FHFei Hui

Fei Hui

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Fei Hui has a total of 80 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Interfacial Engineering of MoS2 Thin Films for Wettability-Dependent Resistive Switching and Neuromorphic Behaviors

    by Yuhang Yang, Yuan Yu, Cancan Cui, Xin Liu, Yanyong Li, Peisong Liu, Fei Hui

    Recent years have witnessed a surge in the research of memristors as fundamental building blocks for neuromorphic computing, owing to their exceptional ability to emulate the plastic behavior of biological synapses in a high-density, low-power hardware format. These devices are increasingly recognized as the key to achieving efficient artificial neural networks. Two-dimensional (2D) molybdenum disulfide (MoS2) is a premier candidate for artificial synapses due to its atomic scale and tunable electronic properties. However, achieving wafer-scale MoS2 thin films for integrated memristor systems remains a significant challenge. In this work, a scalable strategy combining cetyltrimethylammonium bromide (CTAB)-assisted electrochemical intercalation and oil–water interface self-assembly was developed to fabricate large-area 2H-phase MoS2 thin films. Leveraging the amphiphilic nature of CTAB-functionalized MoS2 nanosheets, continuous Janus-structured MoS2 films with asymmetric wetting properties (hydrophilic vs. hydrophobic) were successfully prepared. Vertical-structured Ag/Janus-structured MoS2/ITO memristors demonstrated robust non-volatile switching with high endurance and long-term retention. The devices successfully emulated biological synaptic behaviors, including short-term and long-term plasticity. Furthermore, the memristors exhibited distinct optoelectronic synergistic modulation under 405 nm illumination, enabling light-sensitive synaptic functions. This work offers a versatile interface engineering route for low-power integrated sensing–memory–computing hardware.


  • Interfacial Engineering of Cs 3 Bi 2 Br 9 /MoS 2 Heterostructure‐based Memristors for Self‐rectifying and Nociceptor Applications

    by Yuan Yu, Yuhang Yang, Yujia Tian, Yanyong Li, Tingting Han, Ya‐Kun Wang, Yue Yuan, Kun Zhou, Xuying Liu, Mario Lanza, et al.

    Halide perovskite‐based memristors have demonstrated great potential in neuromorphic computing, yet their performance remains severely limited by poor stability arising from its abundant grain boundaries and intrinsic defects. In this work, we report lead‐free Cs 3 Bi 2 Br 9 perovskite‐based memristors enabled by interfacial engineering with molybdenum disulfide (MoS 2 ). Acting as a growth template, MoS 2 effectively induces the formation of perovskite films with enhanced crystallinity, superior interface quality, and suppressed defects. The constructed Au/Ag/Cs 3 Bi 2 Br 9 /MoS 2 /ITO memristive device achieves typical self‐rectifying behavior with an ultra‐low set voltage of ∼0.14 V, low set power consumption of 140 nW, and low energy of 300 pJ. Meanwhile, the device demonstrates exceptional cycling stability and low device‐to‐device variability (C V < 6.37%). The experimental and theoretical fittings reveal that the resistive switching mechanism is governed by an Ag + ‐assisted trap‐controlled electronic transport, while the reinforced built‐in electric field endows the device with pronounced self‐rectifying characteristics, thereby effectively suppressing sneak currents in crossbar arrays. The device successfully emulates key nociceptive behaviours of biological pain receptors, including threshold response, adaptation, and hyperalgesia. This study highlights the interfacial engineering enables synergistic optimization of crystallinity and defect states. These findings provide new insights into the design of lead‐free perovskite‐based memristors for bioinspired neuromorphic sensory systems.


  • Molecular crystal memristors

    by Lanhao Qin, Pengfei Guan, Jiefan Shao, Yu Xiao, Yimeng Yu, Jie Su, Conghui Zhang, Yanyong Li, Shenghong Liu, Pengyu Li, et al.

    Memristors have emerged as a promising hardware platform for in-memory computing, but many current devices suffer from channel material degradation during repeated resistive switching. This leads to high energy consumption and limited endurance. Here we introduce a molecular crystal memristor, of which the representative channel material, Sb2O3, possesses a molecular crystal structure where molecular cages are interconnected via van der Waals forces. This unique configuration allows ions to migrate through intermolecular spaces with relatively low energy input, preserving the integrity of the crystal structure even after extensive switching cycles. Our molecular crystal memristor thus exhibits low energy consumption of 26 zJ per operation, with prominent endurance surpassing 109 switching cycles. The device delivers both reconfigurable non-volatile and volatile resistive switching behaviours over a broad range of device scales, from micrometres down to nanometres. Furthermore, we establish the scalability of this technology by fabricating large crossbar arrays on an 8 inch wafer. This enables the successful implementation of reservoir computing on a single CMOS-integrated chip using these memristors, achieving 100% accuracy in dynamic vision recognition.


  • Open Access

    Molecular Crystal Memristor

    by Tianyou Zhai, Lanhao Qin, Pengfei Guan, Jiefan Shao, Yu Xiao, Yimeng Yu, Jie Su, Conghui Zhang, Yanyong Li, Shenghong Liu, et al.

    The emergence of memristors offers a revolutionary solution for achieving in-memory computing at the hardware level. However, existing memristors suffer from the inherent channel materials damage during cyclical resistive switching, rendering excessive energy consumption and poor endurance. Herein we contribute an innovative Molecular Crystal Memristor, of which the representative channel material, Sb2O3, possesses a unique molecular crystal structure where molecular cages are interconnected via van der Waals forces. This distinct arrangement allows for the migration of ions through intermolecular spaces with minimal energy consumption while intactly preserving the pristine crystal structure after cyclical switching. Our Molecular Crystal Memristor thus exhibits incredibly low energy consumption of 26 zJ, with prominent endurance surpassing 109 cycles. Moreover, the memristors consistently demonstrate reconfigurable non-volatile and volatile resistive switching behavior, within a wide device scale from micrometer to nanometer. We also demonstrated their scalability by fabricating massive Mb-level crossbar arrays on an 8-inch wafer. Finally, we realized the Reservoir Computing functionality on a single CMOS-integrated chip made from our Molecular Crystal Memristor, achieving 100% accuracy in dynamic vision recognition. These breakthroughs herald the practical application of memristors in non-von Neumann computing architectures, with the potential to reshape the future of computing technologies.

  • Self‐Assembly of Janus Graphene Oxide via Chemical Breakdown for Scalable High‐Performance Memristors

    by Fei Hui, Conghui Zhang, Huanhuan Yu, Tingting Han, Jonas Weber, Yaqing Shen, Yiping Xiao, Xiaohong Li, Zhijun Zhang, Peisong Liu

    Janus 2D materials have drawn substantial attention recently owing to its extraordinary interface properties and promising applications in optoelectronic devices. However, the scalable fabrication of high‐quality Janus 2D materials is still one of the main obstacles to hinder its implementation in the industry. Herein, a new method (called “chemical breakdown”) is developed to obtain large‐area uniform Janus graphene oxide (J‐GO) films with high‐quality. Moreover, the first application of J‐GO in the field of memristive devices is presented for neuromorphic computing. In particular, crossbar arrays of Ag/J‐GO/Au memristive devices that exhibit threshold resistive switching (RS) with enhanced performance are fabricated, e.g., low leakage current (≈10−12 A), low operation voltage (≈0.3 V), high endurance (>12,000 cycles), and electro‐synaptic plasticity. This work provides a novel strategy to obtain large‐area, continuous and uniform Janus 2D films, and proposes a new application for Janus 2D materials in a hot topic (i.e., neuromorphic computing) within the field of solid‐state microelectronics.


  • Variability of metal/h-BN/metal memristors grown via chemical vapor deposition on different materials

    by Marco A. Villena, Fei Hui, Xianhu Liang, Yuanyuan Shi, Bin Yuan, Xu Jing, Kaichen Zhu, Shaochuan Chen, Mario Lanza


  • Synthesis of large-area multilayer hexagonal boron nitride sheets on iron substrates and its use in resistive switching devices

    by Fei Hui, Marco A Villena, Wenjing Fang, Ang-Yu Lu, Jing Kong, Yuanyuan Shi, Xu Jing, Kaichen Zhu, Mario Lanza

    Hexagonal boron nitride ( h -BN) is an attractive insulating material for nanoelectronic devices due to its high reliability as dielectric and excellent compatibility with other two dimensional (2D) materials (e.g. graphene, MoS 2 ). Multilayer h -BN stacks have been readily grown on Cu and Pt substrates via chemical vapor deposition (CVD) approach, confirming its potential for wafer scale integration. However, the growth of h -BN on other substrates needs to be also achieved in order to expand the use of this material. Recently, the CVD growth of monolayer h -BN on Fe substrates was reported, but it just focused on material structure characterization. Here we present the first fabrication of electronic devices using multilayer h -BN dielectric stacks grown on Fe foils. We fabricate and characterize resistive switching (RS) devices based on Au/Ag/ h -BN/Fe nanojunctions, and observe the coexistence of both volatile and non-volatile RS depending on the electrode to which the bias is applied. The characteristics measured agree well with those simulated via SIM 2 RRAM software and QPC modeling, and the cycle-to-cycle variability is slightly lower than that of transition metal oxide based RS devices.


  • Open Access

    Repeated roll-to-roll transfer of two-dimensional materials by electrochemical delamination

    by M. Hempel, A.-Y. Lu, F. Hui, T. Kpulun, M. Lanza, G. Harris, T. Palacios, J. Kong

    We create graphene/graphene and graphene/hBN structures on EVA/PET by R2R processing and analyze the resulting surface morphologies and electrical properties.