Yi Wang
Research Subjects
Yi Wang has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Chen Yang
ZJU-Hangzhou Global Scientific and Technological Innovation Center, Zhejiang University, Hangzhou, China
3 shared publications - Fangzhou Xia
Department of Mechanical Engineering, Massachusetts Institute of Technology, Cambridge, MA, USA
2 shared publications - Kamal Youcef-Toumi
Mechanical Engineering Department, Massachusetts Institute of Technology (MIT), Cambridge, MA 02139, USA
2 shared publications - Christoph Reuter
Nano analytik GmbH, Ehrenbergstraße 1, 98693 Ilmenau, Germany
1 shared publication - Ivo W. Rangelow
Department of Micro- and Nanoelectronical Systems, Technische Universität Ilmenau, Ehrenbergstraße 29, 98693 Ilmenau, Germany
1 shared publication Kamal Youcef-Toumi
1 shared publication
Latest Publications
- 19 November 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 68 (11) , 11245-11254
Feedback-Assisted Feedforward Hysteresis Compensation: A Unified Approach and Applications to Piezoactuated Nanopositioners
Hysteresis is a nonlinear effect that remarkably deteriorates the performance of smart actuators. To deal with this issue, numerous models have been proposed in the past several decades. However, to date, modeling hysteresis with sufficiently high accuracy is still challenging, since it is usually asymmetric, rate-dependent and amplitude-dependent. Besides, how to efficiently convert the developed models into compensators for control purposes is another primary concern which calls for novel solutions. In this paper, we propose a unified approach to solve these problems. First, a feedback-assisted model inversion method, which functions regardless of the adopted model, is developed and tested under various conditions. Next, by fusing classical models and machine learning techniques into a disturbance estimation framework, it is found that both modeling and control performance can be significantly improved. Experimental validations are then conducted on a piezo-actuated nanopositioner, demonstrating the effectiveness of the proposed method. As the developed model inversion technique requires minimum efforts for implementation, it thus can benefit a wide range of applications where hysteresis effect exists.
- 19 November 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 68 (11) , 11245-11254
Feedback-Assisted Feedforward Hysteresis Compensation: A Unified Approach and Applications to Piezoactuated Nanopositioners
Hysteresis is a nonlinear effect that remarkably deteriorates the performance of smart actuators. To deal with this issue, numerous models have been proposed in the past several decades. However, to date, modeling hysteresis with sufficiently high accuracy is still challenging, since it is usually asymmetric, rate-dependent and amplitude-dependent. Besides, how to efficiently convert the developed models into compensators for control purposes is another primary concern which calls for novel solutions. In this paper, we propose a unified approach to solve these problems. First, a feedback-assisted model inversion method, which functions regardless of the adopted model, is developed and tested under various conditions. Next, by fusing classical models and machine learning techniques into a disturbance estimation framework, it is found that both modeling and control performance can be significantly improved. Experimental validations are then conducted on a piezo-actuated nanopositioner, demonstrating the effectiveness of the proposed method. As the developed model inversion technique requires minimum efforts for implementation, it thus can benefit a wide range of applications where hysteresis effect exists.
- 25 August 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 68 (9) , 8550-8560
Statically Stable Charge Sensing Method for Precise Displacement Estimation of Piezoelectric Stack-Based Nanopositioning
Piezoelectric self-sensing is a promising displacement estimation technique that has captured a broad range of attention since its origin. However, one long-standing and critical issue associated with this technique is its unstable static performance. This issue significantly undermines the sensing accuracy and the long-term reliability, which are primary concerns in industrial applications. In this article, we show that this challenging issue can be finally solved. The proposed solution consists of two steps. First, we develop a novel charge sensing circuit that provides an explicit access to observe any disturbance that might impact the static sensing. Second, by introducing cascaded observers, a self-improvement sensing scheme is developed. High accuracy displacement estimate can, thus, be reconstructed by fusing the reference signal, the observed disturbance, and the original sensing signal together. Experimental validations demonstrate the expected stable performance. The root-mean-square sensing errors are well below 1%. The developed self-sensing technique is a competitive solution for nanopositioning applications, also due to its self-contained, immunity to environmental disturbance, and plug-and-play features.
- 25 August 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 68 (9) , 8550-8560
Statically Stable Charge Sensing Method for Precise Displacement Estimation of Piezoelectric Stack-Based Nanopositioning
Piezoelectric self-sensing is a promising displacement estimation technique that has captured a broad range of attention since its origin. However, one long-standing and critical issue associated with this technique is its unstable static performance. This issue significantly undermines the sensing accuracy and the long-term reliability, which are primary concerns in industrial applications. In this article, we show that this challenging issue can be finally solved. The proposed solution consists of two steps. First, we develop a novel charge sensing circuit that provides an explicit access to observe any disturbance that might impact the static sensing. Second, by introducing cascaded observers, a self-improvement sensing scheme is developed. High accuracy displacement estimate can, thus, be reconstructed by fusing the reference signal, the observed disturbance, and the original sensing signal together. Experimental validations demonstrate the expected stable performance. The root-mean-square sensing errors are well below 1%. The developed self-sensing technique is a competitive solution for nanopositioning applications, also due to its self-contained, immunity to environmental disturbance, and plug-and-play features.
- Open Access
- 14 July 2019
- Published by MDPI AG in Nanomaterials
- Vol. 9 (7) , 1013
Lights Out! Nano-Scale Topography Imaging of Sample Surface in Opaque Liquid Environments with Coated Active Cantilever Probes
Atomic force microscopy is a powerful topography imaging method used widely in nanoscale metrology and manipulation. A conventional Atomic Force Microscope (AFM) utilizes an optical lever system typically composed of a laser source, lenses and a four quadrant photodetector to amplify and measure the deflection of the cantilever probe. This optical method for deflection sensing limits the capability of AFM to obtaining images in transparent environments only. In addition, tapping mode imaging in liquid environments with transparent sample chamber can be difficult for laser-probe alignment due to multiple different refraction indices of materials. Spurious structure resonance can be excited from piezo actuator excitation. Photothermal actuation resolves the resonance confusion but makes optical setup more complicated. In this paper, we present the design and fabrication method of coated active scanning probes with piezoresistive deflection sensing, thermomechanical actuation and thin photoresist polymer surface coating. The newly developed probes are capable of conducting topography imaging in opaque liquids without the need of an optical system. The selected coating can withstand harsh chemical environments with high acidity (e.g., 35% sulfuric acid). The probes are operated in various opaque liquid environments with a custom designed AFM system to demonstrate the imaging performance. The development of coated active probes opens up possibilities for observing samples in their native environments.
- 14 July 2019
- Published by MDPI AG in Nanomaterials
- Vol. 9 (7) , 1013
Open AccessLights Out! Nano-Scale Topography Imaging of Sample Surface in Opaque Liquid Environments with Coated Active Cantilever Probes
Atomic force microscopy is a powerful topography imaging method used widely in nanoscale metrology and manipulation. A conventional Atomic Force Microscope (AFM) utilizes an optical lever system typically composed of a laser source, lenses and a four quadrant photodetector to amplify and measure the deflection of the cantilever probe. This optical method for deflection sensing limits the capability of AFM to obtaining images in transparent environments only. In addition, tapping mode imaging in liquid environments with transparent sample chamber can be difficult for laser-probe alignment due to multiple different refraction indices of materials. Spurious structure resonance can be excited from piezo actuator excitation. Photothermal actuation resolves the resonance confusion but makes optical setup more complicated. In this paper, we present the design and fabrication method of coated active scanning probes with piezoresistive deflection sensing, thermomechanical actuation and thin photoresist polymer surface coating. The newly developed probes are capable of conducting topography imaging in opaque liquids without the need of an optical system. The selected coating can withstand harsh chemical environments with high acidity (e.g., 35% sulfuric acid). The probes are operated in various opaque liquid environments with a custom designed AFM system to demonstrate the imaging performance. The development of coated active probes opens up possibilities for observing samples in their native environments.