Fernanda Assunção Valim
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Fernanda Assunção Valim has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- White José dos Santos
Universidade Federal de Minas Gerais
5 shared publications - Francielly Las Casas de Assis2 shared publications
- Leonardo Martins e Silva
Universidade Tecnológica Federal do Paraná, Brasil
2 shared publications - Lucas Ribeiro dos Santos
Universidade Federal de Minas Gerais, Brasil
2 shared publications - Nelcí Helena Maia Gutierrez
Universidade Estadual de Maringá, Brasil
2 shared publications - Samuel Henrique Giarola de Oliveira2 shared publications
Latest Publications
- Open Access
- 11 August 2025
- Published by Associacao Nacional de Tecnologia do Ambiente Construido (ANTAC) in ENCONTRO NACIONAL DE APROVEITAMENTO DE RESÍDUOS NA CONSTRUÇÃO
- Vol. 9 (1) , 1-6
Influência do tipo de material e da aplicação da junta de assentamento na resistência à compressão de prismas com tijolos de solo cimento
As alvenarias com tijolos de solo cimento são uma alternativa interessante devido a reduzido impacto ambiental. Todavia o uso dos tijolos modulares encaixados e sem junta de assentamento geram baixa capacidade resistente nestes sistemas de paredes portantes. Assim, é necessário maior compreensão do efeito das juntas finas nestas alvenarias. O objetivo deste trabalho foi investigar influência do tipo de material e da aplicação da junta de assentamento na resistência à compressão de prismas com tijolos de solo cimento. Para isto, avaliou-se a resistências a compressão de prismas confeccionados com três juntas de materiais diferentes (argamassa polimérica, argamassa colante, e cola acrílica - Tijofix) e dois tipo de aplicação (contínua ou descontinua). Constatou-se que junta não uniforme reduz em mais de 50% a resistência à compressão e que a presença de junta com argamassa colante e/ou polimérica tende a maximizar a capacidade resistente das alvenarias com tijolo de solo cimento.
- 11 August 2025
- Published by Associacao Nacional de Tecnologia do Ambiente Construido (ANTAC) in ENCONTRO NACIONAL DE APROVEITAMENTO DE RESÍDUOS NA CONSTRUÇÃO
- Vol. 9 (1) , 1-6
Open AccessInfluência do tipo de material e da aplicação da junta de assentamento na resistência à compressão de prismas com tijolos de solo cimento
As alvenarias com tijolos de solo cimento são uma alternativa interessante devido a reduzido impacto ambiental. Todavia o uso dos tijolos modulares encaixados e sem junta de assentamento geram baixa capacidade resistente nestes sistemas de paredes portantes. Assim, é necessário maior compreensão do efeito das juntas finas nestas alvenarias. O objetivo deste trabalho foi investigar influência do tipo de material e da aplicação da junta de assentamento na resistência à compressão de prismas com tijolos de solo cimento. Para isto, avaliou-se a resistências a compressão de prismas confeccionados com três juntas de materiais diferentes (argamassa polimérica, argamassa colante, e cola acrílica - Tijofix) e dois tipo de aplicação (contínua ou descontinua). Constatou-se que junta não uniforme reduz em mais de 50% a resistência à compressão e que a presença de junta com argamassa colante e/ou polimérica tende a maximizar a capacidade resistente das alvenarias com tijolo de solo cimento.
- Open Access
- 1 January 2025
- Published by FapUNIFESP (SciELO) in Ambiente Construído
- Vol. 25, e138935
Mechanical behavior of masonry made with modular soil-cement-CDW bricks
The application of recycled sand from construction and demolition waste (CDW) in the soil-cement mixture for the manufacture of modular bricks for structural masonry was investigated, evaluating bricks and prisms. Firstly, the optimum moisture content was analyzed by analyzing the additions of CDW with 20%, 40%, 50% and 60%, by mass, in the soil mixture with 10% cement. The bricks were evaluated for their geometric characteristics, compressive strength, density and water absorption. The compressive strength of the bricks was analyzed at different ages (7, 14, 28, 56 and 530 days). The prisms (250.75mm x 126.41 mm x 137.16 mm), with a conventional 5 mm mortar joint, were evaluated for compressive strength, modulus of elasticity and failure mode, aged 530 days. The results demonstrated the feasibility of using CDW, which increases the compressive strength of the bricks, but makes molding difficult, as it reduces initial cohesion. The efficiency factor of the prisms was 57%. The failure mode observed was tension in the bricks and subsequent propagation of cracks in the joints - behavior similar to materials with brittle rupture. Brazilian standards approached the mechanical behavior of the material.
- 1 January 2025
- Published by FapUNIFESP (SciELO) in Ambiente Construído
- Vol. 25, e138935
Open AccessMechanical behavior of masonry made with modular soil-cement-CDW bricks
The application of recycled sand from construction and demolition waste (CDW) in the soil-cement mixture for the manufacture of modular bricks for structural masonry was investigated, evaluating bricks and prisms. Firstly, the optimum moisture content was analyzed by analyzing the additions of CDW with 20%, 40%, 50% and 60%, by mass, in the soil mixture with 10% cement. The bricks were evaluated for their geometric characteristics, compressive strength, density and water absorption. The compressive strength of the bricks was analyzed at different ages (7, 14, 28, 56 and 530 days). The prisms (250.75mm x 126.41 mm x 137.16 mm), with a conventional 5 mm mortar joint, were evaluated for compressive strength, modulus of elasticity and failure mode, aged 530 days. The results demonstrated the feasibility of using CDW, which increases the compressive strength of the bricks, but makes molding difficult, as it reduces initial cohesion. The efficiency factor of the prisms was 57%. The failure mode observed was tension in the bricks and subsequent propagation of cracks in the joints - behavior similar to materials with brittle rupture. Brazilian standards approached the mechanical behavior of the material.
- Open Access
- 15 April 2024
- Published by RGSA- Revista de Gestao Social e Ambiental in Revista de Gestão Social e Ambiental
- Vol. 18 (8) , e08417
Influence of The Type of Laying Joint on The Mechanical Behavior of Prisms Made With Ecological Bricks
Objective: This paper proposes the study of the influence of laying joints on the mechanical behavior of masonry prisms made with ecological bricks. Method: To this end, an experimental program was developed including prisms constructed with different types of joints: laying mortar, adhesive mortar and PVA glue (polyvinyl acetate). Results and Discussion: The adhesive mortar and the conventional mortar were characterized in terms of their compressive strength, obtaining a resistance approximately 1.36 times the compressive strength of the brick (6.92±0.51 MPa), while the settlement was close (0.99%). The average compressive strengths of the prisms were very different, demonstrating that the laying joint has a significant influence on cement-based masonry. It was found that the use of adhesive mortar made it possible to increase the resistance capacity of the prisms to compression by 75%, when compared to prisms made with joints that used PVA glue. However, the laying mortar showed a similar result, at 53%. The rupture mode observed in the prisms made with sticky and conventional mortar was due to traction cracking in the brick units. Research Implications: In this study, it can be concluded that when using ecological bricks with different types of joints, the thickness and type of mortar can have a significant influence on the final strength of the materials, however thin joints tend to maximize the effects defects and reduce the resistant capacity of these masonries.
- 15 April 2024
- Published by RGSA- Revista de Gestao Social e Ambiental in Revista de Gestão Social e Ambiental
- Vol. 18 (8) , e08417
Open AccessInfluence of The Type of Laying Joint on The Mechanical Behavior of Prisms Made With Ecological Bricks
Objective: This paper proposes the study of the influence of laying joints on the mechanical behavior of masonry prisms made with ecological bricks. Method: To this end, an experimental program was developed including prisms constructed with different types of joints: laying mortar, adhesive mortar and PVA glue (polyvinyl acetate). Results and Discussion: The adhesive mortar and the conventional mortar were characterized in terms of their compressive strength, obtaining a resistance approximately 1.36 times the compressive strength of the brick (6.92±0.51 MPa), while the settlement was close (0.99%). The average compressive strengths of the prisms were very different, demonstrating that the laying joint has a significant influence on cement-based masonry. It was found that the use of adhesive mortar made it possible to increase the resistance capacity of the prisms to compression by 75%, when compared to prisms made with joints that used PVA glue. However, the laying mortar showed a similar result, at 53%. The rupture mode observed in the prisms made with sticky and conventional mortar was due to traction cracking in the brick units. Research Implications: In this study, it can be concluded that when using ecological bricks with different types of joints, the thickness and type of mortar can have a significant influence on the final strength of the materials, however thin joints tend to maximize the effects defects and reduce the resistant capacity of these masonries.
- Open Access
- 4 April 2024
- Published by RGSA- Revista de Gestao Social e Ambiental in Revista de Gestão Social e Ambiental
- Vol. 18 (7) , e06143
Hyponymy From a Semiotic Point of View
Purpose: In this article, by considering the linguistic symbols, the author shows that the recognition of this relation depends on the encyclopedic knowledge of sign users. Theoretical Framework: From the hyponymic point of view, this article concerns signs whose referents are in another possible relations can be expanded to different types of sign. Result and Discussion: The writer used two kinds of signs for showing the truth-value of the assumption. First, signs which are compound and are the result of a selection and combination of different referents. Second, the signs which, by changing the Context B, change their identity and interpretation. Value/Originality: Hyponymy is one of the most well-known lexical relations in lexical semantics world. Accordingly, the aim of this article is to demonstrate how hyponymic lexical and it is possible to generalize this relation to other types of signs in semiotics.
- 4 April 2024
- Published by RGSA- Revista de Gestao Social e Ambiental in Revista de Gestão Social e Ambiental
- Vol. 18 (7) , e06143
Open AccessHyponymy From a Semiotic Point of View
Purpose: In this article, by considering the linguistic symbols, the author shows that the recognition of this relation depends on the encyclopedic knowledge of sign users. Theoretical Framework: From the hyponymic point of view, this article concerns signs whose referents are in another possible relations can be expanded to different types of sign. Result and Discussion: The writer used two kinds of signs for showing the truth-value of the assumption. First, signs which are compound and are the result of a selection and combination of different referents. Second, the signs which, by changing the Context B, change their identity and interpretation. Value/Originality: Hyponymy is one of the most well-known lexical relations in lexical semantics world. Accordingly, the aim of this article is to demonstrate how hyponymic lexical and it is possible to generalize this relation to other types of signs in semiotics.
- Open Access
- 25 October 2023
- Published by Associacao Nacional de Tecnologia do Ambiente Construido (ANTAC) in ENCONTRO NACIONAL DE APROVEITAMENTO DE RESÍDUOS NA CONSTRUÇÃO
- Vol. 8, 1-8
Análise do comportamento de prismas de alvenaria confeccionados com tijolos modulares de solo-cimento-RCD
Nesta pesquisa investigou-se a resistência à compressão e o módulo de elasticidade de prismas confeccionados com tijolos vazados de solo-cimento-RCD (50%-10%-50%, em massa), com idade avançada (530 dias), unidos por uma junta de argamassa de assentamento convencional de 5 mm. Realizou-se a caracterização do solo e da mistura do Solo-Cimento-RCD. Avaliou-se a resistência à compressão, módulo de elasticidade e o modo de falha dos prismas. O fator de eficiência dos prismas foi de 57%, valor esperado e condizente com outros autores. O modo de falha observado foi de tração nos tijolos e posterior propagação de trincas nas juntas, apresentando comportamento similar a materiais de ruptura frágil. As equações propostas pela normalização brasileira para tijolos de concreto foram as que obtiveram maior proximidade com os valores encontrados nessa pesquisa. Ressalta-se, contudo, que o comportamento mecânico desse tipo de alvenaria precisa, ainda, ser melhor estudado.
- 25 October 2023
- Published by Associacao Nacional de Tecnologia do Ambiente Construido (ANTAC) in ENCONTRO NACIONAL DE APROVEITAMENTO DE RESÍDUOS NA CONSTRUÇÃO
- Vol. 8, 1-8
Open AccessAnálise do comportamento de prismas de alvenaria confeccionados com tijolos modulares de solo-cimento-RCD
Nesta pesquisa investigou-se a resistência à compressão e o módulo de elasticidade de prismas confeccionados com tijolos vazados de solo-cimento-RCD (50%-10%-50%, em massa), com idade avançada (530 dias), unidos por uma junta de argamassa de assentamento convencional de 5 mm. Realizou-se a caracterização do solo e da mistura do Solo-Cimento-RCD. Avaliou-se a resistência à compressão, módulo de elasticidade e o modo de falha dos prismas. O fator de eficiência dos prismas foi de 57%, valor esperado e condizente com outros autores. O modo de falha observado foi de tração nos tijolos e posterior propagação de trincas nas juntas, apresentando comportamento similar a materiais de ruptura frágil. As equações propostas pela normalização brasileira para tijolos de concreto foram as que obtiveram maior proximidade com os valores encontrados nessa pesquisa. Ressalta-se, contudo, que o comportamento mecânico desse tipo de alvenaria precisa, ainda, ser melhor estudado.
- Open Access
- 27 June 2019
- Published by Universidade Federal de Santa Maria in Revista Eletrônica em Gestão, Educação e Tecnologia Ambiental
- Vol. 23, 4
Diagnosis and proposal of erosion control downstream of the Park Alfredo Werner Nyffeler, in Maringá - Paraná
The surface runoff role in the urban erosion in Northwest Paraná cities was strengthened by many factors, such as the establishment of the cities often in disaggregated soil areas, vegetation cover removal, soil surface impermeabilization caused by construction and poorly executed embankment areas. In Maringá, Paraná, in a bottom valley located near the park Alfredo Werner Nyffeler, there is an accelerated erosive process, damaging half of the urban drainage pipes, which are located around one meter far from the sidewalk. In that way, it poses a risk to the local population and may lead to a collapse of the drainage structure. Within this context, this work aims to diagnose and identify the possible aspects that caused these issues and to design a gabion wall to stem the significative erosive process occurring in the area. Thus, on-site data survey and laboratory analysis were carried out in order to characterize the soil and, by means of the software GawacWin, a gabion retaining wall in order to use it as a prompt, needed retaining measure was designed. The obtained results showed a lack of awareness by the local population in regard to the solid waste deposition, which accumulates downstream of the park. In addition, the drainage pipes could not cope with the peak flows, causing structural damage, leaks and uncovering the junction box. A silty clay embankment was found in the area, which is an expansive soil, contaminated with rubble and the soil compaction was not properly executed. It was used to level the area for the pipeline passage, contributing to the erosion. A gabion wall, with 6m high and 3m base, showed to be an efficient solution with regard to terrain loads. Furthermore, the price, simple construction and the easy merging with the environment are advantages for the gabion wall, when compared to other structural measures.
- 27 June 2019
- Published by Universidade Federal de Santa Maria in Revista Eletrônica em Gestão, Educação e Tecnologia Ambiental
- Vol. 23, 4
Open AccessDiagnosis and proposal of erosion control downstream of the Park Alfredo Werner Nyffeler, in Maringá - Paraná
The surface runoff role in the urban erosion in Northwest Paraná cities was strengthened by many factors, such as the establishment of the cities often in disaggregated soil areas, vegetation cover removal, soil surface impermeabilization caused by construction and poorly executed embankment areas. In Maringá, Paraná, in a bottom valley located near the park Alfredo Werner Nyffeler, there is an accelerated erosive process, damaging half of the urban drainage pipes, which are located around one meter far from the sidewalk. In that way, it poses a risk to the local population and may lead to a collapse of the drainage structure. Within this context, this work aims to diagnose and identify the possible aspects that caused these issues and to design a gabion wall to stem the significative erosive process occurring in the area. Thus, on-site data survey and laboratory analysis were carried out in order to characterize the soil and, by means of the software GawacWin, a gabion retaining wall in order to use it as a prompt, needed retaining measure was designed. The obtained results showed a lack of awareness by the local population in regard to the solid waste deposition, which accumulates downstream of the park. In addition, the drainage pipes could not cope with the peak flows, causing structural damage, leaks and uncovering the junction box. A silty clay embankment was found in the area, which is an expansive soil, contaminated with rubble and the soil compaction was not properly executed. It was used to level the area for the pipeline passage, contributing to the erosion. A gabion wall, with 6m high and 3m base, showed to be an efficient solution with regard to terrain loads. Furthermore, the price, simple construction and the easy merging with the environment are advantages for the gabion wall, when compared to other structural measures.