JPJiang Pu

Jiang Pu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jiang Pu has a total of 98 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Ultrafast Acoustic Modulation of Second-Harmonic Generation in Monolayer Transition-Metal Dichalcogenides

    by Takumi Yamamoto, Hidetoshi Kanzawa, Yuta Takahashi, Hajime Kumazaki, Jiang Pu, Shinichi Watanabe, Shun Fujii

    High-speed modulation and deterministic control of optical nonlinear processes in nanomaterials are essential for realizing future nanoscale optoelectronic devices. Applying strain is a ubiquitous and versatile approach to deform atomically thin materials, allowing direct modification of their electronic and optical properties. Yet, strain engineering of nonlinear processes has so far relied predominantly on static approaches, which inherently limit modulation speed, reproducibility, and device scalability. Here, we demonstrate ultrafast acoustic modulation of second-harmonic (SH) generation in monolayer transition-metal dichalcogenides using surface acoustic waves (SAWs). By employing a fully phase-synchronized SH measurement combined with stroboscopic surface displacement detection, we directly visualize dynamic SH modulation at a frequency of 226 MHz. Moreover, theoretical modeling and determination of photoelastic coefficients enable quantitative extraction of the SAW-induced dynamic strain. Our results establish a direct link between acoustic fields and optical nonlinearities, providing a robust platform for dynamic strain engineering in two-dimensional nanophotonic devices.


  • Open Access

    Photovoltaic Device Based on Monolayer Compositionally Graded Transition Metal Dichalcogenide Alloy

    by Hao Ou, Sota Tsukamoto, Tenta Kitamura, Motoki Matsuno, Koshi Oi, Togo Takahashi, Takahiko Endo, Yasumitsu Miyata, Jiang Pu, Taishi Takenobu

    Monolayer transition metal dichalcogenides (TMDCs) have been widely studied for the fabrication of photovoltaic devices with high energy conversion efficiencies for future ultrathin optoelectronic devices. To create efficient photovoltaic devices, in‐plane heterostructures, whose composition can be artificially tailored by chemical vapor deposition, are a promising approach to form p‐n junctions spontaneously. Although sharp in‐plane heterostructures are typically employed, their narrow heterointerfaces are prone to defect sensitivity and thermal losses, which can significantly reduce device performance. In this study, we demonstrated that the spontaneous p‐n junction devices fabricated based on chemically synthesized compositionally graded monolayer WS 2 x Se 2(1‐ x ) alloys exhibited enhanced photoresponse performance. By conducting photocurrent and photoluminescence mappings, we revealed the correlation between the photocurrent generation behavior and local composition gradient. Moreover, the monolayer alloy device exhibited an open‐circuit voltage as high as 0.66 V, highlighting the potential of a compositionally graded p‐n junction for high‐efficiency photovoltaic devices. Our study presents a new approach for the development of efficient TMDC‐based optoelectronic devices.


  • Open Access

    A Memristive Oscillator

    by Yugo Oshima, Taishi Takenobu, Jiang Pu, Keisuke Ishiguro, Reizo Kato, Hiroshi M. Yamamoto, Tetsuro Kusamoto

    Memristors, or more generally “memristive systems,” are nonlinear electric components that change their resistance depending on a set of state variables. Meanwhile, negative differential resistance (NDR) is an uncommon electrical property that occurs in a few nonlinear electric components. Such a nonlinear property is now widely used in amplifiers and oscillators. It finds that one of the bilayer‐type nickel‐dithiolene complexes shows nonlinear transport with the NDR property and self‐oscillates under a bias current by simply adding a capacitor in parallel. Surprisingly, the Lissajous figure of this molecular material shows a “pinched hysteresis loop” typical of a memristor, and an inductive reactance emerges when a bias current or voltage is applied to the sample. Herein, a new type of oscillator that uses the NDR and hidden inductive properties of a memristive system is reported. The findings suggest that a memristive system can mimic other passive elements, such as an inductor, and can oscillate itself without having them in the circuit. The oscillation mechanism is straightforward and applicable to a wide variety of memristive materials, including resistors with large negative temperature coefficients, discharge tubes, and even nerve cells in the living body.


  • Vapor-Phase Indium Intercalation in van der Waals Nanofibers of Atomically Thin W6Te6 Wires

    by Ryusuke Natsui, Hiroshi Shimizu, Yusuke Nakanishi, Zheng Liu, Akito Shimamura, Nguyen Tuan Hung, Yung-Chang Lin, Takahiko Endo, Jiang Pu, Iori Kikuchi, et al.

    One-dimensional (1D) conducting materials are of great interest as potential building blocks for integrated nanocircuits. Ternary 1D transition-metal chalcogenides, consisting of M6X6 wires with intercalated A atoms (M = Mo or W; X = S, Se, or Te; A = alkali or rare metals, etc.), have attracted much attention due to their 1D metallic behavior, superconductivity, and mechanical flexibility. However, the conventional solid-state reaction usually produces micrometer-scale bulk crystals, limiting their potential use as nanoscale conductors. Here we demonstrate a versatile method to fabricate indium (In)-intercalated W6Te6 (In-W6Te6) bundles with a nanoscale thickness. We first prepared micrometer-long, crystalline bundles of van der Waals W6Te6 wires using chemical vapor deposition and intercalated In into the crystal via a vapor-phase reaction. Atomic-resolution electron microscopy revealed that In atoms were surrounded by three adjacent W6Te6 wires. First-principles calculations suggested that their wire-by-wire stacking can transform through postgrowth intercalation. Individual In-W6Te6 bundles exhibited metallic behavior, as theoretically predicted. We further identified the vibrational modes by combining polarized Raman spectroscopy and nonresonant Raman calculations.


  • Ion-gel-based light-emitting devices using transition metal dichalcogenides and hexagonal boron nitride heterostructures

    by Hao Ou, Koshi Oi, Rei Usami, Takahiko Endo, Yasumitsu Miyata, Jiang Pu, Taishi Takenobu

    Fabrication of high-performance optoelectronic devices is an important aspect of the application research of transition metal dichalcogenides (TMDCs). In this study, heterostructures of TMDCs and hexagonal boron nitrides (hBN) were successfully fabricated into light-emitting devices. Monolayer and artificially stacked homobilayer WS2 were prepared on hBN, respectively. They were then deposited with electrodes and covered by the ion gels to function as light-emitting devices. Both devices showed clear electroluminescence (EL) with voltages of ∼3 V. In monolayer device, a symmetric EL peak was observed with suppressed inhomogeneity. The bilayer device showed spectra that agreed with the natural bilayer samples. These results indicate the enhancement of the optical performance of TMDCs and the heterostructure could expand the potential of TMDC-based light-emitting devices.


  • Continuous Color‐Tunable Light‐Emitting Devices Based on Compositionally Graded Monolayer Transition Metal Dichalcogenide Alloys

    by Jiang Pu, Hao Ou, Tomoyuki Yamada, Naoki Wada, Hibiki Naito, Hiroto Ogura, Takahiko Endo, Zheng Liu, Toshifumi Irisawa, Kazuhiro Yanagi, et al.

    The diverse series of transition metal dichalcogenide (TMDC) materials has been employed in various optoelectronic applications, such as photodetectors, light‐emitting diodes, and lasers. Typically, the detection or emission range of optoelectronic devices is unique to the bandgap of the active material. Therefore, to improve the capability of these devices, extensive efforts have been devoted to tune the bandgap, such as gating, strain, and dielectric engineering. However, the controllability of these methods is severely limited (typically ≈0.1 eV). In contrast, alloying TMDCs is an effective approach that yields a composition‐dependent bandgap and enables light emissions over a wide range. In this study, a color‐tunable light‐emitting device using compositionally graded TMDC alloys is fabricated. The monolayer WS2/WSe2 alloy grown by chemical vapor deposition shows a spatial gradient in the light‐emission energy, which varies from 2.1 to 1.7 eV. This alloy is incorporated in an electrolyte‐based light‐emitting device structure that can tune the recombination zone laterally. Thus, a continuous and reversible color‐tunable light‐emitting device is successfully fabricated by controlling the light‐emitting positions. The results provide a new approach for exploring monolayer semiconductor‐based broadband optical applications.


  • Large-Scale 1T′-Phase Tungsten Disulfide Atomic Layers Grown by Gas-Source Chemical Vapor Deposition

    by Mitsuhiro Okada, Jiang Pu, Yung-Chang Lin, Takahiko Endo, Naoya Okada, Wen-Hsin Chang, Anh Khoa Augustin Lu, Takeshi Nakanishi, Tetsuo Shimizu, Toshitaka Kubo, et al.

    The control of crystal polymorphism and exploration of metastable, two-dimensional, 1T'-phase, transition-metal dichalcogenides (TMDs) have received considerable research attention. 1T'-phase TMDs are expected to offer various opportunities for the study of basic condensed matter physics and for its use in important applications, such as devices with topological states for quantum computing, low-resistance contact for semiconducting TMDs, energy storage devices, and as hydrogen evolution catalysts. However, due to the high energy difference and phase change barrier between 1T' and the more stable 2H-phase, there are few methods that can be used to obtain monolayer 1T'-phase TMDs. Here, we report on the chemical vapor deposition (CVD) growth of 1T'-phase WS2 atomic layers from gaseous precursors, i.e., H2S and WF6, with alkali metal assistance. The gaseous nature of the precursors, reducing properties of H2S, and presence of Na+, which acts as a countercation, provided an optimal environment for the growth of 1T'-phase WS2, resulting in the formation of high-quality submillimeter-sized crystals. The crystal structure was characterized by atomic-resolution scanning transmission electron microscopy, and the zigzag chain structure of W atoms, which is characteristic of the 1T' structure, was clearly observed. Furthermore, the grown 1T'-phase WS2 showed superconductivity with the transition temperature in the 2.8-3.4 K range and large upper critical field anisotropy. Thus, alkali metal assisted gas-source CVD growth is useful for realizing large-scale, high-quality, phase-engineered TMD atomic layers via a bottom-up synthesis.


  • Efficient and Chiral Electroluminescence from In‐Plane Heterostructure of Transition Metal Dichalcogenide Monolayers

    by Naoki Wada, Jiang Pu, Yuhei Takaguchi, Wenjin Zhang, Zheng Liu, Takahiko Endo, Toshifumi Irisawa, Kazunari Matsuda, Yuhei Miyauchi, Taishi Takenobu, et al.

    Atomically thin transition metal dichalcogenides (TMDCs) are attractive materials for future optoelectronic applications because of their excellent electrical, optical, and quantum (spin‐valley) properties. In particular, in‐plane heterostructures based on TMDC monolayers provide opportunities to directly modulate band structures and lattice strains by the spatial distribution of constituent elements, leading to efficient control of their carrier transport and recombination. However, it is still challenging to create light‐emitting devices using such in‐plane heterostructures because of the technical difficulties associated with sample/device fabrication. This study demonstrated interfacial electroluminescence (EL) in diverse TMDC monolayer in‐plane heterostructures. Various combinations of large‐area, single‐crystalline in‐plane heterostructures with sharp interfaces are grown by chemical vapor deposition, followed by the adoption of electrolyte‐based light‐emitting devices to observe EL. The fine heterostructures enabled the capture of the linear‐shaped EL fixed along the junction interfaces. Significantly, the WS2/WSe2 in‐plane heterostructures exhibited circularly polarized EL with polarizability of 10% at room temperature. This can be explained by the interfacial strain‐mediated electronic structure evolution, in which the combination of electric fields and strain‐induced valley drifts realizes selective EL from the K/K’ valley. These findings pave the way for expanding the potential of monolayer in‐plane heterostructures for use in functional optoelectronic devices.


  • Electric-field-induced metal-insulator transition and quantum transport in large-area polycrystalline MoS2 monolayers

    by Hao Ou, Tomoyuki Yamada, Masaya Mitamura, Yusuke Edagawa, Tatsuma D. Matsuda, Kazuhiro Yanagi, Chang-Hsiao Chen, Lain-Jong Li, Taishi Takenobu, Jiang Pu

    Monolayer MoS2 is an attractive candidate for developing future electronics and exploring fundamental physics because of its unique quantum properties. High-performance MoS2 transistors with superior transport originating from spin-valley coupling have been reported. However, these transistors have used single-crystalline flakes. In most large-area polycrystalline MoS2, these excellent transport properties have not been realized because of the effects of grain boundaries, and their fundamental low-temperature transport has not been studied in detail. Here, we apply electrolyte-gating methods using chemically grown centimeter-scale polycrystalline monolayers. Owing to the high carrier density, the resistance is systematically tuned from insulating to metallic conduction. Importantly, we observed metallic transport at temperatures down to 1.9 K and a high mobility of >100cm2nV−1s−1. Moreover, the magnetotransport exhibits an electric-field-induced crossover from weak localization to weak antilocalization, indicating that high carrier density dramatically suppresses the grain boundary effects to enable intrinsic quantum transport. The results reveal that polycrystalline MoS2 monolayers have significant potential for use in large-area nanoelectronics.


  • Ultrafast Singlet Fission and Efficient Carrier Transport in a Lamellar Assembly of Bis[(trialkoxyphenyl)ethynyl]pentacene

    by Hayato Sakai, Keisuke Yoshino, Yoshiaki Shoji, Takashi Kajitani, Jiang Pu, Takanori Fukushima, Taishi Takenobu, Nikolai V. Tkachenko, Taku Hasobe

    Pentacene derivatives carrying 3,4,5-trialkoxyphenylethynyl groups with different alkyl chain lengths (OCnH2n+1; n = 6, 12, 16) at the 6- and 13-positions of pentacene (denoted as PcCn) were newly synthesized to examine chain-length effects on self-assembly, optical, and electronic properties. Upon fast injection of a cyclohexane solution of PcCn into isopropyl alcohol, PcC6 and PcC12 underwent controlled self-assembly to give rise to spherical and fibrous nano-objects, respectively, while this self-assembly procedure could not be applied to PcC16 because of its poor solubility. Powder X-ray diffraction (PXRD) analysis showed that the nanofiber of PcC12 consists of a lamellar structure, where an effective overlap between the pentacene chromophores occur, resulting in significantly broadened and red-shifted absorption spectral features, compared with those observed for molecularly dispersed PcC12 in cyclohexane. In contrast, based on PXRD analysis, the fundamental assembly pattern of the nanoparticle of PcC6 was characterized by a two-dimensional hexagonal structure. Although a shorter core-to-core separation of 3.35 Å was observed for the nanoparticle, judging from the absorption properties, the pentacene chromophores involved in the PcC6 assembly do not effectively interact with each other. Interestingly, femtosecond transient absorption spectroscopy indicated that PcC6 in the spherical assembly tends to undergo deactivation of the singlet excited state, while PcC12 in the fibrous assembly shows ultrafast intermolecular singlet fission (apparent rate constant kSF ≥ 1012 s–1). A field-effect transistor (FET) fabricated using the nanofiber of PcC12 and an ion gel as the active layer and gate materials, respectively, exhibited a p-type behavior with a carrier mobility as high as 2.4 × 10–4 cm2 V–1 s–1, despite the fact that fibrous materials, where nanoscale conducting domains discontinuously aggregate as an entity, are not favorable for FET applications. Through this study, we demonstrate that a proper design of the side-chain length enables a pentacene chromophore to assemble into an arrangement beneficial for exhibiting optical and electronic properties.