Xiangchuan Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xiangchuan Wang has a total of 119 co-authors. Here are the top co-authors by number of shared publications:
- Shilong Pan
Nanjing University of Aeronautics and Astronautics
38 shared publications - Cong Ma
National Key Laboratory of Microwave Photonics, Nanjing University of Aeronautics and Astronautics, Nanjing, China
12 shared publications - Lihan Wang
Nanjing University of Aeronautics and Astronautics
12 shared publications Yue Yang
10 shared publications- Xi Liu
Key Laboratory of Radar Imaging and Microwave Photonics, Ministry of Education, Nanjing University of Aeronautics and Astronautics, Nanjing, China
7 shared publications Fengting Cao
National Key Laboratory of Microwave Photonics, Nanjing University of Aeronautics and Astronautics, Nanjing, China
6 shared publications
Latest Publications
- 1 December 2026
- Published byĀ Institute of Electrical and Electronics Engineers (IEEE)Ā inĀ IEEE Photonics Technology Letters
- Vol.Ā 38 Ā (23) , 1885-1888
High-Resolution and Wide-Range Ranging for Optical Fibers Free From Coherence Length Limitation
- 1 December 2026
- Published byĀ Institute of Electrical and Electronics Engineers (IEEE)Ā inĀ IEEE Photonics Technology Letters
- Vol.Ā 38 Ā (23) , 1885-1888
High-Resolution and Wide-Range Ranging for Optical Fibers Free From Coherence Length Limitation
- 1 October 2026
- Published byĀ Institute of Electrical and Electronics Engineers (IEEE)Ā inĀ IEEE Transactions on Antennas and Propagation
- Vol.Ā 74 Ā (10) , 9498-9509
Millimeter-Wave Broadband Wide-Scanning Phased Array With Stable Scanning Gain Based on Broadband Planar Decoupling Path
- 1 October 2026
- Published byĀ Institute of Electrical and Electronics Engineers (IEEE)Ā inĀ IEEE Transactions on Antennas and Propagation
- Vol.Ā 74 Ā (10) , 9498-9509
Millimeter-Wave Broadband Wide-Scanning Phased Array With Stable Scanning Gain Based on Broadband Planar Decoupling Path
- 30 September 2026
- Published byĀ Optica Publishing GroupĀ inĀ Optics Express
- Vol.Ā 34 Ā (20) , 38127
Optically controlled phased array transmitter with a controllable main lobe and null
Phased array transmitters often operate in contested electromagnetic environments. To achieve secure transmission and low probability of intercept operation, flexible beam control and generating a null to reduce radiation toward undesired directions are critical. In this work, a wideband optically controlled phased-array (OCPA) transmitter with flexible and independent control of the main lobe and null from a system control perspective is proposed. The proposed system integrates a spatial filter module consisting of an optical true-time delay network and balanced photodetectors. Simulation results for a 16-element OCPA based on the proposed architecture demonstrate that the main lobe and null can be scanned over a range of at least ±40° while maintaining a null depth greater than 50 dB. A proof-of-concept experiment is further carried out using a 5-element OCPA transmitter. The results show that the main lobe and null can be independently steered, with a null depth exceeding 50 dB.
- 30 September 2026
- Published byĀ Optica Publishing GroupĀ inĀ Optics Express
- Vol.Ā 34 Ā (20) , 38127
Optically controlled phased array transmitter with a controllable main lobe and null
Phased array transmitters often operate in contested electromagnetic environments. To achieve secure transmission and low probability of intercept operation, flexible beam control and generating a null to reduce radiation toward undesired directions are critical. In this work, a wideband optically controlled phased-array (OCPA) transmitter with flexible and independent control of the main lobe and null from a system control perspective is proposed. The proposed system integrates a spatial filter module consisting of an optical true-time delay network and balanced photodetectors. Simulation results for a 16-element OCPA based on the proposed architecture demonstrate that the main lobe and null can be scanned over a range of at least ±40° while maintaining a null depth greater than 50 dB. A proof-of-concept experiment is further carried out using a 5-element OCPA transmitter. The results show that the main lobe and null can be independently steered, with a null depth exceeding 50 dB.
- 1 September 2026
- Published byĀ Institute of Electrical and Electronics Engineers (IEEE)Ā inĀ IEEE Transactions on Microwave Theory and Techniques
- Vol.Ā 74 Ā (9) , 8395-8402
Cell-Free Coherent Joint Transmission for 6G ISAC Enabled by Microwave Photonic Synchronization
- 1 September 2026
- Published byĀ Institute of Electrical and Electronics Engineers (IEEE)Ā inĀ IEEE Transactions on Microwave Theory and Techniques
- Vol.Ā 74 Ā (9) , 8395-8402
Cell-Free Coherent Joint Transmission for 6G ISAC Enabled by Microwave Photonic Synchronization
- 26 June 2026
- Published byĀ Optica Publishing GroupĀ inĀ Photonics Research
- Vol.Ā 14 Ā (9) , 3842
Gain-Engineered Optomechanical Oscillator with Ultra Stability
Brillouin optomechanics holds significant potential for phonon lasers and high-purity microwave generation. However, its performance is often susceptible to external environmental disturbances, which limits the practical application of phonon lasers and microwave sources. To address this issue, this paper presents an innovative approach based on gain profile engineering. By exciting optomechanical oscillation in an optical fiber waveguide, we achieve ultra-stable microwave signal generation that exhibits insensitivity to external temperature fluctuations. This optomechanical oscillator, which integrates synergistic control of optical, acoustic, and electric fields, demonstrates considerable promise for applications in quantum information processing and phononic frequency comb generation. Our work introduces, to our knowledge, a new degree of freedom for the control of optomechanical systems and is expected to advance the development of related cutting-edge technologies.
- 26 June 2026
- Published byĀ Optica Publishing GroupĀ inĀ Photonics Research
- Vol.Ā 14 Ā (9) , 3842
Gain-Engineered Optomechanical Oscillator with Ultra Stability
Brillouin optomechanics holds significant potential for phonon lasers and high-purity microwave generation. However, its performance is often susceptible to external environmental disturbances, which limits the practical application of phonon lasers and microwave sources. To address this issue, this paper presents an innovative approach based on gain profile engineering. By exciting optomechanical oscillation in an optical fiber waveguide, we achieve ultra-stable microwave signal generation that exhibits insensitivity to external temperature fluctuations. This optomechanical oscillator, which integrates synergistic control of optical, acoustic, and electric fields, demonstrates considerable promise for applications in quantum information processing and phononic frequency comb generation. Our work introduces, to our knowledge, a new degree of freedom for the control of optomechanical systems and is expected to advance the development of related cutting-edge technologies.
- 3 June 2026
- Published byĀ Institute of Electrical and Electronics Engineers (IEEE)Ā inĀ IEEE Transactions on Radar Systems
- Vol.Ā 4, 1016-1024
Photonics-Based Superresolution Radar Imaging With Space-Time-Frequency Coincidence Processing
A photonics-based super-resolution radar imaging system using space-time-frequency coincidence processing is proposed and experimentally demonstrated. In the transmitter, a broadband frequency-hopping (FH) signal is generated by an optically injected semiconductor laser based on P1 oscillation dynamic. The generated signal is switched and transmitted through a uniform linear antenna array by means of time division multiplexing (TDM). Thereinto, a space-time-frequency three-dimensional stochastic radiation field is constructed, which is manifested as wavefront modulation. In the receiver, the radar echoes are received and frequency down-converted to baseband through IQ mixing. Thanks to the broadband operation capability of the microwave photonic system, high range resolution can be easily achieved. To overcome the azimuth resolution limitation determined by the array aperture size, a kernel function-based sparse reconstruction algorithm is proposed, which enables super-resolution coincidence imaging in azimuth direction. In the experiments, a photonics-based 4Ć1 multiple-input single-output (MISO) radar with a bandwidth of 8 GHz (10-18 GHz) is established, in which the transmitted signal is a 32-level FH signal. Combined with the proposed coincidence imaging algorithm, super-resolution radar imaging is realized with the range-azimuth imaging resolution reaching 2.3 cm Ć 0.8 cm, which surpasses the traditional MISO radar with 20 times higher in azimuth resolution. In addition, the imaging experiments of complex targets with N, V, A shapes and an aircraft model with continuous structure are demonstrated to imitate real scene, which verify the feasibility of the proposed photonics-based radar system in high-resolution forward-looking imaging.
- 3 June 2026
- Published byĀ Institute of Electrical and Electronics Engineers (IEEE)Ā inĀ IEEE Transactions on Radar Systems
- Vol.Ā 4, 1016-1024
Photonics-Based Superresolution Radar Imaging With Space-Time-Frequency Coincidence Processing
A photonics-based super-resolution radar imaging system using space-time-frequency coincidence processing is proposed and experimentally demonstrated. In the transmitter, a broadband frequency-hopping (FH) signal is generated by an optically injected semiconductor laser based on P1 oscillation dynamic. The generated signal is switched and transmitted through a uniform linear antenna array by means of time division multiplexing (TDM). Thereinto, a space-time-frequency three-dimensional stochastic radiation field is constructed, which is manifested as wavefront modulation. In the receiver, the radar echoes are received and frequency down-converted to baseband through IQ mixing. Thanks to the broadband operation capability of the microwave photonic system, high range resolution can be easily achieved. To overcome the azimuth resolution limitation determined by the array aperture size, a kernel function-based sparse reconstruction algorithm is proposed, which enables super-resolution coincidence imaging in azimuth direction. In the experiments, a photonics-based 4Ć1 multiple-input single-output (MISO) radar with a bandwidth of 8 GHz (10-18 GHz) is established, in which the transmitted signal is a 32-level FH signal. Combined with the proposed coincidence imaging algorithm, super-resolution radar imaging is realized with the range-azimuth imaging resolution reaching 2.3 cm Ć 0.8 cm, which surpasses the traditional MISO radar with 20 times higher in azimuth resolution. In addition, the imaging experiments of complex targets with N, V, A shapes and an aircraft model with continuous structure are demonstrated to imitate real scene, which verify the feasibility of the proposed photonics-based radar system in high-resolution forward-looking imaging.
- 22 April 2026
- Published byĀ WileyĀ inĀ Microwave and Optical Technology Letters
- Vol.Ā 68 Ā (4)
Stable DualāBeam Metasurface Antenna Array Based on Wideband Positive Phase Response Method
A wideband positive phase response method is proposed and applied to the design of a seriesāfed dualābeam metasurface antenna (MSA) array. By employing two types of metasurface cells, two closely spaced resonant modes can be excited, thereby enabling a positive phase response over a wide frequency range for the MSA element. Then a dualābeam MSA array is realized by a twoāport feeding network and four elements. Both simulated and measured results demonstrate that the proposed MSA array maintains a stable beam angle over a relative bandwidth of 20.4%. Compared with other designs in published literature, the proposed MSA array exhibits the advantages of a wideband stable beam angle, compact design, and simple structure. This demonstrates that the proposed positive phase response method is effective in achieving a wideband stable beam angle. Consequently, the MSA array developed using this approach shows strong potential for use in compact wideband wireless communication systems.
- 22 April 2026
- Published byĀ WileyĀ inĀ Microwave and Optical Technology Letters
- Vol.Ā 68 Ā (4)
Stable DualāBeam Metasurface Antenna Array Based on Wideband Positive Phase Response Method
A wideband positive phase response method is proposed and applied to the design of a seriesāfed dualābeam metasurface antenna (MSA) array. By employing two types of metasurface cells, two closely spaced resonant modes can be excited, thereby enabling a positive phase response over a wide frequency range for the MSA element. Then a dualābeam MSA array is realized by a twoāport feeding network and four elements. Both simulated and measured results demonstrate that the proposed MSA array maintains a stable beam angle over a relative bandwidth of 20.4%. Compared with other designs in published literature, the proposed MSA array exhibits the advantages of a wideband stable beam angle, compact design, and simple structure. This demonstrates that the proposed positive phase response method is effective in achieving a wideband stable beam angle. Consequently, the MSA array developed using this approach shows strong potential for use in compact wideband wireless communication systems.
- 24 February 2026
- Published byĀ Institute of Electrical and Electronics Engineers (IEEE)Ā inĀ Journal of Lightwave Technology
- Vol.Ā 44 Ā (10) , 3923-3930
Unambiguous DFS Measurement System Based on an Integrated Photonic Chip With Wavelength-Selective Modulation
This paper presents and experimentally demonstrates a Doppler frequency shift (DFS) measurement system based on on-chip coherent wavelength-selective modulation, fabricated on a lithium niobate on insulator platform. The device employs a Mach-Zehnder interferometer-like structure with parallel arms, each consisting of a cascaded micro-ring resonator and phase modulator. By independently modulating the transmitted and echo signals on different wavelengths, the DFS is determined from the beat frequency generated between their corresponding sidebands. This methodology exhibits inherent robustness against both power fluctuations and wavelength-selection imperfections. Experimental characterization using 12 GHz, 15 GHz, and 18 GHz signals demonstrated a maximum measurement error within ±0.6 Hz over a DFS range of ±100 kHz. Simulation results further confirm the systemās ability to distinguish between multiple moving targets with identical speeds but opposing directions.
- 24 February 2026
- Published byĀ Institute of Electrical and Electronics Engineers (IEEE)Ā inĀ Journal of Lightwave Technology
- Vol.Ā 44 Ā (10) , 3923-3930
Unambiguous DFS Measurement System Based on an Integrated Photonic Chip With Wavelength-Selective Modulation
This paper presents and experimentally demonstrates a Doppler frequency shift (DFS) measurement system based on on-chip coherent wavelength-selective modulation, fabricated on a lithium niobate on insulator platform. The device employs a Mach-Zehnder interferometer-like structure with parallel arms, each consisting of a cascaded micro-ring resonator and phase modulator. By independently modulating the transmitted and echo signals on different wavelengths, the DFS is determined from the beat frequency generated between their corresponding sidebands. This methodology exhibits inherent robustness against both power fluctuations and wavelength-selection imperfections. Experimental characterization using 12 GHz, 15 GHz, and 18 GHz signals demonstrated a maximum measurement error within ±0.6 Hz over a DFS range of ±100 kHz. Simulation results further confirm the systemās ability to distinguish between multiple moving targets with identical speeds but opposing directions.
- 8 December 2025
- Published byĀ Institute of Electrical and Electronics Engineers (IEEE)Ā inĀ IEEE Transactions on Antennas and Propagation
- Vol.Ā 74 Ā (2) , 1345-1355
E-Band Wide-Angle Scanning Antenna Array Using Controllable Decoupling Paths With High Isolation and Good Active Impedance Matching
This manuscript presents a E-band phased antenna array based on controllable decoupling path for wide-angle scanning applications. The decoupling path is implemented by loading a pair of I-shaped strip with two grounded vias and a parasitic grounded via on both sides of the antenna to eliminate the inherent coupling between elements in array, enabling the control of amplitude and phase. According to the equivalent circuit analysis, the I - shaped strip is mainly used to control the phase and magnitude of the energy in the decoupling path, and the parasitic via is used to further adjust the phase of the energy, accurately canceling the inherent coupling between different elements of the array. To verify this, a wide-scanning phased array using stacked metasurfaces was designed, where the controllable decoupling paths are symmetrically located on both sides of the elements along the E-plane, achieving high isolation and minimal impact on impedance matching. As a result, the array has a high isolation of over 20 dB and a wide-angle beam scanning of up to ±62° within a broad bandwidth of 66-76 GHz (19.7%). Additionally, the gain fluctuation is less than 2.9 dBi, the active S-parameters remain below -10 dB, and the antenna efficiency reaches 71%. Compared with other works, this array has the advantages of wide-angle scanning, high isolation, and good active impedance matching in the E-band, and has potential application prospects in future millimeter-wave communications.
- 8 December 2025
- Published byĀ Institute of Electrical and Electronics Engineers (IEEE)Ā inĀ IEEE Transactions on Antennas and Propagation
- Vol.Ā 74 Ā (2) , 1345-1355
E-Band Wide-Angle Scanning Antenna Array Using Controllable Decoupling Paths With High Isolation and Good Active Impedance Matching
This manuscript presents a E-band phased antenna array based on controllable decoupling path for wide-angle scanning applications. The decoupling path is implemented by loading a pair of I-shaped strip with two grounded vias and a parasitic grounded via on both sides of the antenna to eliminate the inherent coupling between elements in array, enabling the control of amplitude and phase. According to the equivalent circuit analysis, the I - shaped strip is mainly used to control the phase and magnitude of the energy in the decoupling path, and the parasitic via is used to further adjust the phase of the energy, accurately canceling the inherent coupling between different elements of the array. To verify this, a wide-scanning phased array using stacked metasurfaces was designed, where the controllable decoupling paths are symmetrically located on both sides of the elements along the E-plane, achieving high isolation and minimal impact on impedance matching. As a result, the array has a high isolation of over 20 dB and a wide-angle beam scanning of up to ±62° within a broad bandwidth of 66-76 GHz (19.7%). Additionally, the gain fluctuation is less than 2.9 dBi, the active S-parameters remain below -10 dB, and the antenna efficiency reaches 71%. Compared with other works, this array has the advantages of wide-angle scanning, high isolation, and good active impedance matching in the E-band, and has potential application prospects in future millimeter-wave communications.
- 19 August 2025
- Published byĀ Institute of Electrical and Electronics Engineers (IEEE)Ā inĀ IEEE Photonics Technology Letters
- Vol.Ā 37 Ā (22) , 1325-1328
Sparse Transfer Response-Based Incoherent OFDR With High Accuracy and Low Overhead
An incoherent optical frequency domain reflectometry (I-OFDR) method enhanced by orthogonal matching pursuit (OMP) and phase-derived ranging (PDR) is proposed to enable high-accuracy multipath delay measurement with reduced computational complexity. Unlike traditional I-OFDR systems that require continuous linear frequency sweeping, the proposed method performs sparse RF response acquisition and avoids fixed frequency interval constraints inherent in Fourier-based analysis. Experimental results demonstrate that the proposed method achieves sub-picosecond-level multipath transfer delay accuracy while requiring only 10% of the frequency points needed by traditional I-OFDR methods, greatly reducing the signal processing requirement.
- 19 August 2025
- Published byĀ Institute of Electrical and Electronics Engineers (IEEE)Ā inĀ IEEE Photonics Technology Letters
- Vol.Ā 37 Ā (22) , 1325-1328
Sparse Transfer Response-Based Incoherent OFDR With High Accuracy and Low Overhead
An incoherent optical frequency domain reflectometry (I-OFDR) method enhanced by orthogonal matching pursuit (OMP) and phase-derived ranging (PDR) is proposed to enable high-accuracy multipath delay measurement with reduced computational complexity. Unlike traditional I-OFDR systems that require continuous linear frequency sweeping, the proposed method performs sparse RF response acquisition and avoids fixed frequency interval constraints inherent in Fourier-based analysis. Experimental results demonstrate that the proposed method achieves sub-picosecond-level multipath transfer delay accuracy while requiring only 10% of the frequency points needed by traditional I-OFDR methods, greatly reducing the signal processing requirement.