LSLoka Subramanyam Sarma

Loka Subramanyam Sarma

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Loka Subramanyam Sarma has a total of 86 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Graphene oxide-supported CoSe2/NiSe2 heterostructures with Fe species for alkaline oxygen evolution

    by Kowlu Narayana Rao, Machireddy Narendra Reddy, Yellatur Chandra Sekhar, Loka Subramanyam Sarma

  • Comparative influence of graphene oxide and graphitic carbon nitride on NiMo-LDH electrocatalysts for alkaline urea oxidation

    by Machireddy Narendra Reddy, Yellatur Chandra Sekhar, Mopuri Vijaya Shiny, Kowlu Narayana Rao, Loka Subramanyam Sarma

  • Open Access

    Development of Green and Sustainable LC–MS Method for Trace-level Determination of N-Nitroso Vildagliptin in the DPP-4 Inhibitor Vildagliptin

    by Subramanyam Sarma Loka, Yerramreddy Srilatha, Sayyad Kousarali, Pravardhan Reddy Elala, Leela Prasad Kowtharapu, Ramakrishna Reddy N

    This study reports the development and validation of an efficient, green and sustainable liquid chromatography tandem mass spectrometry (LC-MS/MS) method for the detection and quantification of a potential nitrosated drug substance impurity N-Nitroso vildagliptin (NV) from vildagliptin (VG) API. The method is highly sensitive and selective for the determination of NV. Separations were achieved using Sunfire C18 column (150 mm × 4.6 mm, 3.5 µm) with gradient elution. Mobile phase A was 5.0 mM ammonium formate and mobile phase B was methanol. The flow rate was set at 0.6 mL/min. Quantitative data were acquired in multi reaction monitoring (MRM) mode to increase the selectivity and sensitivity of the bioanalytical method. Limit of detection (LOD) and limit of quantification (LOQ) were found to be 0.5 and 1.5 ng/mL which suggest that the method is highly sensitive. Accuracy estimates for LOQ spiked samples were within the range of 80%-120% and those for the 50, 100, and 150% spiked samples were within 85%-115%. The environmental impact of the current analytical procedure was assessed using four green analytical methods; AGREE metrics, Modified Green Analytical Procedure Index (MoGAPI), Analytical Eco-Scale and National Environmental Methods Index (NEMI). An Eco-Score of 79, a MoGAPI score of 72 and an AGREE score of 0.6 were obtained which implies that the analytical procedure is environmentally benign and performs very well. The developed and validated LC-MS/MS method is efficient for routine analysis of NV in VG pharmaceutical products due to its sensitivity and selectivity as well as being eco-friendly.

  • Open Access

    Comparative Influence of Graphene Oxide and Graphitic Carbon Nitride on NiMo-LDH Electrocatalysts for Alkaline Urea Oxidation

    by Machireddy Narendra Reddy, Y. Chandra Sekhar, Vijaya Shiny Mopuri, Narayana Rao Kowlu, Subramanyam Sarma Loka

    The urea oxidation reaction (UOR), when used in place of anodic oxygen evolution, can lower the voltage demand of alkaline electrolysis, although the multistep oxidation remains kinetically slow. This work explores capabilities of nickel-molybdenum layered double hydroxide (NiMo-LDH), NiMo-LDH/graphene oxide (NiMo-LDH/GO), and NiMo-LDH/graphitic carbon nitride (NiMo-LDH/g-C3N4) electrocatalysts prepared through a common hydrothermal route for UOR under matched conditions. Phase analysis showed retention of the parent LDH phase after support incorporation. Distinct support-dependent particle assemblies were observed, with NiMo-LDH/GO displaying rough, separated aggregates and crumpled sheet-like regions. Surface analysis of this material identified Ni(II), Mo(VI), graphenic carbon, and oxygenated-carbon environments. In 1.0 M KOH containing 0.33 M urea, NiMo-LDH/GO exhibited an apparent onset potential of 1.28 V versus the reversible hydrogen electrode and delivered an anodic current density of 103 mA cm-2 at 1.85 V. The corresponding values for NiMo-LDH/g-C3N4 and unsupported NiMo-LDH were 69 and 40 mA cm-2, respectively. NiMo-LDH/GO also gave the smallest Tafel slope (74.4 mV dec-1) and charge-transfer resistance (3.06 Ω) in the series. NiMo-LDH/GO showed a double-layer capacitance 4.21 and 10.2 times those of NiMo-LDH/g-C3N4 and NiMo-LDH, respectively, consistent with a more extensive electrolyte-accessible interface. Under the matched preparation and testing conditions, NiMo-LDH/GO combined the highest UOR response with the lowest interfacial resistance among the examined catalysts.

  • Analytical Method Development and Validation of N ‐Nitrosodibenzylamine in Lacosamide Drug Using LC–MS/MS Method: Quantification and Greenness Assessment

    by Murali Mohana Reddy Mavuluru, Kousrali Sayyad, Rathnakar Nathi, Janardhan Reddy Kanchani, Loka Subramanyam Sarma

    N ‐nitrosodibenzylamine (NDBzA), a potential nitrosamine impurity, is usually formed during the synthesis of lacosamide active pharmaceutical ingredient (API) at low concentrations. The present work focuses on the development of a sensitive and robust analytical method employing multiple reaction monitoring (MRM) for the quantitative determination of NDBzA in the lacosamide API. A Zorbax SB‐Phenyl column (250 × 4.6 mm 2 , 5 µm) under gradient elution conditions was used for the separation of lacosamide and NDBzA. Overall, 0.1% formic acid in water was used as mobile phase‐A and 100% methanol was used as mobile phase‐B, with a flow rate maintained at 0.8 mL/min with gradient program. The gradient elution process consists of these steps: (Time in minutes/% mobile phase‐B) 0.01/40, 3.0/40, 10.0/90, 15.0/90, 15.1/40, and 21.0/40. An MRM approach was utilized for the quantification of NDBzA with a precursor‐to‐product ion transition of m / z 227 → 91.2 at a collision energy of −10.0 eV. From the quantification method developed here, the limit of detection (LOD) and limit of quantification (LOQ) for the NDBzA impurity were found to be 0.034 and 0.113 ppb, respectively. Further, accuracy results were within the acceptable range (70%–130%). The developed liquid chromatography coupled with mass spectrometry (LC–MS/MS) method is validated for good linearity, precision, accuracy, and suitability for the quantification of NDBzA in the lacosamide API. Furthermore, the environmental impact of the developed method was systematically evaluated using several greenness assessment tools, including AGREE (Analytical Greenness), NEMI (National Environmental Methods Index), MoGAPI (Modified Green Analytical Procedure Index), and the Analytical Eco‐Scale. The method achieved scores of 0.62 (AGREE), 76 (MoGAPI), and 83 (Eco‐Scale), indicating that it is environmentally friendly. The sustainability and environmental performance were quantitatively assessed using these standardized tools, confirming the improved eco‐efficiency of the method.


  • Open Access

    A Sustainable LC–MS Method for Determination of Genotoxic Impurity 1-(2-chloroacetyl)pyrrolidine-2-carboxamide (CAPCA): Assessment by Advanced Green Analytical Metrics

    by Murali Mohana Reddy Mavuluru, Sayyad Kousarali, Pravardhan Reddy Elala, Leela Prasad Kowtharapu, Janardhan Reddy Kanchani, Subramanyam Sarma Loka

    This study details the process of creating and testing a sensitive and selective LC-MS/MS method that can detect and quantify the possible genotoxic impurity 1-(2-chloroacetyl)pyrrolidine-2-carboxamide (CAPCA) in Vildagliptin active pharmaceutical ingredient (API). CAPCA is an unwanted byproduct of the vildagliptin production process that has the ability to interact with DNA and produce genotoxic consequences due to its electrophilic functional group. This makes it a possible regulatory issue. The Hypersil BDS C18 column (250 mm × 4.6 mm, 5 µm) was used for chromatographic separation with isocratic elution. The mobile phases A and B were 0.1% formic acid in water and methanol, respectively, and the flow rate was 0.8 mL/min. To make sure the quantitative analysis was more sensitive and selective, it was run in multiple reaction monitoring (MRM) mode. With a limit of detection (LOD) of 0.5 ng/mL and a limit of quantification (LOQ) of 1.5 ng/mL, the created technique demonstrated remarkable sensitivity. Conforming to the acceptance criteria outlined by International Council of Harmonization (ICH) and United States Pharmacopeia (USP) standards, the method was determined to have an accuracy range of 70-130%. The analytical procedure's environmental sustainability was further investigated utilizing four green analytical evaluation tools: the AGREE metrics, the Modified Green Analytical Procedure Index (MoGAPI), the Analytical Eco-Scale, and the National Environmental Methods Index (NEMI). An Eco-Scale score of 67 and an AGREE score of 0.62 showed that the procedure was environmentally friendly and performed adequately. The validated LC-MS/MS approach is well-suited for regular monitoring of CAPCA in Vildagliptin pharmacological compounds due to its high sensitivity, specificity, and ecologically sustainable profile.

  • Ethylene glycol electrooxidation on Pt–Pd nanoparticles supported on reduced graphene oxide in acidic medium

    by Kadiri Chennammagari Vikram, Machireddy Narendra Reddy, Mopuri Vijaya Shiny, Somala Adinarayana Reddy, Loka Subramanyam Sarma


  • The Pd‐Co/rGO Catalyzed Buchwald–Hartwig Amination of N ‐Protected‐5‐Bromoindoles: A Green Approach to Functionalized Indoles With Photophysical Insights

    by Vadla Bhagyalakshmi, Loka Subramanyam Sarma, Pranshu K. Gupta, Kalluri V. S. Ranganath, Derangula Venkateswarlu, Cirandur Suresh Reddy, Peddiahgari Vasu Govardhana Reddy

    To develop sustainable catalysts for C─N bond‐forming reactions, a series of Pd‐Co bimetallic alloy nanocatalysts supported on reduced graphene oxide (Pd‐Co@rGO) were synthesized. The synthesis utilized a clean chemical reduction method employing the environmentally friendly reagent ascorbic acid. Varying the starting material ratios allowed the preparation of catalysts with different metal weight percentages (wt% Pd and Co), facilitating the optimization of catalytic performance. Characterization (XRD, SEM, HR‐TEM, and AFM) confirmed the material's architecture. The Pd‐Co@rGO catalyst achieves high efficiency due to the synergistic electronic and geometric enhancement from the Co‐Pd alloying and the rGO support, which ensures uniform dispersion and optimal surface area. This robust and highly efficient platform successfully promoted the Buchwald–Hartwig amination of N ‐protected‐5‐bromoindole derivatives with a variety of primary (including heteroaryl) and secondary amines, affording the corresponding N ‐protected‐5‐amino‐1 H‐ indoles in good to excellent yields. The photophysical properties of the title compounds ( 5a–p ) were investigated in a chloroform solution at a concentration of 1 × 10 − 5 mol L −1 . Among all synthesized compounds, the N ‐benzyl, biphenylbenzyl, naphthyl, and nitro‐substituted indole derivatives ( 5c , 5e , and 5j ) exhibited the most intense absorption and emission maxima.

  • Development of reduced graphene oxide (rGO)-supported Ni–Fe and Ni–Co mixed metal oxide nanocomposites as electrocatalysts for oxygen evolution reaction in alkaline medium

    by Narayana Rao Kowlu, Narendra Reddy Machireddy, Vijaya Shiny Mopuri, Chandra Sekhar Yellatur, Loka Subramanyam Sarma

    The fabrication of highly active and affordable electrocatalysts for the oxygen evolution reaction (OER) and the hydrogen evolution reaction is crucial to realizing overall water splitting for clean energy applications. In this work, we developed different mixed metal oxides/reduced graphene oxide (Fe 2 O 3 /NiO/rGO and Co 3 O 4 /NiO/rGO) nanocomposites by a one-pot synthesis strategy followed by a thermal treatment as low-cost alternatives to noble-metal-based benchmark catalysts available for OER. The structural features, elemental compositions, and electrocatalytic properties of Fe 2 O 3 /NiO/rGO and Co 3 O 4 /NiO/rGO nanocomposites were investigated through x-ray diffraction, field-emission scanning electron microscopy, energy dispersive spectroscopy, and electrochemical techniques. The results from linear sweep voltammetry conducted in alkaline conditions show that the Fe 2 O 3 /NiO/rGO nanocomposite needs 1.82 V versus reversible hydrogen electrode (RHE) to drive a current density of 50 mA cm −2 . This is lower than that of benchmark RuO 2 (1.86 V versus RHE), signifying better OER performance of the Fe 2 O 3 /NiO/rGO nanocomposite. In contrast, Co 3 O 4 /NiO/rGO requires much higher potential exceeding 2.0 V versus RHE compared to benchmark RuO 2 to achieve 50 mA cm −2 . The facile synthesis strategy demonstrated here is promising for developing highly efficient OER electrocatalysts.


  • Enhancement of biomass and bioethanol production using Chlorococcum minutum with the assistance of nano-MnO2

    by P. Gnaneswari, B. Sourya Swetha, K. Riazunnisa, V. Anu Prasanna, M. Rajasekhar, E.C. Surendranatha Reddy, M. Narendra Reddy, L. Subramanyam Sarma, T. Chandrasekhar