BGBharat Kumar Gehlot

Bharat Kumar Gehlot

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Bharat Kumar Gehlot has a total of 255 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Spectral modelling of Cygnus A between 110 and 250 MHz

    by E. Ceccotti, A. R. Offringa, L. V. E. Koopmans, F. G. Mertens, M. Mevius, A. Acharya, S. A. Brackenhoff, B. Ciardi, B. K. Gehlot, R. Ghara, et al.

    Studying the redshifted 21-cm signal from the neutral hydrogen during the Epoch of Reionisation and Cosmic Dawn is fundamental for understanding the physics of the early universe. One of the challenges that 21-cm experiments face is the contamination by bright foreground sources, such as Cygnus A, for which accurate spatial and spectral models are needed to minimise the residual contamination after their removal. In this work, we develop a new, high-resolution model of Cygnus A using Low Frequency Array (LOFAR) observations in the 110–250 MHz range, improving upon previous models by incorporating physical spectral information through the forced-spectrum method during multi-frequency deconvolution. This approach addresses the limitations of earlier models by providing a more accurate representation of the complex structure and spectral behaviour of Cygnus A, including the spectral turnover in its brightest hotspots. The impact of this new model on the LOFAR 21-cm signal power spectrum is assessed by comparing it with both simulated and observed North Celestial Pole datasets. Significant improvements are observed in the cylindrical power spectrum along the Cygnus A direction, highlighting the importance of having spectrally accurate models of the brightest foreground sources. However, this improvement is washed out in the spherical power spectrum, where we measure differences of a few hundred mK at k < 0.63 h cMpc−1, but not statistically significant. The results suggest that other systematic effects must be mitigated before a substantial impact on 21-cm power spectrum can be achieved.


  • Open Access

    Beyond the horizon: Quantifying the full sky foreground wedge in the cylindrical power spectrum

    by S. Munshi, F. G. Mertens, L. V. E. Koopmans, A. R. Offringa, E. Ceccotti, S. A. Brackenhoff, J. K. Chege, B. K. Gehlot, S. Ghosh, C. Höfer, et al.

    One of the main obstacles preventing the detection of the redshifted 21 cm signal from neutral hydrogen in the early Universe is the astrophysical foreground emission, which is several orders of magnitude brighter than the signal. The foregrounds, due to their smooth spectra, are expected to predominantly occupy a region in the cylindrical power spectrum known as the foreground wedge. However, the conventional equations describing the extent of the foreground wedge are derived under a flat-sky approximation. This assumption breaks down for tracking wide-field instruments, thus rendering these equations inapplicable in these situations. In this paper we derive equations for the full sky foreground wedge, and show that the foregrounds can potentially extend far beyond what the conventional equations suggest. We also derive the equations that describe a specific bright source in the cylindrical power spectrum space. The validity of both sets of equations is tested against numerical simulations. Many current and upcoming interferometers (e.g., LOFAR, NenuFAR, MWA, SKA) are wide-field phase-tracking instruments. These equations give us new insights into the nature of foreground contamination in the cylindrical power spectra estimated using wide-field instruments. Additionally, they allow us to accurately associate features in the power spectrum with foregrounds or instrumental effects. The equations are also important for correctly selecting the epoch of reionization (EoR) window for foreground avoidance analyses, and for planning 21 cm observations. In future analyses, we recommend using these updated horizon lines to indicate the foreground wedge in the cylindrical power spectrum accurately. The new equations for generating the updated wedge lines are made available in the Python library, pslines.


  • Open Access

    The impact of lossy data compression on the power spectrum of the high-redshift 21 cm signal with LOFAR

    by J. K. Chege, L. V. E. Koopmans, A. R. Offringa, B. K. Gehlot, S. A. Brackenhoff, E. Ceccotti, S. Ghosh, C. Höfer, F. G. Mertens, M. Mevius, et al.

    Context. Current radio interferometers output multi-petabyte-scale volumes of data per year, making the storage, transfer, and processing of these data a sizeable challenge. This challenge is expected to grow with next-generation telescopes such as the Square Kilometre Array (SKA), which will produce a considerably larger data volume than current instruments. Lossy compression of interferometric data post-correlation can abate this challenge, but any drawbacks from the compression should be well understood in advance. Aims. Lossy data compression reduces the precision of data, introducing additional noise. Since high-redshift (e.g., cosmic dawn or epoch of reionization) 21 cm studies impose strict precision requirements, the impact of this effect on the 21 cm signal power spectrum statistic is investigated in a bid to rule out unwanted systematics. Methods. We applied DYSCO visibility compression, a technique for normalizing and quantizing specifically designed for radio interferometric data, to observed visibilities datasets from the LOFAR telescope as well as simulated ones. The power spectrum of these data was analyzed, and we establish the level of the compression noise in the power spectrum in comparison to the thermal noise. We also examined its coherency behavior by employing the cross-coherence metric. Finally, for optimal compression results, we compared the compression noise obtained from different compression settings to a nominal 21 cm signal power. Results. From a single night of observation, we find that the noise introduced due to the compression is more than five orders of magnitude lower than the thermal noise level in the power spectrum. The noise does not affect calibration. Furthermore, the noise remains subdominant to the noise introduced by the nonlinear calibration algorithm used following random parameter initialization across different runs. The compression noise shows no correlation with the sky signal and has no measurable coherent component, therefore averaging down optimally with the integration of more data. The level of compression error in the power spectrum ultimately depends on the compression settings. Conclusions. DYSCO visibility compression is found to be an insignificant concern for 21 cm power spectrum studies. Hence, data volumes can be safely reduced by factors of ∼4 with insignificant bias to the final power spectrum. Data from SKA-Low will likely be compressible by the same factor as data from LOFAR owing to the similarities of the two instruments. The same technique can be used to compress data from other telescopes, but a small adjustment of the compression parameters might be required.


  • Open Access

    Ionospheric contributions to the excess power in high-redshift 21-cm power-spectrum observations with LOFAR

    by S A Brackenhoff, M Mevius, L V E Koopmans, A Offringa, E Ceccotti, J K Chege, B K Gehlot, S Ghosh, C Höfer, F G Mertens, et al.

    The turbulent ionosphere causes phase shifts to incoming radio waves on a broad range of temporal and spatial scales. When an interferometer is not sufficiently calibrated for the direction-dependent ionospheric effects, the time-varying phase shifts can cause the signal to decorrelate. The ionosphere’s influence over various spatiotemporal scales introduces a baseline-dependent effect on the interferometric array. We study the impact of baseline-dependent decorrelation on high-redshift observations with the Low Frequency Array (LOFAR). Data sets with a range of ionospheric corruptions are simulated using a thin-screen ionosphere model, and calibrated using the state-of-the-art LOFAR epoch of reionization pipeline. For the first time ever, we show the ionospheric impact on various stages of the calibration process including an analysis of the transfer of gain errors from longer to shorter baselines using realistic end-to-end simulations. We find that direction-dependent calibration for source subtraction leaves excess power of up to two orders of magnitude above the thermal noise at the largest spectral scales in the cylindrically averaged autopower spectrum under normal ionospheric conditions. However, we demonstrate that this excess power can be removed through Gaussian process regression, leaving no excess power above the 10 per cent level for a $5~$ km diffractive scale. We conclude that ionospheric errors, in the absence of interactions with other aggravating effects, do not constitute a dominant component in the excess power observed in LOFAR epoch of reionization observations of the North Celestial Pole. Future work should therefore focus on less spectrally smooth effects, such as beam modelling errors.


  • Open Access

    Transient RFI environment of LOFAR-LBA at 72–75 MHz

    by B. K. Gehlot, L. V. E. Koopmans, S. A. Brackenhoff, E. Ceccotti, S. Ghosh, C. Höfer, F. G. Mertens, M. Mevius, S. Munshi, A. R. Offringa, et al.

    Context.Measurement of the highly redshifted and faint 21-cm signal of neutral hydrogen from the Cosmic Dawn and Epoch of Reionisation promises to unveil a wealth of information about the astrophysical processes that governed the structure formation and evolution of the universe during the first billion years of its evolution.Aims.The AARTFAAC Cosmic Explorer (ACE) program utilises the AARTFAAC wide-field imager of LOFAR to measure the power spectrum of the intensity fluctuations of the redshifted 21-cm signal from the Cosmic Dawn atz ∼ 18 corresponding to the global 21-cm absorption feature reported by the EDGES experiment. Radio frequency interference (RFI) from various sources, such as aeroplane communication, contaminates the observed data and it is crucial to exclude the RFI-affected data in the analysis for any reliable detection. In this work, we solely focus on investigating the impact of non-ground-based transient RFI on the analysis of ACE observations.Methods.We use cross-power spectra and cross-coherence metrics to assess the correlation of RFI over time and investigate the level of impact of transient RFI on the 21-cm signal power spectrum estimation.Results.We detected moving sky-based transient RFI sources that cross the field of view within a few minutes and appear to be mainly from aeroplane communication beacons at the location of the LOFAR core in the 72−75 MHz band (a part of the EDGES absorption trough), by inspecting filtered images. We find that this transient RFI is mostly uncorrelated over time and is only expected to dominate over the thermal noise for an extremely deep integration time of 3000 h or more with a hypothetical instrument that is sky temperature dominated at 75 MHz. We find no visible correlation over differentk-modes in Fourier space in the presence of noise for realistic thermal noise scenarios.Conclusions.We conclude that the sky-based transient RFI from aeroplanes, satellites and meteorites at present does not pose a significant concern for the ACE analyses at the current level of sensitivity and after integrating over the available ∼500 h of observed data. However, it is crucial to mitigate or filter such transient RFI for more sensitive experiments aiming for significantly deeper integration.


  • Open Access

    Transient RFI environment of LOFAR-LBA at 72-75 MHz: Impact on ultra-widefield AARTFAAC Cosmic Explorer observations of the redshifted 21-cm signal

    by B. K. Gehlot, L. V. E. Koopmans, S. A. Brackenhoff, E. Ceccotti, S. Ghosh, C. Höfer, F. G. Mertens, M. Mevius, S. Munshi, A. R. Offringa, et al.

    Measurement of the redshifted 21-cm signal of neutral hydrogen from the Cosmic Dawn (CD) and Epoch of Reionisation (EoR) promises to unveil a wealth of information about the astrophysical processes during the first billion years of evolution of the universe. The AARTFAAC Cosmic Explorer (ACE) utilises the AARTFAAC wide-field imager of LOFAR to measure the power spectrum of the intensity fluctuations of the redshifted 21-cm signal from the CD at z~18. The RFI from various sources contaminates the observed data and it is crucial to exclude the RFI-affected data in the analysis for reliable detection. In this work, we investigate the impact of non-ground-based transient RFI using cross-power spectra and cross-coherence metrics to assess the correlation of RFI over time and investigate the level of impact of transient RFI on the ACE 21-cm power spectrum estimation. We detected moving sky-based transient RFI sources that cross the field of view within a few minutes and appear to be mainly from aeroplane communication beacons at the location of the LOFAR core in the 72-75 MHz band, by inspecting filtered images. This transient RFI is mostly uncorrelated over time and is only expected to dominate over the thermal noise for an extremely deep integration time of 3000 hours or more with a hypothetical instrument that is sky temperature dominated at 75 MHz. We find no visible correlation over different k-modes in Fourier space in the presence of noise for realistic thermal noise scenarios. We conclude that the sky-based transient RFI from aeroplanes, satellites and meteorites at present does not pose a significant concern for the ACE analyses at the current level of sensitivity and after integrating over the available 500 hours of observed data. However, it is crucial to mitigate or filter such transient RFI for more sensitive experiments aiming for significantly deeper integration.

  • Open Access

    A novel radio imaging method for physical spectral index modelling

    by E Ceccotti, A R Offringa, L V E Koopmans, R Timmerman, S A Brackenhoff, B K Gehlot, F G Mertens, S Munshi, V N Pandey, R J van Weeren, et al.

    We present a new method, called ‘forced-spectrum fitting’, for physically based spectral modelling of radio sources during deconvolution. This improves upon current common deconvolution fitting methods, which often produce inaccurate spectra. Our method uses any pre-existing spectral index map to assign spectral indices to each model component cleaned during the multifrequency deconvolution of wsclean, where the pre-determined spectrum is fitted. The component magnitude is evaluated by performing a modified weighted linear least-squares fit. We test this method on a simulated LOFAR high-band antenna (HBA) observation of the 3C 196 QSO and a real LOFAR HBA observation of the 4C+55.16 FRI galaxy. We compare the results from the forced-spectrum fitting with traditional joined-channel deconvolution using polynomial fitting. Because no prior spectral information was available for 4C+55.16, we demonstrate a method for extracting spectral indices in the observed frequency band using ‘clustering’. The models generated by the forced-spectrum fitting are used to improve the calibration of the data sets. The final residuals are comparable to existing multifrequency deconvolution methods, but the output model agrees with the provided spectral index map, embedding correct spectral information. While forced-spectrum fitting does not solve the determination of the spectral information itself, it enables the construction of accurate multifrequency models that can be used for wide-band calibration and subtraction.


  • Open Access

    Diffuse sources, clustering, and the excess anisotropy of the radio synchrotron background

    by F J Cowie, A R Offringa, B K Gehlot, J Singal, S Heston, S Horiuchi, D M Lucero

    We present the largest low frequency (120 MHz) arcminute resolution image of the radio synchrotron background (RSB) to date, and its corresponding angular power spectrum of anisotropies (APS) with angular scales ranging from 3○ to 0.3′. We show that the RSB around the North Celestial Pole has a significant excess anisotropy power at all scales over a model of unclustered point sources based on source counts of known source classes. This anisotropy excess, which does not seem attributable to the diffuse Galactic emission, could be linked to the surface brightness excess of the RSB. To better understand the information contained within the measured APS, we model the RSB varying the brightness distribution, size, and angular clustering of potential sources. We show that the observed APS could be produced by a population of faint clustered point sources only if the clustering is extreme and the size of the Gaussian clusters is ≲ 1′. We also show that the observed APS could be produced by a population of faint diffuse sources with sizes ≲ 1′, and this is supported by features present in our image. Both of these cases would also cause an associated surface brightness excess. These classes of sources are in a parameter space not well probed by even the deepest radio surveys to date.


  • Measurements of one-point statistics in 21-cm intensity maps via foreground avoidance strategy

    by Piyanat Kittiwisit, Judd D Bowman, Steven G Murray, Bharat K Gehlot, Daniel C Jacobs, Adam P Beardsley

    Measurements of the one-point probability distribution function and higher-order moments (variance, skewness, and kurtosis) of the high-redshift 21-cm fluctuations are among the most direct statistical probes of the non-Gaussian nature of structure formation and evolution during re-ionization. However, contamination from astrophysical foregrounds and instrument systematics pose significant challenges in measuring these statistics in real observations. In this work, we use forward modelling to investigate the feasibility of measuring 21-cm one-point statistics through a foreground avoidance strategy. Leveraging the characteristic wedge-shape of the foregrounds in k-space, we apply a wedge-cut filtre that removes the foreground contaminated modes from a mock data set based on the Hydrogen Epoch of Re-ionization Array (HERA) instrument, and measure the one-point statistics from the image-space representation of the remaining non-contaminated modes. We experiment with varying degrees of wedge-cutting over different frequency bandwidths and find that the centre of the band is the least susceptible to bias from wedge-cutting. Based on this finding, we introduce a rolling filtre method that allows reconstruction of an optimal wedge-cut 21-cm intensity map over the full bandwidth using outputs from wedge-cutting over multiple sub-bands. We perform Monte Carlo simulations to show that HERA should be able to measure the rise in skewness and kurtosis near the end of re-ionization with the rolling wedge-cut method if foreground leakage from the Fourier transform window function can be controlled.


  • Open Access

    Precision Calibration of Radio Interferometers for 21 cm Cosmology with No Redundancy and Little Knowledge of Antenna Beams and the Radio Sky

    by Aaron Ewall-Wice, Joshua S. Dillon, Bharat Gehlot, Aaron Parsons, Tyler Cox, Daniel C. Jacobs

    We introduce CALibration AMITY (calamity), a precision bandpass calibration method for radio interferometry. calamity can solve for direction-independent gains with arbitrary frequency structure to the high precision required for 21 cm cosmology with minimal knowledge of foregrounds or antenna beams and does not require any degree of redundancy (repeated identical measurements of the same baseline). We have achieved this through two key innovations. First, we model the foregrounds on each baseline independently using a flexible and highly efficient set of basis functions that have minimal overlap with 21 cm modes and enforce spectral smoothness in the calibrated foregrounds. Second, we use an off-the-shelf GPU accelerated API (tensorflow) to solve for per-baseline foregrounds simultaneously with per-frequency antenna gains in a single optimization loop. GPU acceleration is critical for our technique to be able to solve for the large numbers of foreground and gain parameters simultaneously across all frequencies for an interferometer with ≳10 antennas in a reasonable amount of time. In this paper, we give an overview of our technique and, using realistic simulations, demonstrate its performance in solving for and removing pathological gain structures down to 4.5 orders of magnitude below the level of foregrounds and consistent with our simulated thermal noise limit. If readers want to start using calamity now, they can find a tutorial notebook online.