JZJinyong Zhang

Jinyong Zhang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jinyong Zhang has a total of 69 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Effects of h-BN Doping on the Microstructure, Mechanical Properties, and Dielectric Properties of Silicon Nitride Ceramics

    by Xia Liu, Ying Wang, Hongfei Shao, Xin Zhang, Jinyong Zhang

    Silicon nitride ceramics exhibit excellent structural strength and electromagnetic wave transmission performance, yet demonstrate significant thermal shock instability under extreme conditions. Boron nitride (BN), on the other hand, possesses outstanding thermal shock resistance and electromagnetic wave transmission properties but exhibits relatively lower structural strength. Compositing these two materials holds promise for developing an integrated material that combines high-temperature load-bearing capacity with wave transmission capability. This study employed spark plasma sintering (SPS) technology to systematically investigate how varying BN content affects the sintering densification process and microstructural evolution of Si3N4/BN composite ceramics. Furthermore, we elucidated the mechanisms by which material composition and processing parameters influence key mechanical properties, dielectric characteristics, and other multifunctional attributes of the composites, providing a theoretical foundation for synergistic optimization design. The results indicate that BN incorporation suppresses both the phase transition from α-Si3N4 to β-Si3N4 during sintering and the growth of elongated β-Si3N4 crystals: the former hinders densification while the latter promotes it, resulting in a dual competitive mechanism that initially increases followed by decreases in sintered density. The effects of BN content on elastic modulus and fracture toughness align with trends in sintering density, whereas hardness, flexural strength, dielectric constant, and dielectric loss all show a monotonically decreasing trend with increasing BN content.

  • Engineering Vanadium Oxide Coordination Structure and Exposing Specific Crystal Planes for High‐Performance Electrochromism

    by Shichuang Cui, Zuhao Shi, Desheng Chen, Liwen Lei, Quanyao Zhu, Neng Li, Jingyong Zhang

    The electrochromic performance of vanadium pentoxide is limited by sluggish ion diffusion kinetics and poor cycling stability. Herein, we present an effective strategy to regulate the V─O chemical coordination environment and preferentially expose the (001) crystal planes, thereby enabling rapid Zn‐ion diffusion, faster switching kinetics, and enhanced long‐term stability. Impressively, in situ testing and density functional theory reveal that the synergy between the [VO 6 ] octahedra and exposed (001) facets enhances electrochromic performance by enabling efficient ion diffusion pathways, providing ample storage sites, and facilitating charge transfer. The resulting thin films exhibit rich, reversible color transitions spanning from orange‐red to blue‐gray, along with a high optical modulation of 59.4% at 668 nm. Furthermore, the electrochromic films are adaptable to diverse natural environments, enabling applications in adaptive camouflage and visual monitoring of energy states via color conversion. This work provides fundamental insights into structure‐property relationships in V 2 O 5 and offers a rational design strategy for high‐performance electrochromic materials in next‐generation smart devices.


  • Open Access

    Numerical Investigation of a Variable Cross‐Section Perforated Gun Barrel for Enhanced Dynamic and Thermal Performance

    by Xiang Liu, Yuhang Liu, Xin Lai, Lisheng Liu, Jinyong Zhang

    This research introduces a novel gun barrel design featuring a variable cross‐section and three‐way symmetric perforations (VTSP), which combines an axially graded wall profile with periodically arranged triple‐symmetry holes. An integrated computational fluid dynamics (CFD) and finite element analysis (FEA) framework is developed to evaluate the internal ballistic, thermal, mechanical, fatigue, and modal responses of the VTSP barrel relative to a traditional solid barrel. Under the investigated numerical conditions, the VTSP design achieves a mass reduction of 9.3% while maintaining comparable internal ballistic behavior. The peak von Mises stress at the monitored critical location is 9.4% lower than that of the traditional barrel during the stabilized successive cycles. The perforations increase the area‐averaged external heat‐transfer coefficient by approximately fivefold and redistribute the local thermo‐mechanical stress field toward mixed tensile‐shear states around the perforation zones. The modal results show boundary‐condition‐dependent dynamic characteristics: the free‐free elastic frequencies are lower for VTSP, whereas under identical full‐barrel support conditions the first effective modal pair is 7.9% higher in pair‐averaged frequency and the next supported pair is nearly unchanged. These results indicate a boundary‐condition‐dependent low‐order stiffness‐to‐mass response. These findings demonstrate the design‐level numerical feasibility of the VTSP concept and establish a multiphysics basis for its further optimization. They do not, however, constitute qualification for direct replacement of a conventional barrel in practical service, which requires additional strength‐margin assessment, long‐term durability testing, manufacturing evaluation, and experimental validation.

  • Open Access

    First-Principles Calculation of Mechanical Properties and Thermal Conductivity of C-Doped AlN

    by Hongfei Shao, Ying Wang, Jiahe Song, Liwen Lei, Xia Liu, Xuejun Hou, Jinyong Zhang

    Due to its good thermal conductivity and small thermal expansion coefficient, aluminum nitride (AlN) is an excellent material for thermal shock resistance. Recently, carbon (C) doping has emerged as a potential strategy for tailoring the properties of AlN, but its effects on the mechanical properties and thermal conductivity of AlN remain unclear. In the present study, the mechanical properties and thermal conductivity of C-doped AlN (C@AlN) with various C-doping densities were investigated using first-principles calculations based on density functional theory. The results suggest that C doping often leads to an increase in the c lattice constant. When the C-doping concentration reaches 12.5%, the structural symmetry of 4C@AlN is fully broken. In addition, as the C-doping density increases, the strength and stiffness of C@AlN generally decrease while the ductility increases. Moreover, the thermal conductivity of C@AlN generally decreases as the C-doping density increases, mainly because of the structural distortion. Meanwhile, as the C-doping density reaches 12.5%, the thermal conductivity of 4C@AlN anomalously increases, due to the symmetry breakage.


  • Open Access

    Preparation of Alumina Ceramics via a Two-Step Sintering Process

    by Jiawen Yang, Liwen Lei, Jinyong Zhang

    This paper investigates grain growth and densification kinetics in alumina ceramics subjected to spark plasma sintering (SPS) and conventional pressureless sintering (CS). The findings reveal that, under both sintering conditions, grain growth primarily occurs after reaching the sintering ‘freezing point’. The analysis of densification kinetics indicates that the activation energies of densification of alumina ceramics are 173.6 KJ/mol and 261.2 KJ/mol during the early stage, and 362.2 KJ/mol and 383.7 KJ/mol in the late stage for SPS and CS conditions, respectively. Therefore, a two-step sintering method (TSS) is proposed, where SPS rapidly sinters alumina powder to reach the grain growth ‘freezing point’, and then, the sintered bodies are subjected to CS to obtain dense alumina ceramics. The results show that the flexural strength of alumina prepared using this TSS can reach 489.6 MPa, about 19% improvement over those processed solely through CS.


  • Open Access

    The Temperature-Dependent Thermal Conductivity of C- and O-Doped Si3N4: First-Principles Calculations

    by Hongfei Shao, Jiahao Qiu, Xia Liu, Xuejun Hou, Jinyong Zhang

    Silicon nitride (Si3N4) possesses excellent mechanical properties and high thermal conductivity, which is an important feature in many applications. However, achieving the theoretically high thermal conductivity of Si3N4 in practice is challenging. In this study, we adopted a first-principles calculation method to assess the effects of doping β-Si3N4 and γ-Si3N4 with carbon and oxygen atoms. Applying geometric structure optimization combined with calculation of the electronic phonon properties generated a stable doped structure. The results revealed that carbon and oxygen doping have little effect on the Si3N4 unit cell size, but that oxygen doping increases the unit cell volume. Energy band structure and state density calculation results showed that carbon doping reduces the nitride band gap width, whereas oxygen doping results in an n-type Si3N4 semiconductor. The findings from this study are significant in establishing a basis for targeted increase of the thermal conductivity of Si3N4.


  • Open Access

    Unveiling the Transporting Mechanism of (Ti0.2Zr0.2Nb0.2Hf0.2Ta0.2)C at Room Temperature

    by Tao Liu, Liwen Lei, Jinyong Zhang, Neng Li

    High-entropy materials have been widely researched in recent years, and more work on their thermal and electrical properties is still needed. Herein, we fabricate a high-entropy carbide (Ti0.2Zr0.2Nb0.2Hf0.2Ta0.2)C ceramic and report the thermal and electrical conductivity at room temperature using first-principles calculations and experiments. The movement of phonons is suppressed in high-entropy carbides when analyzing the thermal and electrical conductivity at room temperature, but the movement of electrons is not. After the first-principles calculations on the electronic structure and lattice vibration and experiments, we give the reasons why the rule of mixture can predict electrical conductivity but not thermal conductivity at room temperature. Finally, we outline the cause of the similar lattice patterns between TaC and (Ti0.2Zr0.2Nb0.2Hf0.2Ta0.2)C.