Fu-Min Li
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Fu-Min Li has a total of 165 co-authors. Here are the top co-authors by number of shared publications:
- Yu Chen
Shaanxi Normal University
34 shared publications Yu Ding
Key Laboratory of Macromolecular Science of Shaanxi Province, Key Laboratory of Applied Surface and Colloid Chemistry (Ministry of Education), Shaanxi Key Laboratory for Advanced Energy Devices, Shaanxi Engineering Lab for Advanced Energy Technology, School of Materials Science and Engineering, Shaanxi Normal University, Xi'an 710062, PR China
9 shared publicationsQi Xue
Shaanxi Key Laboratory for Advanced Energy Devices, School of Materials Science and Engineering, Shaanxi Normal University, Xi’an 710062, PR China
8 shared publications- Bao Yu Xia
Huazhong University of Science and Technology
7 shared publications - Shu-Ni Li
Shaanxi Normal University
6 shared publications Shuni Li
School of Chemistry and Chemical Engineering
6 shared publications
Latest Publications
- 4 September 2026
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 12 (36)
Sub-4-nm Pt 4 FeCoNiCu HEI nanocrystals via borophene-mediated co-anchoring for efficient and durable electrocatalysis
Pt-based intermetallic compounds with atomically ordered arrangements are highly promising catalysts for the oxygen reduction reaction (ORR) in proton exchange membrane fuel cells. However, the mutual constraint between high-temperature ordering and small-size stability (especially at high metal loadings), as well as the corrosion of both metal particles and carbon supports under operating conditions, severely limit their mass activity and long-term durability. Here, we report a borophene-mediated multimetal site co-anchoring strategy to synthesize sub-4-nanometer high-entropy Pt 4 FeCoNiCu intermetallic catalysts (MMCA-HEIMCs) supported on pristine carbon, which enables simultaneous anchoring of Pt and non-noble metals onto the carbon support. The strong metal-borophene interaction suppresses particle sintering during high temperature annealing (1000°C) and enables a high metal loading of 36 wt % at a small particle size. The resulting L1 0 -ordered structure with a unique FeCoNiCu atomic stacking configuration is confirmed by electron microscopy and x-ray absorption spectroscopy. The catalyst achieves an exceptional H 2 -air fuel cell peak power density of 1.055 watts per square centimeter and an ORR mass activity of 1.4 amperes per milligram of Pt at 0.9 volts in H 2 -O 2 fuel cells. Owing to the high-entropy stabilization effect and the robust borophene co-anchoring effect, the catalyst retains 72% of its peak power density and 80% of its initial mass activity after 30,000 durability cycles. Moreover, the borophene interlayer mitigates Pt-catalyzed carbon corrosion, as verified by a 5000 startup/shutdown cycling test and online mass spectrometry. This work demonstrates a general strategy to overcome the activity-durability trade-off in multicomponent intermetallic catalysts through strong metal-support interactions.
- 4 September 2026
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 12 (36)
Sub-4-nm Pt 4 FeCoNiCu HEI nanocrystals via borophene-mediated co-anchoring for efficient and durable electrocatalysis
Pt-based intermetallic compounds with atomically ordered arrangements are highly promising catalysts for the oxygen reduction reaction (ORR) in proton exchange membrane fuel cells. However, the mutual constraint between high-temperature ordering and small-size stability (especially at high metal loadings), as well as the corrosion of both metal particles and carbon supports under operating conditions, severely limit their mass activity and long-term durability. Here, we report a borophene-mediated multimetal site co-anchoring strategy to synthesize sub-4-nanometer high-entropy Pt 4 FeCoNiCu intermetallic catalysts (MMCA-HEIMCs) supported on pristine carbon, which enables simultaneous anchoring of Pt and non-noble metals onto the carbon support. The strong metal-borophene interaction suppresses particle sintering during high temperature annealing (1000°C) and enables a high metal loading of 36 wt % at a small particle size. The resulting L1 0 -ordered structure with a unique FeCoNiCu atomic stacking configuration is confirmed by electron microscopy and x-ray absorption spectroscopy. The catalyst achieves an exceptional H 2 -air fuel cell peak power density of 1.055 watts per square centimeter and an ORR mass activity of 1.4 amperes per milligram of Pt at 0.9 volts in H 2 -O 2 fuel cells. Owing to the high-entropy stabilization effect and the robust borophene co-anchoring effect, the catalyst retains 72% of its peak power density and 80% of its initial mass activity after 30,000 durability cycles. Moreover, the borophene interlayer mitigates Pt-catalyzed carbon corrosion, as verified by a 5000 startup/shutdown cycling test and online mass spectrometry. This work demonstrates a general strategy to overcome the activity-durability trade-off in multicomponent intermetallic catalysts through strong metal-support interactions.
- 23 April 2025
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 18 (10) , 4971-4981
Dual strain regulated RhNiAu trimetallene for efficient plasmonic-promoted acidic nitrate electroreduction
The nitrate electroreduction reaction (NO3ERR) under acidic conditions provides a green and sustainable pathway for acidic industrial wastewater treatment and ammonia (NH3) synthesis. As a typical multi-electron transfer and proton-coupled reaction, acidic NO3ERR is hindered by the competing hydrogen evolution reaction (HER) and intrinsically slow kinetics. Herein, we report a strategy to regulate the electronic structure of Rh by introducing coupled in-plane and out-of-plane compressive strain into RhNiAu trimetallene (RhNiAu-TML), thereby suppressing HER and accelerating NO3ERR kinetics. The surface Rh–Au single-atom alloy and subsurface Rh–Ni alloy impart a total compressive strain of 4.1% to RhNiAu-TML. The significantly compressed Rh atoms effectively decrease the formation of underpotentially deposited hydrogen to suppress the Volmer step of HER and reduce the adsorption energy of *NO intermediate to promote its hydrogenation during NO3ERR, resulting in improved NO3ERR performance with a high NH3 Faradaic efficiency of 97.9 ± 2%, a remarkable NH3 yield rate of 21.6 ± 0.35 mg h−1 mgcat −1 and outstanding stability for 120 h at +0.05 V versus reversible hydrogen electrode. Additionally, the Au nanocrystal anchored on RhNiAu-TML can result in plasmon-enhanced NO3ERR, which is further validated in the zinc–nitrate battery, achieving a power density of up to 22.1 mW cm−2 under light illumination.
- 23 April 2025
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 18 (10) , 4971-4981
Dual strain regulated RhNiAu trimetallene for efficient plasmonic-promoted acidic nitrate electroreduction
The nitrate electroreduction reaction (NO3ERR) under acidic conditions provides a green and sustainable pathway for acidic industrial wastewater treatment and ammonia (NH3) synthesis. As a typical multi-electron transfer and proton-coupled reaction, acidic NO3ERR is hindered by the competing hydrogen evolution reaction (HER) and intrinsically slow kinetics. Herein, we report a strategy to regulate the electronic structure of Rh by introducing coupled in-plane and out-of-plane compressive strain into RhNiAu trimetallene (RhNiAu-TML), thereby suppressing HER and accelerating NO3ERR kinetics. The surface Rh–Au single-atom alloy and subsurface Rh–Ni alloy impart a total compressive strain of 4.1% to RhNiAu-TML. The significantly compressed Rh atoms effectively decrease the formation of underpotentially deposited hydrogen to suppress the Volmer step of HER and reduce the adsorption energy of *NO intermediate to promote its hydrogenation during NO3ERR, resulting in improved NO3ERR performance with a high NH3 Faradaic efficiency of 97.9 ± 2%, a remarkable NH3 yield rate of 21.6 ± 0.35 mg h−1 mgcat −1 and outstanding stability for 120 h at +0.05 V versus reversible hydrogen electrode. Additionally, the Au nanocrystal anchored on RhNiAu-TML can result in plasmon-enhanced NO3ERR, which is further validated in the zinc–nitrate battery, achieving a power density of up to 22.1 mW cm−2 under light illumination.
- 11 November 2024
- Published by Springer Nature in Science China Chemistry
- Vol. 68 (5) , 1897-1905
The d-p orbital hybridization engineered RhPb bimetallene for efficient ethanol electrooxidation
- 11 November 2024
- Published by Springer Nature in Science China Chemistry
- Vol. 68 (5) , 1897-1905
The d-p orbital hybridization engineered RhPb bimetallene for efficient ethanol electrooxidation
- 30 July 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (32) , 22650-22660
Hydrogen Peroxide Spillover on Platinum–Iron Hybrid Electrocatalyst for Stable Oxygen Reduction
Iron-nitrogen-carbon (Fe-N-C) catalysts, although the most active platinum-free option for the cathodic oxygen reduction reaction (ORR), suffer from poor durability due to the Fe leaching and consequent Fenton effect, limiting their practical application in low-temperature fuel cells. This work demonstrates an integrated catalyst of a platinum-iron (PtFe) alloy planted in an Fe-N-C matrix (PtFe/Fe-N-C) to address this challenge. This novel catalyst exhibits both high-efficiency activity and stability, as evidenced by its impressive half-wave potential (E1/2) of 0.93 V versus reversible hydrogen electrode (vs RHE) and minimal 7 mV decay even after 50,000 potential cycles. Remarkably, it exhibits a very low hydrogen peroxide (H2O2) yield (0.07%) at 0.6 V and maintains this performance with negligible change after 10,000 potential cycles. Fuel cells assembled with this cathode PtFe/Fe-N-C catalyst show exceptional durability, with only 8 mV voltage loss at 0.8 A cm-2 after 30,000 cycles and ignorable current degradation at a voltage of 0.6 V over 85 h. Comprehensive in situ experiments and theoretical calculations reveal that oxygen species spillover from Fe-N-C to PtFe alloy not only inhibits H2O2 production but also eliminates harmful oxygenated radicals. This work paves the way for the design of highly efficient and stable ORR catalysts and has significant implications for the development of next-generation fuel cells.
- 30 July 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (32) , 22650-22660
Hydrogen Peroxide Spillover on Platinum–Iron Hybrid Electrocatalyst for Stable Oxygen Reduction
Iron-nitrogen-carbon (Fe-N-C) catalysts, although the most active platinum-free option for the cathodic oxygen reduction reaction (ORR), suffer from poor durability due to the Fe leaching and consequent Fenton effect, limiting their practical application in low-temperature fuel cells. This work demonstrates an integrated catalyst of a platinum-iron (PtFe) alloy planted in an Fe-N-C matrix (PtFe/Fe-N-C) to address this challenge. This novel catalyst exhibits both high-efficiency activity and stability, as evidenced by its impressive half-wave potential (E1/2) of 0.93 V versus reversible hydrogen electrode (vs RHE) and minimal 7 mV decay even after 50,000 potential cycles. Remarkably, it exhibits a very low hydrogen peroxide (H2O2) yield (0.07%) at 0.6 V and maintains this performance with negligible change after 10,000 potential cycles. Fuel cells assembled with this cathode PtFe/Fe-N-C catalyst show exceptional durability, with only 8 mV voltage loss at 0.8 A cm-2 after 30,000 cycles and ignorable current degradation at a voltage of 0.6 V over 85 h. Comprehensive in situ experiments and theoretical calculations reveal that oxygen species spillover from Fe-N-C to PtFe alloy not only inhibits H2O2 production but also eliminates harmful oxygenated radicals. This work paves the way for the design of highly efficient and stable ORR catalysts and has significant implications for the development of next-generation fuel cells.
- Top Cited Papers
- 11 July 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (29) , 20530-20538
Highly Selective Electrocatalytic CO2 Conversion to Tailored Products through Precise Regulation of Hydrogenation and C–C Coupling
The electrochemical reduction reaction of carbon dioxide (CO2RR) into valuable products offers notable economic benefits and contributes to environmental sustainability. However, precisely controlling the reaction pathways and selectively converting key intermediates pose considerable challenges. In this study, our theoretical calculations reveal that the active sites with different states of copper atoms (1-3-5-7-9) play a pivotal role in the adsorption behavior of the *CHO critical intermediate. This behavior dictates the subsequent hydrogenation and coupling steps, ultimately influencing the formation of the desired products. Consequently, we designed two model electrocatalysts comprising Cu single atoms and particles supported on CeO2. This design enables controlled *CHO intermediate transformation through either hydrogenation with *H or coupling with *CO, leading to a highly selective CO2RR. Notably, our selective control strategy tunes the Faradaic efficiency from 61.1% for ethylene (C2H4) to 61.2% for methane (CH4). Additionally, the catalyst demonstrated a high current density and remarkable stability, exceeding 500 h of operation. This work not only provides efficient catalysts for selective CO2RR but also offers valuable insights into tailoring surface chemistry and designing catalysts for precise control over catalytic processes to achieve targeted product generation in CO2RR technology.
- 11 July 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (29) , 20530-20538
Top Cited PapersHighly Selective Electrocatalytic CO2 Conversion to Tailored Products through Precise Regulation of Hydrogenation and C–C Coupling
The electrochemical reduction reaction of carbon dioxide (CO2RR) into valuable products offers notable economic benefits and contributes to environmental sustainability. However, precisely controlling the reaction pathways and selectively converting key intermediates pose considerable challenges. In this study, our theoretical calculations reveal that the active sites with different states of copper atoms (1-3-5-7-9) play a pivotal role in the adsorption behavior of the *CHO critical intermediate. This behavior dictates the subsequent hydrogenation and coupling steps, ultimately influencing the formation of the desired products. Consequently, we designed two model electrocatalysts comprising Cu single atoms and particles supported on CeO2. This design enables controlled *CHO intermediate transformation through either hydrogenation with *H or coupling with *CO, leading to a highly selective CO2RR. Notably, our selective control strategy tunes the Faradaic efficiency from 61.1% for ethylene (C2H4) to 61.2% for methane (CH4). Additionally, the catalyst demonstrated a high current density and remarkable stability, exceeding 500 h of operation. This work not only provides efficient catalysts for selective CO2RR but also offers valuable insights into tailoring surface chemistry and designing catalysts for precise control over catalytic processes to achieve targeted product generation in CO2RR technology.
- 22 May 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (22) , 15356-15365
Surface Redox Chemistry Regulates the Reaction Microenvironment for Efficient Hydrogen Peroxide Generation
Electrosynthesis has emerged as an enticing solution for hydrogen peroxide (H2O2) production. However, efficient H2O2 generation encounters challenges related to the robust gas-liquid-solid interface within electrochemical reactors. In this work, we introduce an effective hydrophobic coating modified by iron (Fe) sites to optimize the reaction microenvironment. This modification aims to mitigate radical corrosion through Fe(II)/Fe(III) redox chemistry, reinforcing the reaction microenvironment at the three-phase interface. Consequently, we achieved a remarkable yield of up to 336.1 mmol h-1 with sustained catalyst operation for an extensive duration of 230 h at 200 mA cm-2 without causing damage to the reaction interface. Additionally, the Faradaic efficiency of H2O2 exceeded 90% across a broad range of test current densities. This surface redox chemistry approach for manipulating the reaction microenvironment not only advances long-term H2O2 electrosynthesis but also holds promise for other gas-starvation electrochemical reactions.
- 22 May 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (22) , 15356-15365
Surface Redox Chemistry Regulates the Reaction Microenvironment for Efficient Hydrogen Peroxide Generation
Electrosynthesis has emerged as an enticing solution for hydrogen peroxide (H2O2) production. However, efficient H2O2 generation encounters challenges related to the robust gas-liquid-solid interface within electrochemical reactors. In this work, we introduce an effective hydrophobic coating modified by iron (Fe) sites to optimize the reaction microenvironment. This modification aims to mitigate radical corrosion through Fe(II)/Fe(III) redox chemistry, reinforcing the reaction microenvironment at the three-phase interface. Consequently, we achieved a remarkable yield of up to 336.1 mmol h-1 with sustained catalyst operation for an extensive duration of 230 h at 200 mA cm-2 without causing damage to the reaction interface. Additionally, the Faradaic efficiency of H2O2 exceeded 90% across a broad range of test current densities. This surface redox chemistry approach for manipulating the reaction microenvironment not only advances long-term H2O2 electrosynthesis but also holds promise for other gas-starvation electrochemical reactions.
- 6 February 2024
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 17 (6) , 2219-2227
Engineering low-coordination atoms on RhPt bimetallene for 12-electron ethanol electrooxidation
The three-dimensional perforated RhPt bimetallene achieves a high exposure ratio of low-coordinated RhPt diatomic sites, demonstrating excellent activity and remarkable selectivity for 12-electron ethanol oxidation to CO2.
- 6 February 2024
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 17 (6) , 2219-2227
Engineering low-coordination atoms on RhPt bimetallene for 12-electron ethanol electrooxidation
The three-dimensional perforated RhPt bimetallene achieves a high exposure ratio of low-coordinated RhPt diatomic sites, demonstrating excellent activity and remarkable selectivity for 12-electron ethanol oxidation to CO2.
- Top Cited Papers
- 26 July 2023
- Published by Royal Society of Chemistry (RSC) in Chemical Society Reviews
- Vol. 52 (16) , 5652-5683
Recent advances in proton exchange membrane water electrolysis
This review scrutinizes recent progress in PEMWE system including mechanisms, the correlation among structure-composition–performance, manufacturing, system design and operation protocols. The challenges and perspectives for applications are proposed.
- 26 July 2023
- Published by Royal Society of Chemistry (RSC) in Chemical Society Reviews
- Vol. 52 (16) , 5652-5683
Top Cited PapersRecent advances in proton exchange membrane water electrolysis
This review scrutinizes recent progress in PEMWE system including mechanisms, the correlation among structure-composition–performance, manufacturing, system design and operation protocols. The challenges and perspectives for applications are proposed.
- 10 April 2023
- Published by American Chemical Society (ACS) in Accounts of Materials Research
- Vol. 4 (5) , 427-437
Exploration and Insight of Dynamic Structure Evolution for Electrocatalysts
- 10 April 2023
- Published by American Chemical Society (ACS) in Accounts of Materials Research
- Vol. 4 (5) , 427-437
Exploration and Insight of Dynamic Structure Evolution for Electrocatalysts
- 1 January 2023
- Published by Lab Academic Press
- Vol. 1
Intermetallic PtTe metallene for formic acid oxidation assisted electrocatalytic nitrate reduction
Development of highly efficient electrocatalysts for selective electroreduction of nitrate is of great significance. In this work, the ultrathin intermetallic platinum-tellurium metallene (PtTe-ML) with atomic thickness is synthesized by simple liquid-phase chemical reduction. The introduction of Te atoms can sharply weaken the catalytic activity of Pt for the hydrogen evolution reaction. And, PtTe-ML exhibits superior catalytic activity for the nitrate reduction reaction (NO3−-ERR) than Pt black. In 0.5 M H2SO4 solution, PtTe-ML achieves an effective ammonia (NH3) production rate of 2.32 mg h−1 mgcat−1 and a Faradic efficiency of 95.5% at −0.04 V potential for NO3−-ERR. Meanwhile, the entry of Te atom isolates the continuous Pt active site and increases the proportion of the direct dehydrogenation pathway of the formic acid oxidation reaction (FAOR). Therefore, PtTe-ML also exhibits excellent FAOR activity due to the optimization of FAOR pathway. Then, anodic FAOR with low anodic oxidation potential is used to replace the oxygen evolution reaction with slow kinetic, so that the total electrolytic voltage of conventional electrochemical NH3 production can be effectively reduced. Consequently, the bifunctional PtTe-ML electrocatalyst requires only 0.4 V total voltage for FAOR assisted NH3 electroproduction. This work demonstrates a reaction coupling strategy to significantly improve the utilization rate of electric energy in electrochemical synthesis.
- 1 January 2023
- Published by Lab Academic Press
- Vol. 1
Intermetallic PtTe metallene for formic acid oxidation assisted electrocatalytic nitrate reduction
Development of highly efficient electrocatalysts for selective electroreduction of nitrate is of great significance. In this work, the ultrathin intermetallic platinum-tellurium metallene (PtTe-ML) with atomic thickness is synthesized by simple liquid-phase chemical reduction. The introduction of Te atoms can sharply weaken the catalytic activity of Pt for the hydrogen evolution reaction. And, PtTe-ML exhibits superior catalytic activity for the nitrate reduction reaction (NO3−-ERR) than Pt black. In 0.5 M H2SO4 solution, PtTe-ML achieves an effective ammonia (NH3) production rate of 2.32 mg h−1 mgcat−1 and a Faradic efficiency of 95.5% at −0.04 V potential for NO3−-ERR. Meanwhile, the entry of Te atom isolates the continuous Pt active site and increases the proportion of the direct dehydrogenation pathway of the formic acid oxidation reaction (FAOR). Therefore, PtTe-ML also exhibits excellent FAOR activity due to the optimization of FAOR pathway. Then, anodic FAOR with low anodic oxidation potential is used to replace the oxygen evolution reaction with slow kinetic, so that the total electrolytic voltage of conventional electrochemical NH3 production can be effectively reduced. Consequently, the bifunctional PtTe-ML electrocatalyst requires only 0.4 V total voltage for FAOR assisted NH3 electroproduction. This work demonstrates a reaction coupling strategy to significantly improve the utilization rate of electric energy in electrochemical synthesis.