KNKei Nakayama

Kei Nakayama

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Kei Nakayama has a total of 81 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Atomic-scale STEM characterization of Li-ion battery materials using orientation-controlled single-crystalline specimens

    by Kei Nakayama

    Active materials in Li-ion batteries often undergo local structural changes during the (de)lithiation process, which can strongly influence their electrochemical performance. STEM is a powerful tool for investigating these changes because of its atomic-scale spatial resolution. However, atomic-resolution analysis of conventional powder samples, typically obtained from disassembled batteries, is often limited by observation directions that deviate from the low-index zone axes and overlap with other battery components. This Mini Review introduces an alternative approach based on orientation-controlled single-crystalline lamellae prepared from millimeter-scale single crystals with well-defined crystallographic orientations. Atomic-resolution STEM observations of these lamellae revealed irreversible local structural changes induced by the delithiation of Li2MnO3 and LiCoO2. In addition, in situ observations enabled direct visualization of the sequential evolution of the domain structure in MoS2 during lithiation.

  • Switchable Polarization in an A-Site Deficient Perovskite through Vacancy and Cation Engineering

    by Suguru Yoshida, Olivier Hernandez, Jinsuke Miyake, Kei Nakayama, Ryo Ishikawa, Hajime Hojo, Yuichi Ikuhara, Venkatraman Gopalan, Katsuhisa Tanaka, Koji Fujita

    While defects are unavoidable in crystals and often detrimental to material performance, they can be a key ingredient for inducing functionalities when tailored. Here, we show that an A-site-deficient perovskite Y1/3TaO3 exhibits switching-like polarization response at room temperature in the Pb21m phase, enabled by ordered vacancies coupled with TaO6 octahedral rotations. Defect-ordered perovskites are frequently trapped in centrosymmetric incommensurate states due to competing structural instabilities; we circumvent this by favoring rotational over off-centering instability through compositional selection. Unlike canonical improper ferroelectrics that are ferrielectric, the vanishing dipoles on vacancy layers in Y1/3TaO3 allow for a net ferroelectric alignment of local dipoles, resulting in enhanced polarization. Upon heating, Y1/3TaO3 transforms to a paraelectric incommensurate phase at ≃750 K, whose atomic arrangement mirrors the domain topology observed in hybrid improper ferroelectrics. Superspace analysis of the modulated phase reveals a route to improve room-temperature polarization, achieved through epitaxial strain, as confirmed by our lattice-dynamics calculations. This defect-ordering strategy should be generalizable to other improper ferroelectrics, including magnetoelectric multiferroics, providing a pathway to amplify otherwise limited macroscopic polarization.


  • Open Access

    Atomic-Scale In Situ Scanning Transmission Electron Microscopy of MoS2 during Lithiation

    by Kei Nakayama, Shunsuke Kobayashi

    Atomic-scale in situ characterization techniques are necessary to clarify the dynamic local structural changes during intercalation reactions. High-resolution transmission electron microscopy (HRTEM) is at the forefront of this field. However, the image contrast in HRTEM is not always straightforward, necessitating the exploration of alternative imaging techniques. Here, using annular dark-field (ADF) scanning transmission electron microscopy (STEM), which is expected to provide a more directly interpretable image contrast, we report atomic-scale in situ observation of the MoS2 lithiation process induced by electron irradiation. Using a single-crystalline specimen, dedicated specimen holder, and alternate low- and high-magnification image acquisition technique, a time series of ADF-STEM images was recorded at a frame rate of 1 fps, followed by image filtering. Consequently, successive changes in the domain structure were clarified, starting with an anisotropically expanding structural phase transition, followed by the disappearance and formation of domains with different crystal orientations, which were attributed to changes in the internal stress and interfacial energy.


  • Open Access

    Controllable Crystalline Phases of Multi‐Cation Oxides

    by Takafumi Ogawa, Makoto Tanaka, Naoki Kawashima, Taishi Ito, Kei Nakayama, Takeharu Kato, Satoshi Kitaoka

    Multi‐cation oxides have been extensively studied over the past decade for various solid‐state applications. The source of their functionality lies in a wide compositional search space derived from countless cation combinations and diverse crystal structures formed in metal oxides. However, due to the vast space and complexity of structure control, material exploration has been limited to dispersed compositions under different synthesis conditions, hindering their systematic understanding and rational design. Here, a crystalline‐phase map of multi‐cation rare‐earth titanates is reported, where three types of crystals, i.e., cubic and hexagonal, and orthorhombic phases, emerge depending on the composition and temperature and exhibit systematic changes. The crystal structures of each phase are thoroughly characterized with X‐ray diffraction, electron microscopy, and first‐principles calculations. The configurational entropies calculated from the crystallographic information support the phase‐boundary shift between hexagonal and orthorhombic phases observed in the phase map. Further, a machine learning procedure is proposed for constructing the map from sparse experimental data, allowing predictive exploration for stable crystalline phases across a large compositional space. These findings may facilitate the design of multi‐cation oxides with a desired structure dispersed in a large search space.


  • Epitaxial Growth of Triple-Layered Brownmillerite Cobalt Oxide Sr4Co3O9

    by Hao-Bo Li, Shunsuke Kobayashi, Weitao Yan, Binjie Chen, Tong Zhu, Morito Namba, Yoshinori Kotani, Hiroshi Takatsu, Takahito Terashima, Kei Nakayama, et al.

    Layered perovskite oxides with the Ruddlesden-Popper (RP) structure exhibit diverse functionalities, yet the synthesis of cobalt-based RP oxides is hindered by competing phase formation. In this study, we successfully synthesized Sr4Co3O9, a triple-layered cobalt oxide with a layered brownmillerite structure, as an epitaxial thin film on a LaAlO3 substrate. Soft X-ray absorption spectra confirmed oxygen nonstoichiometry and a mixed-valence state of Co3.3+ while scanning transmission electron microscopy revealed the presence of a tetrahedral layer in the central perovskite block. The structural comparison indicates that unlike conventional brownmillerite A2B2O5, the triple-layered A4B3O9 phase features axially elongated octahedra with significant B-site off-centering, driven by Coulomb repulsion from the tetrahedral B cations. Density functional calculations suggest a charge-ordered antiferromagnetic state. The thermal power of Sr4Co3O9 is lower compared to other layered cobalt oxides, such as NaxCoO2. Our results demonstrate the impact of structural modulation in layered brownmillerite oxides, offering a perspective for designing functional materials.


  • Asymmetric Atomic Coordination of Platinum Skin Layer on Intermetallic Platinum–Cobalt Particles

    by Shunsuke Kobayashi, Yuki Omori, Kei Nakayama, Kousuke Ooe, Hsin-Hui Huang, Akihide Kuwabara

    Pt-based intermetallic alloy particles with a Pt skin layer have higher catalytic activity than solid-solution alloy particles and have attracted considerable attention for practical applications in polymer electrolyte fuel cells. However, the reason for the superior performance of intermetallic alloys is not yet fully understood. Because the catalytic reaction proceeds on the topmost surface of the particle, it is necessary to clarify the relationship between the periodic structure of the intermetallic alloy and the Pt atomic coordination on the surface. This study investigated the Pt-Pt interatomic distance of a Pt skin layer formed on intermetallic Pt3Co particles at atomic resolution through precise measurements using scanning transmission electron microscopy and theoretical calculations. The Pt atomic coordination on the surface shows good agreement between experimental observations and theoretical models, although the experimental image is a projection and thus provides indirect results. The theoretical calculation model revealed that structural relaxation at the Pt and Pt3Co interfaces led to two distinct Pt bonding states at the surface, including asymmetric atomic coordination. The asymmetric coordination of the Pt site deepens the d-band center, diversifies the oxygen adsorption energies, and enhances catalytic activity. Further exploration and control of the unique surface Pt coordination environments formed on the periodic structures of intermetallic alloys should reveal promising routes for the development of catalytic particles.


  • Open Access

    Composite anode for fluoride-ion batteries using alloy formation and phase separation in charge and discharge processes

    by Kei Nakayama, Hidenori Miki, Takashi Nakagawa, Kousuke Noi, Yoshihiro Sugawara, Shunsuke Kobayashi, Katsutoshi Sakurai, Hideki Iba, Akihide Kuwabara, Yuichi Ikuhara, et al.

    For fluoride-ion batteries, (In + LaF 3 -based material) anodes are proposed, and reversible alloy formation during charge and discharge is demonstrated. Such formation helps shift the redox potentials of anodes to prevent electrolyte decomposition.


  • Highly Durable Bifunctional Gas Diffusion Electrodes Fabricated with Melilite-Type Fe/Co/Ni-Mixed Oxide Electrocatalysts

    by Satoshi Ogawa, Kei Nakayama, Misaki Katayama, Ryo Ishikawa, Yuichi Ikuhara, Miwa Saito, Teruki Motohashi