SKSmail Khalfallah

Smail Khalfallah

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Smail Khalfallah has a total of 37 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • A cooling technique for small-scale radial turbines: experimental and numerical investigation

    by Younes Ziad, Smail Khalfallah, Francesco Balduzzi, Abdelhak El Fergougui, Abdelkhalek Henniche, Lamine Rebhi, Mahfoudh Cerdoun

  • An aeroacoustic design approach using meta-model-based optimization: Application to vertical axis wind turbines

    by Ahmed Chafik Guermache, Smail Khalfallah, Ayoub Talamalek, Salh Eddine Derbal, Takfarines Ait Ali, Abdelwahid Boutemedjet

    Acoustic requirement of wind turbines can be efficiently meted using optimal design methods, which balance aerodynamic and acoustic goals. Yet, considering an additional discipline in optimization drastically increases the total cost. This paper proposes a cost-effective design optimization approach based on enhanced methods for both formulation and solution. Therefore, the problem is formulated using the MASSOUD deformation-based method, and then solved based on the cost-effective meta-models. The latter are constructed using an improved radial basis function (RBF) and an adaptive sampling, which is generated starting with a Latin hypercube database and enriched iteratively based on an exploration/exploitation criterion. The evaluation of the database is achieved by the validated aero-acoustics (CFD-CAA) simulations. The trained meta-model is coupled with the multi-objective algorithm NSGA-II in order to maximize the power coefficient and reduce the generated noise. The results show a maximum increase of 22% in the power coefficient at a tip speed ratio of 3.2. A consistent attenuation of higher-order tonal components is observed for all optimized configurations, with significant reductions at the second and third harmonics Moreover, the acoustic outcomes exhibit strong directional dependency. Noise reduction is observed in the upstream rotor region, accompanied by increased noise levels in the downstream zone. These findings are supported by detailed flow field analyses, which reveal the mechanisms governing aero-acoustics behavior.


  • Design optimization of a four-wheeled robot chassis frame based on artificial neural network

    by Lamine Rebhi, Smail Khalfallah, Amani Hamel, Ahmed Bouzar Essaidi

    Optimizing robotic structures to endure random fatigue conditions represents a critical challenge in robotic design. This paper introduces an advanced optimization strategy specifically for robotic structures subjected to random base excitations (RBE). The approach aims to enhance structural performance and reliability under unpredictable conditions. The proposed methodology features an efficient problem formulation and employs a meta-model-based optimization (MBO) technique, validated through the analysis of a robotic structure’s fatigue life under RBE. Structural vibration responses to RBE are assessed using finite element method (FEM), which includes the computation of participation factors to quantify each mode’s contribution to the overall structural response. A frequency transfer function is then developed to link input excitations with the resulting structural behavior. Experimental validation in the laboratory confirms the accuracy of the FEM predictions for structures under RBE. The MBO approach is applied to a robot chassis, aiming to minimize its total mass while respecting constraints on maximum equivalent stress and fatigue life. Random vibrations caused by road roughness are simulated to evaluate the chassis response in terms of power spectral densities (PSD) of Von Mises equivalent stress, calculated for different chassis elements. A database is generated through co-simulation with ANSYS and MATLAB, computing fatigue life using the Dirlik model for various design variables. This database supports the development of a radial basis function (RBF) based neural network meta-model for constraint evaluation in the optimization process. Two MBO strategies, sequential and adaptive, are tested. The sequential approach required a significantly large dataset yet failed to achieve target accuracy, showing an uncertainty of over 43%, rendering it unsuitable. In contrast, the adaptive approach achieved the desired accuracy with an uncertainty of less than 0.22%, using only 2% of the dataset required by the sequential approach. This adaptive strategy enabled a substantial reduction in chassis mass while maintaining fatigue life. Moreover, optimization results showed no significant changes when different optimization techniques are applied.


  • Open Access

    A design optimization strategy of an aircraft composite wing-box based on a multi-scale FEA

    by Soufiane Farah, Smail Khalfallah, Abdelwahid Boutemedjet, Lamine Rebhi

    Design optimization of composite wings is a complex problem that involves numerous material and shape parameters. This paper proposes two ideas to solve such a problem effectively, namely, the right-complex formulation of the optimization problem and the use of multi-scale finite element analysis (FEA). The first idea is achieved following a V scheme (descendant ascendant scheme). In the descent, the complexity of the problem is reduced to the lowest level (lowest-complex formulation), which may not be sufficient to get potential solutions. Accordingly, an adaptive process is performed, progressively increasing complexity by adding new variables until reaching the right-complex formulation. The multi-scale FEA combined global and local Finite Element Method (FEM) analyses. The global one analyses the static of the global domain, which reveals the most critical panel. The latter analyses the buckling phenomenon locally and more accurately. This strategy is validated by optimizing a composite wing box from the literature and considering a well-known zone-based formulation. Therefore, the lowest-complex formulation is defined with the minimum possible number of wing zones, then adjusted by increasing iteratively the wing zone number. This process is stopped when the optimal solution becomes invariant. This application seeks to minimize the wing mass under many constraints, such as the maximum Von Mises stress. The problem is solved by coupling a Genetic Algorithm (GA) optimizer with the multi-scale FEA. Results showed that the adopted strategy detected the right-complex formulation, which significantly increased the computation time while gaining considerably in the wing mass with respect to the resistance strength criteria.


  • Multi-fidelity multidisciplinary meta-model based optimization of a slender body with fins

    by Saidi Noureddine, Derbal Salh Eddine, Andrea Magrini, Khalfallah Smail, Cerdoun Mahfoudh, Ernesto Benini

    Multidisciplinary design optimization (MDO) involving aero-elastic simulations still proves challenging for computational cost. This paper proposes a competitive cost-effective multi-fidelity MDO strategy based on two ideas. Firstly, a new multi-fidelity fluid-structure interaction model (MF-FSI) is proposed, allowing a considerable saving of the FSI simulation cost. Secondly, the optimization cost is further reduced using a meta-model approximation of the MF-FSI computations during optimization. Therefore, the MF-FSI model is validated on an experimental case of supersonic projectile fins. Then, it is combined with a meta-model-based optimization strategy (MBO) to improve the fins design. The constrained multi-objective problem aiming to maximize the lift-to-drag ratio and minimize the fin mass is solved using both high-fidelity (HFMDO) and multi-fidelity (MFMDO). The results showed that the proposed MFMDO strategy could produce the same optimal solutions as the HFMDO one with a 52% lower cost.


  • Numerical and experimental investigation of a cooling technique of a turbocharger radial turbine

    by Younes Ziad, Smail Khalfallah, Abderrahmane Chenafi, Abdelmadjid Belmokhtar, Mahfoudh Cerdoun, Houssem Habbouche


  • A multi-objective optimization strategy based on combined meta-models: Application to a wind turbine

    by Abdelwahid Boutemedjet, Smail Khalfallah, Mahfoudh Cerdoun, Abdelkader Benaouali

    Many types of optimization problems involving expensive functions have been handled successfully by meta-model-based optimization (MBO) methods. However, some particular difficult problems, such as multimodal functions, which require an accurate approximation even around local optima, still prove challenging for MBO. Generally, this type of problems is solved by combining or assembling meta-models. This paper proposes a new strategy of combining a global meta-model with many mid-range ones. The latter are constructed on sub-regions where the global meta-model is inaccurate. These mid-range meta-models are constructed in two phases. The first phase aims to explore accurately all the design space; whereas the second phase aims to provide more accurate solutions than those of the global meta-model on regions of interest (exploitation). The set of sub-regions can be updated adaptively until reaching the meta-model target accuracy. This two phases’ adaptive process prevents the over sampling of non-interesting regions, which allows gaining significantly in the cost. The proposed strategy is tested using the following techniques: Radial basis function (RBF) and Non-dominated Sorting Genetic Algorithm (NSGA-II). This strategy is tested both on difficult mathematical benchmarks and on an engineering application giving satisfactory results. The considered engineering application aims to optimize the operation of a vertical axe wind turbine.


  • Optimization of a land vehicle suspension subjected to a buried charge explosion

    by Zakaria Titri, Belkacem Bounab, M Abderaouf Louar, Smail Khalfallah, Paweł Baranowski

    Improvised Explosive Devices (IEDs) represent a serious threat to vehicles. These IEDs can partially or fully damage the vehicle and the onboard equipment and, threaten the lives of its crew. To protect against these devices, modifications to specialized vehicles are made in different parts. Among these latter, the present work focuses on the effects of the suspension system on the dynamic response of the vehicle. The behaviour of a McPherson suspension system of a light vehicle is numerically studied in order to optimize the dimensions of selected components. Three models based on different approaches are developed. The first is based on an Arbitrary Lagrangian Eulerian (ALE) formulation with fluid-structure coupling, which gives a more realistic representation of the blast phenomena. However, it needs significant calculation time and computational power. The second is a simplified, purely Lagrangian, model which requires less computational resources but includes several assumptions. The third model is based on a meta-modelling approach. This latter is used to optimize the dimensions of selected sub-systems of the vehicle suspension via a genetic optimization algorithm.


  • Robust optimization of the aerodynamic design of a helicopter rotor blade based on multi-fidelity meta-models

    by Derbal Salh Eddine, Khalfallah Smail, Cerdoun Mahfoudh, Tarabet Lyes

    Robust optimization (RO) of designs becomes indispensable to deal with inherent manufacturing uncertainties. Yet, RO is still too expensive to solve complex problems such as the design of helicopter rotor blades. A promising way to reduce this cost is to use the multi-fidelity meta-model-based optimization (MFMBO), which combines low fidelity models (LFM), high fidelity models (HFM), meta-models, design of experiment (DoE), and optimization techniques. The field of MFMBO is not been completely explored despite the high number of proposed strategies. This paper contributes to the MFMBO cost-effectiveness improvement by proposing a new strategy. The main feature of the latter is the mutual adaptive refinement of the HFM and LFM DoE sets. A new idea is proposed to generate initial nested DoEs, which is implemented using an ordinary and an optimal Latin Hyper Cube method. These DoEs are refined adaptively and mutually using an improved MaxMin-distance criterion. The expensive HFM is used only to define a correction C of the LFM. C is used to adjust LFM evaluations during MBO. Meta-models are constructed using the Radial Basis Functions technique. The strategy is tested with two RO techniques, namely, the Non-Dominated Sorting Genetic Algorithm (NSGA-II) and the Multi-Objective Evolutionary Algorithm Based on Decomposition (MOEA/D). The implemented strategy is validated on three different mathematical benchmarks, compared with four different MFMBO strategies and applied on a helicopter rotor blade. This validation shows that the proposed MFMBO is competitive and can produce solutions as accurate as the HFM-based MBO while reducing significantly the overall computation time (up to 40%).