Chinnapat Buachart
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Chinnapat Buachart has a total of 55 co-authors. Here are the top co-authors by number of shared publications:
- Chayanon Hansapinyo
Excellence Centre in Infrastructure Technology and Transportation Engineering, Faculty of Engineering, Chiang Mai University, Chiang Mai 50200, Thailand
8 shared publications - Worathep Sae-Long
Civil Engineering Program, School of Engineering, University of Phayao, Phayao 56000, Thailand
5 shared publications - Suchart Limkatanyu
Department of Civil and Environmental Engineering, Faculty of Engineering, Prince of Songkla University, Songkla 90110, Thailand
4 shared publications - Damrongsak Rinchumphu
Department of Civil Engineering, Faculty of Engineering, Chiang Mai University, Chiang Mai 50200, Thailand
3 shared publications - Panatchai Chetchotisak
Rajamangala University of Technology Isan
3 shared publications - Teewara Suwan
Chiang Mai University
3 shared publications
Latest Publications
- Open Access
- 1 October 2026
- Published by Ital Publication in Civil Engineering Journal
- Vol. 12 (10) , 4449-4473
Impact Response of RC Beams Under Mass–Velocity Variations and Axial Compression: Constitutive Model Comparison
This study aims to investigate the impact response of reinforced concrete (RC) beams under equal-energy mass–velocity combinations and combined axial compression and to compare the predicted responses obtained from different concrete constitutive models. Nonlinear finite element simulations were performed using LS-DYNA and validated against a published drop-weight impact experiment. Three concrete models, KCC (*MAT_072R3), CSCM (*MAT_159), and Winfrith (*MAT_084), were compared using consistent fundamental material properties. Five mass–velocity combinations, ranging from 50 kg–13.72 m/s to 1000 kg–3.07 m/s at a constant impact energy of approximately 4.7 kJ, and axial compression ratios of 0–30% were investigated. The results show that equal impact energy does not produce equivalent structural responses. Low-mass/high-velocity impacts generated higher peak forces, shorter contact durations, and localized shear-dominated damage, whereas high-mass/low-velocity impacts produced greater displacement and flexural behavior. Increasing axial compression generally increased peak force while reducing displacement and contact duration. The three models predicted similar global responses but showed greater differences in local impact responses, particularly peak force and damage localization. The novelty of this study lies in systematically comparing the predictions of different concrete constitutive models under varying mass–velocity combinations and axial compression, providing guidance for constitutive-model selection in RC impact simulations.
- 1 October 2026
- Published by Ital Publication in Civil Engineering Journal
- Vol. 12 (10) , 4449-4473
Open AccessImpact Response of RC Beams Under Mass–Velocity Variations and Axial Compression: Constitutive Model Comparison
This study aims to investigate the impact response of reinforced concrete (RC) beams under equal-energy mass–velocity combinations and combined axial compression and to compare the predicted responses obtained from different concrete constitutive models. Nonlinear finite element simulations were performed using LS-DYNA and validated against a published drop-weight impact experiment. Three concrete models, KCC (*MAT_072R3), CSCM (*MAT_159), and Winfrith (*MAT_084), were compared using consistent fundamental material properties. Five mass–velocity combinations, ranging from 50 kg–13.72 m/s to 1000 kg–3.07 m/s at a constant impact energy of approximately 4.7 kJ, and axial compression ratios of 0–30% were investigated. The results show that equal impact energy does not produce equivalent structural responses. Low-mass/high-velocity impacts generated higher peak forces, shorter contact durations, and localized shear-dominated damage, whereas high-mass/low-velocity impacts produced greater displacement and flexural behavior. Increasing axial compression generally increased peak force while reducing displacement and contact duration. The three models predicted similar global responses but showed greater differences in local impact responses, particularly peak force and damage localization. The novelty of this study lies in systematically comparing the predictions of different concrete constitutive models under varying mass–velocity combinations and axial compression, providing guidance for constitutive-model selection in RC impact simulations.
- Open Access
- 16 August 2026
- Published by Elsevier in Advances in Bamboo Science
- Vol. 16
A PCA-assisted machine learning framework for non-destructive multi-strength prediction of structural bamboo (Dendrocalamus sericeus Munro)
- 16 August 2026
- Published by Elsevier in Advances in Bamboo Science
- Vol. 16
Open AccessA PCA-assisted machine learning framework for non-destructive multi-strength prediction of structural bamboo (Dendrocalamus sericeus Munro)
- 1 April 2026
- Published by Ital Publication in Civil Engineering Journal
- Vol. 12 (4) , 1334-1353
Evaluating Signal Processing Methods for Instantaneous Frequency Analysis in Time-Varying Mass Structures
Time-varying mass (TVM) structures exhibit complex dynamic phenomena but remain insufficiently investigated, particularly in the frequency domain. For example, granular discharge in silos generates vibrations due to rapid mass reduction, leading to nonlinear and non-stationary responses. This study aims to evaluate the capability of three common signal processing algorithms-Empirical Mode Decomposition (EMD), Variational Mode Decomposition (VMD), and Empirical Wavelet Transform (EWT)-for analysing instantaneous frequency variations in TVM structures. The signals are first decomposed into mono-component modes and subsequently analyzed using the Hilbert transform to extract instantaneous frequency. The investigation is conducted in two stages: (i) numerical validation using an artificial nonlinear signal and a time-varying parameter SDOF system with known frequency histories, and (ii) application to experimental acceleration data obtained from sand discharge in a polycarbonate silo under noisy conditions. The findings show that EMD provides the most accurate frequency estimation for clean signals, whereas VMD and EWT demonstrate improved stability for experimental data with significant noise. The study provides a systematic comparison of decomposition-based instantaneous frequency methods in TVM structures and highlights the importance of appropriate method selection for safer and more reliable frequency-domain structural design.
- 1 April 2026
- Published by Ital Publication in Civil Engineering Journal
- Vol. 12 (4) , 1334-1353
Evaluating Signal Processing Methods for Instantaneous Frequency Analysis in Time-Varying Mass Structures
Time-varying mass (TVM) structures exhibit complex dynamic phenomena but remain insufficiently investigated, particularly in the frequency domain. For example, granular discharge in silos generates vibrations due to rapid mass reduction, leading to nonlinear and non-stationary responses. This study aims to evaluate the capability of three common signal processing algorithms-Empirical Mode Decomposition (EMD), Variational Mode Decomposition (VMD), and Empirical Wavelet Transform (EWT)-for analysing instantaneous frequency variations in TVM structures. The signals are first decomposed into mono-component modes and subsequently analyzed using the Hilbert transform to extract instantaneous frequency. The investigation is conducted in two stages: (i) numerical validation using an artificial nonlinear signal and a time-varying parameter SDOF system with known frequency histories, and (ii) application to experimental acceleration data obtained from sand discharge in a polycarbonate silo under noisy conditions. The findings show that EMD provides the most accurate frequency estimation for clean signals, whereas VMD and EWT demonstrate improved stability for experimental data with significant noise. The study provides a systematic comparison of decomposition-based instantaneous frequency methods in TVM structures and highlights the importance of appropriate method selection for safer and more reliable frequency-domain structural design.
- Open Access
- 28 October 2025
- Published by Faculty of Architecture and Planning, Thammasat University in Journal of Architectural/Planning Research and Studies (JARS)
- Vol. 23 (1)
Plant Impact on Indoor Carbon Dioxide Concentration Using Ensemble Voting Prediction Models
Indoor air quality, particularly carbon dioxide (CO₂) levels, is critical to occupants’ health and comfort. This study developed predictive models for indoor CO₂ concentrations based on environmental variables, including light, temperature, humidity, and the presence of plants. Data collected from sensors within a controlled indoor environment were used to train predictive models using various techniques, including artificial neural networks (ANN), k-Nearest Neighbors (k-NN), Random Forest, and generalized linear models. Among standalone models, the ANN with a 70:30 train-test split yielded the best performance, achieving a root mean square error (RMSE) of 10.960, mean absolute error (MAE) of 7.300, and a coefficient of determination (R²) of 0.640. The study further explored ensemble methods by combining ANN, k-NN, and generalized linear models through soft voting. The optimal ensemble configuration—ANN and k-NN with a 90:10 split ratio—achieved an RMSE of 11.437, MAE of 8.153, and R² of 0.650, outperforming the standalone models. In addition, the results demonstrated that the presence of plants within a room significantly reduced CO₂ levels under specific conditions (20-30°C and 200 lux), highlighting plants' potential to improve indoor air quality. This research suggests that ensemble models offer a viable solution for accurate indoor CO₂ prediction, with practical applications in indoor environmental management, especially when coupled with biophilic design elements such as indoor plants.
- 28 October 2025
- Published by Faculty of Architecture and Planning, Thammasat University in Journal of Architectural/Planning Research and Studies (JARS)
- Vol. 23 (1)
Open AccessPlant Impact on Indoor Carbon Dioxide Concentration Using Ensemble Voting Prediction Models
Indoor air quality, particularly carbon dioxide (CO₂) levels, is critical to occupants’ health and comfort. This study developed predictive models for indoor CO₂ concentrations based on environmental variables, including light, temperature, humidity, and the presence of plants. Data collected from sensors within a controlled indoor environment were used to train predictive models using various techniques, including artificial neural networks (ANN), k-Nearest Neighbors (k-NN), Random Forest, and generalized linear models. Among standalone models, the ANN with a 70:30 train-test split yielded the best performance, achieving a root mean square error (RMSE) of 10.960, mean absolute error (MAE) of 7.300, and a coefficient of determination (R²) of 0.640. The study further explored ensemble methods by combining ANN, k-NN, and generalized linear models through soft voting. The optimal ensemble configuration—ANN and k-NN with a 90:10 split ratio—achieved an RMSE of 11.437, MAE of 8.153, and R² of 0.650, outperforming the standalone models. In addition, the results demonstrated that the presence of plants within a room significantly reduced CO₂ levels under specific conditions (20-30°C and 200 lux), highlighting plants' potential to improve indoor air quality. This research suggests that ensemble models offer a viable solution for accurate indoor CO₂ prediction, with practical applications in indoor environmental management, especially when coupled with biophilic design elements such as indoor plants.
- Open Access
- 30 September 2025
- Published by MDPI AG in Technologies
- Vol. 13 (10) , 439
A Dynamic Digital Twin Framework for Sustainable Facility Management in a Smart Campus: A Case Study of Chiang Mai University
This study presents the development and deployment of a modular digital twin system designed to enhance sustainable facility management within a smart campus context. The system was implemented at the Faculty of Engineering, Chiang Mai University, and integrates 3D spatial modeling, real-time environmental and energy sensor data, and multiscale dashboard visualization. Grounded in stakeholder-driven requirements, the platform emphasizes energy management, which is the top priority among campus administrators and technicians. The development process followed a four-phase methodology: (1) stakeholder consultation and requirement analysis; (2) physical data acquisition and 3D model generation; (3) sensor deployment using IoT technologies with NB-IoT and LoRaWAN protocols; and (4) real-time data integration via Firebase and standardized APIs. A suite of dashboards was developed to support interactive monitoring across faculty, building, floor, and room levels. System testing with campus users demonstrated high usability, intuitive spatial navigation, and actionable insights for energy consumption analysis. Feedback indicated strong interest in features supporting data export and predictive analytics. The platform’s modular and hardware-agnostic architecture enables future extensions, including occupancy tracking, water monitoring, and automated control systems. Overall, the digital twin system offers a replicable and scalable model for data-driven facility management aligned with sustainability goals. Its real-time, multiscale capabilities contribute to operational transparency, resource optimization, and climate-responsive campus governance, setting the foundation for broader applications in smart cities and built environment innovation.
- 30 September 2025
- Published by MDPI AG in Technologies
- Vol. 13 (10) , 439
Open AccessA Dynamic Digital Twin Framework for Sustainable Facility Management in a Smart Campus: A Case Study of Chiang Mai University
This study presents the development and deployment of a modular digital twin system designed to enhance sustainable facility management within a smart campus context. The system was implemented at the Faculty of Engineering, Chiang Mai University, and integrates 3D spatial modeling, real-time environmental and energy sensor data, and multiscale dashboard visualization. Grounded in stakeholder-driven requirements, the platform emphasizes energy management, which is the top priority among campus administrators and technicians. The development process followed a four-phase methodology: (1) stakeholder consultation and requirement analysis; (2) physical data acquisition and 3D model generation; (3) sensor deployment using IoT technologies with NB-IoT and LoRaWAN protocols; and (4) real-time data integration via Firebase and standardized APIs. A suite of dashboards was developed to support interactive monitoring across faculty, building, floor, and room levels. System testing with campus users demonstrated high usability, intuitive spatial navigation, and actionable insights for energy consumption analysis. Feedback indicated strong interest in features supporting data export and predictive analytics. The platform’s modular and hardware-agnostic architecture enables future extensions, including occupancy tracking, water monitoring, and automated control systems. Overall, the digital twin system offers a replicable and scalable model for data-driven facility management aligned with sustainability goals. Its real-time, multiscale capabilities contribute to operational transparency, resource optimization, and climate-responsive campus governance, setting the foundation for broader applications in smart cities and built environment innovation.
- Open Access
- 9 May 2025
- Published by Springer Nature in npj Heritage Science
- Vol. 13 (1) , 1-12
Inverse analysis for dynamic characteristics of a historic Masonry Pagoda using segmental low-amplitude earthquake vibrations
Historical structures are inherently prone to degradation, necessitating structural health monitoring for their preservation. This study proposes an inverse analysis methodology to determine structural dynamic properties, offering insights into fundamental behavior. The algorithm integrates Newmark’s time-stepping method with the Gauss-Newton scheme for improved accuracy. Its effectiveness is demonstrated using four seismic datasets from distant earthquakes. A Historic Masonry Pagoda in Chiang Mai, Thailand, was monitored via segmental low-amplitude earthquake data. Two 3-directional vibration sensors at the top and base recorded responses during seismic events. Given the low amplitude, each 120-s event was divided into twelve segments for enhanced analysis. The results show that segmenting seismic waves increases output data, reducing uncertainties through probabilistic techniques. As the pagoda’s structural properties remain partially unknown, the derived dynamic properties establish a baseline for future assessments of deterioration.
- 9 May 2025
- Published by Springer Nature in npj Heritage Science
- Vol. 13 (1) , 1-12
Open AccessInverse analysis for dynamic characteristics of a historic Masonry Pagoda using segmental low-amplitude earthquake vibrations
Historical structures are inherently prone to degradation, necessitating structural health monitoring for their preservation. This study proposes an inverse analysis methodology to determine structural dynamic properties, offering insights into fundamental behavior. The algorithm integrates Newmark’s time-stepping method with the Gauss-Newton scheme for improved accuracy. Its effectiveness is demonstrated using four seismic datasets from distant earthquakes. A Historic Masonry Pagoda in Chiang Mai, Thailand, was monitored via segmental low-amplitude earthquake data. Two 3-directional vibration sensors at the top and base recorded responses during seismic events. Given the low amplitude, each 120-s event was divided into twelve segments for enhanced analysis. The results show that segmenting seismic waves increases output data, reducing uncertainties through probabilistic techniques. As the pagoda’s structural properties remain partially unknown, the derived dynamic properties establish a baseline for future assessments of deterioration.
- Open Access
- 31 January 2025
- Published by Faculty of Architecture and Planning, Thammasat University in Journal of Architectural/Planning Research and Studies (JARS)
- Vol. 22 (2) , 271117
Computer Script Development in Dynamo-Revit Software for Building Foundation Design
Building Information Modeling (BIM) technology has transformed the construction industry, offering efficient data management and design processes. This study focuses on applying BIM to foundation design by developing a scripted prototype in Dynamo and Autodesk Revit to calculate the size of shallow foundations. The research integrates Revit for modeling and Dynamo for weight calculation, with the total weight exported to Microsoft Excel for foundation design based on Terzaghi’s bearing capacity theory. A closed-form cubic equation rapidly and accurately determined the foundation size. Unlike traditional hand calculations, the developed script offers faster and more precise results. The study highlights the potential of BIM tools to streamline foundation design processes, with the example case of a square-shaped foundation under vertical load in Chiang Mai, Thailand. Future research could explore the application of this method across various soil types and more complex building models.
- 31 January 2025
- Published by Faculty of Architecture and Planning, Thammasat University in Journal of Architectural/Planning Research and Studies (JARS)
- Vol. 22 (2) , 271117
Open AccessComputer Script Development in Dynamo-Revit Software for Building Foundation Design
Building Information Modeling (BIM) technology has transformed the construction industry, offering efficient data management and design processes. This study focuses on applying BIM to foundation design by developing a scripted prototype in Dynamo and Autodesk Revit to calculate the size of shallow foundations. The research integrates Revit for modeling and Dynamo for weight calculation, with the total weight exported to Microsoft Excel for foundation design based on Terzaghi’s bearing capacity theory. A closed-form cubic equation rapidly and accurately determined the foundation size. Unlike traditional hand calculations, the developed script offers faster and more precise results. The study highlights the potential of BIM tools to streamline foundation design processes, with the example case of a square-shaped foundation under vertical load in Chiang Mai, Thailand. Future research could explore the application of this method across various soil types and more complex building models.
- Open Access
- 25 March 2024
- Published by Elsevier in KSCE Journal of Civil Engineering
- Vol. 28 (7) , 2885-2896
Seismic Safety Analysis of Dam Appurtenant Structures in Northern Thailand
- 25 March 2024
- Published by Elsevier in KSCE Journal of Civil Engineering
- Vol. 28 (7) , 2885-2896
Open AccessSeismic Safety Analysis of Dam Appurtenant Structures in Northern Thailand
- Open Access
- 15 December 2023
- Published by Elsevier in Case Studies in Construction Materials
- Vol. 20, e02794
Characteristic and allowable compressive strengths of Dendrocalamus Sericeus bamboo culms with/without node using artificial neural networks
- 15 December 2023
- Published by Elsevier in Case Studies in Construction Materials
- Vol. 20, e02794
Open AccessCharacteristic and allowable compressive strengths of Dendrocalamus Sericeus bamboo culms with/without node using artificial neural networks