UWUmmara Waheed

Ummara Waheed

*This is an algorithmically generated author record based on publicly available information.

Ummara Waheed has a total of 77 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    CRISPR and Gene Editing in Cereals and Pseudocereals: Current Progress and Future Directions

    by Akash Fatima, Zareen Sarfraz, Muhammad Ali Raza, Sajad Hussain, Akhtar Hameed, Fawad Zafar Ahmad Khan, Sehrish Ijaz, Ummara Waheed Khan

    CRISPR/Cas-based gene editing has rapidly revolutionized plant breeding, offering precise, efficient, and versatile tools to enhance traits in staple and emerging crops. This chapter explores the application of CRISPR and related gene-editing technologies in cereals and pseudocereals, focusing on advancements in improving yield, nutritional quality, biotic and abiotic stress tolerance, and grain pigmentation. The chapter begins with an overview of CRISPR/Cas systems, including Cas9, Cas12, and base editing tools, tailored for plant applications, especially during 2018–2025. It highlights successful case studies in major cereals such as rice, maize, and wheat, where gene editing has enabled the modification of key agronomic traits. Parallel progress in pseudocereals such as quinoa, buckwheat, and amaranth, though still emerging, is discussed in light of recent breakthroughs and bottlenecks, such as transformation efficiency and regulatory hurdles. Emphasis is placed on the integration of CRISPR with omics technologies and AI-assisted gene discovery to accelerate functional genomics and breeding pipelines. The chapter also considers ethical, regulatory, and public acceptance aspects of gene-edited crops, with special attention to policies in South Asia and developing economies. Finally, future directions are proposed to maximize the potential of CRISPR in underutilized pseudocereals, contributing to food security and climate-resilient agriculture.

  • Understanding the heat stress mitigation mechanisms during pollen development in Gossypium hirsutum L.

    by Rabia Habib, Zulqurnain Khan, Abdel-Halim Ghazy, Shoaib Ur Rehman, Kotb A. Attia, Maria Siddique, Sajid Fiaz, Abdullah A. Al-Doss, Muhammad Abu Bakar Saddique, Ummara Waheed

    Cotton (Gossypium hirsutum L.) yield is threatened by heat stress that impair pollen development and reduce reproductive success. This study aimed to identify tolerant genotypes by integrating physiological screening with molecular analysis of key pollen development genes. Twenty cotton genotypes were evaluated in a randomized complete block design (RCBD) with three replicates at the research area of MNS-University of Agriculture Multan under normal and heat stress conditions for two consecutive years. Physiological parameters including 2,3,5 triphenyl-tetrazolium chloride (TTC), acetocarmine-based pollen viability and relative cell membrane thermo-stability were measured to assess heat tolerance and sensitive genotypes. Heat tolerant genotypes including UAM-20, FH-492, MNH-1035 and Cyto-177 exhibited higher pollen viability and reduced cell membrane injury under heat stress. Whereas, FH-901, CIM-448, JS-212 and CRIS-5 A were identified as heat sensitive genotypes due to low pollen viability and higher cell membrane injury. Expression analysis of GhADF7 and GhFLA14 through RT-PCR demonstrated differential expression between heat tolerant and sensitive genotypes. Tolerant genotypes showed higher expression of both genes under heat stress as compared to the sensitive genotypes. These results suggest that integration of physiological screening and gene expression profiling provides a reliable approach to screen heat tolerant genotypes and highlights GhADF7 and GhFLA14 as key factors enabling reproductive thermotolerance.

  • Open Access

    Genome-wide identification of ADK gene family associated with heat stress tolerance in chili (Capsicum annuum L.)

    by Saad Farid Usmani, Muhammad Abu Bakar Saddique, Sajid Fiaz, Muhammad Hammad Nadeem Tahir, Ummara Waheed, Muataz A. Abdalla, Umsalama A. H. Ahmed, Badr Alharthi, Hafiz Nazar Farid, Rui Pan, et al.

    Chili (Capsicum annuum), also known as hot pepper, is a major vegetable crop in the Solanaceae family. It originated from C. annuum var. minimum, native to

  • Field evaluation of insecticides against pink bollworm, Pectinophora gossypiella and their effect on beneficial fauna

    by M. Ishtiaq, Mohsin Qayyum, M. Abdul Majid, Ummara Waheed, M. Akram, Shafqat Saeed, M. Asif Farooq, Denis J. Wright


  • Understanding the role of the fructose-1,6-bisphosphatase gene for enhancing the photosynthetic rate in Arabidopsis thaliana

    by Fatima Gulzar, Raza Ahmad, Suk-Yoon Kwan, Zulqurnain Khan, Sulaiman Ali Alharbi, Mohmmad Maroof Shah, Shoaib Ur Rehman, Maria Siddique, Mohammad Javed Ansari, Irum Shahzadi, et al.

    Transgenic Arabidopsis thaliana (ecotype Columbia) was successfully transformed with the gene fructose-1,6-bisphosphatase (FBPase) and named as AtFBPase plants. Transgenic plants exhibited stable transformation, integration and significantly higher expressions for the transformed gene. Morphological evaluation of transgenic plants showed increased plant height (35 cm), number of leaves (25), chlorophyll contents (28%), water use efficiency (increased from 1.5 to 2.6 μmol CO2 μmol−1 H2O) and stomatal conductance (20%), which all resulted in an enhanced photosynthetic rate (2.7 μmol m−2 s−1) compared to wild type plants. This study suggests the vital role of FBPase gene in the modification of regulatory pathways to enhance the photosynthetic rate, which can also be utilised for economic crops in future.


  • Open Access

    Genome-Wide Characterization and Sequence Polymorphism Analyses of Glycine max Fibrillin (FBN) Revealed Its Role in Response to Drought Condition

    by Muhammad Zeshan Zafer, Muhammad Hammad Nadeem Tahir, Zulqurnain Khan, Muhammad Sajjad, Xiangkuo Gao, Muhammad Amir Bakhtavar, Ummara Waheed, Maria Siddique, Zhide Geng, Shoaib Ur Rehman

    The fibrillin (FBN) gene family is widely distributed in all photosynthetic organisms. Members of this gene family are involved in plant growth and development and their response to various biotic and abiotic stress factors. In this study, 16 members of FBN were identified in Glycine max and characterized by using different bioinformatics tools. Phylogenetic analysis classified FBN genes into seven groups. The presence of stress-related cis-elements in the upstream region of GmFBN highlighted their role in tolerance against abiotic stresses. To further decipher the function, physiochemical properties, conserved motifs, chromosomal localization, subcellular localization, and cis-acting regulatory elements were also analyzed. Gene expression analysis based on FPKM values revealed that GmFBNs greatly enhanced soybean drought tolerance and controlled the expression of several genes involved in drought response, except for GmFBN-4, GmFBN-5, GmFBN-6, GmFBN-7 and GmFBN-9. For high throughput genotyping, an SNP-based CAPS marker was also developed for the GmFBN-15 gene. The CAPS marker differentiated soybean genotypes based on the presence of either the GmFBN-15-G or GmFBN-15-A alleles in the CDS region. Association analysis showed that G. max accessions containing the GmFBN-15-A allele at the respective locus showed higher thousand seed weight compared to accessions containing the GmFBN-15-G allele. This research has provided the basic information to further decipher the function of FBN in soybean.


  • Open Access

    In vitro Production of Double Haploid in Maize (Zea mays L.) Through Pollen Culture

    by Summia Muneer, Muhammad Asaf Khan, Ambreen Naz, Ummara Waheed

    Maize (Zea mays L.) has a distinct genetic system and is recalcitrant to generate haploid and subsequently double haploid plants from pollen grains in aseptic conditions. It is a technique with lot of potential for producing pure lines for crop improvement and introducing the desired variability through modification in biochemical and applied genetics. The experiment was conducted using different doses of 2,4-Dichlorophenoxyacetic acid (2, 4-D), Indole-3-acetic acid (IAA), 6-Benzylaminopurine(BAP), Zeatin(ZEA), Kinetin and Naphthalene Acetic Acid(NAA) ranging from 0.5 mg/L to 5 mg/L for the callus induction and plantlet regeneration. The callus was sub-cultured for double haploid induction with doses of 100–500 mg/l colchicine for 7h, 12h and 7 days. Microscopic examination and morphological identification were proposed to check ploidy level. The results exhibited the callus formation at 1, 2 and 3 mg/l concentrations of 2, 4-D and IAA respectively. Based on the time required for the 2, 4-D, callus induction at the concentration of 2mg/l exhibited (47 days) and at the same concentration of IAA exhibited the minimum days of callus induction (34 days). The colchicine treated pollen derived callus regenerated into roots and shoots on IAA and BAP with 3mg/l and 2mg/l respectively. In contrast to pollen derived callus, colchicine treated seed callus gave better results. Double haploid plant produced successfully through in vitro culture of pollen. Current study will be helpful for the achievement of homozygosity in relatively less time and varietal improvement for desired traits.

  • Open Access

    Antioxidant, Cytotoxic, and Antimicrobial Potential of Silver Nanoparticles Synthesized using Tradescantia pallida Extract

    by Irum Shahzadi, Syed Munawar Aziz Shah, Mohammad Maroof Shah, Tariq Ismail, Nighat Fatima, Maria Siddique, Ummara Waheed, Ayesha Baig, Aisha Ayaz

    Silver nanoparticles have received much attention, due to their wide range of biological applications as an alternative therapy for disease conditions utilizing the nanobiotechnology domain for synthesis. The current study was performed to examine the antioxidant, anticancer, antibacterial, and antifungal potential of biosynthesized silver nanoparticles (TpAgNPs) using plant extract. The TpAgNPs were produced by reacting the Tradescantia pallida extract and AgNO3 solution in nine various concentration ratios subjected to bioactivities profiling. According to the current findings, plant extract comprising phenolics, flavonoids, and especially anthocyanins played a critical role in the production of TpAgNPs. UV–visible spectroscopy also validated the TpAgNP formation in the peak range of 401–441 nm. Further, the silver ion stabilization by phytochemicals, face-centered cubic structure, crystal size, and spherical morphology of TpAgNPs were analyzed by FTIR, XRD, and SEM. Among all TpAgNPs, the biosynthesized TpAgNP6 with a medium concentration ratio (5:10) and the plant extract had effective antioxidant potentials of 77.2 ± 1.0% and 45.1 ± 0.5% free radical scavenging activity, respectively. The cytotoxic activity of TpAgNP6 in comparison to plant extract for the rhabdomyosarcoma cell line was significantly the lowest with IC50 values of 81.5 ± 1.9 and 90.59 ± 1.6 μg/ml and cell viability % of 24.3 ± 1.62 and 27.4 ± 1.05, respectively. The antibacterial and antifungal results of TpAgNPs revealed significant improvement in comparison to plant extract, i.e., minimum inhibition concentration (MIC) 64 μg/ml against Gram-negative Pseudomonas aeruginosa while, in the case of antifungal assay, TpAgNP6 was active against Candida parapsilosis. These TpAgNPs play a crucial role in determining the therapeutic potential of T. pallida due to their biological efficacy.


  • Open Access

    Promising Low-Cost Adsorbent from Waste Green Tea Leaves for Phenol Removal in Aqueous Solution

    by Asmat Ali, Maria Siddique, Wei Chen, Zhixin Han, Romana Khan, Muhammad Bilal, Ummara Waheed, Irum Shahzadi

    Phenol is the most common organic pollutant in many industrial wastewaters that may pose a health risk to humans due to its widespread application as industrial ingredients and additives. In this study, waste green tea leaves (WGTLs) were modified through chemical activation/carbonization and used as an adsorbent in the presence of ultrasound (cavitation) to eliminate phenol in the aqueous solution. Different treatments, such as cavitation, adsorption, and sono-adsorption were investigated to remove the phenol. The scanning electron microscope (SEM) morphology of the adsorbent revealed that the structure of WGTLs was porous before phenol was adsorbed. A Fourier Transform Infrared (FTIR) analysis showed an open chain of carboxylic acids after the sono-adsorption process. The results revealed that the sono-adsorption process is more efficient with enhanced removal percentages than individual processes. A maximum phenol removal of 92% was obtained using the sono-adsorption process under an optimal set of operating parameters, such as pH 3.5, 25 mg L−1 phenol concentration, 800 mg L−1 adsorbent dosage, 60 min time interval, 30 ± 2 °C temperature, and 80 W cavitation power. Removal of chemical oxygen demand (COD) and total organic carbon (TOC) reached 85% and 53%. The Freundlich isotherm model with a larger correlation coefficient (R2, 0.972) was better fitted for nonlinear regression than the Langmuir model, and the sono-adsorption process confirmed the pseudo-second-order reaction kinetics. The findings indicated that WGTLs in the presence of a cavitation effect prove to be a promising candidate for reducing phenol from the aqueous environment.


  • Open Access

    Ligustrum lucidum Leaf Extract-Assisted Green Synthesis of Silver Nanoparticles and Nano-Adsorbents Having Potential in Ultrasound-Assisted Adsorptive Removal of Methylene Blue Dye from Wastewater and Antimicrobial Activity

    by Mujaddad Sultan, Maria Siddique, Romana Khan, Ahmed M. Fallatah, Nighat Fatima, Irum Shahzadi, Ummara Waheed, Muhammad Bilal, Asmat Ali, Arshad Mehmood Abbasi

    Present study was conducted to investigate the adsorption and ultrasound-assisted adsorption potential of silver nanoparticles (AgNPs) and silver nanoparticles loaded on chitosan (AgCS composite) as nano-adsorbents for methylene blue (MB) removal. AgNPs were synthesized using leaf extract of Ligustrum lucidum, which were incorporated on the chitosan’s surface for modification. UV–Vis Spectroscopy, FTIR, XRD, SEM, and EDX techniques were used to confirm the synthesis and characterization of nanomaterials. Batch adsorption and sono-adsorption experiments for the removal of MB were executed under optimal conditions; for fitting the experimental equilibrium data, Langmuir and Freundlich’s isotherm models were adopted. In addition, the antimicrobial potential of the AgNPs and AgCS were examined against selected bacterial and fungal strains. UV–Vis spectroscopy confirmed AgNPs synthesis from the leaf extract of L. lucidum used as a reducer, which was spherical as exposed in the SEM analysis. The FTIR spectrum illustrated phytochemicals in the leaf extract of L. lucidum functioning as stabilizing agents around AgNPs and AgCS. Whereas, corresponding crystalline peaks of nanomaterial, including a signal peak at 3 keV indicating the presence of silver, were confirmed by XRD and EDX. The Langmuir model was chosen as an efficient model for adsorption and sono-adsorption, which exposed that under optimum conditions (pH = 6, dye initial concentration = 5 mg L−1, adsorbents dosage = 0.005 g, time = 120 min, US power 80 W), MB removal efficiency of AgNPs was >70%, using ultrasound-assisted adsorption compared to the non-sonicated adsorption. Furthermore, AgNPs exhibited promising antibacterial potential against Staphylococcus aureus with the maximum zone of inhibition (14.67 ± 0.47 mm). It was concluded that the green synthesis approach for the large-scale production of metallic nanoparticles is quite effective and can be recommended for efficient and cost-effective way to eradicate dyes, particularly from textile wastewater.