measurements in an anechoic chamber of a prototype of a printed eight-beam phased antenna array based on the Butler matrix. A mathematical model of a modified differential phase shifter protected by a patent of the Russian Federation and characterized by the highest broadband to date is presented. The topology of an innovative dipole-type radiator with end feeding is proposed and characterized. Aim. To design an eight-beam antenna array based on a systems approach, to model its main electrodynamic characteristics, and to compare them with the results of full-scale experiments. Materials and methods. Electrodynamic models of elements and units of the diagram-forming circuit, as well as the emitter, were designed using the method of induced electromotive forces, mathematical foundations of designing microstrip-technologies, procedures for electrodynamic modeling of elements and units of microwave technology and microwave devices. The FAF-4D domestic dielectric material with a relative permittivity of 2.5 was used. Results . The characteristics of the matching and directivity of the eight-beam antenna array were obtained followed by their comparison with the results of full-wave electrodynamic modeling. As a result, in the frequency band of 2.02…2.37 GHz, an acceptable coincidence of the measured and modeled results is observed for the positions of the beams, cross-polarization intensities, reflection coefficients, and decoupling between the Butler matrix inputs of no worse than 15 dB. Conclusion . The design and final refinement of phased antenna arrays with improved electrodynamic characteristics, taking domestic design and technological standards into account, will form a basis for a qualitative increase in the tactical and technical performance of transceiver devices as a whole, allowing procedures for synthesizing such arrays and their individual units to be developed.

  • Dual-Band Planar Antenna Array Based on Dipole Radiators with Nonstandard Excitation

    by S. A. Alekseitsev, Yu. N. Parshin, A. A. Kolesnikov

    A model of a dual-band microstrip antenna array based on a dipole radiator with end excitation is proposed and analyzed in terms of electrodynamic antenna

  • Measuring the gravitational frequency shift in a hydrogen clock when transmitting a signal via optical and radio frequency communication channels

    by Alexandr K. Dmitriev, Alexander P. Karpik, Alexsander S. Tolstikov, Nickolai N. Golovin, Konstantin N. Savinov, Vyacheslav S. Boldyrev, Dmitry F. Gusar, Sergey A. Alekseytsev, Andrei S. Tomilov, Aleksey V. Ivanenko

    A scheme for measuring the gravitational frequency shift of hydrogen clocks during their movement between two points located at different orthometric altidudes with simultaneous signal transmission via radio and fiber-optic communication lines has been implemented. Practical interest in studying the gravitational frequency shift of quantum standards is associated with the need to take it into account to improve accuracy in navigation satellite systems. Such measurements were performed using a space synchronization channel using signals from global navigation satellite systems. This became especially relevant when improving the metrological characteristics of quantum frequency and time standards, in particular, using transportable clocks based on optical lattices when transmitting a signal via fiber-optic communication lines. On the other hand, using quantum clocks, measurements of the difference in orthometric heights are performed using the relativistic synchronization method and the simultaneous use of the frequency standard redshift effect due to time dilation in a gravitational field and the redshift effect of photons overcoming the gravitational field. This paper presents the results of measuring the gravitational frequency shift of a hydrogen clock when it is moved between two points located at different orthometric heights with signal transmission via a fiber-optic communication line and via a radio channel. In the first case, the radiation of a diode laser at a wavelength of 1.5 μm amplitude-modulated by a signal from the transported hydrogen clock at a frequency of 10 MHz, was transmitted via a fiber-optic communication line when a stationary hydrogen clock was used as a reference. Transmission via a radio channel was carried out via a coaxial radio frequency cable. The measurements were carried out on the territory of the West Siberian branch of the FSUE "VNIIFTRI".

  • Broadband Butler matrix 4x4 with crossover as a differential phase shifter

    by S.A. Alekseytsev, A.P. Gorbachev, Yu.N. Parshin

    The aim of the work is to develop a broadband beam forming device based on a systems approach. The layout of the 4x4 Butler matrix presented in the work allows minimizing the overall dimensions of the beam forming device. The method used in the work allows you to bypass problems with interference at the nodes of line intersections from opposite sides of the board, thereby eliminating unnecessary capacity coupling. The crossover formed from two sequentially installed directional couplers ensures the absence of a signal at the output, which comes from a galvanic coupled input due to the out-of-phase division. The main electrodynamic characteristics of both the component parts of the beam forming device, such as the directional coupler and crossover, and the entire device as a whole are estimated. The entire design of the Butler matrix is assembled on a dielectric substrate made of domestic material FAF-4D with a relative permittivity of 2.5 and a thickness of 0.3 mm, which is located between two dielectric layers 1.5 mm thick.

  • Semi-Automatic Design of Dual-Band End-Fed Antennas for Digital Antenna Arrays

    by S. A. Alekseytsev, A. A. Kolesnikov, Yu. N. Parshin

    Introduction. The topic of implementing a dual-band mode of operation for director dipole antennas is represented by a wide range of works, almost all of which are dedicated to studying the properties of a classic dipole. However, the issue of end excitation of radiators for dual-band director antennas remains open. The development of such radiators requires a deep analysis both from the point of view of developing mathematical and electrodynamics models, which corresponds to the tactical and technical requirements of modern digital antenna arrays.Aim. To substantiate a procedure for determining the initial appearance of a dual-band antenna exciter from the standpoint of the systems approach to the design of antenna elements and nodes. This procedure is suitable for a semi-automated design of more complex antenna systems.Materials and methods. As part of the research, the input impedance of a dual-band system consisting of two active radiators and two passive directors was determined using the method of induced electromotive forces (EMF). Models of dual-band director radiators were developed using the CST Studio Suite 2021 full-wave electromagnetic simulation.Results. The results of developing procedures for a semi-automatic design of antennas with a dual-band function of input impedance are presented. Following a comparative analysis, approaches to implementing the printed layout of an antenna comprising standard radio engineering components, which imply serial production, are proposed.Conclusion. The proposed models can be used when designing director, turnstile, and cardioid antennas, as well as antenna arrays. These designs are analogous to antennas based on a classic central excited dipole.

  • Dual-band ends-fed dipole-like driver for dual-band antenna arrays

    by S.A. Alekseytsev, Yu.N. Parshin

    The article addresses the problem of dual-band structure designs based on the quasi-Yagi arrangements. The reported dual-band dipole antenna comprises the out-of-phase power divider, whose outputs excite the corresponding dipole arms to produce appropriate surface current distribution on them. The topology of the antenna itself is designed the way to provide high matching (the realized input reflection coefficient is not exceed minus 25 dB) at both central working frequencies. The low-band dipole is meandered to fit the substrate size. In addition, both the dipoles are excited on their remote terminals, which allows the more efficiently use of the circuit body space. The low profile implementation contributes to meeting the high demands of today and future wireless communications. The fundamental properties of linear dipole antennas, such as the Yagi, of being relatively simple in design, pure linearly polarized, having almost omnidirectional patterns made them of the great interest among researches. In addition, the Yagi arrangement itself allows building on its base even more complex antenna structures, comprised a number of linear dipoles, maintained along one of orthogonal axis. When centrally fed, the classical single-band Yagi antenna suffers from narrow band characteristics, becoming a kind of challenge, which has successfully been addressed by a number of researches in the past. At the same time, on the base of Yagi and quasi-Yagi designs it is possible to combine a number of radiating elements, producing, therefore, multi-band or wideband characteristics. This approach is highly efficient when designing multipurpose devices with different transmitting rates. In this project the novel approach for dual-band dipole antennas design is presented. The driven elements are excited from their remote terminals, forming the quasi-Yagi arrangement with untraditional excitation. The balancing scheme is formed by an out-of-phase power divider, whose outputs are connected to the dipoles arms. The topology of the antenna itself is designed to provide high matching (input reflection coefficient does not exceed minus 25 dB) at both center operating frequencies. When integrating a dual band balancing unit with the radiating elements it is crucial to provide low interference for better radiation characteristics. Besides, the surface currents on the ground plane, should not affect those on the radiating elements for better matching.

  • On the design of a dual-band ends-fed dipole-like antenna

    by A.S. Alekseytsev, Yu.N. Parshin

    The project is aimed at the designing, based on a systematic approach to the design of antenna elements and systems, an algorithm for design of dual-band dipole antennas with non-traditional excitation. The ends-fed excitation technique, proposed in the work, makes it possible to space the central part of the substrate for placing additional radioelectronic components, and at the same time to reduce the electromagnetic interaction of the supply strips of the balun circuit. The proposed excitation technique allows designing new types of antenna, such as cardioid antenna, turnstile antenna, antenna array with principally different electrodynamic regimes. The parametric optimization algorithm for the thin-wire model, as well as the printed equivalent, is based on formal relationships for the input impedance and the generalized directivity function of the driver proposed. The corresponding closed-form expressions specify initial approximations of independent geometry parameters calculated for given central matching frequencies. The stated sequence of procedures allows, within the framework of a systematic approach, to determine the initial approximations of the geometric parameters of the driver. At subsequent design stages, the problem of pairing the driver and the matching-balun circuit is solved. Thus, the entire task is decomposed into independent computational blocks, simplifying and reducing computational costs.

  • Printed dual-band director-type antennas with an end supply dipole exciter

    by Sergey A. Alekseitsev, Anatolii P. Gorbachev

    The issues of calculation and design of printed dual-band director-type antennas with dipole exciters powered at their remote terminals are considered in the monograph. In the course of research, new calculation ratios were obtained for determining the input impedances of antennas of this family, which make it possible to relate the sizes of printed fragments and the distance between them with the required input voltage standing wave ratio (VSWR). An analysis of the results of design and experimental studies has shown that the proposed dual-band director-type antennas are characterized by a quality of matching sufficient for practical use in each of two non-adjacent frequency sub-bands with a good shape of both spatial directiional patterns. The work was supported by RFBR grant No. 20-37-90018, 15 publications in peerreviewed journals, including one paper of the 1st quartile and one paper of the 3rd quartile of the Web of Science scientometric system, as well as two patents of the Russian Federation No. 2712798 (2020) and No. 2743624 (2021).

  • Open Access

    Initial designing a dual-band antenna baced on end-fed dipole-like radiators for digital antenna arrays

    by S. A. Alekseytsev

    The paper deals with the designing of the initial arrangement for dual-band antennas comprising two parallel dipole-like radiators as the drivers for the mentioned antenna. The excitation of the drivers is provided by the source of the induced electromotive forces (EMF), whose outputs are attached to the remote terminals of the radiators. The paper also provides the key electrodynamic characteristics of the structure under research for the following procedure of multi-parametric nonlinear optimization. In addition, on the basis of the induced EMF method, has been obtained the expressions for the far-field zone (Fraunhofer zone) characteristics with taking into account the parasitic currents on the radiating bodies of the dipole, which allows more accurate design of the initial topology of the antenna.

  • Open Access

    Analysis of dual-band matching of an ends-fed dipole-like antenna and a coaxial line

    by S. A. Alekseytsev, A. P. Gorbachev

    Вопрос двух/многодиапазонного излучения с одного монолитного антенного модуля в настоящее время является актуальным в условиях совершенствования как гражданских, так и оборонных систем беспроводной связи. В работе приведены результаты анализа вопросов согласования двухдиапазонных излучателей дипольного вида с концевым питанием (ИДВКП) с коаксиальными кабелями стандартных волновых сопротивлений. Основное внимание уделено формулировке необходимых требований к пространству параметров системы и частотному диапазону. В связи с этим исследована возможность сокращения объема вычислений на ранних этапах формирования облика излучателя, включающих в себя строгие методы расчета поля в ближней зоне, за счет неодинакового влияния зависимых параметров на входной импеданс излучателя. В качестве аппарата анализа электродинамических свойств рассматриваемой системы используется метод наведенных электродвижущих сил из теории цилиндрических излучателей, зарекомендовавший себя как один из наиболее эффективных в данной области техники.