Florian Dietrich

Cities are hotspots for anthropogenic greenhouse gas (GHG) emissions and, therefore, play an essential role in mitigating climate change. It is crucial to accurately monitor urban GHG emissions to track the reduction targets that many cities have set. The ICOS Cities project aims to pioneer GHG measurement methodologies. Munich, along with Zurich and Paris, serves as one of the pilot cities for this project. Here, we present key results of the ICOS Cities project for Munich.We developed a multi-scale sensor network in Munich, including five solar-tracking spectrometers (MUCCnet) for total column CO2, CH4, and CO measurements, 20 mid-cost CO2 sensor systems, 99 low-cost CO2 sensors, and 30 low-cost air quality sensor systems on rooftops and streetlamps. A mobile measurement unit, consisting of an e-bike carrying a high-precision instrument, is used to find emission hotspots in the city. In addition, CO2 and CH4 satellites specifically target Munich to enable a comparative analysis with MUCCnet.To achieve a high-resolution and accurate emission estimate for Munich, we also developed (i) an emission inventory with high spatial and temporal resolution (100m, hourly) for the road traffic, heating, public power, and human respiration sectors; (ii) a microscale transport model (10m, hourly) based on GRAMM/GRAL simulations; and (iii) a high-resolution biosphere model (10m, hourly) based on VPRM using a self-developed vegetation land cover (1m) and Sentinel-2 satellite vegetation indices.Combining these fundamental components, we performed inverse modeling to assess the emissions in Munich for more than five years. We compared the performances of inverse modeling algorithms using different background approaches, transport models, and prior emissions. Changes due to interventions and policies, e.g., COVID lockdown and energy transition, can be observed in the emission assessments. We present measurement-based emission trends determined by our observations and modeling tools, and provide recommendations on monitoring strategies for other cities.

The precise knowledge of the global atmospheric concentrations of green-house gases (GHG) are crucial for understanding and monitoring climate change.Satellites for measuring GHGs are offering a global coverage, however, they need precise ground-based reference data for validation.This reference data is provided by ground-based measurements, foremost the Total Column Carbon Observing Network (TCCON).The TCCON measures column averages of GHG abundances at about 25 stations around the globe using Fourier Transform Infrared (FTIR) spectrometer.For achieving the high data quality needed for the validation of current and upcoming GHG measuring satellite missions the control of site-by-site biases across the network is of utmost importance. So far, the verification of the individual TCCON sites mainly depends on the collection of collocated in situ measurements of GHG profiles, using airplane overflights or balloon air-core measurements, the use of calibrated HCl gas cells and on the evaluation of XAIR. In this work we present a new supplemental approach by using the portable EM27/SUN FTIR spectrometer, which is the standard instrument of the Collaborative Carbon Column Observing Network (COCCON). This instrument type has proven its high stability in various field campaigns and long-term studies. In the framework of the ESA project “Fiducial Reference Measurements for Green-House Gases II” we are exploiting the stability of the instrument to use it as a Travel Standard (TS) for the TCCON. We visited sites in Japan, Canada, Germany, Australia, France and the Canary Islands to perform side-by-side measurements with the local TCCON spectrometers. Between the visits, the stability of the TS was monitored using the Karlsruhe TCCON site and the COCCON reference spectrometer.This allows to compare the different TCCON sites to a common reference and hence, to verify the level of station-to-station consistency currently achieved by the TCCON and support further improvements. Here, we present the results of the TS visit at the TCCON site Tsukuba(Japan), Wollongong(Australia) and Izana(Canary Islands).

To fight climate change, it is crucial to have a precise knowledge of greenhouse gas (GHG) concentrations in the atmosphere and to monitor sources and sinks of GHGs. On global scales, satellites are an appropriate monitoring tool. For the validation of the satellite measurements and to tie them to the World Meteorological Organization (WMO) trace gas scale, ground-based Fourier transform infrared (FTIR) networks are used, which provide reference data. To ensure the highest-quality validation data, the network must be scaled to the WMO trace gas scale and have a very small site-to-site bias. Currently, the Total Carbon Column Observing Network (TCCON) is the de facto standard FTIR network for providing reference data. Ensuring a small site-to-site bias is a major challenge for the TCCON. In this work, we describe the development and application of a new method to evaluate the site-to-site bias by using a remotely controlled portable FTIR spectrometer as a travel standard (TS) for evaluating the consistency of columnar GHG measurements performed at different TCCON stations, and we describe campaign results for the TCCON sites in Tsukuba (Japan), East Trout Lake (Canada) and Wollongong (Australia). The TS is based on a characterized portable EM27/SUN FTIR spectrometer equipped with an accurate pressure sensor which is operated in an automated enclosure. The EM27/SUN is the standard instrument of the Collaborative Carbon Column Observing Network (COCCON). The COCCON is designed such that all spectrometers are referenced to a common reference unit located in Karlsruhe, Germany. To evaluate the long-term stability of the TS instrument, it is placed side-by-side with the TCCON instrument in Karlsruhe (KA) and the COCCON reference unit (the EM27/SUN spectrometer SN37, which is operated permanently next to the TCCON-KA site) between deployments to collect comparing measurements. At each of the visited TCCON sites, the TCCON spectrometers collected low-resolution (LR) (0.5 cm⁻¹) and high-resolution (HR) (0.02 cm⁻¹) measurements in an alternating manner. Based on the TS as a portable standard, the measurements are compared to the Karlsruhe site as a common reference. For Tsukuba and Wollongong, the agreement with the reference in Karlsruhe found for XCO₂ is on the 0.1 % level for both the LR and HR measurements. For XCH₄, the agreement is at the 0.2 % level, with the low-resolution measurements showing a low bias at both sites and for both gases. For XCO, the deviations are up to 7 %. The reason for this is likely to be a known issue with the CO a priori profiles used by the TCCON over source regions. In East Trout Lake (ETL), the TCCON spectrometer broke down while the TS was en route to the station. Hence, no side-by-side comparison was possible there. An important auxiliary value for FTIR retrievals is the surface pressure. Using the pressure sensor in the TS, the surface pressure measurements at each site are also compared. The surface pressure analysis reveals excellent agreement (0.027, 0.135 and 0.094 hPa) for the Tsukuba, ETL and Wollongong sites.

To fight climate change it is crucial to have a precise knowledge of Greenhouse Gas (GHG) concentrations in the atmosphere and to monitor sources and sinks of GHGs. On global scales, satellites are an appropriate monitoring tool. For the validation of the satellite measurements, and to tie them to the World Meteorological Organization (WMO) trace gas scale, ground based Fourier Transform Infrared (FTIR) networks are used, which provide reference data. To ensure the highest quality validation data, the network must be scaled to the WMO trace gas scale and have a very small site-to-site bias. Currently, the Total Carbon Column Observing Network (TCCON) is the de-facto standard FTIR network for providing reference data. To ensure a small site-to-site bias is a major challenge for the TCCON. In this work we describe the development and application of a new method to evaluate the site-to-site bias by using a remotely controlled portable FTIR spectrometer as a Travel Standard (TS) for evaluating the consistency of columnar GHG measurements performed at different TCCON stations and we describe campaign results for the TCCON sites in Tsukuba (Japan), East Trout Lake (Canada) and Wollongong (Australia). The TS is based on a characterized portable EM27/SUN FTIR spectrometer equipped with an accurate pressure sensor which is operated in an automated enclosure. The EM27/SUN is the standard instrument of the Collaborative Carbon Column Observing Network (COCCON). The COCCON is designed such that all spectrometers are referenced to a common reference unit located in Karlsruhe, Germany. To evaluate the long-term stability of the TS instrument, it is placed side-by-side with the TCCON instrument in Karlsruhe and the COCCON reference unit (the EM27/SUN spectrometer SN37, which is operated permanently next to the TCCON-KA site) between deployments to collect comparing measurements. At each of the visited TCCON sites, the TCCON spectrometers collected low-resolution (LR) (0.5 cm^-1) and high-resolution (HR) (0.02 cm^-1) measurements in an alternating manner. In East Trout Lake (ETL), the TCCON spectrometer broke down while the TS was en route to the station. Hence, no side-by-side comparison was possible there. For Tsukuba and Wollongong the agreement found for XCO₂ is on the 0.1 % level. For XCH₄ the agreement is at the 0.2 % level, with the low-resolution measurements showing a low bias at both sites and for both gases. For XCO the deviations are up to 7 %. The reason for this is likely to be an known issue with the CO a priori profiles used by TCCON over source regions. The pressure analysis reveals excellent agreement (0.027 hPa, 0.135 hPa, and 0.094 hPa) for the Tsukuba, ETL, and Wollongong sites.

To fight climate change it is crucial to have a precise knowledge of Greenhouse Gas (GHG) concentrations in the atmosphere and to monitor sources and sinks of GHGs. On global scales, satellites are an appropriate monitoring tool. For the validation of the satellite measurements, and to tie them to the World Meteorological Organization (WMO) trace gas scale, ground based Fourier Transform Infrared (FTIR) networks are used, which provide reference data. To ensure the highest quality validation data, the network must be scaled to the WMO trace gas scale and have a very small site-to-site bias. Currently, the Total Carbon Column Observing Network (TCCON) is the de-facto standard FTIR network for providing reference data. To ensure a small site-to-site bias is a major challenge for the TCCON. In this work we describe the development and application of a new method to evaluate the site-to-site bias by using a remotely controlled portable FTIR spectrometer as a Travel Standard (TS) for evaluating the consistency of columnar GHG measurements performed at different TCCON stations and we describe campaign results for the TCCON sites in Tsukuba (Japan), East Trout Lake (Canada) and Wollongong (Australia). The TS is based on a characterized portable EM27/SUN FTIR spectrometer equipped with an accurate pressure sensor which is operated in an automated enclosure. The EM27/SUN is the standard instrument of the Collaborative Carbon Column Observing Network (COCCON). The COCCON is designed such that all spectrometers are referenced to a common reference unit located in Karlsruhe, Germany. To evaluate the long-term stability of the TS instrument, it is placed side-by-side with the TCCON instrument in Karlsruhe and the COCCON reference unit (the EM27/SUN spectrometer SN37, which is operated permanently next to the TCCON-KA site) between deployments to collect comparing measurements. At each of the visited TCCON sites, the TCCON spectrometers collected low-resolution (LR) (0.5 cm^-1) and high-resolution (HR) (0.02 cm^-1) measurements in an alternating manner. In East Trout Lake (ETL), the TCCON spectrometer broke down while the TS was en route to the station. Hence, no side-by-side comparison was possible there. For Tsukuba and Wollongong the agreement found for XCO₂ is on the 0.1 % level. For XCH₄ the agreement is at the 0.2 % level, with the low-resolution measurements showing a low bias at both sites and for both gases. For XCO the deviations are up to 7 %. The reason for this is likely to be an known issue with the CO a priori profiles used by TCCON over source regions. The pressure analysis reveals excellent agreement (0.027 hPa, 0.135 hPa, and 0.094 hPa) for the Tsukuba, ETL, and Wollongong sites.

To fight climate change it is crucial to have a precise knowledge of Greenhouse Gas (GHG) concentrations in the atmosphere and to monitor sources and sinks of GHGs. On global scales, satellites are an appropriate monitoring tool. For the validation of the satellite measurements, and to tie them to the World Meteorological Organization (WMO) trace gas scale, ground based Fourier Transform Infrared (FTIR) networks are used, which provide reference data. To ensure the highest quality validation data, the network must be scaled to the WMO trace gas scale and have a very small site-to-site bias. Currently, the Total Carbon Column Observing Network (TCCON) is the de-facto standard FTIR network for providing reference data. To ensure a small site-to-site bias is a major challenge for the TCCON. In this work we describe the development and application of a new method to evaluate the site-to-site bias by using a remotely controlled portable FTIR spectrometer as a Travel Standard (TS) for evaluating the consistency of columnar GHG measurements performed at different TCCON stations and we describe campaign results for the TCCON sites in Tsukuba (Japan), East Trout Lake (Canada) and Wollongong (Australia). The TS is based on a characterized portable EM27/SUN FTIR spectrometer equipped with an accurate pressure sensor which is operated in an automated enclosure. The EM27/SUN is the standard instrument of the Collaborative Carbon Column Observing Network (COCCON). The COCCON is designed such that all spectrometers are referenced to a common reference unit located in Karlsruhe, Germany. To evaluate the long-term stability of the TS instrument, it is placed side-by-side with the TCCON instrument in Karlsruhe and the COCCON reference unit (the EM27/SUN spectrometer SN37, which is operated permanently next to the TCCON-KA site) between deployments to collect comparing measurements. At each of the visited TCCON sites, the TCCON spectrometers collected low-resolution (LR) (0.5 cm^-1) and high-resolution (HR) (0.02 cm^-1) measurements in an alternating manner. In East Trout Lake (ETL), the TCCON spectrometer broke down while the TS was en route to the station. Hence, no side-by-side comparison was possible there. For Tsukuba and Wollongong the agreement found for XCO₂ is on the 0.1 % level. For XCH₄ the agreement is at the 0.2 % level, with the low-resolution measurements showing a low bias at both sites and for both gases. For XCO the deviations are up to 7 %. The reason for this is likely to be an known issue with the CO a priori profiles used by TCCON over source regions. The pressure analysis reveals excellent agreement (0.027 hPa, 0.135 hPa, and 0.094 hPa) for the Tsukuba, ETL, and Wollongong sites.

To fight climate change it is crucial to have a precise knowledge of Greenhouse Gas (GHG) concentrations in the atmosphere and to monitor sources and sinks of GHGs. On global scales, satellites are an appropriate monitoring tool. For the validation of the satellite measurements, and to tie them to the World Meteorological Organization (WMO) trace gas scale, ground based Fourier Transform Infrared (FTIR) networks are used, which provide reference data. To ensure the highest quality validation data, the network must be scaled to the WMO trace gas scale and have a very small site-to-site bias. Currently, the Total Carbon Column Observing Network (TCCON) is the de-facto standard FTIR network for providing reference data. To ensure a small site-to-site bias is a major challenge for the TCCON. In this work we describe the development and application of a new method to evaluate the site-to-site bias by using a remotely controlled portable FTIR spectrometer as a Travel Standard (TS) for evaluating the consistency of columnar GHG measurements performed at different TCCON stations and we describe campaign results for the TCCON sites in Tsukuba (Japan), East Trout Lake (Canada) and Wollongong (Australia). The TS is based on a characterized portable EM27/SUN FTIR spectrometer equipped with an accurate pressure sensor which is operated in an automated enclosure. The EM27/SUN is the standard instrument of the Collaborative Carbon Column Observing Network (COCCON). The COCCON is designed such that all spectrometers are referenced to a common reference unit located in Karlsruhe, Germany. To evaluate the long-term stability of the TS instrument, it is placed side-by-side with the TCCON instrument in Karlsruhe and the COCCON reference unit (the EM27/SUN spectrometer SN37, which is operated permanently next to the TCCON-KA site) between deployments to collect comparing measurements. At each of the visited TCCON sites, the TCCON spectrometers collected low-resolution (LR) (0.5 cm^-1) and high-resolution (HR) (0.02 cm^-1) measurements in an alternating manner. In East Trout Lake (ETL), the TCCON spectrometer broke down while the TS was en route to the station. Hence, no side-by-side comparison was possible there. For Tsukuba and Wollongong the agreement found for XCO₂ is on the 0.1 % level. For XCH₄ the agreement is at the 0.2 % level, with the low-resolution measurements showing a low bias at both sites and for both gases. For XCO the deviations are up to 7 %. The reason for this is likely to be an known issue with the CO a priori profiles used by TCCON over source regions. The pressure analysis reveals excellent agreement (0.027 hPa, 0.135 hPa, and 0.094 hPa) for the Tsukuba, ETL, and Wollongong sites.

To fight climate change it is crucial to have a precise knowledge of Greenhouse Gas (GHG) concentrations in the atmosphere and to monitor sources and sinks of GHGs. On global scales, satellites are an appropriate monitoring tool. For the validation of the satellite measurements, and to tie them to the World Meteorological Organization (WMO) trace gas scale, ground based Fourier Transform Infrared (FTIR) networks are used, which provide reference data. To ensure the highest quality validation data, the network must be scaled to the WMO trace gas scale and have a very small site-to-site bias. Currently, the Total Carbon Column Observing Network (TCCON) is the de-facto standard FTIR network for providing reference data. To ensure a small site-to-site bias is a major challenge for the TCCON. In this work we describe the development and application of a new method to evaluate the site-to-site bias by using a remotely controlled portable FTIR spectrometer as a Travel Standard (TS) for evaluating the consistency of columnar GHG measurements performed at different TCCON stations and we describe campaign results for the TCCON sites in Tsukuba (Japan), East Trout Lake (Canada) and Wollongong (Australia). The TS is based on a characterized portable EM27/SUN FTIR spectrometer equipped with an accurate pressure sensor which is operated in an automated enclosure. The EM27/SUN is the standard instrument of the Collaborative Carbon Column Observing Network (COCCON). The COCCON is designed such that all spectrometers are referenced to a common reference unit located in Karlsruhe, Germany. To evaluate the long-term stability of the TS instrument, it is placed side-by-side with the TCCON instrument in Karlsruhe and the COCCON reference unit (the EM27/SUN spectrometer SN37, which is operated permanently next to the TCCON-KA site) between deployments to collect comparing measurements. At each of the visited TCCON sites, the TCCON spectrometers collected low-resolution (LR) (0.5 cm^-1) and high-resolution (HR) (0.02 cm^-1) measurements in an alternating manner. In East Trout Lake (ETL), the TCCON spectrometer broke down while the TS was en route to the station. Hence, no side-by-side comparison was possible there. For Tsukuba and Wollongong the agreement found for XCO₂ is on the 0.1 % level. For XCH₄ the agreement is at the 0.2 % level, with the low-resolution measurements showing a low bias at both sites and for both gases. For XCO the deviations are up to 7 %. The reason for this is likely to be an known issue with the CO a priori profiles used by TCCON over source regions. The pressure analysis reveals excellent agreement (0.027 hPa, 0.135 hPa, and 0.094 hPa) for the Tsukuba, ETL, and Wollongong sites.

To mitigate methane emission from urban natural gas distribution systems, it is crucial to understand local leak rates and occurrence rates. To explore urban methane emissions in cities outside the U.S., where significant emissions were found previously, mobile measurements were performed in 12 cities across eight countries. The surveyed cities range from medium size, like Groningen, NL, to large size, like Toronto, CA, and London, UK. Furthermore, this survey spanned across European regions from Barcelona, ES, to Bucharest, RO. The joint analysis of all data allows us to focus on general emission behavior for cities with different infrastructure and environmental conditions. We find that all cities have a spectrum of small, medium, and large methane sources in their domain. The emission rates found follow a heavy-tailed distribution, and the top 10% of emitters account for 60-80% of total emissions, which implies that strategic repair planning could help reduce emissions quickly. Furthermore, we compare our findings with inventory estimates for urban natural gas-related methane emissions from this sector in Europe. While cities with larger reported emissions were found to generally also have larger observed emissions, we find clear discrepancies between observation-based and inventory-based emission estimates for our 12 cities.