Jianfei Yao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jianfei Yao has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
Yan Li
Beijing Univ Chem Technol, Beijing Key Lab High End Mech Equipment Hlth Monit, Beijing 100029, Peoples R China
7 shared publicationsFabrizio Scarpa
Univ Bristol, Bristol Composites Inst, Bristol BS8 1TR, England
5 shared publicationsZeliang Zhang
School of Mechanical and Electrical Engineering, Beijing University of Chemical Technology, Beijing, China
4 shared publicationsFengyu Yang
Beijing Univ Chem Technol, Sch Mech & Elect Engn, Beijing 100029, Peoples R China
3 shared publicationsJinji Gao
3 shared publicationsChangheng Yu
Beijing University of Chemical Technology
2 shared publications
Latest Publications
- 19 December 2025
- Published by SAGE Publications in Journal of Vibration and Control
Active suppression of multi-frequency rotor vibration using double auto-coupled sliding mode control
This work proposes a double auto-coupling sliding mode control method for multi-frequency rotor vibration suppression. The approach aims to mitigate multi-frequency vibrations encountered by rotating machinery under operational conditions. Expanding upon the conventional PD control framework, this approach integrates second-order differential elements derived from sliding mode control theory. The enhanced algorithm incorporates dual auto-coupling tuning mechanisms within the control architecture, thereby generating more precise control signals. The control system with an electromagnetic actuator (EA) enables accurate monitoring and control of rotor vibration signals. Initially, a rotor-bearing-EA model is established to analyze factors such as imbalance, misalignment, and friction during rotor rotation. Subsequently, the rotor system signal is extracted using a notch filter to capture frequencies of one or two times for real-time data collection. Both PD strategies and double auto-coupling strategies based on sliding mode control are employed for simulations and experiments. The findings indicate that this control strategy accurately outputs signals in real time, enhancing the precision and robustness of the shaft’s position after vibrations, and effectively mitigating significant chattering issues arising from sliding within the control algorithm during the control process.
- 19 December 2025
- Published by SAGE Publications in Journal of Vibration and Control
Active suppression of multi-frequency rotor vibration using double auto-coupled sliding mode control
This work proposes a double auto-coupling sliding mode control method for multi-frequency rotor vibration suppression. The approach aims to mitigate multi-frequency vibrations encountered by rotating machinery under operational conditions. Expanding upon the conventional PD control framework, this approach integrates second-order differential elements derived from sliding mode control theory. The enhanced algorithm incorporates dual auto-coupling tuning mechanisms within the control architecture, thereby generating more precise control signals. The control system with an electromagnetic actuator (EA) enables accurate monitoring and control of rotor vibration signals. Initially, a rotor-bearing-EA model is established to analyze factors such as imbalance, misalignment, and friction during rotor rotation. Subsequently, the rotor system signal is extracted using a notch filter to capture frequencies of one or two times for real-time data collection. Both PD strategies and double auto-coupling strategies based on sliding mode control are employed for simulations and experiments. The findings indicate that this control strategy accurately outputs signals in real time, enhancing the precision and robustness of the shaft’s position after vibrations, and effectively mitigating significant chattering issues arising from sliding within the control algorithm during the control process.
- 3 October 2025
- Published by Springer Nature in Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Vol. 47 (12) , 1-15
Underwater metamaterial absorbers via enhanced Helmholtz resonators: broadband low-frequency performance
- 3 October 2025
- Published by Springer Nature in Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Vol. 47 (12) , 1-15
Underwater metamaterial absorbers via enhanced Helmholtz resonators: broadband low-frequency performance
- 23 December 2024
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 147 (7) , 1-12
Study on Dynamic Characteristics of Single-Span Rotor Under Cross-Coupling Stiffness Control on Nondrive End
The sealing-induced cross-coupling stiffness (CCS) often decreases the rotordynamic stability of turbomachinery. In our previous study, an active negative CCS control strategy applied between two bearings in the middle of the rotor was validated to enhance the stability of the rotor system. In this paper, a different approach was taken by applying both positive and negative CCS control strategies to the nondrive end, aiming to investigate their effects on rotordynamic stability using a rotordynamic model. The model represented a single-span centrifugal compressor rotor with CCS at the seal node. The logarithmic decrements and unbalance response of the rotor system were compared under different CCS applications at the nondrive end and in the span. The results demonstrate that applying both positive and negative CCS at the nondrive end can improve system stability, but the positive CCS strategy has limitations, and its applicability is not as extensive as negative CCS. A “critical stiffness” phenomenon emerges when the rotor system is actively stabilized at the nondrive end, resembling critical resonance. Furthermore, when components like seals introduce cross-coupling stiffness out of the span, they contribute to system stabilization. These findings provide valuable insights into actively enhancing the stability of rotor systems.
- 23 December 2024
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 147 (7) , 1-12
Study on Dynamic Characteristics of Single-Span Rotor Under Cross-Coupling Stiffness Control on Nondrive End
The sealing-induced cross-coupling stiffness (CCS) often decreases the rotordynamic stability of turbomachinery. In our previous study, an active negative CCS control strategy applied between two bearings in the middle of the rotor was validated to enhance the stability of the rotor system. In this paper, a different approach was taken by applying both positive and negative CCS control strategies to the nondrive end, aiming to investigate their effects on rotordynamic stability using a rotordynamic model. The model represented a single-span centrifugal compressor rotor with CCS at the seal node. The logarithmic decrements and unbalance response of the rotor system were compared under different CCS applications at the nondrive end and in the span. The results demonstrate that applying both positive and negative CCS at the nondrive end can improve system stability, but the positive CCS strategy has limitations, and its applicability is not as extensive as negative CCS. A “critical stiffness” phenomenon emerges when the rotor system is actively stabilized at the nondrive end, resembling critical resonance. Furthermore, when components like seals introduce cross-coupling stiffness out of the span, they contribute to system stabilization. These findings provide valuable insights into actively enhancing the stability of rotor systems.
- Open Access
- 23 February 2024
- Published by Elsevier in Chinese Journal of Mechanical Engineering
- Vol. 37 (1) , 1-12
A Modified Iterative Learning Control Approach for the Active Suppression of Rotor Vibration Induced by Coupled Unbalance and Misalignment
- 23 February 2024
- Published by Elsevier in Chinese Journal of Mechanical Engineering
- Vol. 37 (1) , 1-12
Open AccessA Modified Iterative Learning Control Approach for the Active Suppression of Rotor Vibration Induced by Coupled Unbalance and Misalignment
- Open Access
- 19 December 2023
- Published by Springer Nature in Research Square
Balancing multiple speeds flexible rotors without trial weights using multi-objective optimization
This paper proposes a multi-objective optimization method for the optimal balancing of flexible rotors without using trial weights. Finite elements are first used to develop a dynamic model of the flexible rotor. An optimization method and an inverse identification approach are then used to minimize the objective function by considering constraints and vibration levels of the flexible rotor during balancing. Finally, an optimal balancing scheme is solved by using a genetic algorithm. The optimization process here described consists in a global multi-objective optimization framework transformed into single-objective (SO) and dual-objective (DO) optimizations. Simulations and experiments are carried out on a three-discs flexible rotor balancing rig without trial weights, to benchmark the multi-objective optimization technique proposed here. The results show that the method is efficient to avoiding multiple starts and stops during the balancing process, and also provides an enhanced balancing effect.
- 19 December 2023
- Published by Springer Nature in Research Square
Open AccessBalancing multiple speeds flexible rotors without trial weights using multi-objective optimization
This paper proposes a multi-objective optimization method for the optimal balancing of flexible rotors without using trial weights. Finite elements are first used to develop a dynamic model of the flexible rotor. An optimization method and an inverse identification approach are then used to minimize the objective function by considering constraints and vibration levels of the flexible rotor during balancing. Finally, an optimal balancing scheme is solved by using a genetic algorithm. The optimization process here described consists in a global multi-objective optimization framework transformed into single-objective (SO) and dual-objective (DO) optimizations. Simulations and experiments are carried out on a three-discs flexible rotor balancing rig without trial weights, to benchmark the multi-objective optimization technique proposed here. The results show that the method is efficient to avoiding multiple starts and stops during the balancing process, and also provides an enhanced balancing effect.
- 1 December 2023
- Published by Canadian Science Publishing in Transactions of the Canadian Society for Mechanical Engineering
- Vol. 47 (4) , 626-636
Design and application of a fault diagnosis system for machine tool angle heads based on Boolean matrix filtering and an optimized BP neural network
In this paper, a fault diagnosis method based on Boolean matrix filtering and optimizing backpropagation (BP) neural networks is proposed for angle heads of computer numerical control (CNC) machine tools. The matrix filtering is first carried out with the fault case database and the fault cause symptom Boolean matrix according to the fault types and characteristics of the machine tool angle head. On the basis of the combination of multiple fault causes obtained from the initial filtering, the Euclidean distance method is used to narrow the results of fault cause filtering. The BP neural network model with weight vector is established and optimized to perform an accurate diagnosis. Finally, the fault diagnosis and management system of the angle head of a CNC machine tool, integrating with the Boolean matrix filtering method, Euclidean distance method, and BP neural network model, is developed and implemented with the Python language and QT development framework.
- 1 December 2023
- Published by Canadian Science Publishing in Transactions of the Canadian Society for Mechanical Engineering
- Vol. 47 (4) , 626-636
Design and application of a fault diagnosis system for machine tool angle heads based on Boolean matrix filtering and an optimized BP neural network
In this paper, a fault diagnosis method based on Boolean matrix filtering and optimizing backpropagation (BP) neural networks is proposed for angle heads of computer numerical control (CNC) machine tools. The matrix filtering is first carried out with the fault case database and the fault cause symptom Boolean matrix according to the fault types and characteristics of the machine tool angle head. On the basis of the combination of multiple fault causes obtained from the initial filtering, the Euclidean distance method is used to narrow the results of fault cause filtering. The BP neural network model with weight vector is established and optimized to perform an accurate diagnosis. Finally, the fault diagnosis and management system of the angle head of a CNC machine tool, integrating with the Boolean matrix filtering method, Euclidean distance method, and BP neural network model, is developed and implemented with the Python language and QT development framework.
- 27 August 2023
- Published by Springer Nature
- p. 54-70
Active Suppression of Multi-frequency Vibration of Rotor Based on Adaptive Immersion & Invariant Theory
- 27 August 2023
- Published by Springer Nature
- p. 54-70
Active Suppression of Multi-frequency Vibration of Rotor Based on Adaptive Immersion & Invariant Theory
- 3 May 2023
- Published by Springer Nature in Journal of Mechanical Science and Technology
- Vol. 37 (5) , 2263-2274
Dynamic balancing of multispeed multidisk rotor
- 3 May 2023
- Published by Springer Nature in Journal of Mechanical Science and Technology
- Vol. 37 (5) , 2263-2274
Dynamic balancing of multispeed multidisk rotor