TYTakehiro Yoshida

Takehiro Yoshida

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Takehiro Yoshida has a total of 61 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Breakdown phenomenon dependences on the number and positions of threading dislocations in vertical p-n junction GaN diodes

    by Hiroshi Ohta, Naomi Asai, Fumimasa Horikiri, Yoshinobu Narita, Takehiro Yoshida, Tomoyoshi Mishima

    The correlation between current-voltage ( I–V ) characteristics and threading dislocations was evaluated using p-n junction diodes on a high-quality GaN substrate with an average threading dislocation density (TDD) ≤ 4 × 10 5 cm −2 using the newly developed maskless 3D (M-3D) method. For the forward I–V characteristics, it was found that the “on” resistance ( R on ) increased as the number of dislocations in the diode increased. This result indicates that reducing the number of dislocations is effective in improving the forward I–V characteristics. On the other hand, for the reverse I–V characteristics, it was found that there was no clear correlation between the breakdown voltage ( V B ) and the number of dislocations. Also, the p-n diode’s destruction point and dislocation position did not match in almost all of the measured p-n diodes. These results suggest that dislocation has very little effect on V B and the p-n diode destruction.


  • Impact of threading dislocations in GaN p–n diodes on forward I – V characteristics

    by Hiroshi Ohta, Naomi Asai, Fumimasa Horikiri, Yoshinobu Narita, Takehiro Yoshida, Tomoyoshi Mishima

    The correlation between on-resistance ( R on ) and the number of dislocations under the anode electrode was evaluated using p–n junction diodes on a high-quality GaN substrate with an average threading dislocation density of ≤4 × 10 5 cm −2 by a newly developed maskless 3D method. A positive correlation was observed between R on and the number of dislocations. The microdiodes with an anode electrode size of diameter 6 μ m of having one dislocation and no dislocation under the anode electrode were evaluated to estimate the current reduction by one dislocation, which was derived to be about 0.37 mA at a forward voltage of 5 V. The reduction of the forward current seemed to be caused by non-radiative recombination centers around dislocation lines which weakened the photon recycling effects and conductivity modulation. On the other hand, there was no clear correlation between the breakdown voltage and the number of dislocations.


  • Open Access

    GaN substrates having a low dislocation density and a small off-angle variation prepared by hydride vapor phase epitaxy and maskless-3D

    by Takehiro Yoshida, Masatomo Shibata

    To produce high-quality GaN (0001) substrates with a low threading dislocation density (TDD) and a small off-angle variation, we have developed a technique named the “maskless-3D method.” This method, which is applied during GaN boule growth by hydride vapor phase epitaxy (HVPE), induces three-dimensional (3D) growth on a normal GaN (0001) seed substrate. We showed that by an appropriate choice of HVPE conditions, and without using a mask, the 3D growth shape was controlled to eliminate the c-plane and thereby suppress the propagation of dislocations from the seed. Subsequently, two-dimensional (2D) growth was carried out on the 3D structure. This 2D growth area was machined to produce a 2 inch GaN substrate with a TDD of about 4 × 105 cm−2 and an off-angle variation of 0.05°. We also confirmed that it was possible to insert the 3D growth area twice, thereby further reducing the TDD to 104 cm−2.


  • Roles of carbon impurities and intrinsic nonradiative recombination centers on the carrier recombination processes of GaN crystals

    by Kazunobu Kojima, Fumimasa Horikiri, Yoshinobu Narita, Takehiro Yoshida, Hajime Fujikura, Shigefusa F. Chichibu


  • Two-Step Mesa Structure GaN p-n Diodes With Low ON-Resistance, High Breakdown Voltage, and Excellent Avalanche Capabilities

    by Hiroshi Ohta, Naomi Asai, Fumimasa Horikiri, Yoshinobu Narita, Takehiro Yoshida, Tomoyoshi Mishima

    Vertical structure GaN power devices fabricated on freestanding GaN substrates have high potentials in ideally efficient energy conversion systems. This letter describes successful acquisition of high avalanche capabilities for high breakdown voltage GaN p-n junction diodes. We have already reported the high avalanche capability by applying a punch-through structure in p-GaN layer, however; the structure caused a drawback of increase in on-resistance and turn-on voltage. By applying a newly developed two-step mesa structure consisting of the first inner mesa with partially thinned p-GaN layer and the second outer mesa etched to n-GaN drift layer, the high avalanche capabilities with reversible current-voltage characteristics have been realized at high breakdown voltages of 4.7-4.8 kV without sacrificing the forward I-V characteristics. The two-step mesa structure transferred the position of the peak electric field in the p-n junction from the dry-etch damaged second outer mesa to the first mesa covered by the thinned p-GaN layer, which could lead the mild breakdown. The high avalanche capability was obtained with good reproducibility regardless of the anode electrode diameter. This structure can contribute to the construction of robust power systems.


  • Growth of InGaN films on hardness-controlled bulk GaN substrates

    by Masatomo Sumiya, Kiyotaka Fukuda, Hajime Fujikura, Taichiro Konno, Takayuki Suzuki, Tetsuji Fujimoto, Takehiro Yoshida, Shigenori Ueda, Kenji Watanabe, Tsuyoshi Ohnishi, et al.

    We carried out an evaluation of the crystalline quality of bulk GaN substrates and the properties of InGaN films grown on them. The Urbach energy estimated by photothermal deflection spectroscopy and the tail states near the valence band maximum determined by hard x-ray photoemission spectroscopy were larger for hardness-controlled bulk GaN (hard GaN) than those for conventional bulk GaN (conventional GaN). However, InGaN on hard GaN grows in a step-flow-like mode, while InGaN grown on conventional GaN exhibits spiral-like growth. The photoluminescence decay at room temperature for InGaN grown on the hard GaN was 470 ps, compared with 50 ps for that grown on the conventional GaN. This can be attributed to the suppression of spiral-like growth due to the resistance to deformation of the hard GaN. These results indicate that substrate hardness is one of the most important factors for III–V nitride growth on the bulk GaN substrate.


  • Open Access

    Deep-level transient spectroscopy studies of electron and hole traps in n-type GaN homoepitaxial layers grown by quartz-free hydride-vapor-phase epitaxy

    by Kazutaka Kanegae, Hajime Fujikura, Yohei Otoki, Taichiro Konno, Takehiro Yoshida, Masahiro Horita, Tsunenobu Kimoto, Jun Suda

    We studied deep levels in quartz-free hydride-vapor-phase epitaxy (QF-HVPE)-grown homoepitaxial n-type GaN layers within which three electron and eight hole traps were detected. The dominant electron and hole traps observed in the QF-HVPE-grown GaN layers were E3 (EC − 0.60 eV) and H1 (EV + 0.87 eV), respectively. We found that the E3 trap density of QF-HVPE-grown GaN (∼1014 cm−3) was comparable with that of MOVPE-grown GaN layers, whereas the H1 trap density of QF-HVPE-grown GaN (∼1014 cm−3) was much smaller than that of an MOVPE-grown GaN layer with a low-residual-carbon growth condition. A detailed analysis of the QF-HVPE-grown GaN layers revealed that the H1 trap density is almost equal to the carbon impurity concentration and other impurities that compensate the Si donors besides the carbon impurity were hardly detected in the QF-HVPE-grown GaN layers.


  • Non-polar GaN thin films deposition on glass substrate at low temperatures by conventional RF sputtering

    by Marolop Simanullang, Zehua Wang, Nao Kawakami, Ryu Ogata, Takehiro Yoshida, Mutsumi Sugiyama


  • Excellent wet etching technique using pulsed anodic oxidation for homoepitaxially grown GaN layer

    by Fumimasa Horikiri, Yoshinobu Narita, Takehiro Yoshida

    In vertical devices containing GaN homoepitaxial layers on free-standing GaN substrates, damageless trench fabrication is a key issue in device processes. We used a free-standing GaN substrate with a dislocation density of 10 6 cm −2 and applied pulsed photo-electrochemical (PEC) etching to a homoepitaxially grown n − -GaN layer. Although the reported results of GaN-on-sapphire show poor etching uniformity caused by the high dislocation density in the range of 10 8 to 10 9 cm −2 , the etched surface of GaN-on-GaN obtained by pulsed PEC etching was almost flat at a low etching voltage. The photoluminescence intensity indicated that the etched surface does not have etching damage. Furthermore, we successfully obtained wet-etched mesa diodes with a high breakdown voltage of more than 3 kV and a high yield. These results indicate the applicability of pulsed PEC etching to the damageless trench fabrication of vertical GaN power devices using low-dislocation-density GaN substrates.


  • Macrodefect-free, large, and thick GaN bulk crystals for high-quality 2–6 in. GaN substrates by hydride vapor phase epitaxy with hardness control

    by Hajime Fujikura, Taichiro Konno, Takayuki Suzuki, Toshio Kitamura, Tetsuji Fujimoto, Takehiro Yoshida

    On the basis of a novel crystal hardness control, we successfully realized macrodefect-free, large (2–6 in.) and thick + c -oriented GaN bulk crystals by hydride vapor phase epitaxy. Without the hardness control, the introduction of macrodefects including inversion domains and/or basal-plane dislocations seemed to be indispensable to avoid crystal fracture in GaN growth with millimeter thickness. However, the presence of these macrodefects tended to limit the applicability of the GaN substrate to practical devices. The present technology markedly increased the GaN crystal hardness from below 20 to 22 GPa, thus increasing the available growth thickness from below 1 mm to over 6 mm even without macrodefect introduction. The 2 and 4 in. GaN wafers fabricated from these crystals had extremely low dislocation densities in the low- to mid-10 5 cm −2 range and low off-angle variations (2 in.: <0.1°; 4 in.: ∼0.2°). The realization of such high-quality 6 in. wafers is also expected.