Anto Raj
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Anto Raj has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
Sharath Sridhar
5 shared publicationsSivasubramanian Thirugnanasambandam
5 shared publicationsJohn Evans
4 shared publicationsSeth Gordon
4 shared publicationsThomas Sanders
Department of Industrial and Systems Engineering, Auburn University, Auburn, AL, USA
4 shared publicationsWayne Johnson
Department of Electrical & Electronics Engineering, Auburn University, Alabama 36849, USA
3 shared publications
Latest Publications
- Open Access
- 21 July 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 134194-134208
Assembly Options and Challenges for Electronic Products With Lead-Free Exemption
Due to safety and reliability concerns, various classes and/or applications of electronic products are excluded from the European Union’s Restriction of Hazardous Substances (RoHS) regulations requiring the elimination of lead (Pb). However, the majority of electronic devices are now Pb-free. As a result, manufacturers attempting to maintain tin-lead (SnPb) based electronics face an increasing challenge to procure parts and products with Pb-based solder. This paper reviews the challenges of producing Pb-based electronic equipment, the reliability concerns with Pb-free electronics, and the options that manufacturers have for maintaining reliable, Pb-based production. In particular, the paper examines mixed soldering processes and the re-balling of Pb-free electronic parts. While Pb-free electronics present risks, it is our conclusion that the risks are manageable and are lower than those incurred by maintaining an increasingly obsolete Pb-based manufacturing process.
- 21 July 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 134194-134208
Open AccessAssembly Options and Challenges for Electronic Products With Lead-Free Exemption
Due to safety and reliability concerns, various classes and/or applications of electronic products are excluded from the European Union’s Restriction of Hazardous Substances (RoHS) regulations requiring the elimination of lead (Pb). However, the majority of electronic devices are now Pb-free. As a result, manufacturers attempting to maintain tin-lead (SnPb) based electronics face an increasing challenge to procure parts and products with Pb-based solder. This paper reviews the challenges of producing Pb-based electronic equipment, the reliability concerns with Pb-free electronics, and the options that manufacturers have for maintaining reliable, Pb-based production. In particular, the paper examines mixed soldering processes and the re-balling of Pb-free electronic parts. While Pb-free electronics present risks, it is our conclusion that the risks are manageable and are lower than those incurred by maintaining an increasingly obsolete Pb-based manufacturing process.
- 1 May 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 2309-2317
Reliability of Micro-Alloyed SnAgCu Based Solder Interconnections for Various Harsh Applications
In this study, the reliability of doped solder pastes on 15mm BGA under various accelerated tests was investigated. The primary goal is to compare the solder paste performances under different tests, and ultimately, find a manufacturable solder paste that will demonstrate better reliability under different harsh applications. A total of four tests (thermal cycling, thermal shock, vibration, drop) were conducted on 15mm CABGA208 with three doped solder pastes (Innolot, CycloMax, Ecolloy) and one baseline solder paste SAC305 in order to understand the effect of doped solder paste on conventional packages. Test vehicles were built based on the types of test, and two designs were applied, one for thermal cycling, and another for mechanical cycling. Test vehicles were subjected to the corresponding test conditions with different devices to access the solder paste performances. It was found that Innolot solder paste performed better in thermal cycling, and SAC305 and Ecolloy solder pastes performed better in mechanical cycling.
- 1 May 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 2309-2317
Reliability of Micro-Alloyed SnAgCu Based Solder Interconnections for Various Harsh Applications
In this study, the reliability of doped solder pastes on 15mm BGA under various accelerated tests was investigated. The primary goal is to compare the solder paste performances under different tests, and ultimately, find a manufacturable solder paste that will demonstrate better reliability under different harsh applications. A total of four tests (thermal cycling, thermal shock, vibration, drop) were conducted on 15mm CABGA208 with three doped solder pastes (Innolot, CycloMax, Ecolloy) and one baseline solder paste SAC305 in order to understand the effect of doped solder paste on conventional packages. Test vehicles were built based on the types of test, and two designs were applied, one for thermal cycling, and another for mechanical cycling. Test vehicles were subjected to the corresponding test conditions with different devices to access the solder paste performances. It was found that Innolot solder paste performed better in thermal cycling, and SAC305 and Ecolloy solder pastes performed better in mechanical cycling.
- 4 April 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 9 (6) , 1082-1093
Thermal Shock Reliability of Isothermally Aged Doped Lead-Free Solder With Semiparametric Estimation
This paper offers a statistical methodology for evaluating Pb-free solder alloy performance for high-reliability products using Cox proportional regression analysis and provides a detailed application of the technique based upon a 15-mm BGA package. Specifically, the effects of doping SAC305 solder balls with small amounts of Bi, Co, In, Mn, Ni, and Sb either directly or from the solder paste used for assembly have been studied. The test results have led to a down-selection of optimum material combinations that offer a potential solution to the wellknown material degradation of SAC305 solder alloys with aging. The test conditions had two different time/temperature periods: 10 days at 25 °C and an accelerated condition of 180 days at 125 °C. Each test board was temperature shocked 3000 times (-40 °C-125 °C) with a 15-min thermal profile (5-min dwell time and 2.5-min transition time). The electrical continuity of solder interconnect was examined during the tests, and the effect of solder doping and aging on the failure rate (hazard rate) were assessed at 90% confidence level using the proportional hazard model. We found that the solder doping combination, aging time and temperature, and the interactions between these parameters have significant impacts on the failure rate. BGA with Sn-Ag- Cu doped with Sb, Bi, Co, and Ni can significantly reduce the failure rate after aging with a 90% level of confidence. The failure analysis shows recrystallized assisted crack nucleation in the solder joints.
- 4 April 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 9 (6) , 1082-1093
Thermal Shock Reliability of Isothermally Aged Doped Lead-Free Solder With Semiparametric Estimation
This paper offers a statistical methodology for evaluating Pb-free solder alloy performance for high-reliability products using Cox proportional regression analysis and provides a detailed application of the technique based upon a 15-mm BGA package. Specifically, the effects of doping SAC305 solder balls with small amounts of Bi, Co, In, Mn, Ni, and Sb either directly or from the solder paste used for assembly have been studied. The test results have led to a down-selection of optimum material combinations that offer a potential solution to the wellknown material degradation of SAC305 solder alloys with aging. The test conditions had two different time/temperature periods: 10 days at 25 °C and an accelerated condition of 180 days at 125 °C. Each test board was temperature shocked 3000 times (-40 °C-125 °C) with a 15-min thermal profile (5-min dwell time and 2.5-min transition time). The electrical continuity of solder interconnect was examined during the tests, and the effect of solder doping and aging on the failure rate (hazard rate) were assessed at 90% confidence level using the proportional hazard model. We found that the solder doping combination, aging time and temperature, and the interactions between these parameters have significant impacts on the failure rate. BGA with Sn-Ag- Cu doped with Sb, Bi, Co, and Ni can significantly reduce the failure rate after aging with a 90% level of confidence. The failure analysis shows recrystallized assisted crack nucleation in the solder joints.
- 1 May 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 34 (10879870) , 1191-1201
Proportional Hazard Model of doped low creep lead free solder paste under thermal shock
In this experiment, the thermal performance of various lead-free doped solder paste alloys on leaded and leadless packages on laminate substrates were investigated. The Primary Goal of this test is to find a manufactureable solder paste that will mitigate the effects of aging on lead free solder joints. The results discuss the effects of different paste materials, the effects of doping level, and reflow profile on the resulting reliability of a variety of surface mount components. The test vehicle consists of 35 mm (PBGA 1156), 31mm (SBGA 304), 15 mm (CABGA 208) and 6mm (CABGA 36) ball grid array packages with 1.0 mm, 1.27mm and 0.8mm pitch, respectively. Additionally, a leadless 5mm QFN package (MLF 20) with 0.65mm pitch and 2512 SMRs are included in order to understand the effect of doped solder paste on conventional packages. The test boards are built with (a) three different reflow profiles on 6 mil stencil thickness, and (b) one reflow profile on a 4 mil stencil thickness, to study the differences in doping volume effects of the new doped alloys. The test vehicles were subjected to high temperature accelerated life test (HALT) in liquid shock (thermal shock) testing. Each test vehicle underwent 3000 thermal cycles with peak temperatures of -40°C to +125°C on a 15-minute thermal profile (5 minutes dwell time and 2.5 minutes transition time). Reliability of the test packages were determined from the ability of the components and solder interconnects to withstand the thermal stresses induced by alternating high and low temperature extremes. The time to failure were right censored after 3000 cycles. The experimental variables include paste materials, solder paste manufacturer, Reflow profile, stencil thickness, packages and component solder sphere. The response variable used in this test is Time to Failure (cycles). The effect of experimental variables on Time to Failure were assessed at 5% level of significance using Proportional Hazard Model. It is found that all the experimental variables except reflow profile have significant impact on the Time to Failure. Since this experimental data consists of heavy censoring, Censored Quantile Regression model is developed and it is compared with Proportional Hazard Model.
- 1 May 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 34 (10879870) , 1191-1201
Proportional Hazard Model of doped low creep lead free solder paste under thermal shock
In this experiment, the thermal performance of various lead-free doped solder paste alloys on leaded and leadless packages on laminate substrates were investigated. The Primary Goal of this test is to find a manufactureable solder paste that will mitigate the effects of aging on lead free solder joints. The results discuss the effects of different paste materials, the effects of doping level, and reflow profile on the resulting reliability of a variety of surface mount components. The test vehicle consists of 35 mm (PBGA 1156), 31mm (SBGA 304), 15 mm (CABGA 208) and 6mm (CABGA 36) ball grid array packages with 1.0 mm, 1.27mm and 0.8mm pitch, respectively. Additionally, a leadless 5mm QFN package (MLF 20) with 0.65mm pitch and 2512 SMRs are included in order to understand the effect of doped solder paste on conventional packages. The test boards are built with (a) three different reflow profiles on 6 mil stencil thickness, and (b) one reflow profile on a 4 mil stencil thickness, to study the differences in doping volume effects of the new doped alloys. The test vehicles were subjected to high temperature accelerated life test (HALT) in liquid shock (thermal shock) testing. Each test vehicle underwent 3000 thermal cycles with peak temperatures of -40°C to +125°C on a 15-minute thermal profile (5 minutes dwell time and 2.5 minutes transition time). Reliability of the test packages were determined from the ability of the components and solder interconnects to withstand the thermal stresses induced by alternating high and low temperature extremes. The time to failure were right censored after 3000 cycles. The experimental variables include paste materials, solder paste manufacturer, Reflow profile, stencil thickness, packages and component solder sphere. The response variable used in this test is Time to Failure (cycles). The effect of experimental variables on Time to Failure were assessed at 5% level of significance using Proportional Hazard Model. It is found that all the experimental variables except reflow profile have significant impact on the Time to Failure. Since this experimental data consists of heavy censoring, Censored Quantile Regression model is developed and it is compared with Proportional Hazard Model.
- 1 May 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 501-506
Drop impact reliability testing of isothermally aged doped low creep lead-free solder paste alloys
Board level drop impact testing is one of the most important modes of evaluating the reliability of assemblies. This study examines the drop impact performance of no aged and isothermally aged flip chip packages on laminate assemblies for various doped lead-free solder paste alloys. A potential solution to replace the industrial standard solder paste Sn96.5 Ag3.0 Cu0.5 (SAC305) was carried out. The test vehicle consisted of 16 ball grid array packages (BGA) which were 15mm chip array ball grid array's (CABGA208) with perimeter solder balls on 0.8mm pitch. In this experimental study, SnAgCu solder bumps and SAC305 solder paste were selected to be the baseline, Solder pastes with 12 different dopant levels were investigated in comparison with the baseline to determine their reliability. Two sets of printed circuit boards (PCB) were manufactured, the first being no aged and the second set of boards were isothermally aged at 125C for 6 months and then tested. The boards were further categorized into 3 different reflow temperatures and 2 different stencil thicknesses, 4 mil and 6 mil respectively. JEDEC BS111 test standard was followed to conduct the drop testing where the half sine impact pulse duration of 0.5ms with peak acceleration at 1500G's was maintained. The boards were subjected to accelerated life testing where the test end state was 300 drops, and the data was collected at an interval of every 20 drops. The results of non-aged and aged samples were categorized and compared using data analytics and Weibull analysis. Failure analysis was carried out to determine best solder paste, solder ball, reflow temperature profile and stencil size for the future work.
- 1 May 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 501-506
Drop impact reliability testing of isothermally aged doped low creep lead-free solder paste alloys
Board level drop impact testing is one of the most important modes of evaluating the reliability of assemblies. This study examines the drop impact performance of no aged and isothermally aged flip chip packages on laminate assemblies for various doped lead-free solder paste alloys. A potential solution to replace the industrial standard solder paste Sn96.5 Ag3.0 Cu0.5 (SAC305) was carried out. The test vehicle consisted of 16 ball grid array packages (BGA) which were 15mm chip array ball grid array's (CABGA208) with perimeter solder balls on 0.8mm pitch. In this experimental study, SnAgCu solder bumps and SAC305 solder paste were selected to be the baseline, Solder pastes with 12 different dopant levels were investigated in comparison with the baseline to determine their reliability. Two sets of printed circuit boards (PCB) were manufactured, the first being no aged and the second set of boards were isothermally aged at 125C for 6 months and then tested. The boards were further categorized into 3 different reflow temperatures and 2 different stencil thicknesses, 4 mil and 6 mil respectively. JEDEC BS111 test standard was followed to conduct the drop testing where the half sine impact pulse duration of 0.5ms with peak acceleration at 1500G's was maintained. The boards were subjected to accelerated life testing where the test end state was 300 drops, and the data was collected at an interval of every 20 drops. The results of non-aged and aged samples were categorized and compared using data analytics and Weibull analysis. Failure analysis was carried out to determine best solder paste, solder ball, reflow temperature profile and stencil size for the future work.
- 1 May 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1209-1217
Proportional Hazard Model of doped low creep lead free solder paste under vibration
In this experiment, the vibrational performance of various lead-free doped (micro-alloyed) solder paste alloys on 15mm BGA packages were investigated. The Primary Goal of this test is to find a manufactureable solder paste that will mitigate the effects of aging on lead free solder joints. The results discuss the effects of different paste materials, the effects of doping level, and reflow profile on the resulting reliability of a variety of surface mount components. The test vehicle consists of 15 mm (CABGA 208) ball grid array packages with 0.8mm pitch, a leadless 5mm QFN package (MLF 20) with 0.65mm pitch and 2512 SMRs in order to understand the effect of doped solder paste on conventional packages. The test boards are built with three different reflow profiles and two different stencil thicknesses 8 mil (6 mil with overprint) and 4 mil to study the differences in doping effect of the new doped alloys. The test boards were built to withstand JEDEC JESD22-B103B standards of high stress test in vibrational shaker table to assess the solder joint performance. The test vehicle was subjected to accelerated life test of severe random vibration per board. The reliability of the component is determined by the ability of the components to withstand vibration as a result of motion produced by field operations. The deleterious effect of the mechanical loading of BGA's on the characteristic fatigue lifetime is reported. The time to failure were right censored after 20 hours. The experimental variables include paste materials, solder paste manufacturer, reflow profile, stencil thickness and component solder sphere. The response variable used in this test is Time to Failure (hours). The effect of experimental variables on Time to Failure were assessed at 5% level of significance using Cox Proportional Hazard Model. It is found that all the experimental variables have significant impact on the Time to Failure.
- 1 May 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1209-1217
Proportional Hazard Model of doped low creep lead free solder paste under vibration
In this experiment, the vibrational performance of various lead-free doped (micro-alloyed) solder paste alloys on 15mm BGA packages were investigated. The Primary Goal of this test is to find a manufactureable solder paste that will mitigate the effects of aging on lead free solder joints. The results discuss the effects of different paste materials, the effects of doping level, and reflow profile on the resulting reliability of a variety of surface mount components. The test vehicle consists of 15 mm (CABGA 208) ball grid array packages with 0.8mm pitch, a leadless 5mm QFN package (MLF 20) with 0.65mm pitch and 2512 SMRs in order to understand the effect of doped solder paste on conventional packages. The test boards are built with three different reflow profiles and two different stencil thicknesses 8 mil (6 mil with overprint) and 4 mil to study the differences in doping effect of the new doped alloys. The test boards were built to withstand JEDEC JESD22-B103B standards of high stress test in vibrational shaker table to assess the solder joint performance. The test vehicle was subjected to accelerated life test of severe random vibration per board. The reliability of the component is determined by the ability of the components to withstand vibration as a result of motion produced by field operations. The deleterious effect of the mechanical loading of BGA's on the characteristic fatigue lifetime is reported. The time to failure were right censored after 20 hours. The experimental variables include paste materials, solder paste manufacturer, reflow profile, stencil thickness and component solder sphere. The response variable used in this test is Time to Failure (hours). The effect of experimental variables on Time to Failure were assessed at 5% level of significance using Cox Proportional Hazard Model. It is found that all the experimental variables have significant impact on the Time to Failure.
- 1 May 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 920-923
The study of vibrational performance on different doped low creep lead free solder paste and solder ball grid array packages
Relatively little is known about the performance of the doped Ball Grid Array (BGA) packages used in semiconductor industries, even though newer products are widely being introduced to the market. This work experimentally investigates the doping effects of the BGA packages with SAC 305 alloys, caused by the vibration loading. This experiment focuses on the vibration fatigue life of 15 mm CABGA packages with 208 perimeter solder balls on a 0.8 mm pitch. The test boards were built to withstand JEDEC JESD22-B103B standards of high stress test in vibrational shaker table to assess the solder joint performance. The test boards are built with three different reflow profiles and two different stencil thicknesses 8 mil (6 mil with overprint) and 4 mil to study the differences in doping effect of the new doped alloys. The WLCSP assembly was subjected to accelerated life test of severe random vibration per board. The reliability of the component is determined by the ability of the components to withstand vibration as a result of motion produced by field operations. The deleterious effect of the mechanical loading of BGA's on the characteristic fatigue lifetime is reported. The results show that the material characteristics has a direct impact on the total time to failure. The results show that the Time-To-Failure (TTF) of the solder joint decreases with doping. The effectiveness of this characteristics was demonstrated with promising results through vibration testing of different lead free low creep alloys. This paper concludes with discussion of the deterioration intensity aging has on SAC alloys and the change in reliability due to doping.
- 1 May 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 920-923
The study of vibrational performance on different doped low creep lead free solder paste and solder ball grid array packages
Relatively little is known about the performance of the doped Ball Grid Array (BGA) packages used in semiconductor industries, even though newer products are widely being introduced to the market. This work experimentally investigates the doping effects of the BGA packages with SAC 305 alloys, caused by the vibration loading. This experiment focuses on the vibration fatigue life of 15 mm CABGA packages with 208 perimeter solder balls on a 0.8 mm pitch. The test boards were built to withstand JEDEC JESD22-B103B standards of high stress test in vibrational shaker table to assess the solder joint performance. The test boards are built with three different reflow profiles and two different stencil thicknesses 8 mil (6 mil with overprint) and 4 mil to study the differences in doping effect of the new doped alloys. The WLCSP assembly was subjected to accelerated life test of severe random vibration per board. The reliability of the component is determined by the ability of the components to withstand vibration as a result of motion produced by field operations. The deleterious effect of the mechanical loading of BGA's on the characteristic fatigue lifetime is reported. The results show that the material characteristics has a direct impact on the total time to failure. The results show that the Time-To-Failure (TTF) of the solder joint decreases with doping. The effectiveness of this characteristics was demonstrated with promising results through vibration testing of different lead free low creep alloys. This paper concludes with discussion of the deterioration intensity aging has on SAC alloys and the change in reliability due to doping.