Baoying Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Baoying Liu has a total of 35 co-authors. Here are the top co-authors by number of shared publications:
- Xiaomin Fang
Henan Provincial Engineering Research Center for Functional Materials and Catalytic Reactions Henan University Kaifeng Henan P. R. China
7 shared publications Weili Feng
College of Chemistry and Chemical Engineering, Henan University, Kaifeng, China
4 shared publicationsJunliang Wang
College of Chemistry and Chemical Engineering, Henan University, Kaifeng, China
3 shared publicationsTao Ding
Henan Engineering Laboratory of Flame Retardant and Functional Materials, Henan University, Kaifeng, China
3 shared publications- Tao Ding
College of Chemistry and Chemical Engineering, Henan University, Kaifeng 475004, China
3 shared publications Xinglong Kang
Henan Engineering Laboratory of Flame Retardant and Functional Materials, Henan University, Kaifeng, China
3 shared publications
Latest Publications
- Open Access
Synergistic Modification of Polyformaldehyde by Biobased Calcium Magnesium Bi-Ionic Melamine Phytate with Intumescent Flame Retardant
Intumescent flame retardants (IFRs) are mainly composed of ammonium polyphosphate (APP), melamine (ME), and some macromolecular char-forming agents. The traditional IFR still has some defects in practical application, such as poor compatibility with the matrix and low flame-retardant efficiency. In order to explore the best balance between flame retardancy and mechanical properties of flame-retardant polyformaldehyde (POM) composite, a biobased calcium magnesium bi-ionic melamine phytate (DPM) synergist was prepared based on renewable biomass polyphosphate phytic acid (PA), and its synergistic system with IFRs was applied to an intumescent flame-retardant POM system. POM/IFR systems can only pass the V-1 grade of the vertical combustion test (UL-94) if they have a limited oxygen index (LOI) of only 48.5%. When part of an IFR was replaced by DPM, the flame retardancy of the composite was significantly improved, and the POM/IFR/4 wt%DPM system reached the V-0 grade of UL-94, and the LOI reached 59.1%. Compared with pure POM, the PkHRR and THR of the POM/IFR/4 wt%DPM system decreased by 61.5% and 51.2%, respectively. Compared with the POM/IFR system, the PkHRR and THR of the POM/IFR/4 wt%DPM system were decreased by 20.8% and 27.5%, respectively, and carbon residue was increased by 37.2%. The mechanical properties of the composite also showed a continuous upward trend with the increase in DPM introduction. It is shown that the introduction of DPM not only greatly reduces the heat release rate and heat release amount of the intumescent flame-retardant POM system, reducing the fire hazard, but it also effectively improves the compatibility between the filler and the matrix and improves the mechanical properties of the composite. It provides a new approach for developing a new single-component multifunctional flame retardant or synergist for intumescent flame-retardant POM systems.
Open AccessSynergistic Modification of Polyformaldehyde by Biobased Calcium Magnesium Bi-Ionic Melamine Phytate with Intumescent Flame Retardant
Intumescent flame retardants (IFRs) are mainly composed of ammonium polyphosphate (APP), melamine (ME), and some macromolecular char-forming agents. The traditional IFR still has some defects in practical application, such as poor compatibility with the matrix and low flame-retardant efficiency. In order to explore the best balance between flame retardancy and mechanical properties of flame-retardant polyformaldehyde (POM) composite, a biobased calcium magnesium bi-ionic melamine phytate (DPM) synergist was prepared based on renewable biomass polyphosphate phytic acid (PA), and its synergistic system with IFRs was applied to an intumescent flame-retardant POM system. POM/IFR systems can only pass the V-1 grade of the vertical combustion test (UL-94) if they have a limited oxygen index (LOI) of only 48.5%. When part of an IFR was replaced by DPM, the flame retardancy of the composite was significantly improved, and the POM/IFR/4 wt%DPM system reached the V-0 grade of UL-94, and the LOI reached 59.1%. Compared with pure POM, the PkHRR and THR of the POM/IFR/4 wt%DPM system decreased by 61.5% and 51.2%, respectively. Compared with the POM/IFR system, the PkHRR and THR of the POM/IFR/4 wt%DPM system were decreased by 20.8% and 27.5%, respectively, and carbon residue was increased by 37.2%. The mechanical properties of the composite also showed a continuous upward trend with the increase in DPM introduction. It is shown that the introduction of DPM not only greatly reduces the heat release rate and heat release amount of the intumescent flame-retardant POM system, reducing the fire hazard, but it also effectively improves the compatibility between the filler and the matrix and improves the mechanical properties of the composite. It provides a new approach for developing a new single-component multifunctional flame retardant or synergist for intumescent flame-retardant POM systems.
- Open Access
Sisal-Fiber-Reinforced Polypropylene Flame-Retardant Composites: Preparation and Properties
Natural-fiber-reinforced polypropylene (PP) composites with a series of advantages including light weight, chemical durability, renewable resources, low in cost, etc., are being widely used in many fields such as the automotive industry, packaging, and construction. However, the flammability of plant fiber and the PP matrix restricts the application range, security, and use of these composites. Therefore, it is of great significance to study the flame retardants of such composites. In this paper, sisal-fiber-reinforced polypropylene (PP/SF) flame-retardant composites were prepared using the two-step melt blending method. The flame retardant used was an intumescent flame retardant (IFR) composed of silane-coated ammonium polyphosphate (Si-APP) and pentaerythritol (PER). The influence of different blending processes on the flammability and mechanical properties of the composites was analyzed. The findings suggested that PP/SF flame-retardant composites prepared via different blending processes showed different flame-retardant properties. The (PP/SF)/IFR composite prepared by PP/SF secondary blending with IFR showed excellent flame-retardant performance, with a limited oxygen index of about 28.3% and passing the UL-94 V-0 rating (3.2 mm) in the vertical combustion test. Compared with the (PP/IFR) /SF composite prepared by a matrix primarily blended with IFR and then secondly blended with SF, the peak heat release rate (pk HRR) and total heat release (THR) of the (PP/SF)/IFR composite decreased by 11.3% and 13.7%, respectively. In contrast, the tensile strength of the (PP/SF)/IFR system was 5.3% lower than that of the (PP/IFR)/SF system; however, the overall mechanical (tensile, flexural, and notched impact) properties of the composites prepared using three different mixing processes were similar.
Open AccessSisal-Fiber-Reinforced Polypropylene Flame-Retardant Composites: Preparation and Properties
Natural-fiber-reinforced polypropylene (PP) composites with a series of advantages including light weight, chemical durability, renewable resources, low in cost, etc., are being widely used in many fields such as the automotive industry, packaging, and construction. However, the flammability of plant fiber and the PP matrix restricts the application range, security, and use of these composites. Therefore, it is of great significance to study the flame retardants of such composites. In this paper, sisal-fiber-reinforced polypropylene (PP/SF) flame-retardant composites were prepared using the two-step melt blending method. The flame retardant used was an intumescent flame retardant (IFR) composed of silane-coated ammonium polyphosphate (Si-APP) and pentaerythritol (PER). The influence of different blending processes on the flammability and mechanical properties of the composites was analyzed. The findings suggested that PP/SF flame-retardant composites prepared via different blending processes showed different flame-retardant properties. The (PP/SF)/IFR composite prepared by PP/SF secondary blending with IFR showed excellent flame-retardant performance, with a limited oxygen index of about 28.3% and passing the UL-94 V-0 rating (3.2 mm) in the vertical combustion test. Compared with the (PP/IFR) /SF composite prepared by a matrix primarily blended with IFR and then secondly blended with SF, the peak heat release rate (pk HRR) and total heat release (THR) of the (PP/SF)/IFR composite decreased by 11.3% and 13.7%, respectively. In contrast, the tensile strength of the (PP/SF)/IFR system was 5.3% lower than that of the (PP/IFR)/SF system; however, the overall mechanical (tensile, flexural, and notched impact) properties of the composites prepared using three different mixing processes were similar.
- Open Access
Synergistic Flame Retardant Properties of Polyoxymethylene with Surface Modified Intumescent Flame Retardant and Calcium Carbonate
Ammonium polyphosphate (APP) was successfully modified by a titanate coupling agent which was compounded with benzoxazine (BOZ) and melamine (ME) to become a new type of intumescent flame retardant (Ti-IFR). Ti-IFR and CaCO3 as synergists were utilized to modify polyoxymethylene (POM), and the flame-retardant properties and mechanism of the composites were analyzed by vertical combustion (UL-94), limiting oxygen index (LOI), TG-IR, and cone calorimeter (Cone), etc. The results show that Ti-IFR can enhance the gas phase flame retardant effect, while CaCO3 further strengthens the barrier effect in the condensed phase. When they were used together, they can exert their performance, respectively, at the same time showing excellent synergistic effect. The FR-POM composite with 29% Ti-IFR and 1% CaCO3 can pass the UL-94 V0 level. The LOI reaches 58.2%, the average heat release (Av HRR) is reduced by 81.1% and the total heat release (THR) is decreased by 35.3%.
Open AccessSynergistic Flame Retardant Properties of Polyoxymethylene with Surface Modified Intumescent Flame Retardant and Calcium Carbonate
Ammonium polyphosphate (APP) was successfully modified by a titanate coupling agent which was compounded with benzoxazine (BOZ) and melamine (ME) to become a new type of intumescent flame retardant (Ti-IFR). Ti-IFR and CaCO3 as synergists were utilized to modify polyoxymethylene (POM), and the flame-retardant properties and mechanism of the composites were analyzed by vertical combustion (UL-94), limiting oxygen index (LOI), TG-IR, and cone calorimeter (Cone), etc. The results show that Ti-IFR can enhance the gas phase flame retardant effect, while CaCO3 further strengthens the barrier effect in the condensed phase. When they were used together, they can exert their performance, respectively, at the same time showing excellent synergistic effect. The FR-POM composite with 29% Ti-IFR and 1% CaCO3 can pass the UL-94 V0 level. The LOI reaches 58.2%, the average heat release (Av HRR) is reduced by 81.1% and the total heat release (THR) is decreased by 35.3%.
- 15 January 2021
- Published by Springer Nature in Advanced Composites and Hybrid Materials
- Vol. 4 (1) , 127-137
A novel phosphorous and silicon-containing benzoxazine: highly efficient multifunctional flame-retardant synergist for polyoxymethylene
- 15 January 2021
- Published by Springer Nature in Advanced Composites and Hybrid Materials
- Vol. 4 (1) , 127-137
A novel phosphorous and silicon-containing benzoxazine: highly efficient multifunctional flame-retardant synergist for polyoxymethylene
- 1 November 2020
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 31 (11) , 2512-2525
Flame retardant effect and mechanism of benzoxazine as synergist in intumescent flame-retardant polyoxymethylene
- 1 November 2020
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 31 (11) , 2512-2525
Flame retardant effect and mechanism of benzoxazine as synergist in intumescent flame-retardant polyoxymethylene
- 30 October 2020
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 138 (14)
Influence of modified ammonium polyphosphate on the fire behavior and mechanical properties of polyformaldehyde
In this work, three kinds of APP, coated with melamine (MF‐APP), silane (GW‐APP), epoxy (MC‐APP) were employed to compound with novolac resin (Novolac) and melamine (ME), aimed to study the effect of the modified APP on the flame‐retardant performance, mechanical properties, and thermal stability of polyformaldehyde (POM). The results showed that composites with modified APP exhibited better flame retardant and mechanical performance than that with unmodified APP. In contrast, GW‐APP had the best synergistic effect with Novolac and ME, and POM/GW‐APP composites reached UL‐94 V‐0 rating and its limit oxygen index (LOI) value was up to 34.0%. The morphology of the carbon layer showed that the silane coating material can promote the charring process in condensed phase better than epoxy and melamine coating materials in flame retardant POM system, leading to the formation of integrated char layers with more quantity and higher quality, which effectively delayed the mass and heat transfer during combustion.
- 30 October 2020
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 138 (14)
Influence of modified ammonium polyphosphate on the fire behavior and mechanical properties of polyformaldehyde
In this work, three kinds of APP, coated with melamine (MF‐APP), silane (GW‐APP), epoxy (MC‐APP) were employed to compound with novolac resin (Novolac) and melamine (ME), aimed to study the effect of the modified APP on the flame‐retardant performance, mechanical properties, and thermal stability of polyformaldehyde (POM). The results showed that composites with modified APP exhibited better flame retardant and mechanical performance than that with unmodified APP. In contrast, GW‐APP had the best synergistic effect with Novolac and ME, and POM/GW‐APP composites reached UL‐94 V‐0 rating and its limit oxygen index (LOI) value was up to 34.0%. The morphology of the carbon layer showed that the silane coating material can promote the charring process in condensed phase better than epoxy and melamine coating materials in flame retardant POM system, leading to the formation of integrated char layers with more quantity and higher quality, which effectively delayed the mass and heat transfer during combustion.
- Open Access
- 5 March 2020
- Published by MDPI AG in Nanomaterials
- Vol. 10 (3) , 467
Core–Shell Structured Phenolic Polymer@TiO2 Nanosphere with Enhanced Visible-Light Photocatalytic Efficiency
Core–shell structured TiO2 is a promising solution to promote the photocatalytic effectiveness in visible light. Compared to metal or semiconductor materials, polymers are rarely used as the core materials for fabricating core–shell TiO2 materials. A novel core–shell structured polymer@TiO2 was developed by using phenolic polymer (PP) colloid nanoparticles as the core material. The PP nanoparticles were synthesized by an enzyme-catalyzed polymerization in water. A subsequent sol–gel and hydrothermal reaction was utilized to cover the TiO2 shell on the surfaces of PP particles. The thickness of the TiO2 shell was controlled by the amount of TiO2 precursor. The covalent connection between PP and TiO2 was established after the hydrothermal reaction. The core–shell structure allowed the absorption spectra of PP@TiO2 to extend to the visible-light region. Under visible-light irradiation, the core–shell nanosphere displayed enhanced photocatalytic efficiency for rhodamine B degradation and good recycle stability. The interfacial C–O–Ti bonds and the π-conjugated structures in the PP@TiO2 nanosphere played a key role in the quick transfer of the excited electrons between PP and TiO2, which greatly improved the photocatalytic efficiency in visible light.
- 5 March 2020
- Published by MDPI AG in Nanomaterials
- Vol. 10 (3) , 467
Open AccessCore–Shell Structured Phenolic Polymer@TiO2 Nanosphere with Enhanced Visible-Light Photocatalytic Efficiency
Core–shell structured TiO2 is a promising solution to promote the photocatalytic effectiveness in visible light. Compared to metal or semiconductor materials, polymers are rarely used as the core materials for fabricating core–shell TiO2 materials. A novel core–shell structured polymer@TiO2 was developed by using phenolic polymer (PP) colloid nanoparticles as the core material. The PP nanoparticles were synthesized by an enzyme-catalyzed polymerization in water. A subsequent sol–gel and hydrothermal reaction was utilized to cover the TiO2 shell on the surfaces of PP particles. The thickness of the TiO2 shell was controlled by the amount of TiO2 precursor. The covalent connection between PP and TiO2 was established after the hydrothermal reaction. The core–shell structure allowed the absorption spectra of PP@TiO2 to extend to the visible-light region. Under visible-light irradiation, the core–shell nanosphere displayed enhanced photocatalytic efficiency for rhodamine B degradation and good recycle stability. The interfacial C–O–Ti bonds and the π-conjugated structures in the PP@TiO2 nanosphere played a key role in the quick transfer of the excited electrons between PP and TiO2, which greatly improved the photocatalytic efficiency in visible light.
- 10 July 2019
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 30 (11) , 2686-2694
Synthesis of siloxane‐containing benzoxazine and its synergistic effect on flame retardancy of polyoxymethylene
A type of trialkoxysilane‐containing naphtholoxazine compound (Naph‐boz) was successfully synthesized and combined with ammonium polyphosphate/melamine (APP/ME) as an intumescent flame retardant (IFR) to improve the flame‐retardant efficiency of polyoxymethylene (POM). The Underwriters Laboratories 94 (UL94) vertical burning test, limiting oxygen index (LOI), cone calorimeter, thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and Raman spectral analysis were used to study the flame‐retardant properties and related mechanism. The results showed that the formulation with 20 wt.% of APP, 6 wt.% of ME, and 4 wt.% of Naph‐boz passed UL94 V‐1 rating, and the LOI value was improved to 40.3%. Compared with pure POM, the IFR with Naph‐boz had greater reduction in peak heat release rate (lower 74.9%) and total heat release (lower 40.2%). SEM images showed that compact and reinforcing charred layer was formed during the POM/IFR/4Naph‐boz samples combustion, which was beneficial at reducing and maintaining low combustion parameters throughout the cone calorimeter test. The synergistic flame‐retardant effect between Naph‐boz and APP/ME was considered as the reason for the improvement in flame retardancy POM. Furthermore, because of the Naph‐boz was conducive to the compatibility between the flame retardants and matrix, the notched Izod impact strength of POM/IFR/4Naph‐boz composite was higher than that of POM/IFR system.
- 10 July 2019
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 30 (11) , 2686-2694
Synthesis of siloxane‐containing benzoxazine and its synergistic effect on flame retardancy of polyoxymethylene
A type of trialkoxysilane‐containing naphtholoxazine compound (Naph‐boz) was successfully synthesized and combined with ammonium polyphosphate/melamine (APP/ME) as an intumescent flame retardant (IFR) to improve the flame‐retardant efficiency of polyoxymethylene (POM). The Underwriters Laboratories 94 (UL94) vertical burning test, limiting oxygen index (LOI), cone calorimeter, thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and Raman spectral analysis were used to study the flame‐retardant properties and related mechanism. The results showed that the formulation with 20 wt.% of APP, 6 wt.% of ME, and 4 wt.% of Naph‐boz passed UL94 V‐1 rating, and the LOI value was improved to 40.3%. Compared with pure POM, the IFR with Naph‐boz had greater reduction in peak heat release rate (lower 74.9%) and total heat release (lower 40.2%). SEM images showed that compact and reinforcing charred layer was formed during the POM/IFR/4Naph‐boz samples combustion, which was beneficial at reducing and maintaining low combustion parameters throughout the cone calorimeter test. The synergistic flame‐retardant effect between Naph‐boz and APP/ME was considered as the reason for the improvement in flame retardancy POM. Furthermore, because of the Naph‐boz was conducive to the compatibility between the flame retardants and matrix, the notched Izod impact strength of POM/IFR/4Naph‐boz composite was higher than that of POM/IFR system.