Regiane Dalazoana
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Regiane Dalazoana has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Tulio Alves Santana
Instituto Federal do Mato Grosso, Departamento de Infraestrutura, Cuiabá/MT, Brasil
5 shared publications - Samoel Giehl
Universidade Federal do Paraná
4 shared publications - Sílvio Rogério Correia de Freitas
Universidade Federal do Paraná
4 shared publications - Eurico Nicacio
Universidade Federal do Paraná, Curitiba, Paraná
3 shared publications - Salomão Soares
Federal University of Parana
3 shared publications - Sérgio da Conceição Alves
Universidade Federal do Paraná
3 shared publications
Latest Publications
- Open Access
- 9 September 2026
- Published by Portal de Periódicos UFU - Universidade Federal de Uberlandia in Revista Brasileira de Cartografia
- Vol. 78
Automation of the Van de Casteele Test via Deep Learning: Feasibility and Analysis of Instantaneous Sampling
The Van de Casteele Test is an important step in analyzing the quality of observations from tide gauge stations, but its manual execution is laborious. To automate this process, this research evaluated the use of a deep learning model based on YOLO, applied to images of the tide staff at the Arraial do Cabo tide gauge station, captured by low-cost digital cameras. The study also analyzed the limits of instantaneous inference, characterized by direct image measurement without the common time-averaging filters found in electronic sensors. In tide staff detection, the model showed excellent performance across various scenarios, with mAP50 of 0.995 and mAP50-95 ranging from 0.844 to 0.913. The metrological validation compared five experiments, using the conventional method as a reference. Regarding accuracy, while the Radar and Encoder sensors showed standard deviations (SD) of 0.02 m when compared to tide staff readings taken by an observer, the computer vision model converged to a SD of 0.03 m throughout the experiments. This slightly higher variability, together with an identified systematic bias, is attributed to the instantaneous capture of the sea surface, which records high-frequency noise (waves) that is filtered out by the temporal integration of level sensors and by the observer. Therefore, the results demonstrate that, given the instantaneous nature of image capture, the technique is robust and feasible for automating the Van de Casteele Test.
- 9 September 2026
- Published by Portal de Periódicos UFU - Universidade Federal de Uberlandia in Revista Brasileira de Cartografia
- Vol. 78
Open AccessAutomation of the Van de Casteele Test via Deep Learning: Feasibility and Analysis of Instantaneous Sampling
The Van de Casteele Test is an important step in analyzing the quality of observations from tide gauge stations, but its manual execution is laborious. To automate this process, this research evaluated the use of a deep learning model based on YOLO, applied to images of the tide staff at the Arraial do Cabo tide gauge station, captured by low-cost digital cameras. The study also analyzed the limits of instantaneous inference, characterized by direct image measurement without the common time-averaging filters found in electronic sensors. In tide staff detection, the model showed excellent performance across various scenarios, with mAP50 of 0.995 and mAP50-95 ranging from 0.844 to 0.913. The metrological validation compared five experiments, using the conventional method as a reference. Regarding accuracy, while the Radar and Encoder sensors showed standard deviations (SD) of 0.02 m when compared to tide staff readings taken by an observer, the computer vision model converged to a SD of 0.03 m throughout the experiments. This slightly higher variability, together with an identified systematic bias, is attributed to the instantaneous capture of the sea surface, which records high-frequency noise (waves) that is filtered out by the temporal integration of level sensors and by the observer. Therefore, the results demonstrate that, given the instantaneous nature of image capture, the technique is robust and feasible for automating the Van de Casteele Test.
- Open Access
- 26 June 2026
- Published by Portal de Periódicos UFU - Universidade Federal de Uberlandia in Revista Brasileira de Cartografia
- Vol. 78
Unification of Vertical References in the Coastal Zone: A Comprehensive Review for Blue Amazon Management
This review article discusses the strategic challenge of unifying topographic and bathymetric data into a continuous model, an essential condition for managing the 5.7 million km² of the Blue Amazon and for the development of the Brazilian coastal zone. The complexity of this integration lies in the dynamic nature of multiple vertical datums that vary over time and space. It is demonstrated that the traditional connection via tide gauges or the determination of Separation Models (SEP) presents limitations at the national scale. Furthermore, conventional satellite altimetry technologies and geoid modeling reveal a significant coastal observational gap at the ocean-continent interface. Therefore, the Sea Surface Topography is fundamental for the unification of vertical references in the coastal zone; however, its rigorous determination still faces inseparable barriers in both technical-scientific and operational spheres. International experiences highlight the need for a transition to interdisciplinary approaches. It is concluded that overcoming the coastal observational gap in Brazil requires abandoning deterministic interpolations in favor of stochastic techniques, coupled with high-resolution hydrodynamic and geoidal models, aligning the country with the guidelines of the International Height Reference System (IHRS) to ensure efficient and sovereign management of its coastal and maritime territory.
- 26 June 2026
- Published by Portal de Periódicos UFU - Universidade Federal de Uberlandia in Revista Brasileira de Cartografia
- Vol. 78
Open AccessUnification of Vertical References in the Coastal Zone: A Comprehensive Review for Blue Amazon Management
This review article discusses the strategic challenge of unifying topographic and bathymetric data into a continuous model, an essential condition for managing the 5.7 million km² of the Blue Amazon and for the development of the Brazilian coastal zone. The complexity of this integration lies in the dynamic nature of multiple vertical datums that vary over time and space. It is demonstrated that the traditional connection via tide gauges or the determination of Separation Models (SEP) presents limitations at the national scale. Furthermore, conventional satellite altimetry technologies and geoid modeling reveal a significant coastal observational gap at the ocean-continent interface. Therefore, the Sea Surface Topography is fundamental for the unification of vertical references in the coastal zone; however, its rigorous determination still faces inseparable barriers in both technical-scientific and operational spheres. International experiences highlight the need for a transition to interdisciplinary approaches. It is concluded that overcoming the coastal observational gap in Brazil requires abandoning deterministic interpolations in favor of stochastic techniques, coupled with high-resolution hydrodynamic and geoidal models, aligning the country with the guidelines of the International Height Reference System (IHRS) to ensure efficient and sovereign management of its coastal and maritime territory.
- Open Access
- 14 May 2026
- Published by Portal de Periódicos UFU - Universidade Federal de Uberlandia in Revista Brasileira de Cartografia
- Vol. 78
Evaluation of the Consistency between In Situ and Satellite Data for Sea Surface Monitoring at Continuous Tide Gauge Stations
Satellite altimetry has revolutionized the monitoring of sea surface height (SSH) variations, enabling analyses of ocean dynamics and mean dynamic topography (MDT) at global and regional scales. This study investigates SSH variations using data from the CryoSat-2 (CS2), Sentinel-6A (S6A), and Surface Water and Ocean Topography (SWOT) missions over a time series of approximately 10 years (2014–2024), comparing them with tide gauge observations from the Permanent Tide Gauge Network for Geodesy at the EMFOR (Fortaleza), EMSAL (Salvador), EMMAC (Macaé), and EMIMB (Imbituba) stations. An absolute approach with spatial extrapolation was employed to harmonize in situ and satellite data. The results show good agreement between altimetric and tide gauge measurements, with residuals consistent with instrumental uncertainties (on the order of centimeters). The Salvador tide gauge station exhibited the smallest residuals (0.01±0.04 m), highlighting the high precision of the SWOT mission, which showed the best agreement with tide gauge data. Estimates of MDT also showed dispersions of only a few centimeters, confirming the high sensitivity and effectiveness of altimetric missions in monitoring local ocean dynamics.
- 14 May 2026
- Published by Portal de Periódicos UFU - Universidade Federal de Uberlandia in Revista Brasileira de Cartografia
- Vol. 78
Open AccessEvaluation of the Consistency between In Situ and Satellite Data for Sea Surface Monitoring at Continuous Tide Gauge Stations
Satellite altimetry has revolutionized the monitoring of sea surface height (SSH) variations, enabling analyses of ocean dynamics and mean dynamic topography (MDT) at global and regional scales. This study investigates SSH variations using data from the CryoSat-2 (CS2), Sentinel-6A (S6A), and Surface Water and Ocean Topography (SWOT) missions over a time series of approximately 10 years (2014–2024), comparing them with tide gauge observations from the Permanent Tide Gauge Network for Geodesy at the EMFOR (Fortaleza), EMSAL (Salvador), EMMAC (Macaé), and EMIMB (Imbituba) stations. An absolute approach with spatial extrapolation was employed to harmonize in situ and satellite data. The results show good agreement between altimetric and tide gauge measurements, with residuals consistent with instrumental uncertainties (on the order of centimeters). The Salvador tide gauge station exhibited the smallest residuals (0.01±0.04 m), highlighting the high precision of the SWOT mission, which showed the best agreement with tide gauge data. Estimates of MDT also showed dispersions of only a few centimeters, confirming the high sensitivity and effectiveness of altimetric missions in monitoring local ocean dynamics.
- Open Access
- 17 April 2026
- Published by Portal de Periódicos UFU - Universidade Federal de Uberlandia in Revista Brasileira de Cartografia
- Vol. 78
Analysis of Tide Gauge Data at Baía de Paranaguá, PR
This study analyzes tide gauge data from Paranaguá Bay, in Paraná, Brazil, aiming at characterizing tidal patterns using time series analysis. The methodology comprised the development and application of quality control procedures aiming at identifying and removing spurious data. These procedures resulted in a 9.86% reduction in the variance of harmonic constituents, enabling a substantially larger number of constituents to be resolved across several time series. Harmonic analysis was performed using the AstGeoTop and PACMARÉ software packages. Predominantly semidiurnal tidal behavior was identified at stations located in the middle and inner portions of the bay, whereas a semidiurnal regime with pronounced inequalities prevailed near the bay entrance. Based on the Reduction in Variance (RV) index, harmonic reconstruction accounted, on average, for 82% of observed sea level variability, indicating an approximate 18% contribution from meteorological forcing within the study area. The application of Thompson’s low-pass filter allowed the seasonal structure of tidal residuals to be delineated, revealing positive sea level anomalies during the first half of the year and negative anomalies during the second half. Although the available time series are not sufficiently long to support robust long-term assessments, the results underscore the importance of maintaining continuous tide gauge records for coastal research. Furthermore, the lack of complementary meteorological data constrained a fully integrated analysis of atmospheric forcing and its influence on regional sea level variability.
- 17 April 2026
- Published by Portal de Periódicos UFU - Universidade Federal de Uberlandia in Revista Brasileira de Cartografia
- Vol. 78
Open AccessAnalysis of Tide Gauge Data at Baía de Paranaguá, PR
This study analyzes tide gauge data from Paranaguá Bay, in Paraná, Brazil, aiming at characterizing tidal patterns using time series analysis. The methodology comprised the development and application of quality control procedures aiming at identifying and removing spurious data. These procedures resulted in a 9.86% reduction in the variance of harmonic constituents, enabling a substantially larger number of constituents to be resolved across several time series. Harmonic analysis was performed using the AstGeoTop and PACMARÉ software packages. Predominantly semidiurnal tidal behavior was identified at stations located in the middle and inner portions of the bay, whereas a semidiurnal regime with pronounced inequalities prevailed near the bay entrance. Based on the Reduction in Variance (RV) index, harmonic reconstruction accounted, on average, for 82% of observed sea level variability, indicating an approximate 18% contribution from meteorological forcing within the study area. The application of Thompson’s low-pass filter allowed the seasonal structure of tidal residuals to be delineated, revealing positive sea level anomalies during the first half of the year and negative anomalies during the second half. Although the available time series are not sufficiently long to support robust long-term assessments, the results underscore the importance of maintaining continuous tide gauge records for coastal research. Furthermore, the lack of complementary meteorological data constrained a fully integrated analysis of atmospheric forcing and its influence on regional sea level variability.
- Open Access
- 1 July 2025
- Published by Universidade Federal do Rio Grande do Norte - UFRN in Revista de Geociências do Nordeste
- Vol. 11 (2) , 225-240
Uma abordagem baseada em lógica fuzzy para o diagnóstico e planejamento da rede de nivelamento do Sistema Geodésico Brasileiro
A rede de nivelamento é um conjunto de marcos geodésicos denominados referências de nível (RRNN), que materializam a componente vertical de um sistema geodésico, sendo essencial para o planejamento e execução de obras de engenharia. Sua manutenção e densificação demanda um planejamento detalhado para empenho adequado de recursos. Nesse sentido, para otimizar o diagnóstico e o planejamento de campanhas geodésicas, auxiliando a tomada de decisão diante de limitações orçamentárias e operacionais, foi proposta uma metodologia baseada em lógica fuzzy, que lida com incertezas e subjetividades do processo decisório. O processo fuzzy pelo método Mamdani envolveu a fuzzificação, inferência e defuzzificação, resultando em uma priorização hierárquica de atividades de campo em alta, média e baixa. Como destaque dos resultados, identificou-se que RRNN destruídas somam 9.155 e as não encontradas, 26.322, o que correspondem a 49.6% da rede de nivelamento. Esse diagnóstico pode ser pior, já que das 22.524 RRNN com o status bom no banco de dados geodésicos e classificadas como prioridade alta de verificação da realidade física, 19.388 não são visitadas há mais de 20 anos. A abordagem proporcionou uma visão sistêmica que subsidiará o planejamento e a otimização de recursos, fortalecendo à tomada de decisão estratégica.
- 1 July 2025
- Published by Universidade Federal do Rio Grande do Norte - UFRN in Revista de Geociências do Nordeste
- Vol. 11 (2) , 225-240
Open AccessUma abordagem baseada em lógica fuzzy para o diagnóstico e planejamento da rede de nivelamento do Sistema Geodésico Brasileiro
A rede de nivelamento é um conjunto de marcos geodésicos denominados referências de nível (RRNN), que materializam a componente vertical de um sistema geodésico, sendo essencial para o planejamento e execução de obras de engenharia. Sua manutenção e densificação demanda um planejamento detalhado para empenho adequado de recursos. Nesse sentido, para otimizar o diagnóstico e o planejamento de campanhas geodésicas, auxiliando a tomada de decisão diante de limitações orçamentárias e operacionais, foi proposta uma metodologia baseada em lógica fuzzy, que lida com incertezas e subjetividades do processo decisório. O processo fuzzy pelo método Mamdani envolveu a fuzzificação, inferência e defuzzificação, resultando em uma priorização hierárquica de atividades de campo em alta, média e baixa. Como destaque dos resultados, identificou-se que RRNN destruídas somam 9.155 e as não encontradas, 26.322, o que correspondem a 49.6% da rede de nivelamento. Esse diagnóstico pode ser pior, já que das 22.524 RRNN com o status bom no banco de dados geodésicos e classificadas como prioridade alta de verificação da realidade física, 19.388 não são visitadas há mais de 20 anos. A abordagem proporcionou uma visão sistêmica que subsidiará o planejamento e a otimização de recursos, fortalecendo à tomada de decisão estratégica.
- Open Access
- 6 January 2025
- Published by Universidade Federal do Rio Grande do Norte - UFRN in Revista de Geociências do Nordeste
- Vol. 11 (1) , 922-935
Estimativas da Topografia do Nível Médio do Mar na costa brasileira por meio da Altimetria por Satélites
O presente estudo tem como objetivo a obtenção de valores de Topografia do Nível Médio do Mar (TNMM) gerados a partir de produtos de altimetria por satélites, por meio das missões Sentinel-6A, CryoSat-2 e dados globais oceânicos de Altitudes da Superfície do Mar e variáveis derivadas, do inglês, Global Ocean Gridded L4 Sea Surface Heights and Derived Variables, gerados a partir de uma solução multimissões. As variações da TNMM foram estimadas para quatro estações maregráficas pertencentes à Rede Maregráfica Permanente para Geodésia (RMPG), mantida pelo Instituto Brasileiro de Geografia e Estatística (IBGE). Estas estações estão localizadas ao longo da costa brasileira em Fortaleza-CE, Salvador-BA, Macaé-RJ e Imbituba-SC. Foi utilizado o software BRAT versão 4.2.1 para extrair os parâmetros geofísicos de anomalia do nível do mar e topografia dinâmica absoluta, e a partir desses, estimou-se a TNMM e suas variações temporais para as quatro estações maregráficas. Esses resultados foram comparados entre si por meio do cálculo das discrepâncias e com base em critérios da estatística descritiva. Os resultados demonstram o elevado potencial da missão altimétrica Sentinel-6A, uma vez que, as discrepâncias obtidas entre as missões Sentinel-6A e a CryoSat-2, foram menores ao serem comparados com a missão CryoSat-2 a solução multimissões. Palavras-chave: Radar de Abertura Sintética, Altimetria por Satélites, Missões Altimétricas.
- 6 January 2025
- Published by Universidade Federal do Rio Grande do Norte - UFRN in Revista de Geociências do Nordeste
- Vol. 11 (1) , 922-935
Open AccessEstimativas da Topografia do Nível Médio do Mar na costa brasileira por meio da Altimetria por Satélites
O presente estudo tem como objetivo a obtenção de valores de Topografia do Nível Médio do Mar (TNMM) gerados a partir de produtos de altimetria por satélites, por meio das missões Sentinel-6A, CryoSat-2 e dados globais oceânicos de Altitudes da Superfície do Mar e variáveis derivadas, do inglês, Global Ocean Gridded L4 Sea Surface Heights and Derived Variables, gerados a partir de uma solução multimissões. As variações da TNMM foram estimadas para quatro estações maregráficas pertencentes à Rede Maregráfica Permanente para Geodésia (RMPG), mantida pelo Instituto Brasileiro de Geografia e Estatística (IBGE). Estas estações estão localizadas ao longo da costa brasileira em Fortaleza-CE, Salvador-BA, Macaé-RJ e Imbituba-SC. Foi utilizado o software BRAT versão 4.2.1 para extrair os parâmetros geofísicos de anomalia do nível do mar e topografia dinâmica absoluta, e a partir desses, estimou-se a TNMM e suas variações temporais para as quatro estações maregráficas. Esses resultados foram comparados entre si por meio do cálculo das discrepâncias e com base em critérios da estatística descritiva. Os resultados demonstram o elevado potencial da missão altimétrica Sentinel-6A, uma vez que, as discrepâncias obtidas entre as missões Sentinel-6A e a CryoSat-2, foram menores ao serem comparados com a missão CryoSat-2 a solução multimissões. Palavras-chave: Radar de Abertura Sintética, Altimetria por Satélites, Missões Altimétricas.
- Open Access
- 25 December 2023
- Published by Portal de Periódicos UFU - Universidade Federal de Uberlandia in Revista Brasileira de Cartografia
- Vol. 75
Emprego da Técnica PSInSAR como Ferramenta Complementar em Análise de Subsidências. Caso de Estudo: Bairro Guabirotuba – Curitiba – PR
To understand the magnitude and danger of deforming agents, such as the subsidence process, it is essential to identify and monitor them adequately. The GNSS is widely used to assess the overall panorama of these instabilities, whether through absolute positions or continuous measurements of points within the affected areas. Interferometric technique in a multi-temporal approach (MT-InSAR), such as PSInSAR, allows monitoring and detection of small variations on the ground caused by surface movements, such as landslides or subsidence. In this sense, the present manuscript sought to complement the results of a subsidence analysis using GPS observations carried out in a region of Guabirotuba, a neighborhood in the city of Curitiba - PR. This complementation was made through the PSInSAR processing of 77 descending SAR images from the Sentinel-1A satellite, acquired from 2016 to 2022. For comparison purposes, the velocities and displacements obtained with GPS were projected in the direction of the line of sight of the satellite of the master image used in the PSInSAR technique processing. As a result, it was observed that the GPS network stations implanted in Guabirotuba presented an extremely slow velocity when projected on the line-of-sight (LoS) of the satellite. The projection in LoS of the relative displacements of the coordinates (north, east, up) and velocities showed similar and divergent behaviors at some points when compared to the results obtained with the PSInSAR technique.
- 25 December 2023
- Published by Portal de Periódicos UFU - Universidade Federal de Uberlandia in Revista Brasileira de Cartografia
- Vol. 75
Open AccessEmprego da Técnica PSInSAR como Ferramenta Complementar em Análise de Subsidências. Caso de Estudo: Bairro Guabirotuba – Curitiba – PR
To understand the magnitude and danger of deforming agents, such as the subsidence process, it is essential to identify and monitor them adequately. The GNSS is widely used to assess the overall panorama of these instabilities, whether through absolute positions or continuous measurements of points within the affected areas. Interferometric technique in a multi-temporal approach (MT-InSAR), such as PSInSAR, allows monitoring and detection of small variations on the ground caused by surface movements, such as landslides or subsidence. In this sense, the present manuscript sought to complement the results of a subsidence analysis using GPS observations carried out in a region of Guabirotuba, a neighborhood in the city of Curitiba - PR. This complementation was made through the PSInSAR processing of 77 descending SAR images from the Sentinel-1A satellite, acquired from 2016 to 2022. For comparison purposes, the velocities and displacements obtained with GPS were projected in the direction of the line of sight of the satellite of the master image used in the PSInSAR technique processing. As a result, it was observed that the GPS network stations implanted in Guabirotuba presented an extremely slow velocity when projected on the line-of-sight (LoS) of the satellite. The projection in LoS of the relative displacements of the coordinates (north, east, up) and velocities showed similar and divergent behaviors at some points when compared to the results obtained with the PSInSAR technique.
- Open Access
- 16 August 2023
- Published by Universidade Federal do Rio de Janeiro in Anuário do Instituto de Geociências
- Vol. 46
Employment of Free Packages for MT-InSAR Approaches to Verify the Subsidence Event over Maceió City, Brazil
Persistent Scatterer Interferometric Synthetic Aperture Radar (PSInSAR) technique employs a Multi-Temporal InSAR (MT-InSAR) approach to accurately measure subsidence. This technique, a type of Differential Interferometry (DInSAR), mitigates errors that traditional DInSAR techniques cannot, including temporal and geometric decorrelation, and phase unwrapping errors. In order to verify the subsidence process in the Pinheiro neighborhood of Maceio - Brazil following a 2018 earthquake, we tested free processing packages such as SNAP-StaMPS integration. Our investigation was conducted in two stages: first, using a stack of Sentinel-1A SLCSAR (Single Look Complex-SAR) images acquired before and after the earthquake, and second, using more recent images to determine if the subsidence process is ongoing. Results from the first stage identified the area affected by subsidence and the second stage confirmed the continued presence of subsidence events. From 2017 to 2018, the subsidence process exhibited the highest displacement amplitude of -32.3 mm/year, whereas, between 2021 and 2022, the amplitude decreased to -24.09 mm/year, indicating a deceleration in the subsidence process.
- 16 August 2023
- Published by Universidade Federal do Rio de Janeiro in Anuário do Instituto de Geociências
- Vol. 46
Open AccessEmployment of Free Packages for MT-InSAR Approaches to Verify the Subsidence Event over Maceió City, Brazil
Persistent Scatterer Interferometric Synthetic Aperture Radar (PSInSAR) technique employs a Multi-Temporal InSAR (MT-InSAR) approach to accurately measure subsidence. This technique, a type of Differential Interferometry (DInSAR), mitigates errors that traditional DInSAR techniques cannot, including temporal and geometric decorrelation, and phase unwrapping errors. In order to verify the subsidence process in the Pinheiro neighborhood of Maceio - Brazil following a 2018 earthquake, we tested free processing packages such as SNAP-StaMPS integration. Our investigation was conducted in two stages: first, using a stack of Sentinel-1A SLCSAR (Single Look Complex-SAR) images acquired before and after the earthquake, and second, using more recent images to determine if the subsidence process is ongoing. Results from the first stage identified the area affected by subsidence and the second stage confirmed the continued presence of subsidence events. From 2017 to 2018, the subsidence process exhibited the highest displacement amplitude of -32.3 mm/year, whereas, between 2021 and 2022, the amplitude decreased to -24.09 mm/year, indicating a deceleration in the subsidence process.
- Open Access
- 14 March 2023
- Published by Portal de Periódicos UFU - Universidade Federal de Uberlandia in Revista Brasileira de Cartografia
- Vol. 75, 1-24
Técnica PSInSAR na Avaliação de Deslocamentos: Análise Conceitual, Aplicações e Perspectivas
Persistent Scatterer Interferometric Synthetic Aperture Radar (PSInSAR™) is a remote sensing technique based on Differential InSAR (DInSAR) approaches. PSInSAR™ makes it possible to identify pixels that present stabilized phase related to the dispersion index. These pixels contain dispersed permanent features as man-made structures which includes bridges, dams, the building roofs, buildings, houses, and some natural features such as rocks and quarries. Thus, by analyzing the phase of these pixels, PSInSAR™ can overcome some difficulties found in the DInSAR technique such as problems related to atmospheric, temporal, and spatial decorrelations. Since its inception in the early 2000s and due to its ability to map surface deformation with millimeter precision, PSInSAR™ has been widely used to recognize deformation in risk areas such as sink/uplift and landslides. Thus, this article sought to describe the basic principle of the PSInSAR™ technique, focusing on how it has been used in the national and international context. In addition, we also show some commercial and open-source packages for PSInSAR™ processing.
- 14 March 2023
- Published by Portal de Periódicos UFU - Universidade Federal de Uberlandia in Revista Brasileira de Cartografia
- Vol. 75, 1-24
Open AccessTécnica PSInSAR na Avaliação de Deslocamentos: Análise Conceitual, Aplicações e Perspectivas
Persistent Scatterer Interferometric Synthetic Aperture Radar (PSInSAR™) is a remote sensing technique based on Differential InSAR (DInSAR) approaches. PSInSAR™ makes it possible to identify pixels that present stabilized phase related to the dispersion index. These pixels contain dispersed permanent features as man-made structures which includes bridges, dams, the building roofs, buildings, houses, and some natural features such as rocks and quarries. Thus, by analyzing the phase of these pixels, PSInSAR™ can overcome some difficulties found in the DInSAR technique such as problems related to atmospheric, temporal, and spatial decorrelations. Since its inception in the early 2000s and due to its ability to map surface deformation with millimeter precision, PSInSAR™ has been widely used to recognize deformation in risk areas such as sink/uplift and landslides. Thus, this article sought to describe the basic principle of the PSInSAR™ technique, focusing on how it has been used in the national and international context. In addition, we also show some commercial and open-source packages for PSInSAR™ processing.
- Open Access
- 15 February 2023
- Published by Universidade Tecnologica Federal do Parana (UTFPR) in Revista Brasileira de Geomática
- Vol. 10 (4) , 295-314
Avaliação de modelos globais do geopotencial em zonas costeiras do Brasil
Estudos em zonas costeiras vão ao encontro dos propósitos da Geodésia que tem como principal objetivo contribuir no monitoramento das variações do Sistema Terra e das perspectivas futuras deste campo, através da concepção do Sistema Geodésico Global de Observação (Global Geodetic Observing System - GGOS) e do estabelecimento da Rede de Referência Altimétrica Internacional (International Height Reference Frame - IHRF). Este estudo visa avaliar Modelos Globais do Geopotencial (MGGs) em zonas costeiras do Brasil com o objetivo central de investigar o comportamento desses modelos nestas regiões e colaborar com as discussões acerca da unificação dos referenciais verticais oceânico e terrestre, além do estabelecimento do IHRF. Após a delimitação da área de estudo, com base na comparação de modelos globais e observações locais do funcional anomalia de altitude em 550 estações geodésicas, foi possível encontrar resultados que indicam os MGGs que melhor se adequam nas zonas costeiras brasileiras. A avaliação foi realizada a partir de dados GNSS (GPS) e Nivelamento utilizando o método absoluto para a análise. Foram selecionados 13 (treze) modelos, sendo que todos foram analisados em quatro categorias, em função da resolução espectral, sendo elas: a de modelos com grau de desenvolvimento máximo; a segunda com grau de desenvolvimento elevado (1420 a 2190); a terceira com grau de desenvolvimento médio (até 720); e a quarta com o grau de desenvolvimento mais baixo (até 360). Os modelos que apresentaram os melhores resultados foram o XGM2019e_2159 nas três primeiras categorias de análise e o GGM05C na quarta categoria com modelos com desenvolvimento até o grau 360.
- 15 February 2023
- Published by Universidade Tecnologica Federal do Parana (UTFPR) in Revista Brasileira de Geomática
- Vol. 10 (4) , 295-314
Open AccessAvaliação de modelos globais do geopotencial em zonas costeiras do Brasil
Estudos em zonas costeiras vão ao encontro dos propósitos da Geodésia que tem como principal objetivo contribuir no monitoramento das variações do Sistema Terra e das perspectivas futuras deste campo, através da concepção do Sistema Geodésico Global de Observação (Global Geodetic Observing System - GGOS) e do estabelecimento da Rede de Referência Altimétrica Internacional (International Height Reference Frame - IHRF). Este estudo visa avaliar Modelos Globais do Geopotencial (MGGs) em zonas costeiras do Brasil com o objetivo central de investigar o comportamento desses modelos nestas regiões e colaborar com as discussões acerca da unificação dos referenciais verticais oceânico e terrestre, além do estabelecimento do IHRF. Após a delimitação da área de estudo, com base na comparação de modelos globais e observações locais do funcional anomalia de altitude em 550 estações geodésicas, foi possível encontrar resultados que indicam os MGGs que melhor se adequam nas zonas costeiras brasileiras. A avaliação foi realizada a partir de dados GNSS (GPS) e Nivelamento utilizando o método absoluto para a análise. Foram selecionados 13 (treze) modelos, sendo que todos foram analisados em quatro categorias, em função da resolução espectral, sendo elas: a de modelos com grau de desenvolvimento máximo; a segunda com grau de desenvolvimento elevado (1420 a 2190); a terceira com grau de desenvolvimento médio (até 720); e a quarta com o grau de desenvolvimento mais baixo (até 360). Os modelos que apresentaram os melhores resultados foram o XGM2019e_2159 nas três primeiras categorias de análise e o GGM05C na quarta categoria com modelos com desenvolvimento até o grau 360.