PWPatrick J. West

Patrick J. West

*This is an algorithmically generated author record based on publicly available information.

Patrick J. West has a total of 79 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Lithium-Ion Partial Molar Entropies in Liquid, Composite, and Solid-State Electrolytes

    by Austin Fan, Patrick J. West, Louis Vincent Morris, Dimitrios Fraggedakis, Rachel Carter, Kelsey B. Hatzell

    Electrolyte composition, concentration, and structure can affect reaction kinetics, ion transport, and heat generation during operation. In liquid electrolyte systems, the properties of ion-solvent and ion-ion interactions strongly affect thermodynamics and electrochemistry. The change in total entropy of the electrolyte when one mole of an ion is added to an electrolyte at a constant temperature and pressure is known as the partial molar entropy of ion solvation and describes broadly how the solvation environment changes with the addition or removal of an ion. Herein, we measure the partial molar entropies of lithium-ion solvation in solid-state systems using potentiometric temperature coefficient measurements. For solid-state systems, we measure positive partial molar entropies of lithium-ion solvation of 43.3 J mol-1 K-1 for Li6PS5Cl and 26.4 J mol-1 K-1 for Li6.5La3Zr1.5T0.5O12. In contrast, the liquid electrolyte 1 M LiPF6 in 1:1 vol % EC:DEC exhibits a negative partial molar entropy of -76.0 J mol-1 K-1. A one-dimensional analytical model is developed to elucidate how the temperature coefficient is influenced by the multiple interfaces formed when an inorganic single-ion conductor is combined with a binary liquid electrolyte, providing a unified framework for understanding the partial molar entropies of ion solvation across a wide range of electrochemical systems.

  • Open Access

    First Look at Safety and Performance Evaluation of Commercial Sodium-Ion Batteries

    by Rachel Carter, Gordon H. Waller, Connor Jacob, Dillon Hayman, Patrick J. West, Corey T. Love

    Herein, we investigate the performance and safety of four of the early-stage, commercial Na-ion batteries available in 2024, representing the most popular cathode types across research and commercialization: polyanion (Na-VPF), layered metal oxide (Na-NMF), and a Prussian blue analog (Na-tmCN). The cells deliver a wide range of energy density with Na-tmCN delivering the least (23 Wh/kg) and Na-NMF delivering the most (127 Wh/kg). The Na-VPF cell was in between (47 Wg/kg). Capacity retention under specified cycling conditions and with periodic 0 V excursions was the most robust for the Na-tmCN cells in both cases. Accelerating rate calorimetry (ARC) and nail penetration testing finds that Na-NMF cells do undergo thermal runaway in response to abuse, while the Na-VPF and Na-tmCN exhibit only low self-heating rates (2, CH4, toxic acid gases (HCN, HF, NH3), and typical electrolyte components (carbonate ester solvents). Gases similar to those detected during Li-ion failures were found in addition to HCN for the Na-tmCN cell. Our work compares different types of commercial Na-ion batteries for the first time, allowing for a more holistic comparison of the safety and performance tradeoffs for different Na-ion cathode types emerging in 2024.


  • Open Access

    First Look at Safety and Performance Evaluation of Commercial Sodium-ion Batteries

    by Rachel Carter, Gordon H Waller, Connor Jacob, Dillon Hayman, Patrick J West, Corey T Love

    Herein we investigate the performance and safety of four of the early-stage, commercial Na-ion batteries available in 2024, representing the most popular cathode types across research and commercialization: polyanion (Na-VPF), layered metal oxide (Na-NMF), and Prussian blue analog (Na-tmCN). The cells deliver a wide range of energy density with the Na-tmCN delivering the least (23 Wh/kg) and Na-NMF delivering the most (127 Wh/kg). Capacity retention under specified cycling conditions and with periodic 0V excursions was the most robust for the Na-tmCN cells in both cases. Accelerating rate calorimetry (ARC) and nail penetration testing finds that Na-NMF cells do undergo thermal runaway in response to abuse, while the Na-VPF and Na-tmCN exhibit only low self-heating rates (<1 °C/min). During these safety tests, all cells exhibited off-gassing, so we conducted in-line FTIR equipped with a heated gas cell to detect CO, CO2, CH4, toxic acid gases (HCN, HF, NH3), and typical electrolyte components (carbonate ester solvents). Gases similar to those detected during Li-ion failures were found in addition to HCN for the Na-tmCN cell. Our work compares different types of commercial Na-ion batteries for the first time allowing for a more wholistic comparison of the safety and performance tradeoffs for different Na-ion cathode types emerging in 2024.

  • Thermo-electrochemical characterization of a commercial LiNi0.8Co0.15Al0.05O2 /Graphite+Si 18650 cell

    by Patrick J. West, Nicolas Leport, Dillon Hayman, Rachel Carter, Corey T. Love, Laurent Pilon, Gordon H. Waller


  • Open Access

    Capacity Fade of Graphite/NMC811: Influence of Particle Morphology, Electrolyte, and Charge Voltage

    by Calvin D. Quilty, Jessica Luo, Armando Rodriguez-Campos, Sizhan Liu, Patrick J. West, Xiao Tong, Andrew Kiss, Yang Yang, Cherno Jaye, Daniel A. Fischer, et al.

    LiNi0.8Mn0.1Co0.1O2 (NMC811) is an important Li-ion battery cathode material; however, there is a tradeoff between delivered capacity and capacity retention. As the charge potential increases the capacity rises but at the expense of capacity retention. The decrease in capacity retention has been ascribed to several factors including particle cracking, surface reconstruction, transition metal dissolution, and electrolyte reactivity. The present study compares 4.1 and 4.3 V charging limits in commercially relevant graphite/NMC811 pouch cells for single crystal (SC) and polycrystalline (PC) NMC811 with ethylene carbonate (EC)-containing or EC-free electrolytes. The electrochemistry is rationalized through analysis of electrochemical impedance spectroscopy, positive electrode X-ray photoelectron spectroscopy, soft X-ray absorption spectroscopy, X-ray diffraction, and negative electrode mapping by X-ray fluorescence. Graphite/SC-NMC811 cells show high-capacity retention at 4.1 V but exhibit degradation at 4.3 V charging potentials. The EC-free electrolyte cells led to higher capacity fade, especially when charged to 4.3 V. Cathode dissolution and deposition on the negative electrode from PC-NMC811 cells was higher than for samples from SC-NMC811 cells. This study reveals the impact of material type, charge voltage, and electrolyte composition on the reactions at the positive electrode, their influence on the negative electrode, and evolution with cycle number.


  • Origin of Phase Separation in Ni-Rich Layered Oxide Cathode Materials During Electrochemical Cycling

    by Sizhan Liu, Patrick J. West, Hui Zhong, Jianming Bai, Eli Stavitski, Denis Leshchev, Amy C. Marschilok, Esther S. Takeuchi, David C. Bock, Kenneth J. Takeuchi


  • Open Access

    Degradation in Ni-Rich LiNi1–x–yMnxCoyO2/Graphite Batteries: Impact of Charge Voltage and Ni Content

    by Patrick J. West, Calvin D. Quilty, Zhongling Wang, Steven N. Ehrlich, Lu Ma, Cherno Jaye, Daniel A. Fischer, Xiao Tong, Andrew M. Kiss, Esther S. Takeuchi, et al.


  • Open Access

    Design principles for heterointerfacial alloying kinetics at metallic anodes in rechargeable batteries

    by Jingxu Zheng, Yue Deng, Wenzao Li, Jiefu Yin, Patrick J. West, Tian Tang, Xiao Tong, David C. Bock, Shuo Jin, Qing Zhao, et al.

    How surface chemistry influences reactions occurring thereupon has been a long-standing question of broad scientific and technological interest. Here, we consider the relation between the surface chemistry at interfaces and the reversibility of electrochemical transformations at rechargeable battery electrodes. Using Zn as a model system, we report that a moderate strength of chemical interaction between the deposit and the substrate—neither too weak nor too strong—enables highest reversibility and stability of the plating/stripping redox processes. Focused ion beam and electron microscopy were used to directly probe the morphology, chemistry, and crystallography of heterointerfaces of distinct natures. Analogous to the empirical Sabatier principle for chemical heterogeneous catalysis, our findings arise from competing interfacial processes. Using full batteries with stringent negative electrode–to–positive electrode capacity (N:P) ratios, we show that such knowledge provides a powerful tool for designing key materials in highly reversible battery systems based on Earth-abundant, low-cost metals such as Zn and Na.


  • Multimodal electrochemistry coupled microcalorimetric and X-ray probing of the capacity fade mechanisms of Nickel rich NMC – progress and outlook

    by Calvin D. Quilty, Patrick J. West, Wenzao Li, Mikaela R. Dunkin, Garrett P. Wheeler, Steven Ehrlich, Lu Ma, Cherno Jaye, Daniel A. Fischer, Esther S. Takeuchi, et al.

    Combining calorimetry with hard and soft X-ray characterization elucidates bulk and surface phenomena responsible for capacity fade in LiNi0.8Mn0.1Co0.1O2 cathodes.


  • Elucidating Cathode Degradation Mechanisms in LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811)/Graphite Cells Under Fast Charge Rates Using Operando Synchrotron Characterization

    by Calvin D. Quilty, Patrick J. West, Garrett P. Wheeler, Lisa M. Housel, Christopher J. Kern, Killian R. Tallman, Lu Ma, Steven Ehrlich, Cherno Jaye, Daniel A. Fischer, et al.

    Li-ion batteries capable of extreme fast charging (XFC) are in demand to facilitate widespread electric vehicle (EV) adoption. While the impact of fast charge on the negative electrode has been studied, degradation of state-of-the-art NMC811 under XFC conditions has not been studied in detail. Herein, cathode degradation is probed in NMC811/graphite batteries by analysis of structural and chemical changes for recovered samples previously cycled under XFC conditions and during typical cycling. NMC surface reconstruction, as determined by soft X-ray absorption, was not detected for recovered electrodes. However, bulk redox activity from X-ray absorption near edge structure measurements showed more change in the oxidation state of Ni and Co under the 1C charge rate compared to the 4C rate consistent with the electrochemistry. Increased unit cell volume contraction under the 1C rate as determined by operando X-ray diffraction suggests that higher charge rates may provide a protective effect on the cathode by reducing structural distortion due to less delithiation.