Youxi Zhao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Youxi Zhao has a total of 44 co-authors. Here are the top co-authors by number of shared publications:
- Zhiming Rao
Jiangnan University
4 shared publications - Meijuan Xu
The Key Laboratory of Industrial Biotechnology, Ministry of Education, School of Biotechnology, Jiangnan University, Wuxi 214122, China
3 shared publications - Taowei Yang
Key Laboratory of Industrial Biotechnology, Ministry of Education, School of Biotechnology, Jiangnan University, Wuxi, China
3 shared publications - Xian Zhang
Jiangnan University
3 shared publications - Manchi Zhu
The Key Laboratory of Industrial Biotechnology, Ministry of Education, School of Biotechnology, Jiangnan University, Wuxi, China
2 shared publications - Minglong Shao
Key Laboratory of Industrial Biotechnology of the Ministry of Education, Laboratory of Applied Microorganisms and Metabolic Engineering, School of Biotechnology, Jiangnan University, Wuxi 214122, China; Institute of Future Food Technology, JITRI, Yixing 214200, China
2 shared publications
Latest Publications
- Open Access
Identification and Characterization of a Polyethylene-Degrading Fungus Aspergillus sydowii Isolated from Soils of Waste Disposal Sites
Petrochemical-based plastics are widely used due to their convenience and low cost, with polyethylene (PE) being the most produced globally. However, the lack of efficient and sustainable treatment methods for conventional plastic wastes has led to severe environmental pollution. A new fungus strain capable of degrading PE was isolated from soil samples collected at a waste disposal site in Henan province and identified as Aspergillus sydowii W144. After 30 days of incubation under solid-state culture conditions, the strain demonstrated significant oxidative depolymerization of low-density polyethylene (LDPE). FTIR results revealed a substantial increase in the carbonyl index of the LDPE film, while differential scanning calorimetry (DSC) analysis detected an enhanced crystallinity in the LDPE film. Notably, distinct pitting and erosion marks were observed on the surface of LDPE film using scanning electron microscopy (SEM). Quantitative analysis showed a weight loss rate of 6.39% and a reduction in Weight-Average Molecular Weight (Mw) by 50.93%. Among currently identified PE-degrading strains polyethylene, A. sydowii W144 exhibits particularly outstanding depolymerization efficiency, especially on untreated PE. Based on the whole-genome data of A. sydowii W144, a preliminary model of the putative polyethylene degradation pathway in A. sydowii W144 was constructed through homology-based sequence analysis and by referencing previously reported polyethylene degradation pathways. Laccase/multicopper oxidase plays a key role in the initial oxidation of PE. Heterologous expression of the candidate gene laccase4 in Pichia pastoris yielded an active enzyme (~56 kDa) with a laccase activity of 460 U/L, confirming its functionality. This study provides a novel microbial resource and potential enzymatic tools for PE biodegradation. The strain exhibits a promising application in complex ecosystems for PE pollution. IMPORTANCE: The polyethylene-degrading strain A. sydowii W144 isolated in this study exhibits highly efficient depolymerization capabilities, particularly under solid-state culture conditions. Genomic sequencing analysis enabled the construction of a potential polyethylene (PE) degradation pathway and facilitated the identification of key laccase and multicopper oxidase genes involved in this process. The isolation of this novel strain enriches the microbial resources available for PE waste treatment and offers new insights into the mechanisms of plastic biodegradation.
Open AccessIdentification and Characterization of a Polyethylene-Degrading Fungus Aspergillus sydowii Isolated from Soils of Waste Disposal Sites
Petrochemical-based plastics are widely used due to their convenience and low cost, with polyethylene (PE) being the most produced globally. However, the lack of efficient and sustainable treatment methods for conventional plastic wastes has led to severe environmental pollution. A new fungus strain capable of degrading PE was isolated from soil samples collected at a waste disposal site in Henan province and identified as Aspergillus sydowii W144. After 30 days of incubation under solid-state culture conditions, the strain demonstrated significant oxidative depolymerization of low-density polyethylene (LDPE). FTIR results revealed a substantial increase in the carbonyl index of the LDPE film, while differential scanning calorimetry (DSC) analysis detected an enhanced crystallinity in the LDPE film. Notably, distinct pitting and erosion marks were observed on the surface of LDPE film using scanning electron microscopy (SEM). Quantitative analysis showed a weight loss rate of 6.39% and a reduction in Weight-Average Molecular Weight (Mw) by 50.93%. Among currently identified PE-degrading strains polyethylene, A. sydowii W144 exhibits particularly outstanding depolymerization efficiency, especially on untreated PE. Based on the whole-genome data of A. sydowii W144, a preliminary model of the putative polyethylene degradation pathway in A. sydowii W144 was constructed through homology-based sequence analysis and by referencing previously reported polyethylene degradation pathways. Laccase/multicopper oxidase plays a key role in the initial oxidation of PE. Heterologous expression of the candidate gene laccase4 in Pichia pastoris yielded an active enzyme (~56 kDa) with a laccase activity of 460 U/L, confirming its functionality. This study provides a novel microbial resource and potential enzymatic tools for PE biodegradation. The strain exhibits a promising application in complex ecosystems for PE pollution. IMPORTANCE: The polyethylene-degrading strain A. sydowii W144 isolated in this study exhibits highly efficient depolymerization capabilities, particularly under solid-state culture conditions. Genomic sequencing analysis enabled the construction of a potential polyethylene (PE) degradation pathway and facilitated the identification of key laccase and multicopper oxidase genes involved in this process. The isolation of this novel strain enriches the microbial resources available for PE waste treatment and offers new insights into the mechanisms of plastic biodegradation.
- Open Access
- 26 March 2026
- Published by MDPI AG in Preprints.org
Identification and Characterization of a Polyethylene-Degrading Fungus Aspergillus sydowii Isolated from Soils of Waste Disposal Sites
Petrochemical-based plastics are widely used due to their convenience and low cost, with polyethylene (PE) being the most produced globally. However, the lack of efficient and sustainable treatment methods for conventional plastic wastes has led to severe environmental pollution. A new fungus strain capable of degrading PE was isolated from soil samples collected at a waste disposal site in Henan province and identified as Aspergillus sydowii W144. After 30 days of incubation under solid-state culture conditions, the strain demonstrated significant depolymerization and degradation of low-density polyethylene (LDPE). FTIR results revealed a substantial increase in the carbonyl index of the LDPE film, while differential scanning calorimetry (DSC) analysis detected an enhanced crystallinity in the LDPE film. Notably, distinct pitting and erosion marks was observed on the surface of LDPE film by scanning electron microscopy (SEM). Quantitative analysis showed a weight loss rate of 6.39% and a reduction in Weight-Average Molecular Weight (Mw) by 50.93%. Among currently identified PE-degrading strains polyethylene, A. Sydowii W144 exhibits particularly outstanding degradation efficiency, especially on untreated PE. Based on the whole-genome data of A. sydowii W144, a preliminary model of the putative polyethylene degradation pathway in A. sydowii W144 was constructed through homology-based sequence analysis and by referencing previously reported polyethylene degradation pathways. Laccase/multicopper oxidases plays a key role in the initial oxidation of PE. Heterologous expression of the candidate gene laccase4 in Pichia pastoris yielded an active enzyme (~56 kDa) with a laccase activity of 460 U/L, confirming its functionality. This study provides a novel microbial resource and potential enzymatic tools for PE biodegradation. The strain exhibits a promising application in complex ecosystems for PE pollution. IMPORTANCE: The polyethylene-degrading strain A. sydowii W144 isolated in this study exhibits highly efficient degradation capabilities, particularly under solid-state culture conditions. Genomic sequencing analysis enabled the construction of a potential polyethylene (PE) degradation pathway and facilitated the identification of key laccase and polyphenol oxidase genes involved in this process. he isolation of this novel strain enriches the microbial resources available for PE waste treatment and offers new insights into the mechanisms of plastic biodegradation.
- 26 March 2026
- Published by MDPI AG in Preprints.org
Open AccessIdentification and Characterization of a Polyethylene-Degrading Fungus Aspergillus sydowii Isolated from Soils of Waste Disposal Sites
Petrochemical-based plastics are widely used due to their convenience and low cost, with polyethylene (PE) being the most produced globally. However, the lack of efficient and sustainable treatment methods for conventional plastic wastes has led to severe environmental pollution. A new fungus strain capable of degrading PE was isolated from soil samples collected at a waste disposal site in Henan province and identified as Aspergillus sydowii W144. After 30 days of incubation under solid-state culture conditions, the strain demonstrated significant depolymerization and degradation of low-density polyethylene (LDPE). FTIR results revealed a substantial increase in the carbonyl index of the LDPE film, while differential scanning calorimetry (DSC) analysis detected an enhanced crystallinity in the LDPE film. Notably, distinct pitting and erosion marks was observed on the surface of LDPE film by scanning electron microscopy (SEM). Quantitative analysis showed a weight loss rate of 6.39% and a reduction in Weight-Average Molecular Weight (Mw) by 50.93%. Among currently identified PE-degrading strains polyethylene, A. Sydowii W144 exhibits particularly outstanding degradation efficiency, especially on untreated PE. Based on the whole-genome data of A. sydowii W144, a preliminary model of the putative polyethylene degradation pathway in A. sydowii W144 was constructed through homology-based sequence analysis and by referencing previously reported polyethylene degradation pathways. Laccase/multicopper oxidases plays a key role in the initial oxidation of PE. Heterologous expression of the candidate gene laccase4 in Pichia pastoris yielded an active enzyme (~56 kDa) with a laccase activity of 460 U/L, confirming its functionality. This study provides a novel microbial resource and potential enzymatic tools for PE biodegradation. The strain exhibits a promising application in complex ecosystems for PE pollution. IMPORTANCE: The polyethylene-degrading strain A. sydowii W144 isolated in this study exhibits highly efficient degradation capabilities, particularly under solid-state culture conditions. Genomic sequencing analysis enabled the construction of a potential polyethylene (PE) degradation pathway and facilitated the identification of key laccase and polyphenol oxidase genes involved in this process. he isolation of this novel strain enriches the microbial resources available for PE waste treatment and offers new insights into the mechanisms of plastic biodegradation.
- Open Access
- 7 October 2025
- Published by American Society for Microbiology in Microbiology Spectrum
- Vol. 13 (10) , e0335624
Characterization of Pseudomonas stutzeri strain AY4 with nitrogen removal and application in wastewater treatment
A new strain capable of removing ammonium and nitrate nitrogen from animal farm wastewater was isolated and identified as Pseudomonas stutzeri strain AY4. Nitrogen balance analysis showed 52.9% and 63.2% of NH 4 + -N and NO 3 − -N conversion to gaseous nitrogen, respectively, in laboratory conditions. Strain AY4 was also able to remove 92.7%, 95.8%, and 91.4% of total nitrogen, NH 4 + -N, and NO 3 − -N in the real farm wastewater, which was significantly greater than that of the uninoculated control group. The quantitative real-time PCR experiment showed that the transcript levels of glnA , glnE , amtB , napA , narI , nirB , and nirD genes related to nitrogen metabolism were significantly upregulated during wastewater treatment. Strain AY4 showed high potential working in low carbon-to-nitrogen ratio and wide range of temperature adaptability, which makes it suitable for wastewater treatment in various environmental conditions. In addition, the study of transcript levels of genes related to nitrogen metabolism is important for revealing the mechanism of action of P. stutzeri in wastewater treatment. IMPORTANCE: The heterotrophic nitrifying-aerobic denitrifying bacterium Pseudomonas stutzeri strain AY4, isolated in this study, simultaneously removed ammonium nitrogen and nitrate nitrogen from wastewater. Upregulation of the transcript levels of glnA , glnE , amtB , napA , narI , nirB , and nirD genes associated with nitrogen metabolism favored the removal of nitrogen from actual wastewater. The isolation of novel strains with nitrogen removal ability has positively contributed to the treatment of nitrogen-containing farm wastewater.
- 7 October 2025
- Published by American Society for Microbiology in Microbiology Spectrum
- Vol. 13 (10) , e0335624
Open AccessCharacterization of Pseudomonas stutzeri strain AY4 with nitrogen removal and application in wastewater treatment
A new strain capable of removing ammonium and nitrate nitrogen from animal farm wastewater was isolated and identified as Pseudomonas stutzeri strain AY4. Nitrogen balance analysis showed 52.9% and 63.2% of NH 4 + -N and NO 3 − -N conversion to gaseous nitrogen, respectively, in laboratory conditions. Strain AY4 was also able to remove 92.7%, 95.8%, and 91.4% of total nitrogen, NH 4 + -N, and NO 3 − -N in the real farm wastewater, which was significantly greater than that of the uninoculated control group. The quantitative real-time PCR experiment showed that the transcript levels of glnA , glnE , amtB , napA , narI , nirB , and nirD genes related to nitrogen metabolism were significantly upregulated during wastewater treatment. Strain AY4 showed high potential working in low carbon-to-nitrogen ratio and wide range of temperature adaptability, which makes it suitable for wastewater treatment in various environmental conditions. In addition, the study of transcript levels of genes related to nitrogen metabolism is important for revealing the mechanism of action of P. stutzeri in wastewater treatment. IMPORTANCE: The heterotrophic nitrifying-aerobic denitrifying bacterium Pseudomonas stutzeri strain AY4, isolated in this study, simultaneously removed ammonium nitrogen and nitrate nitrogen from wastewater. Upregulation of the transcript levels of glnA , glnE , amtB , napA , narI , nirB , and nirD genes associated with nitrogen metabolism favored the removal of nitrogen from actual wastewater. The isolation of novel strains with nitrogen removal ability has positively contributed to the treatment of nitrogen-containing farm wastewater.
- 12 November 2024
- Published by Elsevier in Bioresource Technology
- Vol. 416, 131802
Multi-module engineering to guide the development of an efficient L-threonine-producing cell factory
- 12 November 2024
- Published by Elsevier in Bioresource Technology
- Vol. 416, 131802
Multi-module engineering to guide the development of an efficient L-threonine-producing cell factory
- Open Access
- 30 July 2022
- Published by MDPI AG in Fermentation
- Vol. 8 (8) , 366
Lignin Biodegradation and Its Valorization
Lignin, a rigid polymer composed of phenolic subunits with high molecular weight and complex structure, ranks behind only cellulose in the contribution to the biomass of plants. Therefore, lignin can be used as a new environmentally friendly resource for the industrial production of a variety of polymers, dyes and adhesives. Since laccase was found to be able to degrade lignin, increasing attention had been paid to the valorization of lignin. Research has mainly focused on the identification of lignin-degrading enzymes, which play a key role in lignin biodegradation, and the potential application of lignin degradation products. In this review, we describe the source, catalytic specificity and enzyme reaction mechanism of the four classes of the lignin-degrading enzymes so far discovered. In addition, the major pathways of lignin biodegradation and the applications of the degradative products are also discussed. Lignin-degrading bacteria or enzymes can be used in combination with chemical pretreatment for the production of value-added chemicals from lignin, providing a promising strategy for lignin valorization.
- 30 July 2022
- Published by MDPI AG in Fermentation
- Vol. 8 (8) , 366
Open AccessLignin Biodegradation and Its Valorization
Lignin, a rigid polymer composed of phenolic subunits with high molecular weight and complex structure, ranks behind only cellulose in the contribution to the biomass of plants. Therefore, lignin can be used as a new environmentally friendly resource for the industrial production of a variety of polymers, dyes and adhesives. Since laccase was found to be able to degrade lignin, increasing attention had been paid to the valorization of lignin. Research has mainly focused on the identification of lignin-degrading enzymes, which play a key role in lignin biodegradation, and the potential application of lignin degradation products. In this review, we describe the source, catalytic specificity and enzyme reaction mechanism of the four classes of the lignin-degrading enzymes so far discovered. In addition, the major pathways of lignin biodegradation and the applications of the degradative products are also discussed. Lignin-degrading bacteria or enzymes can be used in combination with chemical pretreatment for the production of value-added chemicals from lignin, providing a promising strategy for lignin valorization.
- Open Access
- 7 August 2020
- Published by MDPI AG in Marine Drugs
- Vol. 18 (8) , 415
Anti-Tumor Effects of Astaxanthin by Inhibition of the Expression of STAT3 in Prostate Cancer
Astaxanthin is a natural product gaining increasing attention due to its safety and anti-cancer properties. In this study, we investigated the mechanisms of the anti-cancer effects of astaxanthin on prostate cancer (PCa) cell lines using aggressive PCa DU145 cells. Also an instantaneous silenced cell line (si-STAT3) derived from DU145 and a control cell line (si-NK) were used for the MTT and colony formation assays to determine the role of astaxanthin in proliferation and colony formation abilities. Flow cytometry assays were used to detect the apoptosis of tumor cells. Migration and invasion assays detected the weakening of the respective abilities. Western blot and RT-PCR tests detected the levels of STAT3 protein and mRNA. Astaxanthin resulted in suppression of the proliferation of DU145 cells and the level of STAT3. The treatment of DU145 cells with astaxanthin decreased the cloning ability, increased the apoptosis percentage and weakened the abilities of migration and invasion of the cells. Furthermore, astaxanthin reduced the expression of STAT3 at protein and mRNA levels. The effects were enhanced when astaxanthin and si-STAT3 were combined. The results of animal experiments were consistent with the results in cells. Thus, astaxanthin inhibits the proliferation of DU145 cells by reducing the expression of STAT3.
- 7 August 2020
- Published by MDPI AG in Marine Drugs
- Vol. 18 (8) , 415
Open AccessAnti-Tumor Effects of Astaxanthin by Inhibition of the Expression of STAT3 in Prostate Cancer
Astaxanthin is a natural product gaining increasing attention due to its safety and anti-cancer properties. In this study, we investigated the mechanisms of the anti-cancer effects of astaxanthin on prostate cancer (PCa) cell lines using aggressive PCa DU145 cells. Also an instantaneous silenced cell line (si-STAT3) derived from DU145 and a control cell line (si-NK) were used for the MTT and colony formation assays to determine the role of astaxanthin in proliferation and colony formation abilities. Flow cytometry assays were used to detect the apoptosis of tumor cells. Migration and invasion assays detected the weakening of the respective abilities. Western blot and RT-PCR tests detected the levels of STAT3 protein and mRNA. Astaxanthin resulted in suppression of the proliferation of DU145 cells and the level of STAT3. The treatment of DU145 cells with astaxanthin decreased the cloning ability, increased the apoptosis percentage and weakened the abilities of migration and invasion of the cells. Furthermore, astaxanthin reduced the expression of STAT3 at protein and mRNA levels. The effects were enhanced when astaxanthin and si-STAT3 were combined. The results of animal experiments were consistent with the results in cells. Thus, astaxanthin inhibits the proliferation of DU145 cells by reducing the expression of STAT3.
- Open Access
Intracellular Environment Improvement of Mycobacterium neoaurum for Enhancing Androst-1,4-Diene-3,17-Dione Production by Manipulating NADH and Reactive Oxygen Species Levels
As one of the most significant steroid hormone precursors, androst-1,4-diene-3,17-dione (ADD) could be used to synthesize many valuable hormone drugs. The microbial transformation of sterols to ADD has received extensive attention in recent years. In a previous study, Mycobacterium neoaurum JC-12 was isolated and converted sterols to the major product, ADD. In this work, we enhanced ADD yield by improving the cell intracellular environment. First, we introduced a nicotinamide adenine dinucleotide (NADH) oxidase from Bacillus subtilis to balance the intracellular NAD+ availability in order to strengthen the ADD yield. Then, the catalase gene from M. neoaurum was also over-expressed to simultaneously scavenge the generated H2O2 and eliminate its toxic effects on cell growth and sterol transformation. Finally, using a 5 L fermentor, the recombinant strain JC-12yodC-katA produced 9.66 g/L ADD, which increased by 80% when compared with the parent strain. This work shows a promising way to increase the sterol transformation efficiency by regulating the intracellular environment.
Open AccessIntracellular Environment Improvement of Mycobacterium neoaurum for Enhancing Androst-1,4-Diene-3,17-Dione Production by Manipulating NADH and Reactive Oxygen Species Levels
As one of the most significant steroid hormone precursors, androst-1,4-diene-3,17-dione (ADD) could be used to synthesize many valuable hormone drugs. The microbial transformation of sterols to ADD has received extensive attention in recent years. In a previous study, Mycobacterium neoaurum JC-12 was isolated and converted sterols to the major product, ADD. In this work, we enhanced ADD yield by improving the cell intracellular environment. First, we introduced a nicotinamide adenine dinucleotide (NADH) oxidase from Bacillus subtilis to balance the intracellular NAD+ availability in order to strengthen the ADD yield. Then, the catalase gene from M. neoaurum was also over-expressed to simultaneously scavenge the generated H2O2 and eliminate its toxic effects on cell growth and sterol transformation. Finally, using a 5 L fermentor, the recombinant strain JC-12yodC-katA produced 9.66 g/L ADD, which increased by 80% when compared with the parent strain. This work shows a promising way to increase the sterol transformation efficiency by regulating the intracellular environment.
- Open Access
- 6 August 2019
- Published by Springer Nature in Microbial Cell Factories
- Vol. 18 (1) , 1-12
Synthetic engineering of Corynebacterium crenatum to selectively produce acetoin or 2,3-butanediol by one step bioconversion method
Acetoin (AC) and 2,3-butanediol (2,3-BD) as highly promising bio-based platform chemicals have received more attentions due to their wide range of applications. However, the non-efficient substrate conversion and mutually transition between AC and 2,3-BD in their natural producing strains not only led to a low selectivity but also increase the difficulty of downstream purification. Therefore, synthetic engineering of more suitable strains should be a reliable strategy to selectively produce AC and 2,3-BD, respectively. In this study, the respective AC (alsS and alsD) and 2,3-BD biosynthesis pathway genes (alsS, alsD, and bdhA) derived from Bacillus subtilis 168 were successfully expressed in non-natural AC and 2,3-BD producing Corynebacterium crenatum, and generated recombinant strains, C. crenatum SD and C. crenatum SDA, were proved to produce 9.86 g L−1 of AC and 17.08 g L−1 of 2,3-BD, respectively. To further increase AC and 2,3-BD selectivity, the AC reducing gene (butA) and lactic acid dehydrogenase gene (ldh) in C. crenatum were then deleted. Finally, C. crenatumΔbutAΔldh SD produced 76.93 g L−1 AC in one-step biocatalysis with the yield of 0.67 mol mol−1. Meanwhile, after eliminating the lactic acid production and enhancing 2,3-butanediol dehydrogenase activity, C. crenatumΔldh SDA synthesized 88.83 g L−1 of 2,3-BD with the yield of 0.80 mol mol−1. The synthetically engineered C. crenatumΔbutAΔldh SD and C. crenatumΔldh SDA in this study were proved as an efficient microbial cell factory for selective AC and 2,3-BD production. Based on the insights from this study, further synthetic engineering of C. crenatum for AC and 2,3-BD production is suggested.
- 6 August 2019
- Published by Springer Nature in Microbial Cell Factories
- Vol. 18 (1) , 1-12
Open AccessSynthetic engineering of Corynebacterium crenatum to selectively produce acetoin or 2,3-butanediol by one step bioconversion method
Acetoin (AC) and 2,3-butanediol (2,3-BD) as highly promising bio-based platform chemicals have received more attentions due to their wide range of applications. However, the non-efficient substrate conversion and mutually transition between AC and 2,3-BD in their natural producing strains not only led to a low selectivity but also increase the difficulty of downstream purification. Therefore, synthetic engineering of more suitable strains should be a reliable strategy to selectively produce AC and 2,3-BD, respectively. In this study, the respective AC (alsS and alsD) and 2,3-BD biosynthesis pathway genes (alsS, alsD, and bdhA) derived from Bacillus subtilis 168 were successfully expressed in non-natural AC and 2,3-BD producing Corynebacterium crenatum, and generated recombinant strains, C. crenatum SD and C. crenatum SDA, were proved to produce 9.86 g L−1 of AC and 17.08 g L−1 of 2,3-BD, respectively. To further increase AC and 2,3-BD selectivity, the AC reducing gene (butA) and lactic acid dehydrogenase gene (ldh) in C. crenatum were then deleted. Finally, C. crenatumΔbutAΔldh SD produced 76.93 g L−1 AC in one-step biocatalysis with the yield of 0.67 mol mol−1. Meanwhile, after eliminating the lactic acid production and enhancing 2,3-butanediol dehydrogenase activity, C. crenatumΔldh SDA synthesized 88.83 g L−1 of 2,3-BD with the yield of 0.80 mol mol−1. The synthetically engineered C. crenatumΔbutAΔldh SD and C. crenatumΔldh SDA in this study were proved as an efficient microbial cell factory for selective AC and 2,3-BD production. Based on the insights from this study, further synthetic engineering of C. crenatum for AC and 2,3-BD production is suggested.
- Open Access
A Novel 3-Phytosterone-9α-Hydroxylase Oxygenation Component and Its Application in Bioconversion of 4-Androstene-3,17-Dione to 9α-Hydroxy-4-Androstene-3,17-Dione Coupling with A NADH Regeneration Formate Dehydrogenase
9α-Hydroxy-4-androstene-3,17-dione (9-OH-AD) is one of the significant intermediates for the preparation of β-methasone, dexamethasone, and other steroids. In general, the key enzyme that enables the biotransformation of 4-androstene-3,17-dione (AD) to 9-OH-AD is 3-phytosterone-9α-hydroxylase (KSH), which consists of two components: a terminal oxygenase (KshA) and ferredoxin reductase (KshB). The reaction is carried out with the concomitant oxidation of NADH to NAD+. In this study, the more efficient 3-phytosterone-9α-hydroxylase oxygenase (KshC) from the Mycobacterium sp. strain VKM Ac-1817D was confirmed and compared with reported KshA. To evaluate the function of KshC on the bioconversion of AD to 9-OH-AD, the characterization of KshC and the compounded system of KshB, KshC, and NADH was constructed. The optimum ratio of KSH oxygenase to reductase content was 1.5:1. An NADH regeneration system was designed by introducing a formate dehydrogenase, further confirming that a more economical process for biological transformation from AD to 9-OH-AD was established. A total of 7.78 g of 9-OH-AD per liter was achieved through a fed-batch process with a 92.11% conversion rate (mol/mol). This enzyme-mediated hydroxylation method provides an environmentally friendly and economical strategy for the production of 9-OH-AD.
Open AccessA Novel 3-Phytosterone-9α-Hydroxylase Oxygenation Component and Its Application in Bioconversion of 4-Androstene-3,17-Dione to 9α-Hydroxy-4-Androstene-3,17-Dione Coupling with A NADH Regeneration Formate Dehydrogenase
9α-Hydroxy-4-androstene-3,17-dione (9-OH-AD) is one of the significant intermediates for the preparation of β-methasone, dexamethasone, and other steroids. In general, the key enzyme that enables the biotransformation of 4-androstene-3,17-dione (AD) to 9-OH-AD is 3-phytosterone-9α-hydroxylase (KSH), which consists of two components: a terminal oxygenase (KshA) and ferredoxin reductase (KshB). The reaction is carried out with the concomitant oxidation of NADH to NAD+. In this study, the more efficient 3-phytosterone-9α-hydroxylase oxygenase (KshC) from the Mycobacterium sp. strain VKM Ac-1817D was confirmed and compared with reported KshA. To evaluate the function of KshC on the bioconversion of AD to 9-OH-AD, the characterization of KshC and the compounded system of KshB, KshC, and NADH was constructed. The optimum ratio of KSH oxygenase to reductase content was 1.5:1. An NADH regeneration system was designed by introducing a formate dehydrogenase, further confirming that a more economical process for biological transformation from AD to 9-OH-AD was established. A total of 7.78 g of 9-OH-AD per liter was achieved through a fed-batch process with a 92.11% conversion rate (mol/mol). This enzyme-mediated hydroxylation method provides an environmentally friendly and economical strategy for the production of 9-OH-AD.