MKMikhail Karuskevich

Mikhail Karuskevich

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Mikhail Karuskevich has a total of 37 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    APPLICATION OF SACRIFICIAL ANODES AND CORROSION SENSORS IN AIRCRAFT FUSELAGE STRUCTURES

    by Mykhailo Karuskevych, Tetiana Maslak, Sviatoslav Yutskevych, Yuliia Bielikova, Valerii Nikitiuk

    The article presents a scientific justification and a novel structural solution for the application of a system of sacrificial anodes and sacrificial corrosion sensor for corrosion protection of the fuselage bottom of a transport-category aircraft. Replaceable elements operating as anodes in the condensate environment accumulating in the underfloor area of the fuselage are used as sacrificial anodes. Periodically replaceable elements of the drain valve are employed as sacrificial corrosion sensor. The sacrificial anodes and sensors are manufactured from a material that, in a condensate environment and in electrical contact with the fuselage skin structure, forms a galvanic couple in which the more active element acts as a source of electrons and positively charged ions, resulting in its degradation while preserving the integrity of the primary structural elements

  • ROTATING BENDING FATIGUE TEST MACHINE

    by Mykhailo Karuskevich, Oleh Karuskevich, Vladyslav Korchuk, Ivan Lozovskyi

    Steel wire ropes are widely employed across numerous industries, particularly in aviation, where they are used in onboard cranes, winches, hoists, mechanical control systems, and cargo-securing tie-down assemblies. The mechanical performance of steel wire ropes is governed by the properties of their individual components. Steel wire is a primary structural element of these ropes. In service, wire ropes are exposed to cyclic operational loading during cargo lifting, movement, and handling, as well as additional dynamic loads caused by acceleration. In many cases, they also operate in unfavorable and aggressive environments. Together, these factors lead to fatigue, wear, and corrosion, critically influencing the service life and reliability of wire ropes. This study presents the development of a compact rotating-bending fatigue testing machine specifically designed to evaluate the fatigue behavior of steel wires. The base configuration is intended for laboratory testing at dry air; however, further upgrades will enable testing in aggressive corrosive media, various surfactants, greases, and corrosion-preventive compounds to investigate adsorption-induced weakening phenomena, including the Rebinder effect. Analytical stress calculations based on Reuleaux’s classical approach were validated by finite element modeling, demonstrating close agreement between the methods. The developed machine provides an efficient and reliable tool for studying fatigue mechanisms in steel wire materials under realistic operating conditions.

  • Open Access

    Fatigue indicators for metal structures: from aircraft to bridges

    by Mykhailo Karuskevych, Tetiana Maslak, Oleg Karuskevych, Yurii Vlasenko

    The papers focus on a fatigue monitoring method for two types of engineering structures: (a) aircraft and (b) steel bridges. However, the potential application of this new approach extends beyond these examples. It is demonstrated that, despite advancements in stress-strain analysis, improvements in fatigue life prediction methods, and progress in contemporary non-destructive inspection techniques, unexpected failures of metal structures still occur. This paper outlines the evolution of Fatigue Indicators for Metal Structures, progressing from conceptual development to a family of indicators capable of monitoring fatigue damage in key structural components. These include aircraft parts made of aluminum alloys and load-bearing elements of steel bridges. All the indicators discussed share a unifying concept: the metal surface subjected to cyclic loading reflects accumulated fatigue damage. The primary parameter used to assess this damage is the intensity of the surface deformation relief (extrusion/intrusion patterns), measured using a computer-aided optical method. The conceptual design of Fatigue Indicators for both uniaxial and biaxial fatigue is explored. The required sensitivity level of the indicators is achieved through the redistribution of the strains by geometric optimization, which is carried out using Finite Element Analysis.

  • Open Access

    МЕТОДИКИ ДОСЛІДЖЕННЯ СТАДІЙ ЗАРОДЖЕННЯ І РОЗПОВСЮДЖЕННЯ ТРІЩИН В АЛЮМІНІЄВИХ СПЛАВАХ В УМОВАХ ДІЇ ПОВЕРХНЕВО-АКТИВНИХ РЕЧОВИН

    by Mykhailo Karuskevich, Olena Korchuk, Oleh Karuskevich, Vladyslav Korchuk

    В статті розглянуто основи методик дослідження інкубаційної стадії втоми і стадії руйнування алюмінієвих сплавів в умовах їх контакту з поверхнево-активними речовинами, зокрема плівкоутворюючими антикорозійними сполуками. Проблема зумовлена зростаючою кількістю речовин, що взаємодіють з елементами літальних апаратів. Підкреслено актуальність вивчення поверхнево-активних речовин у зв’язку з їх потенційним негативним впливом на довговічність конструкцій при циклічному навантаженні. Розроблено методики дослідження інкубаційної стадії втоми шляхом аналізу деформаційного рельєфу поверхні з використанням комп’ютерної обробки зображень. Для вивчення стадії розповсюдження тріщин застосовано підходи механіки руйнування, зокрема визначення швидкості росту тріщин за рівнянням Періса. Встановлено доцільність роздільного вивчення обох стадій втоми для оцінки впливу поверхнево-активних сполук. Методики можуть бути використані при виборі поверхнево-активних речовин, зокрема антикорозійних сполук, мастил, олив, перетворювачів корозії, тощо. Метою роботи є обґрунтування критеріїв впливу поверхнево-активних речовин на обидві стадії втоми: інкубаційну і розповсюдження тріщин.

  • Effect of rolling texture on bearing capacity of aircraft repair patches and replaced panels

    by Mykhailo Karuskevych, Sergiy Ignatovych, Tetiana Maslak, Oleg Karuskevych

    The article combines issues related to biaxial fatigue loading, corrections for equivalent stress calculations, and the practical application of new knowledge regarding biaxial fatigue in the aviation industry. It considers the possibility and expediency of taking into account the anisotropy of metals’ mechanical characteristics in aircraft repair procedures, such as patching and replacing damaged skin panels. The biaxial loading of the skin is shown to be a significant factor that should be considered in the aircraft skin repair process. It is shown that while well-known Huber-Mises formula works well for isotropic materials, the fuselage skin made of anisotropic alloys requires corrections to the Huber-Mises method. For aircraft parts subjected to biaxial loading, the assessment of equivalent uniaxial stresses can be done by introducing the crystallographic factor into the Huber-Mises formula. This is achieved by transforming the biaxial stress components of fuselage loading due to pressurization and bending into the resolved stresses in the activated crystallographic slip systems of the dominant texture.


  • Open Access

    Комплексний підхід до вибору плівкоутворюючих антикорозійних сполук для захисту авіаційних конструкцій від корозії

    by Ievgen Gavrylov, Sergiy Ignatovych, Mykhailo Karuskevych, Tetiana Maslak, Oleg Karuskevych

    This paper considers substantiated by experiments the selection of corrosion-preventing compounds for aircraft structures protection. The influence of corrosion-preventing compounds on the service life of typical riveted joints used in fuselages of planes of the transport category was studied. It was found that corrosion-preventing compounds penetrate the gaps of joints and influence the fatigue life under certain conditions. Based on the hypothesis regarding the influence of friction between the mating elements of joints on fatigue damage and fracture, a device to measure the static friction force between the joined elements in the presence of corrosion-preventing compounds was developed. An experimental study on the influence of an aviation corrosion-preventing compound on the friction forces was conducted. Finite Elements Analysis of the effect of corrosion-preventing compounds on the strain-stress state of the riveted joint elements was conducted. Results of the research on the negative side effects caused by the application of corrosion-preventing compounds are summarized. A study of the fatigue life of riveted joints after treatment with corrosion-preventing compounds, Finite Elements Analysis of the stress-strain state, and determination of the influence on friction are considered as primary components of the complex method for controlling corrosion- preventing compounds. Additional components of the complex method for the study of corrosion-preventing compounds were described. They extend the number of compounds characteristics. Additional components of the complex method are: determination of the influence of preventing compounds on the nucleation stage of fatigue damage, which can be conducted by the parameters of the surface deformation relief; the study of the influence of preventing compounds on fatigue crack propagation stage using linear fracture mechanics approaches; and the determination of the influence of preventing compounds on the secondary bending effect. A structural and logical scheme for assessing the negative side effects of corrosion-preventing compounds is proposed.

  • Open Access

    A REVIEW OF MACHINES FOR WIRE ROPES FATIGUE TEST

    by Sergiy Ignatovych, Mykhailo Karuskevych, Oleg Karuskevych, Tetiana Maslak

    Review of the test machines designed to assess characteristics of steel wire ropes covers analysis of the equipment for fatigue tension-tension tests, torsion tests, sheave bending tests. Variety of the test machines concepts is determined by the diversity of the operational factors influencing the wire ropes loading. The importance of the single wire tests for the understanding of steel wire ropes fatigue behavior in terms of the step-by-step study of the wire ropes damage mechanism study is shown. Necessity to account for effects caused by contact interactions between the wires, as well as between ropes and environment is shown.


  • Influence of corrosion preventive compounds on the friction force in aircraft lap joints

    by Ievgen Gavrylov, Mikhail Karuskevich, Sergey Ignatovich, Sviatoslav Yutskevych, Tetiana Maslak


  • Влияние антикоррозионных пленкообразующих составов на усталость авиационных конструкций. Обзор исследований

    by Михаил Витальевич Карускевич, Сергей Ромуальдович Игнатович, Татьяна Петровна Маслак, Александр Иванович Семенец, Евгений Павлович Гаврилов

    Corrosion of aircraft structures is one of the main factors limiting the duration of their operation, affecting on the economic efficiency and safety of air transport. Corrosion protection is performed at the stage of manufacturing aircraft structures, during their repair and operation. One of the additional measures of anti-corrosion protection is the use of film-forming coatings, which displace moisture from the gaps of structural joints, form a protective film, and also slow down the corrosion process. The protective properties of film-forming coatings are investigated by standard corrosion tests. At the same time, the specifics of aircraft structures and the possible side effects of the use of anti-corrosion compounds require special studies. The article presents an analysis of works in which the effect of film-forming anticorrosive compounds on the fatigue of elements of aircraft structures is considered.The main type of joints in the structure of modern aircraft are riveted joints. The high penetrating ability of film-forming materials ensures their penetration into the gaps of riveted joints, which, in some cases, can affect the frictional forces between the connected elements, which ensure the integrity of the joints. In some experimental investigations, the influence of film-forming compositions on the kinetics of fatigue crack growth is noted as a side effect. A number of possible mechanisms of deceleration and acceleration of the rate of crack propagation are considered. Experimental data concerning the effect of anticorrosive compounds on the fatigue of riveted joints and the process of propagation of fatigue cracks in structural materials, indicate the need to develop a universal methodology for the selection and use of film-forming compositions for the protection of aircraft structures from corrosion, taking into account the minimization or prevention of negative side effects on the service life of aircraft.